Search

Eman Abd,1 Shereen A Yousef,1 Michael N Pastore,2 Krishna Telaprolu,1 Yousuf H Mohammed,1 Sarika Namjoshi,1 Jeffrey E Grice,1 Michael S Roberts1,2 1Translational Research Institute, School of Medicine, University of Queensland, Brisbane, 2School of Pharmacy and Medical Sciences, University of South Australia, Adelaide, Australia Abstract: The assessment of percutaneous permeation of molecules is a key step in the evaluation of dermal or transdermal delivery systems. If the drugs are intended for delivery to humans, the most appropriate setting in which to do the assessment is the in vivo human. However, this may not be possible for ethical, practical, or economic reasons, particularly in the early phases of development. It is thus necessary to find alternative methods using accessible and reproducible surrogates for in vivo human skin. A range of models has been developed, including ex vivo human skin, usually obtained from cadavers or plastic surgery patients, ex vivo animal skin, and artificial or reconstructed skin models. Increasingly, largely driven by regulatory authorities and industry, there is a focus on developing standardized techniques and protocols. With this comes the need to demonstrate that the surrogate models produce results that correlate with those from in vivo human studies and that they can be used to show bioequivalence of different topical products. This review discusses the alternative skin models that have been developed as surrogates for normal and diseased skin and examines the concepts of using model systems for in vitro–in vivo correlation and the demonstration of bioequivalence. Keywords: percutaneous permeation, dermal delivery, transdermal, bioequivalence, ex vivo skin models, reconstructed skin

Purpose: The objective of this study was to investigate whether different dispensing processes can alter the physicochemical and structural (Q3) attributes of a topical cream product, and potentially alter its performance., Methods: Acyclovir cream, 5% (Zovirax®) is sold in the UK and other countries in a tube and a pump packaging configurations. The structural attributes of the cream dispensed from each packaging configuration were analyzed by optical microscopy, confocal Raman microscopy and cryo-scanning electron microscopy. Rheological behavior of the products was also evaluated. Product performance (rate and extent of skin delivery) was assessed by in vitro permeation tests (IVPT) using heat-separated human epidermis mounted in static vertical (Franz-type) diffusion cells., Results: Differences in Q3 attributes and IVPT profiles were observed with creams dispensed from the two packaging configurations, even though the product inside each packaging appeared to be the same in Q3 attributes. Visible globules were recognized in the sample dispensed from the pump, identified as dimethicone globules by confocal Raman microscopy. Differences in rheological behaviour could be attributed to these globules as products not dispensed through the pump, demonstrated a similar rheological behaviour. Further, IVPT confirmed a reduced rate and extent to delivery across human epidermis from the product dispensed through a pump., Conclusions: Different methods of dispensing topical semisolid products can result in metamorphosis and Q3 changes that may have the potential to alter the bioavailability of an active ingredient. These findings have potential implications for product developers and regulators, related to the manufacturing and comparative testing of reference standard and prospective generic products dispensed from different packaging configurations., (© 2024. The Author(s).)

Purpose: To develop a toolkit of test methods for characterizing potentially critical quality attributes (CQAs) of topical semisolid products and to evaluate how CQAs influence the rate and extent of active ingredient bioavailability (BA) by monitoring cutaneous pharmacokinetics (PK) using an In Vitro Permeation Test (IVPT)., Methods: Product attributes representing the physicochemical and structural (Q3) arrangement of matter, such as attributes of particles and globules, were assessed for a set of test acyclovir creams (Aciclostad® and Acyclovir 1A Pharma) and compared to a set of reference acyclovir creams (Zovirax® US, Zovirax® UK and Zovirax® Australia). IVPT studies were performed with all these creams using heat-separated human epidermis, evaluated with both, static Franz-type diffusion cells and a flow through diffusion cell system., Results: A toolkit developed to characterize quality and performance attributes of these acyclovir topical cream products identified certain differences in the Q3 attributes and the cutaneous PK of acyclovir between the test and reference sets of products. The cutaneous BA of acyclovir from the set of reference creams was substantially higher than from the set of test creams., Conclusions: This research elucidates how differences in the composition or manufacturing of product formulations can alter Q3 attributes that modulate myriad aspects of topical product performance. The results demonstrate the importance of understanding the Q3 attributes of topical semisolid drug products, and of developing appropriate product characterization tests. The toolkit developed here can be utilized to guide topical product development, and to mitigate the risk of differences in product performance, thereby supporting a demonstration of bioequivalence (BE) for prospective topical generic products and reducing the reliance on comparative clinical endpoint BE studies., (© 2024. The Author(s).)

