Search

Zinc oxide-zinc tungstate (ZnO-ZnWO

In this work, we review the last attempts to use nanostructured materials for the enhancement of the chiro-optical effects at the nanoscale. Starting from the numerical design, we review different geometries that exhibit circular dichroic behavior in the far field; we then focus on the new branch of near-field chirality, where numerous nanostructures have been proposed for background-free chiral sensing. The next section reports on nanofabrication methods, with a special focus on self-assembling, cost- and time-efficient techniques. Finally, we review the chiro-optical experiments. Besides conventional extinction-based techniques, we are today able to reveal chiro-optical effects via photothermal behavior and photoluminescence, going down to single nanostructure chirality with sophisticated near-field techniques. We believe that the novel designs, state-of-the-art nanofabrication and modern characterization techniques have come to a stage to provide chiro-optical sensors and light components based on nanostructures.

Photoacoustic signal detection has been used to build a new strategy to determine the mesoscale self-assembly of metal nanoparticles in terms of size distribution and aggregate packing density (metal nanoparticle filling factor). A synergistic approach integrating photoacoustic signal and theoretical studies, validated by conventional light scattering and electron microscopy techniques, allows us to obtain a well-defined morphological interpretation of nanoparticle-based super-aggregates. By pumping light in a complex system, the acousto-thermal effect was listened to, providing information on the aggregation phenomena. Super-aggregates of covalently interconnected silver nanoparticles (AgNPs) functionalized with an organometallic dithiol are identified in solution, as a proof of concept for the versatility of the photoacoustic approach. According to our results, tiny AgNPs (size less than 10 nm) assembled into a 3D-network of super-aggregates (SA-AgNPs) with sizes in the range 100–200 nm and a filling factor in the range of 30–50%. Low-cost, rapid, and easy photoacoustic measurement in the low frequency range (less than 100 Hz) was revealed to be an innovative method to characterize the fundamental structure/property correlation of metal nanoparticle super-aggregates. This morpho-optical approach, which uses the absorption and scattering properties of nanoparticles in the liquid phase, opens new perspectives for advanced biomedical and structural applications.

Plasmonic nanostructures with broken symmetry have been proposed for the control of the circular polarization at the nanoscale, important for applications spanning from chiral sensing to circularly polarized nanosources. We recently demonstrated that the low-cost self-assembling nanosphere lithography, combined with tilted metal deposition, opens new possibilities for the design and fabrication of chiral nanostructures. Starting from polystyrene nanospheres (PNS) covered by asymmetric metallic shell, we measured chirality in absorption at 633 nm [1] . We discovered that the nanohole array (NHA) formed due to the shadow, can exhibit chiral properties in a broad near-infrared range [2] , [3] .

Characterization of both natural and artificial chiral structures involves measurements of differential absorption of circularly polarized light of opposite handedness, i.e. circular dichroism (CD). Here we use a scattering-free, non-destructive photo-deflection technique [1] to detect optical chirality in diffracted orders of a metasurface.

Optical enantioselectivity of chiral molecules could be enhanced by depositing them on suitable nanostructured substrates. Different kind of chiral substrates can be developed, but chiral features are in general difficult to fabricate or costly. Self-assembled approach allows realizing plasmonic metasurfaces with a low cost reliable procedure. In this case asymmetric fabrication parameters can induce chiral optical response of the realised substrate. Self-organized polystyrene spheres deposited on glass substrate, are utilised to produce asymmetric hole array on a metal thin film. In our case the spheres (518 nm in diameter) where reduced by selective reactive ion etching and then covered by gold (and other metals), that is evaporated at a glancing angle. After the removing of the spheres an elliptical-hole array is produced forming a circular-dichroic substrate. The circular dichroic response of light interacting with the substrate can be tuned by choosing proper incidence angle and excitation wavelength, while the flat nature of the metasurface is very useful for easy molecular deposition processes. Two new enantiomers (right-handed and left-handed molecules) have been synthesized in order to present a good circular dichroism in the visible range and to be tested on the realized metasurfaces. Different tests were carried out on the samples, investigating the spectral optical properties of the structures with and without chiral molecules on top of them. The results are very promising due to the possibility of easily tuning and optimizing the optical response.

