Search

This research provides a review of seated shot put alongside new data from the Tokyo 2020 Paralympic Games with the aim to understand the latest trends in equipment within a recently established rule set and how key equipment variables may impact performance for athletes in different classifications. First, a review of the literature found that the throwing pole is a key equipment aid that is not well understood, in part due to limitations in testing design. New data from the 2020 Paralympic Games showed inconsistent trends for the use of the throwing pole among athletes, particularly in transitionary classes (F33–34 and F54–55). A two-way analysis of variance found a main effect of classification on performance (p <.001), as well as an interaction effect between pole use and classification on performance (p <.05). Notably, pole users are seen to perform better than non–pole users in Class F32 (p <.05). [ABSTRACT FROM AUTHOR]

For the wheelchair racing population, it is uncertain whether musculoskeletal models using the maximum isometric force-generating capacity of nonathletic, able-bodied individuals are appropriate, as few anthropometric parameters for wheelchair athletes are reported in the literature. In this study, a sensitivity analysis was performed in OpenSim, whereby the maximum isometric force-generating capacity of muscles was adjusted in 25% increments to literature-defined values between scaling factors of 0.25x and 4.0x for 2 elite athletes, at 3 speeds representative of race conditions. Convergence of the solution was used to assess the results. Artificially weakening a model presented unrealistic values, while artificially strengthening a model excessively (4.0x) demonstrated physiologically invalid muscle force values. The ideal scaling factors were 1.5x and 1.75x for each of the athletes, respectively, as was assessed through convergence of the solution. This was similar to the relative difference in limb masses between dual-energy X-Ray absorptiometry data and anthropometric data in the literature (1.49x and 1.70x), suggesting that dual-energy X-ray absorptiometry may be used to estimate the required scaling factors. The reliability of simulations for elite wheelchair racing athletes can be improved by appropriately increasing the maximum isometric force-generating capacity of muscles. [ABSTRACT FROM AUTHOR]

Purpose:Maximal acceleration from standstill has been identified as a key performance indicator in wheelchair rugby; however, the impact of classification and kinematic variables on performance has received limited attention. This study aimed to investigate kinematic variables during maximal acceleration, with level of activity limitation accounted for using sportclassification scores. Methods: Based on their sporting classification scores, which reflect combined trunk, arm, and hand function, 25 elite wheelchair rugby players were analyzed in high-, mid-, and low-point groups before completing five 5-m sprints from a stationary position. Inertial measurement units and video analysis were used to monitor key kinematic variables. Results: Significant differences in kinematic variables were evident across the classification groups, particularly for the first stroke-contact angle (1-way ANOVA F2,122 = 51.5, P < .05) and first stroke time (F2,124 = 18.3, P < .05). High-point players used a first strokecontact angle that was closer to top dead center of the wheel than either other group, while also using a shorter overall stroke time than low-point players. A linear mixed-effects model was used to investigate how kinematic variables influenced performance, with results suggesting that increased release angles (ie, farther around the wheel) and decreased stroke angles resulted in larger peak accelerations. Further investigation revealed that these results are likely influenced by strong relationships for the high-point group, as there was often no clear trend evident for midpoint and low-point groups. Conclusion: Findings show that various propulsion approaches exist across classification groups, with this information potentially informing individual wheelchair setups and training programs. [ABSTRACT FROM AUTHOR]

Ahmun, R.P., R.J. Tong, and P.N. Grimshaw. The effects of acute creatine supplementation on multiple sprint cycling and running performance in rugby players. J. Strength Cond. Res. 19(1):92-97. 2005.--The benefits of creatine (CR) supplementation are well documented, particularly during repeated bouts of high-intensity muscular activity. Most published experiments use mass-supported (cycle ergometry) activities as a means of evaluating creatine's efficacy, therefore minimizing any possible adverse effects of increased body mass associated with CR supplementation. This study aims to use both mass-supported and mass-dependent activities to assess the effectiveness of acute CR supplementation on a group of highly trained rugby players. A randomized, double-blind, crossover research design was utilized, with subjects receiving 20 g*[d.sup.-1] x 5 d of both CR and a glucose placebo (PL). Subjects were assessed via 10 x 6-second Wingate test and a 10 x 40-m sprint test on separate days, presupplementation and postsupplementation. A 28-d washout period separated the two treatments. No significant treatment (p > 0.05) or treatment by test interaction effects (p > 0.05) were observed for peak or minimum power output (W), peak or minimum running velocity (m*[s.sup.-1]), or fatigue index (%). No significant differences (p > 0.05) were found postsupplementation for body mass and percentage body fat. Although statistical significance was not achieved for any of the measured parameters, there were small improvements in performance that may be of benefit to rugby players. KEY WORDS. phosphocreatine, ergogenics, high-intensity exercise

7 children 15 to 30 mo. old participated in a study of 3-dimensional kinematics of overarm throwing. Children of different ages were considered to be at different developmental stages of motor development. Video recordings were digitised and 3-dimensional coordinates established using the DLT algorithm. Qualitative analysis indicated that the children executed either a 'static' or 'dynamic' throwing action. Either could further be classified as 'arm dominated' or 'sequentially linked.' Maximum elbow extension was no more than 163 [degrees] for any child; release velocity was higher for older subjects; and the angle of ball release was large in 'arm-dominated throws' (M = 49 [degrees]) and comparatively smaller in 'sequentially linked' throws (M = 15 [degrees]).