Objective: This study aimed to develop a holobiont tablet with rapid dispersibility to provide regulation of the microbiota, virucidal activity, and skin barrier protection., Methods: A 2 3 factorial experiment was planned to define the best formulation for the development of the base tablet, using average weight, hardness, dimensions, swelling rate, and disintegration time as parameters to be analyzed. To produce holobiont tablets, the chosen base formulation was fabricated by direct compression of prebiotics, postbiotics, and excipients. The tablets also incorporated solid lipid nanoparticles containing postbiotics that were obtained by high-pressure homogenization and freeze-drying. The in vitro virucidal activity against alpha-coronavirus particles (CCoV-VR809) was determined in VERO cell culture. In vitro analysis, using monolayer cells and human equivalent skin, was performed by rRTq-PCR to determine the expression of interleukins 1, 6, 8, and 17, aquaporin-3, involucrin, filaggrin, FoxO3, and SIRT-1. Antioxidant activity and collagen-1 synthesis were also performed in fibroblast cells. Metagenomic analysis of the skin microbiome was determined in vivo before and after application of the holobiont tablet, during one week of continuous use, and compared to the use of alcohol gel. Samples were analyzed by sequencing the V3-V4 region of the 16S rRNA gene., Results: A handrub tablet with rapid dispersibility was developed for topical use and rinse off. After being defined as safe, the virucidal activity was found to be equal to or greater than that of 70% alcohol, with a reduction in interleukins and maintenance or improvement of skin barrier gene markers, in addition to the reestablishment of the skin microbiota after use., Conclusions: The holobiont tablets were able to improve the genetic markers related to the skin barrier and also its microbiota, thereby being more favorable for use as a hand sanitizer than 70% alcohol.

Chemical excipients used in topical formulations may be toxic to living skin cells. Here, we compared the in vitro toxicity of some common solubilizing excipients against human melanoma cells, human keratinocytes (HaCaT) and primary skin fibroblasts (FB) as examples of cancerous, immortalized and primary human skin cells, often used as experimental models representative of in vivo conditions. Two distinct endpoint assays (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and crystal violet (CV)) were used. The mechanism of cell death after excipient exposure was assessed through Reactive Oxygen Species (ROS) production, cell membrane integrity and cell cycle progression. Results showed that the surfactants, Labrasol®, Labrafil® and Transcutol®, were less toxic than Triton X-100 (a model irritant) in all cell types whereas the oil, Labrafac®, was non-toxic. The human melanoma WM164 cell line showed the greatest sensitivity toward cytotoxicity after chemical exposure, while the other cell lines were more resistant. The relative excipient cytotoxicity responses observed in the MTT and CV assays were comparable and similar trends were seen in their estimated 50 % inhibitory concentration (IC 50 ) values. DNA fragmentation by flow cytometry after exposing the cells to IC 50 concentrations of the excipients showed negligible apoptotic populations. ROS production was increased in all cell types after toxic exposure; however, ROS elevation did not lead to apoptosis. The toxicity profiles of each excipient are not only relevant to their use in formulating safe topical products but also in the potential synergistic efficacy in the topical treatment of melanoma., Competing Interests: The authors declare that they have no conflict of interest., (Copyright © 2023 Forouz et al.)

The presence of esterase enzymes in human skin and their role in drug metabolism has been reported, but their distribution in the various skin layers and the relative contributions of those layers to metabolism is poorly defined. To gain further insight into esterase distribution, we performed in vitro skin permeation of a commercial 28.3% methyl salicylate (MeSA) cream (Metsal™) in Franz diffusion cells, using a range of human skin membranes, all from the same donor. The membranes were viable epidermis separated by a dispase II enzymatic method, heat separated epidermis, dermatomed skin, and dermis separated by a dispase II enzymatic method. Methyl salicylate and its metabolite, salicylic acid (SA), were measured by high-performance liquid chromatography. Alpha naphthyl acetate and Hematoxylin and Eosin staining provided qualitative estimations of esterase distribution in these membranes. The permeation of methyl salicylate after 24 h was similar across all membranes. Salicylic acid formation and permeation were found to be similar in dermatomed skin and dermis, suggesting dermal esterase activity. These results were supported by the staining studies, which showed strong esterase activity in the dermal-epidermal junction region of the dermis. In contrast with high staining of esterase activity in the stratum corneum and viable epidermis, minimal stained and functional esterase activity was found in heat-separated and dispase II-prepared epidermal membranes. The results are consistent with dispase II digesting hemidesmosomes, penetrating the epidermis, and affecting epidermal esterases but not those in the dermis. Accordingly, whilst the resulting dispase II-generated dermal membranes may be used for in vitro permeation tests (IVPT) involving esterase-based metabolic studies, the dispase II-generated epidermal membranes are not suitable for this purpose.