In this work we present an approach to induce chiral effects in well-known plasmonic nanohole arrays with triangular unit cell. Arrays with circular nanoholes in metals can exhibit interesting light-matter interaction mechanisms such as surface plasmon polaritons and extraordinary optical transmission. Moving from circular to elliptical shape and tilting the ellipse away from the lattice symmetry lines, a symmetry breaking induces a different absorption of the circularly polarized light of opposite handedness, i.e. circular dichroism. We numerically investigate circular dichroism at normal incidence in elliptic nanoholes in Au in the spectral range 400–1000 nm. We focus on its dependence on the elliptic nanohole tilt, and further proceed with the ellipse radii optimization. The optimized circular dichroism reaches 84%, and we report on the near field absorption distribution at the wavelengths of this maximum value.

A detailed structural investigation of the semiconductor-to-metal transition (SMT) in vanadium dioxide thin films deposited on sapphire substrates by pulsed laser deposition was performed by in situ temperature-dependent X-ray diffraction (XRD) measurements. The structural results are correlated with those of infrared radiometry measurements in the SWIR (2.5-5 μm) and LWIR (8-10.6 μm) spectral ranges. The main results indicate a good agreement between XRD and optical analysis, therefore demonstrating that the structural transition from monoclinic to tetragonal phases is the dominating mechanism for controlling the global properties of the SMT transition. The picture that emerges is a SMT transition in which the two phases (monoclinic and tetragonal) coexist during the transition. Finally, the thermal hysteresis, measured for thin films with different thickness, showed a clear dependence of the transition temperature and the width of the hysteresis loop on the film thickness and on the size of the crystallites.

This paper studies the IR properties of a VO2-based multilayer structure with an emittance that increase with the temperature. A good tunability of the emissivity in long-wave infrared spectral region (8–12 µm) has been detected, with a positive emissivity differential of about 0.2. The transition of the long wave emissivity e with the temperature is fully reversible according to a hysteresis cycle, with a transition temperature of 67 °C and a thermal bandwidth of only 8 °C. The multilayer structure also shows two emission peaks both in the heating cycle and in the cooling cycle. This emittance performance is promising for the future development of passive thermal control systems of spacecrafts.

A detailed structural investigation of the semiconductor-to-metal transition (SMT) in vanadium dioxide thin films deposited on sapphire substrates by pulsed laser deposition was performed by in situ temperature-dependent X-ray diffraction (XRD) measurements. The structural results are correlated with those of infrared radiometry measurements in the SWIR (2.5-5 μm) and LWIR (8-10.6 μm) spectral ranges. The main results indicate a good agreement between XRD and optical analysis, therefore demonstrating that the structural transition from monoclinic to tetragonal phases is the dominating mechanism for controlling the global properties of the SMT transition. The picture that emerges is a SMT transition in which the two phases (monoclinic and tetragonal) coexist during the transition. Finally, the thermal hysteresis, measured for thin films with different thickness, showed a clear dependence of the transition temperature and the width of the hysteresis loop on the film thickness and on the size of the crystallites.

Functionalized gold and silver nanoparticles have been prepared and characterized by means of spectroscopic and morphological techniques together focused on electrical measurements on cast deposited films. The Au and Ag nanoparticles have been functionalized with a on purpose prepared conjugated dithiol, 9,9-didodecyl-2,7-bis-thiofluorene (FL), giving rise to organic solvents soluble AuNPs-FL and AgNPs-FL samples, respectively. In the case of AuNPs-FL, well separated nanoparticles, with an average size of about 4 nm, assembled into bidimensionally monolayer network and with regular spatial distributions have been observed by TEM. Synchrotron radiation-XPS data support the observed network formation, showing that all bifunctional ligands end-groups are covalently bonded to metal noble atoms at the nanoparticles surfaces. In order to investigate their interesting conduction properties, electrical measurements evidenced a non-ohmic behavior in the case of the AuNPs-FL thin film, with a conduction mechanism that strongly depends on polarons and bipolarons along the carbon active chain belonging to the fluorene bridge. By increasing the stacked layers of the AuNPs-FL thin film, the conductivity behavior changed following approximately the ohmic law. On the contrary, AgNPs-FL shows higher conductivity, and upon an aging process, a diode behavior was observed that opens perspectives as flexible optoelectronics devices.