Prescription of wheelchair rugby chairs is difficult due to the range of athlete impairment types and severities in the sport, difficulty in adjusting wheelchair settings, and assessing on-court performance. Currently, elite players rely on experiential knowledge (personal, coaches, and support staff) to select an appropriate set-up. Technological advancements, such as with inertial measurement units and processing algorithms, and representative testing approaches, has improved the potential for assessing set-ups at an individual level. An orthogonal design approach was implemented using an adjustable wheelchair to investigate the effect of seat height, seat depth, seat angle, and tyre pressure on performance, mobility, and propulsion kinematics. Six elite wheelchair rugby players completed testing in nine individually tailored wheelchair set-ups while monitoring both quantitative and qualitative measures of performance. From this testing, a recommended set-up was compared with the current set-up for each individual. A single case-study approach shows how the assessment method identifies parameter settings that can potentially improve performance. Three of six players reported a blind preference for the recommended set-up over the current set-up, whilst remaining players often displayed similar performance between their current and recommended set-ups. This approach can improve upon the current prescription process for rugby wheelchairs. [ABSTRACT FROM AUTHOR]

Due to the detrimental influence of unnecessary mass on performance, racing wheelchair instrumentation used in both competition assessment and research is currently limited. Attaining key kinetic parameters of propulsion can enhance technique and provide athletes with a competitive advantage. This research examined the plausibility of inertial measurement units (IMUs) to estimate propulsion forces, during a simulated wheelchair race start and training. Start propulsion data calculated from an IMU system was compared to reference force plate data; steady state motion data was compared with existing literature. Some agreement in kinetic parameters between IMU data was observed under steady state motion, with data from athletes following a linear force–velocity relationship. In this context, it is important to identify that this cannot be directly compared to the existing literature due to the different methods of force measurement and the lack of data for similar force measurements using IMUs. IMUs were ineffective when used with wheelchairs having spoked wheels. Performance was best for measurements in the direction of motion. Although exact agreement was not observed, the IMU can provide an effective tool in the in-field assessment of propulsion kinetics. [ABSTRACT FROM AUTHOR]

Inertial measurement units (IMUs) provide a practical solution for attaining key performance data for wheelchair sports. The effects of IMU placement position on the identification of propulsion characteristics are unknown. The aim of this study was to determine the variability in the reliability of cycle time measurements (time between hand contacts) across IMU locations on the chair frame (axle housings), and wheels (axle, push rim, outer rim), on both the left and right sides (n = 8). Contacts were defined by spikes in the resultant acceleration data, corresponding to impact between the hands and push rim, and verified against motion capture. Five elite wheelchair racing athletes propelled at racing speeds on a treadmill. Excellent inter-rater Intraclass Correlation Coefficient values indicated high reliability and repeatability for both motion capture and IMU signal analysis approaches (R = 0.997, p < 0.001 and R = 0.990, p < 0.001, respectively). The best results were (as determined by the best between method agreement) were observed for IMUs located on the frame. Detection reliability was positively associated with signal-to-noise ratio of the acceleration data. The IMU assessment approach facilitates an automated processing capability, which is an improvement to the currently used video analysis. [ABSTRACT FROM AUTHOR]

Examines the kinematic variability of video motion analysis in sprint hurdles. Details on biomechanical studies involving interindividual comparisons; Variabilities in different human tasks; Discussions on linear and angular displacements.

Objective: To critically appraise the Biodex System 4 isokinetic dynamometer for strength assessment of children. Methods: Appraisal was based on experiences from two independent laboratories involving testing of 213 children. Issues were recorded and the manufacturer was consulted regarding appropriate solutions. Results: The dynamometer had insufficient height adjustment for alignment of the knee for some children, requiring the construction of padding to better fit the child within the dynamometer. Potential for entrapment of the non-testing leg was evident in the passive and eccentric modes and a leg bracket restraint was constructed. Automated gravity correction did not operate when protocols were linked or data was exported to an external device. Conclusions: Limitations were noted, some of which were applicable to knee strength testing in general and others which were specific to use with children. However, most of these obstacles could be overcome, making the Biodex System 4 suitable for assessment of knee strength in children. [ABSTRACT FROM AUTHOR]

The use of a throwing pole in seated shot put is prevalent across many athletes with varying impairment types in para-athletics and it has been shown to have a large impact on throwing technique. However, the measurement of throwing pole forces in seated shot put has not been reported previously in the research literature, leading to a considerable barrier to a better understanding and optimisation of performance. In this research, the first set of pole force measurements in seated throwing is presented, along with a comparison between two methods for such measurement: a direct load-sensing and a deflection-based method, where the latter requires considerably less specialised equipment than the former. From this, the measurement of pole forces without an instrumented pole is found to be feasible (RMSE < 10%), thus providing a simpler option for the measurement of pole forces in seated throwing. In addition, unexpected resonant pole effects (5–6 Hz) are observed during the throw which may have an interaction with the way athletes apply force to the pole. The methods and findings presented are intended to provide a platform for future research. [ABSTRACT FROM AUTHOR]

The motion of the shoulders, arms and club during the golf swing has often been explained using the 'double pendulum' model. Despite subsequent explanations for the actions of the distal segments of the body, the coordination of more proximal segments during the swing is less well understood. To ascertain the pattern of centre of mass motion and hip and shoulder rotations that result in a high clubhead speed at impact, the swing used in driving from the tee of eight low-handicap golfers was videotaped and analysed using three-dimensional techniques. The shoulders rotated in excess of 90[sup o] during the backswing and, in 75% of the golfers, continued rotating away from the flag as the hips began turning back towards it. This sequential pattern of hip and shoulder rotation indicated that they conformed to the 'summation of speed' principle, which is hypothesized to result in a greater torque being applied to the club before impact. The speed of the drive was also benefited by the centre of mass shifting exclusively in the intended direction of ball flight during impact. [ABSTRACT FROM AUTHOR]