Mosquito-borne diseases affect millions of people worldwide each year, and the use of a topically applied insect repellent is an economically viable preventative health practice. The general objective of this work was to encapsulate citronella oil (CO) in a nanostructured lipid carrier (NLC) to formulate a topical repellent with a long duration of efficacy on the skin and a good safety profile based on minimizing skin penetration. In the studied CO, the main chemical constituents of geraniol, citronellal, and citronellol were identified and subsequently used as markers for the in vitro skin permeation testing (IVPT). An optimal NLC encapsulating CO formulation was developed and had an average particle size of 350 nm. The NLC was then formulated in combination with CO at ratios of 2:1, 1:1, and 1:2 CO:NLC-CO as oil-in-water (O/W) emulsions and compared to CO in the same O/W emulsion base (all at 10% CO in the final O/W topical formulation). The markers geraniol, citronellol, and citronellal were detected in all samples tested F1 (10% CO in O/W emulsion) and F3 (10% CO/NLC-CO 1:1 in O/W emulsion). Even the percentages of F3 markers were higher than F1. The recovery of the percentage balance (based on the total remaining on the skin surface, on the skin, and penetrated through the skin to the receptor) of geraniol, citronellol, and citronellal markers for F1 and F3 was 7.70% and 11.96%; 25.51% and 31.89%; and 5.09% and 4.40%, respectively. The nanoparticle lipid solid forms a repellent reservoir on the skin surface, releasing the active ingredients slowly through volatilization, extending the repellent action, and reducing permeation through the skin. It is possible to assume that the remaining 92.30% and 88.03%; 74.49% and 68.11%; and 94.10% and 95.60% of geraniol, citronellol, and citronellal markers of F1 and F3, respectively, were lost to evaporation. In the in vivo efficacy test carried out with the Aedes aegypti mosquito, F3 was the optimal formulation, providing the greatest repellent action compared to free oil in O/W emulsion. Thermal analysis showed that the NLC-CO raised the boiling point of the encapsulated CO compared to the free oil, suggesting that the controlled release of the CO was a possible mechanism for its prolonged effect. We concluded that the nanocarriers developed with CO were stable and provided improved mosquito-repellent efficacy with minimal skin penetration of the CO actives over 24 h. Indeed, regardless of whether the CO was applied as free oil, a 1:1 mixture of CO (pure/free oil) or NLC-CO applied in an O/W emulsion can be considered safe for topical application due to minimal skin penetration.