We experimentally investigated the infrared properties of a set of steel textiles, prepared using different type of fabrics. Infrared emission of the textiles was characterized in the mid-infrared range, i.e. 8÷14 μm, by observing their temperature evolution under heating regime with a focal plane array (FPA) infrared camera. Standard test method for measuring and compensating emissivity using infrared imaging radiometers was applied to the set of metallic textiles. The obtained experimental results allowed to retrieve the infrared emissivity at different applied temperatures. Although their infrared emission show some differences depending on the specific fabric, all the investigated textiles composed of steel yarns appear to be suitable for thermal shielding applications. Finally, the measured data were interpreted by means of the finite-difference time-domain (FDTD) numerical simulations as well as using Plank's theory of black-body radiation.

Photoacoustic Spectroscopy (PAS) and Photothermal deflection Spectroscopy (PDS) are excellent techniques for studying the optical absorption spectra of opaque and highly light-scattering substances such as nanomaterials. In this paper we review recent advances in the methodology of PAS and its novel applications. In particular we discuss the performance of PAS to detect circular dichroism of intrinsic chiral materials [1] as well as extrinsic pseudo-chiral metasurfaces [2], showing how the selective absorption of circularly polarized light depend on the orientation of the metasurface. We also applied PAS in the VIS/IR range to measure the resonant absorption peaks related to the guided modes of GaAs-based NW on Si [3–5].

Asymmetric nanostructures can mimic a chiral response when circular polarized light interacts with the structures under particular angle of incidence [1]. This phenomenon is called ‘extrinsic chirality’ and usually is present under linear optical investigation with low visibility. Due to the fact that optical second harmonic generation is possible only in samples with some degree of asymmetry, this can be used in order to investigate the extrinsic chirality with a background free technique, thus inducing a high visibility of the artificial circular dichroism [2,3]. Here we present the second harmonic generation (SHG) measurements obtained on samples composed by GaAs nanowires grown on silicon. The wires present resonant leaky modes around 800nm and at 400nm due to the high refractive index contrast ratio between wires and air, even if these wavelengths lie on the absorption band of GaAs [4]. The measurements performed on this sample present good SHG signal due to the second order nonlinear term of GaAs, but did not present any circular dichroism (SHG-CD). By coating the sample with a 20nm thin layer of gold deposited asymmetrically, by evaporating the metal only from one side of the nanowires, the symmetry of the structure is broken, thus induced high SHG-CD. The SHG-CD is measured by shining the sample with circular polarized pump light at the fundamental wavelength of 800nm and by revealing the second harmonic signal at 400nm in s or p polarization, as a function of sample rotation. Four samples were measured with GaAs wires of about 5 micron in length with different diameters ranging from 140nm to 200nm. In this case it is possible to explore different resonance conditions and different SHG-CD is revealed. For each sample, the measured were carried out before and after the asymmetric gold layer deposition, thus allowing direct comparison of the results. References [1] A. Belardini, M. C. Larciprete, M. Centini, E. Fazio, C. Sibilia, D. Chiappe, C. Martella, A. Toma, M. Giordano, and F. Buatier de Mongeot, Phys. Rev. Lett. 107, 257401 (2011). [2] A. Belardini, M. Centini, G. Leahu, D. C. Hooper, R. Li Voti, E. Fazio, J. W. Haus, A. Sarangan, V. K. Valev, C. Sibilia, Sci. Rep. 2016, 6, 31796. [3] G. Leahu, E. Petronijevic, A. Belardini et al., Adv. Optical Mater. 2017, 1601063 (2017). [4] G. Leahu, E. Petronijevic, A. Belardini, M. Centini, R. Li Voti, T. Hakkarainen, E. Koivusalo, M. Guina, C. Sibilia. Sci. Rep. 7, 2833 (2017).

