Search

Lecturer-researchers, because of the duality of their profession, can introduce students directly to their research. Stimulating student interest through practical research topics enables students to see the relevance of the teaching/learning process and thereby enhance their motivation. As a major societal issue, research on renewable energies is held in great esteem, particularly among young students with a strong interest in environmental issues. The work presented here relates to the realization of a practical class on the testing of a flexible piezoelectric generator studied as part of the 'N-"air"-J' regional research project. The particular characteristic of piezoelectric materials is that they produce electricity when compressed, which means that they can be used in energy recovery devices. The electrical model associated with this type of generator, consisting of an ideal current source in parallel with a linear capacitor and a load resistor, is sufficiently simple to understand following a course on electricity for first-year university students. High school students in their first year of a science and laboratory technology baccalaureate in France have already taken this practical class as part of a dissemination campaign on scientific culture.

We report the use of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) as a transducing material in the fabrication of mechanical-to-electrical conversion devices based on the flexoelectric-like response of this polymer. Devices are made in a cantilever-based three-layer stainless-steel/PEDOT:PSS/top metal electrode configuration to assess the effective transverse flexoelectric coefficient μ 12 ′ . We investigated the influence of the nature of the top electrode in the flexoelectric response comparing samples with gold and aluminum top electrodes and demonstrated the huge impact of adding a small fraction of a second dopant such as xylitol to the PEDOT:PSS polymer blend and the benefits of a post-treatment of the polymer film with ethanol and methanol on the flexoelectric coefficient. The combination of xylitol addition and the rinsing of the polymer films with ethanol and methanol, along with the use of gold as a top electrode, led to a significant improvement of μ 12 ′ to ca. 24 μC m−1, which is in the range of those reported for high permittivity oxide materials. These findings support the use of conjugated polymers as an alternative to inorganic materials in flexoelectric-based applications, where large flexibility is required. [ABSTRACT FROM AUTHOR]

The flexoelectric effect is simply defined as the coupling between the strain gradient and polarization in solid dielectrics. It may be seen as an alternative transduction mechanism to the piezoelectric effect to directly sense the curvature of bent flexible thin structures. In the case of large curvatures, flexible and compliant sensors are required and soft polar elastomers may be suitable for curvature sensing. In this study, we report the flexoelectric characterization of soft semi-crystalline polyurethane (PU) films with thicknesses ranging from 1.7 μm to 350μm. Dynamic bending experiments have been performed on PU films deposited onto rigid steel substrates in the vicinity of the mechanical resonance frequency of the cantilever beams. Quasi-static flexoelectric coefficients of PU films could be obtained by using a classical oscillating model. A global large increase of μ'12 with the decreasing film thickness was found, especially for thicknesses lower than 25 μm. The variation of μ'12 is explained by the presence of a Young’s Modulus gradient through the thickness of PU films. Besides, a concomitant uncommon dramatic decrease in the dielectric constant is observed. The combination of these two effects contributes to enhancing the flexocoupling “F” constant with the decreasing thickness. At last, the potential use of a 6.6 μm-thick soft PU film as a large curvature sensor has been experimentally demonstrated by subjecting a flexible Aluminum foil/Polyethylene terephthalate bilayered cantilever to large deflections. A curvature of about 80m-1 (radius of curvature of ~1.2 cm) could be sensed under low frequency (3 Hz) bending motion. These results may pave the way for the development of low cost and easy to implement soft flexoelectric elastomer-based large curvature sensors on highly flexible metallic structures. [ABSTRACT FROM AUTHOR]

The effects of fluorine-oxygen substitution on dielectric and electromechanical characteristics of lead zirconate titanate ceramics are studied.

Highly flexible lead zirconate titanate, Pb(Zr,Ti)O3 (PZT), thin films have been realized by modified sol-gel process. The transverse piezoelectric coefficient d31 was determined from the tip displacement of bending-mode actuators made of PZT cantilever deposited onto bare or RuO2 coated aluminium substrate (16 µm thick). The influence of the thickness of ruthenium dioxide RuO2 and PZT layers was investigated for Pb(Zr0.57Ti0.43)O3. The modification of Zr/Ti ratio from 40/60 to 60/40 was done for 3 µm thick PZT thin films onto aluminium (Al) and Al/RuO2 substrates. A laser vibrometer was used to measure the beam displacement under controlled electric field. The experimental results were fitted in order to find the piezoelectric coefficient. Very large tip deflections of about 1 mm under low voltage (~8 V) were measured for every cantilevers at the resonance frequency (~180 Hz). For a given Zr/Ti ratio of 58/42, it was found that the addition of a 40 nm thick RuO2 interfacial layer between the aluminium substrate and the PZT layer induces a remarkable increase of the d31 coefficient by a factor of 2.7, thus corresponding to a maximal d31 value of 33 pC/N. These results make the recently developed PZT/Al thin films very attractive for both low frequency bending mode actuating applications and vibrating energy harvesting. [ABSTRACT FROM AUTHOR]

