Search

Producing thick films of conducting polymers by a low-cost manufacturing technique would enable new applications. However, removing huge solvent volume from diluted suspension or dispersion (1-3 wt%) in which conducting polymers are typically obtained is a true manufacturing challenge. In this work, a procedure is proposed to quickly remove water from the conducting polymer poly(3,4-ethylenedioxythiophene:poly(4-styrene sulfonate) (PEDOT:PSS) suspension. The PEDOT:PSS suspension is first flocculated with 1 m H2SO4 transforming PEDOT nanoparticles (approximate to 50-500 nm) into soft microparticles. A filtration process inspired by pulp dewatering in a paper machine on a wire mesh with apertures dimension between 60 mu m and 0.5 mm leads to thick free-standing films (approximate to 0.5 mm). Wire mesh clogging that hinders dewatering (known as dead-end filtration) is overcome by adding to the flocculated PEDOT: PSS dispersion carbon fibers that aggregate and form efficient water channels. Moreover, this enables fast formation of thick layers under simple atmospheric pressure filtration, thus making the process truly scalable. Thick freestanding PEDOT films thus obtained are used as electrocatalysts for efficient reduction of oxygen to hydrogen peroxide, a promising green chemical and fuel. The inhomogeneity of the films does not affect their electrochemical function., Funding Agencies: Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU) [2009-00971]; Knut and Alice Wallenberg Foundation (H2O2, Cellfion); Swedish Research Council European Commission [2016-05990, VR 2019-05577]

Demands on the storage of energy have increased for many reasons, in part driven by household photovoltaics, electric grid balancing, along with portable and wearable electronics. These are fast-growing and differentiated applications that need large volume and/or highly distributed electrical energy storage, which then requires environmentally friendly, scalable and flexible materials and manufacturing techniques. However, the limitations on current inorganic technologies have driven research efforts to explore organic and carbon-based alternatives. Here, we report a conducting polymer:cellulose composite that serves as the active material in supercapacitors which has been incorporated into all-printed energy storage devices. These devices exhibit a specific capacitance of approximate to 90 F g(-1) and an excellent cyclability (amp;gt;10 000 cycles). Further, a design concept coined supercapacitors on demand is presented, which is based on a printing-cutting-folding procedure, that provides us with a flexible production protocol to manufacture supercapacitors with adaptable configuration and electrical characteristics., Funding Agencies|Swedish Foundation for Strategic ResearchSwedish Foundation for Strategic Research [GMT14-0058]

State-of-the-art solar energy harvesting systems based on photovoltaic technology require constant illumination for optimal operation. However, weather conditions and solar illumination tend to fluctuate. Here, a device is presented that extracts electrical energy from such light fluctuations. The concept combines light-induced heating of gold nanodisks (acting as plasmonic optical nanoantennas), and an organic pyroelectric copolymer film (poly(vinylidenefluoride-co-trifluoroethylene)), that converts temperature changes into electrical signals. This hybrid device can repeatedly generate current pulses, not only upon the onset of illumination, but also when illumination is blocked. Detailed characterization highlights the key role of the polarization state of the copolymer, while the copolymer thickness has minor influence on performance. The results are fully consistent with plasmon-assisted pyroelectric effects, as corroborated by combined optical and thermal simulations that match the experimental results. Owing to the tunability of plasmonic resonances, the presented concept is compatible with harvesting near infrared light while concurrently maintaining visible transparency., Funding agencies: Wenner-Gren Foundations; Swedish Research Council [2015-05070]; Swedish Foundation for Strategic Research; AForsk Foundation; Royal Swedish Academy of Sciences; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Lin