Today, nanophotonics still lacks components for modulation that can be easily implementable in existing siliconon-insulator (SOI) technology. Chalcogenide phase change materials (PCMs) are promising candidates for tuning in the near infrared: at the nanoscale, thin layers can provide enough contrast to control the optical response of a nanostructure. Moreover, all-dielectric metamaterials allow for resonant behavior without having ohmic losses in the telecom range. Here, a novel hybridization of a SOI-based metamaterial with PCM GeTe is experimentally investigated. A metamaterial based on Si nanorods, covered by a thin layer of GeTe, is designed and fabricated. Switching GeTe from amorphous to crystalline leads to a rather high resonance-governed reflection contrast at 1.55 mu m. Additional confocal Raman imaging is done to differentiate the crystallized zones of the metamaterials' unit cell. The findings are in good agreement with numerical analysis and show good perspectives of all-dielectric tunable near-infrared nanophotonics. (C) 2019 Optical Society of America

Arrays of nanoholes in metal are important plasmonic devices, proposed for applications spanning from biosensing to communications. In this work, we show that in such arrays the symmetry can be broken by means of the elliptical shape of the nanoholes, combined with the in-plane tilt of the ellipse axes away from the array symmetry lines. The array then differently interacts with circular polarizations of opposite handedness at normal incidence, i.e., it becomes intrinsically chiral. The measure of this difference is called circular dichroism (CD). The nanosphere lithography combined with tilted silver evaporation was employed as a low-cost fabrication technique. In this paper, we demonstrate intrinsic chirality and CD by measuring the extinction in the near-infrared range. We further employ numerical analysis to visualize the circular polarization coupling with the nanostructure. We find a good agreement between simulations and the experiment, meaning that the optimization can be used to further increase CD.

We present a comparative study of the emission properties of a vanadium dioxide thin film (approximately 200 nm) deposited on a silicon wafer in different sub-spectral-ranges of the mid-infrared, with particular attention to the windows of transparency of the atmosphere to the infrared radiation (i.e., 3–5 μm, 8–12 μm). The infrared emission properties of the structure are closely related to the well-known phase transition of the first order, from semiconductor to metal, of the vanadium dioxide around the temperature of 68 °C. The characterization of the emissivity in the sub-regions of the mid-infrared was carried out both in the front configuration, that is on the VO2 film side, and in the rear configuration on the silicon wafer side, and showed a strong difference in the hysteresis thermal bandwidth, in particular between the short wave region and the long wave region. The bandwidth is equal to 12 °C for the front and 15 °C for the rear. The emissivity behaviors as a function of temperature during the semiconductor-metal transition in the mid-infrared subregions were analyzed and explained using the theories of the effective medium of Maxwell Garnett and Bruggeman, highlighting the greater functionality of one theory with respect to the other depending on the spectral detection band.

Photoacoustic spectroscopy investigation was carried out on ZnO nanoparticles grown at 80 °C on porous surface of diatomite (DE) by sol–gel technique, using zinc acetate dihydrate as ceramic precursor and triethanolamine to mediate the surface growth of the nanoparticles. Absorption and scattering characteristics of hybrid ZnO/DE powder in the UV–Vis range were inferred by photoacoustic spectroscopy, and results were analyzed based on Helander’s theory. In particular, we discussed in detail the procedure to calculate the absorption and scattering spectra of the hybrid powder showing how from the scattering coefficient in the 300–450 nm range it is possible to obtain information on the size distribution of the ZnO nanospheres. By applying photoacoustic spectroscopy for different modulation frequencies, we showed that is also possible to perform a size distribution depth profile of the ZnO aggregates, opening the way to interesting developments in this research field. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.

This paper shows a detailed analysis of the semiconductor-to-metal transition (SMT) in a vanadium dioxide (VO2) film deposited on silicon wafer. The vanadium dioxide phase transition is studied in the wide mid-infrared range 2-12 μm, by analyzing the transmittance and the reflectance measurements, and the calculated emissivity from the sample. The temperature behavior of the emissivity during the SMT put into evidence the phenomenon of the anomalous absorption in vanadium dioxide which has been explained by applying the Maxwell Garnett effective medium approximation theory. A strong hysteresis phenomenon of about 8°C has also been found for transmittance, reflectance and emissivity. Experimental results show how the use of these techniques represent a good tool for a quantitative measurement of the infrared properties in the MIR range.