Nonpercolated composites based on polyurethane (PU) filled with low concentrations copper (Cu) powders of varying sizes were studied as electrostrictive materials for mechanical energy harvesting. The dispersion of the fillers within the polymeric matrix was investigated by scanning electron microscopy, and results showed a relatively homogeneous dispersion for the microsized fillers and the existence of agglomerates for their nanosized counterparts. Differential scanning calorimetry measurements displayed that there occurred no interaction between the polymeric matrix and the microsized fillers whereas the nanosized fillers slightly enhanced the glass transition of the soft segments of PU and significantly affected the recrystallization temperature. The dependence of the dielectric properties of the composites as a function of the filler volume fraction and filler size was investigated over a broad range of frequencies, showing an increase in the permittivity when fillers were used. This increase was more pronounced for the composites containing nanosized fillers. The measurement of the harvested current and of the harvested power also demonstrated an enhancement of the energy harvesting capability when nanofillers were employed. From the experimental data, it appeared that the electrostrictive coefficient Q was not proportional to the inverse ratio of the permittivity and the Young modulus for the studied composites. Finally, analytical modeling of the harvested current and of the harvested energy offered an accurate description of the experimental data. [ABSTRACT FROM AUTHOR]

This study reports on the magnetoelectric coupling in a single piezoelectric ceramic disk subjected to both ac and dc magnetic fields perpendicularly applied to the sample's plane. Eddy currents are induced within the electrodes of the ceramic by ac magnetic flux via the Lenz-Faraday equation and yields Lorentz forces and stresses which are transferred to the piezoelectric ceramic. This latter transduces stress into electrical charges through electromechanical coupling in radial mode. The measured output magnetoelectric current could be successfully modeled using piezoelectric equations providing the inductively coupled voltage between the electrodes of the ceramic is taken into account. This voltage originates from the ac magnetic flux through the experimental loop, which is not a perfect short-circuit and yields two other contributions to the total current: piezoelectric current due to the induced electric field and the dielectric loop current. Radial velocity measurements confirmed the distinct contributions to the current. Thus, room temperature magnetic field detection is achievable using this single piezoelectric disk with a good sensitivity and linear response versus dc magnetic field change. [ABSTRACT FROM AUTHOR]

Electrostrictive polymers have demonstrated an ability to convert mechanical energy into electrical energy and vice versa. This energy conversion has been exploited in an extensive range of applications, including sensors and actuators. Recently, electrostrictive polymers have been investigated as electroactive materials for energy harvesting. The present work aims at establishing an analytical modeling based on electrostrictive equations for predicting a current that can be obtained from the first flexural mode of a beam which was attached by the electrostrictive polymers. The study was carried out on polyurethane films, either without filler or filled with nanosized SiC or a carbon nanopowder. Experimental measurements of the harvested current have been compared to the theoretical behavior predicted by the proposed model. A good agreement was observed between the two sets of data, which consequently validated that the modeling can be used to optimize the choice of materials. It was also shown that the incorporation of nanofillers in polyurethane increased the obtained current. [ABSTRACT FROM AUTHOR]

The influence of (Mn, F) and (Mg, F) dopants on the piezoelectric properties of lead zirconate titanate (PZT) ceramic compositions close to the morphotropic phase boundary is investigated. PZT ceramics are prepared by a chemical route based on co-precipitation of oxalates and hydroxides. The acceptor is incorporated into the B site of the materials and the fluorine ion is introduced into anionic sites. The d[SUB33] coefficient, the mechanical quality factor Qm and other properties are measured. Scanning electron microscopy is used to determine the grain size of the materials. Electron spin resonance is used to determine the valency state of Mn in fluorinated PZT ceramics. In Mn doped PZT, the introduction of a fluorine ion makes the poling process easier and increases the piezoelectric coefficients whereas the fluorination of Mg doped PZT constantly leads to hard materials with a lower piezoelectric response. This study shows that (Mn, F) co-doping produces semihard materials with high piezoelectric coefficients. [ABSTRACT FROM AUTHOR]