Semiconductor nanowires made of high refractive index materials can couple the incoming light to specific waveguide modes that offer resonant absorption enhancement under the bandgap wavelength, essential for light harvesting, lasing and detection applications. Moreover, the non-trivial ellipticity of such modes can offer near field interactions with chiral molecules, governed by near chiral field. These modes are therefore very important to detect. Here, we present the photo-acoustic spectroscopy as a low-cost, reliable, sensitive and scattering-free tool to measure the spectral position and absorption efficiency of these modes. The investigated samples are hexagonal nanowires with GaAs core; the fabrication by means of lithography-free molecular beam epitaxy provides controllable and uniform dimensions that allow for the excitation of the fundamental resonant mode around 800 nm. We show that the modulation frequency increase leads to the discrimination of the resonant mode absorption from the overall absorption of the substrate. As the experimental data are in great agreement with numerical simulations, the design can be optimized and followed by photo-acoustic characterization for a specific application. acceptedVersion

We report on the extrinsic chirality behavior of GaAs-based NWs asymmetrically hybridized with Au. The samples are fabricated by a recently developed, lithography-free self-organized GaAs growth, with the addition of AlGaAs shell and GaAs supershell. The angled Au flux is then used to cover three-out-of-six sidewalls with a thin layer of Au. Oblique incidence and proper sample orientation can lead to circular dichroism. We characterize this chiral behavior at $$ 532\,{\text{nm}} $$ and $$ 980\,{\text{nm}} $$ by means of photo-acoustic spectroscopy, which directly measures the difference in absorption for the circularly polarized light of the opposite headedness. For the first time to our knowledge, circular dichroism is observed in both the amplitude and the phase of the photo-acoustic signal. We strongly believe that such samples can be used for chiral applications, spanning from circularly polarized light emission, to the enantioselectivity applications.

Photothermal and photoacoustic techniques are utilized to explore the thermal properties of metal based metasurfaces. We experimentally evidence the role of the symmetry in the heat transport and its relation with the optical circular dichroism.

Here we present measurements on a metasurface composed by tilted gold nanowires. The metasurface can induce an optical chiral response of the whole sample when the light impinges on the sample out of the normal incidence angle. In order to investigate the symmetry breaking induced by the geometry, we measured the second harmonic generation (SHG) signal generated by circular polarized pulsed light. This technique has demonstrated to be a powerful method in order to investigate the chiral morphology of nanostructures.

Compact samples of nano-helices built by means of a focused ion beam technology with large bandwidth and high dichroism for circular polarization are promising for the construction of built-in-chip sensors, where the ideal transducer must be sufficiently confined without compromising its filtering ability. Direct all-optical measurements revealed the sample’s dichroic character with insufficient details because of scattering and diffraction interference. On the other hand, photoacoustic measurements resulted to be a possible alternative investigation, since they directly deal with absorbed power and allow to get clear evidences of the differential selection for the two opposite polarization states. Multi-level numerical simulations confirmed the experimental results, proving once again the reliability of photoacoustic technique and the versatility of this class of dichroic artificial materials.

Zinc oxide (ZnO) nanoparticles were synthesized on diatomite (DE) surface by a low temperature sol gel technique, starting from zinc acetate dihydrate (Zn(CH3COO)2 • 2H2O) solution in water/ethyl alcohol, in presence of triethanolamine (TEA) with functions of Zn2+ chelating agent, catalyst and mediator of nanoparticle growth on DE surface. Microstructural features were investigated by field emission scanning electron microscopy and x-ray diffraction. ZnO crystalline nanoparticles, well distributed both on the surface and into the porous architecture of diatomite, were obtained just after the synthesis carried out at 80 °C without the need of calcination treatments. The optical properties of ZnO/DE hybrid powders were measured for the first time by means of photoacoustic spectroscopy (PAS). A new method to retrieve both the optical absorption and scattering coefficients from PAS is here discussed for powder aggregates. The fingerprint of the zinc oxide nanoparticles has been highlighted in the Mie scattering resonance in the UV-Vis range, and in the enhancement of the optical absorption with respect to diatomite. © 2017 IOP Publishing Ltd.

We demonstrate the control of enhanced chiral field distribution at the surface of hybrid metallo-dielectric nanostructures composed of self-assembled vertical hexagonal GaAs-based nanowires having three of the six sidewalls covered with Au. We show that weakly-guided modes of vertical GaAs nanowires can generate regions of high optical chirality that are further enhanced by the break of the symmetry introduced by the gold layer. Changing the angle of incidence of a linearly polarized plane wave it is possible to tailor and optimize the maps of the optical chirality in proximity of the gold plated walls. The low cost feasibility of the sample combined to the simple control by using linearly polarized light and the easy positioning of chiral molecules by functionalization of the gold plates make our proposed scheme very promising for enhanced enantioselective spectroscopy applications. publishedVersion

For the development of new generation portable electronic devices, the realization of thin and flexible electrodes have a crucial role. Conductive organic systems can address this issue in different ways. Indeed, conductance in organic molecules were studied in different papers starting from seminal papers in last 70’s [1] up to recent ones [2]. Among organic species, conduction and electronic characteristics of Fluorene derivatives were studied in different configurations [3,4]. Unfortunately, the conductance of organic materials is limited by charge transport mechanism [5]. Hybrid system with organic conductive compounds covalently linked with metal centres can lead to enhanced conductivity [6]. Here we synthesized gold and silver nanoparticles (AuNPs and AgNPs) stabilized with a fluorene thiolate derivative, namely 9,9-Didodecyl-2,7-bis(acetylthio)fluorene (FL). In the synthesis process the metal nanoparticles (MNPs) size results to be around 5 nm in diameter [7]. When deposited on a planar substrate, the hybrid compound form a regular network of MNPs separated each other by fluorene spacers covalently linked by thiol groups [8]. We deposited the network on substrate with two interdigitated electrodes in order to measure conductive properties (I-V characteristics). In I-V measurements it results to be that AgNPs based network is 200 times more conductive than AuNPs one. Selective oxidation of AgNPs network close to positive electrodes gives rise to a Schottky diode behavior in the I-V characteristic that could find potential applications in nano-electronics devices. The fluorescence and extinction spectra of FL-AgNPs and FL-AuNPs where characterised. References [1] C. K. Chiang, C. R. Fincher, Jr., Y. W. Park, A. J. Heeger, H. Shirakawa, E. J. Louis, S. C. Gau, and Alan G. MacDiarmid, Phys. Rev. Lett. 39, 1098 (1977). [2] Hylke B. Akkerman, Paul W. M. Blom, Dago M. de Leeuw and Bert de Boer, Nature 441, 69 (2006). [3] Rajendra Prasad Kalakodimi, Aletha M. Nowak, and Richard L. McCreery, Chem. Mater. 17, 4939 (2005). [4] J. Wu, K. Mobley, and R. L. Mc Creery, J. Chem. Phys. 126, 024704 (2007). [5] Cristina Hermosa, Jose Vicente Alvarez, Mohammad-Reza Azani, Carlos J. Gomez-Garcia, Michelle Fritz, Jose M. Soler, Julio Gomez-Herrero, Cristina Gomez-Navarro and Felix Zamora, Nature Commun. 4, 1709 (2013). DOI: 10.1038/ncomms2696. [6] Nunzio Tuccitto, Violetta Ferri, Marco Cavazzini, Silvio Quici, Genady Zhavnerko, Antonino Licciardello and Maria Anita Rampi, Nature Mater. 8, 41 (2009). [7] Quintiliani, M., Bassetti, M., Pasquini, C., et al. J. Mater. Chem. C, 2014, (2), pp. 2517-2527. [8] R. Matassa, G. Familiari, E. Battaglione, Concita Sibilia et al., Nanoscale, 2016,8, 18161-18169.

III–V semiconductors nanowires (NW) have recently attracted a significant interest for their potential application in the development of high efficiency, highly-integrated photonic devices and in particular for the possibility to integrate direct bandgap materials with silicon-based devices. Here we report the absorbance properties of GaAs-AlGaAs-GaAs core-shell-supershell NWs using photo-acoustic spectroscopy (PAS) measurements in the spectral range from 300 nm to 1100 nm wavelengths. The NWs were fabricated by self-catalyzed growth on Si substrates and their dimensions (length ~5 μm, diameter ~140–150 nm) allow for the coupling of the incident light to the guided modes in near-infrared (IR) part of the spectrum. This coupling results in resonant absorption peaks in the visible and near IR clearly evidenced by PAS. The analysis reveal broadening of the resonant absorption peaks arising from the NW size distribution and the interaction with other NWs. The results show that the PAS technique, directly providing scattering independent absorption spectra, is a very useful tool for the characterization and investigation of vertical NWs as well as for the design of NW ensembles for photonic applications, such as Si-integrated light sources, solar cells, and wavelength dependent photodetectors.

Second-order nonlinear optical materials are used to generate new frequencies by exploiting second-harmonic generation (SHG), a phenomenon where a nonlinear material generates light at double the optical frequency of the input beam. Maximum SHG is achieved when the pump and the generated waves are in phase, for example through birefringence in uniaxial crystals. However, applying these materials usually requires a complicated cutting procedure to yield a crystal with a particular orientation. Here we demonstrate the first example of phase matching under the normal incidence of SHG in a biaxial monoclinic single crystal of zinc tungstate. The crystal was grown by the micro-pulling-down method with the (102) plane perpendicular to the growth direction. Additionally, at the same time white light was generated as a result of stimulated Raman scattering and multiphoton luminescence induced by higher-order effects such as three-photon luminescence enhanced by cascaded third-harmonic generation. The annealed crystal offers SHG intensities approximately four times larger than the as grown one; optimized growth and annealing conditions may lead to much higher SHG intensities.

In this work we report on the resonant absorption properties of GaAs-based nanowires, and on the chiral response when such nanowires are asymmetrically covered by gold. We use photo-acoustic spectroscopy which is a scattering-free, stable and highly sensitive technique that directly measures the absorption of the nanowire ensembles. Highly uniform samples were fabricated by lithography-free process of selfcatalyzed growth on Si substrates. We report on the experimental resonant absorption in the range (300÷1100) nm, which is in great agreement with simulations. We then measure the circular dichroism at 532nm, and discuss on the formation of near chiral fields for enhanced enantioselectivity applications.

We apply photo-acoustic (PA) technique to examine plasmonic properties of 2D periodic arrays of nanoholes etched in gold/chromium layer upon a glass substrate. The pitch of these arrays lies in the near IR, and this, under appropriate wave vector matching conditions in the visible region, allows for the excitation of surface plasmon polaritons (SPP) guided along a dielectric - metal surface. SPP offered new approaches in light guiding and local field intensity enhancement, but their detection is often difficult due to the problematic discrimination of their contribution from the overall scattering. Here PA measures the energy absorbed due to the non-radiative decay of SPPs. We report on the absorption enhancement by presenting the spatial mapping of absorption under the incidence angles and wavelength that correspond to the efficient excitation of SPPs. Moreover, a comparison with optical transmission measurements is carried out, underlining the applicability and sensitivity of PA technique.

Here we investigated the SH generation at the wavelength of 400 nm (pump laser at 800 nm, 120 fs pulses) of a “metasurface” composed by an alternation of GaAs nano-grooves and Au nanowires capping portions of flat GaAs. The nano-grooves depth and the Au nanowires thickness gradually vary across the sample. The samples are obtained by ion bombardment at glancing angle on a 150 nm Au mask evaporated on a GaAs plane wafer. The irradiation process erodes anisotropically the surface, creating Au nanowires and, at high ion dose, grooves in the underlying GaAs substrate (pattern transfer). The SHG measurements are performed for different pump linear polarization angle at different positions on the “metasurface” in order to explore the regions with optimal conditions for SHG efficiency. The pump polarization angle is scanned by rotating a half-wave retarder plate. While the output SH signal in reflection is analyzed by setting the polarizer in ‘s’ or ‘p’ configuration in front of the detector. The best polarization condition for SHG is obtained in the configuration where the pump and second harmonic fields are both ‘p’ polarized, and the experiments show a SH polarization dependence of the same symmetry of bulk GaAs. Thus, the presence of gold contributes only as field localization effect, but do not contributes directly as SH generator.

We show that photo-acoustic spectroscopy allows determination of the nanowire absorbance properties including resonant peak positions and peak broadening due to collective ensemble properties. Furthermore, we demonstrate chiral optical response in asymmetrically Aucoated nanowires.

In this work, we propose the hybridization of all-dielectric metasurfaces based on Si nanoresonators with thin layers of phase change materials (PCM). The concept of all-dielectric metasurfaces is important when one needs to avoid inherent ohmic losses in metal-based nanostructures, e.g. for high Qfactor and figure of merit (FOM). Si nanoresonators can possess electric and magnetic resonances while having low losses in the desired range. On the other hand, chalcogenide PCM have at least two phases with different optical properties, stable at room temperature; switching between these two phases can be reversibly done by a visible laser. If a thin PCM layer is put in contact with Si nanoresonator, its phase-change will change the dielectric environment of the nanoresonator, thus changing the overall resonant response. We numerically investigate the all-optical switching in telecom range of the metasurface based on nanorods and square-like nanorings, namely “bright” and “dark” nanoresonators, respectively. We then experimentally report on the PCM switching metasurface based on nanorods, i.e. “bright” resonators. We strongly believe that this research could lead to new perspectives in all-optical, all-dielectric nanophotonics.

Carbon nanotubes (CNTs) are multifunctional materials commonly used in a large number of applications in electronics, sensors, nanocomposites, thermal management, actuators, energy storage and conversion, and drug delivery. Despite recent important advances in the development of CNT purity assessment tools and atomic resolution imaging of individual nanotubes by scanning tunnelling microscopy and high-resolution transmission electron microscopy, the macroscale assessment of the overall surface qualities of commercial CNT materials remains a great challenge. The lack of quantitative measurement technology to characterize and compare the surface qualities of bulk manufactured and engineered CNT materials has negative impacts on the reliable and consistent nanomanufacturing of CNT products. In this paper it is shown how photoacoustic spectroscopy and photothermal radiometry represent useful non-destructive tools to study the optothermal properties of carbon nanotube thin films.

In this work, the photoacoustic characterization in the UV/Vis range of randomly oriented silver nanowire films deposited onto either a quartz or polymeric substrate is presented. This study was performed for a set of films differing in both metallic nanowire dimensions, as well as metal content. Samples were prepared starting from suspensions of Ag nanowires in isopropanol (IPA) $$(25~\mathrm{mg}{\cdot }\mathrm{ml}^{-1})$$ , differing in both the length and diameter of the nanowires. The obtained films were characterized by scanning electron micrography (SEM) images; thus, the metal filling factor was retrieved with MATLAB software based on a visual method. Following the morphological characterization, both spectrophotometry and the photoacoustic spectroscopy (PAS) technique were employed to investigate in detail the absorbance spectra of silver nanowire films, in order to evidence their peculiar properties in the UV/Vis spectral range. Specifically, this photothermal technique is particularly useful to investigate a film that may exhibit relevant scattering phenomena, as for metallic nanowire films. The obtained experimental results show that the choice of the metal filling factor may affect the absorbance spectra of the resulting mesh.

Nowadays, nanophotonics aims towards low-cost chip-scale devices that can tailor electromagnetic properties, one of which is the control of circular polarization at the nanoscale. Here, we demonstrate the chiral properties of metasurfaces produced by means of nanosphere lithography combined with tilted metal deposition. We apply the photo-acoustic technique to characterize the circular dichroism (CD) at 633 nm of polystyrene nanospheres covered by three different metals: Au- and Cr-covered samples show extrinsic chiral behavior, while the Ag-covered sample shows CD at normal incidence, characteristic of intrinsic chirality. As the experimental data are in good agreement with numerical predictions, we believe that such design can be optimized to get efficient circularly polarized detection at the nanoscale.

Extrinsic or pseudo-chiral (meta)surfaces have an achiral structure, yet they can give rise to circular dichroism when the experiment itself becomes chiral. Although these surfaces are known to yield differences in reflected and transmitted circularly polarized light, the exact mechanism of the interaction has never been directly demonstrated. Here we present a comprehensive linear and nonlinear optical investigation of a metasurface composed of tilted gold nanowires. In the linear regime, we directly demonstrate the selective absorption of circularly polarised light depending on the orientation of the metasurface. In the nonlinear regime, we demonstrate for the first time how second harmonic generation circular dichroism in such extrinsic/pseudo-chiral materials can be understood in terms of effective nonlinear susceptibility tensor elements that switch sign depending on the orientation of the metasurface. By providing fundamental understanding of the chiroptical interactions in achiral metasurfaces, our work opens up new perspectives for the optimisation of their properties.

We present experimental results of linear and nonlinear optical measurements from a plasmonic metasurface composed by self-assembled tilted gold nanowires. We investigated the extrinsic chiral response due to the particular symmetry breaking induced by the nanowires geometry by using second harmonic generation, photoacoustic absorption and optical reflectance measurements.