Mosquito-borne diseases such as dengue, malaria, yellow fever, chikungunya and Zika virus affect millions of people worldwide each year. Vector control and personal protection are very important to minimize the spread of diseases, and the use of repellent is an economic practice to prevent them. The application of repellent, which acts on the skin to form a vapor layer with a repellent odor to mosquitos, is recommended as an economic prevention and practice. The natural botanical product Citronella is an effective mosquito repellent due to the high concentrations of active chemical constituents present, notably terpenic alcohols. However, citronella tends to evaporate quickly from the skin surface, resulting in a rapid loss of activity. Strategies to increase repellency time, while at the same time minimizing toxicity, are major focuses of research and development in natural repellent products. Here we highlight the role of extended-release systems (ERS) of citronella oil in this approach., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Pharmacokinetic (PK) models are widely used to describe drug permeation across the epidermal membrane barrier, the stratum corneum (SC). Here, we extend our previously reported diffusion and compartment-in-series models to describe plasma concentrations, urinary excretion-time profiles and exposure estimates after topically applied finite doses of solvent deposited solids. In vivo models were derived by convolution of a skin absorption input function for finite dosing with that for in vivo disposition PK. In vitro skin permeation test (IVPT) and in vivo urinary excretion data for cortisone, desoxycorticosterone, and testosterone were extracted from literature for model validation and establishment of in vitro - in vivo relationships (IVIVR). Both SC diffusion and SC 3-compartment-in-series PK models adequately described experimental in vitro and in vivo permeation data, with similar model parameter estimates for SC diffusion time and bioavailability. A satisfactory IVIVR was generated for cortisone, whereas testosterone and desoxycorticosterone showed higher bioavailability in vitro compared to in vivo. In recognising that future prospective studies need to both have an adequate sampling schedule and be harmonized for robust IVIVRs, we developed expressions for predicting extent of absorption and time for peak absorption for both in vitro and in vivo studies. Other study parameters, such as application site, applied dose, and application techniques, can also affect drug permeability through skin during dosage form metamorphosis after finite dose application, and a lack of correlation may result if these are poorly matched., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Eleftheria Tsakalozou reports a relationship with US Food and Drug Administration that includes: employment. Zhanglin Ni reports a relationship with US Food and Drug Administration that includes: employment. Priyanka Ghosh reports a relationship with US Food and Drug Administration that includes: employment., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Physiologically based pharmacokinetic (PBPK) modeling has increasingly been employed in dermal drug development and regulatory assessment, providing a framework to integrate relevant information including drug and drug product attributes, skin physiology parameters, and population variability. The current study aimed to develop a stepwise modeling workflow with knowledge gained from modeling in vitro skin permeation testing (IVPT) to describe in vivo exposure of metronidazole locally in the stratum corneum following topical application of complex semisolid drug products. The initial PBPK model of metronidazole in vitro skin permeation was developed using infinite and finite dose aqueous metronidazole solution. Parameters such as stratum corneum lipid-water partition coefficient (K sclip/water ) and stratum corneum lipid diffusion coefficient ( D sclip ) of metronidazole were optimized using IVPT data from simple aqueous solutions (infinite) and MetroGel (10 mg/cm 2 dose application), respectively. The optimized model, when parameterized with physical and structural characteristics of the drug products, was able to accurately predict the mean cumulative amount permeated (cm 2 /h) and flux (μg/cm 2 /h) profiles of metronidazole following application of different doses of MetroGel and MetroCream. Thus, the model was able to capture the impact of differences in drug product microstructure and metamorphosis of the dosage form on in vitro metronidazole permeation. The PBPK model informed by IVPT study data was able to predict the metronidazole amount in the stratum corneum as reported in clinical studies. In summary, the proposed model provides an enhanced understanding of the potential impact of drug product attributes in influencing in vitro skin permeation of metronidazole. Key kinetic parameters derived from modeling the metronidazole IVPT data improved the predictions of the developed PBPK model of in vivo local metronidazole concentrations in the stratum corneum. Overall, this work improves our confidence in the proposed workflow that accounts for drug product attributes and utilizes IVPT data toward improving predictions from advanced modeling and simulation tools.

The dataset represented in this article is referred to by the review article entitled "Topical drug delivery: history, percutaneous absorption, and product development" (MS Roberts et al. , 2021) [1]. The dataset contains maximal flux ( J max ), and permeability coefficient ( k p ) values collated from In Vitro human skin Permeation Test (IVPT) reports published to date for various drugs, xenobiotics, and other solutes applied to human epidermis from aqueous solutions. Also included are each solute's physicochemical properties and the experimental conditions, such as temperature, skin thickness, and skin integrity, under which the data was generated. This database is limited to diluted or saturated aqueous solutions of solutes applied on human epidermal membranes or isolated stratum corneum in large volumes so that there was minimal change in the donor phase concentration. Included in this paper are univariate Quantitative Structure-epidermal Permeability Relationships (QSPR) in which the solute epidermal permeation parameters ( k p , and J max ) are related to potential individual solute physicochemical properties, such as molecular weight ( MW ), log octanol-water partition coefficient ( log P ), melting point ( MP ), hydrogen bonding (acceptor - H a , donor - H d ), by scatter plots. This data was used in the associated review article to externally validate existing QSPR regression equations used to forecast the k p and J max for new therapeutic agents and chemicals. The data may also be useful in developing new QSPRs that may aid in: (1) drug choice and (2) product design for both topical and transdermal delivery, as well as (3) characterizing the potential skin exposure of hazardous substances., Competing Interests: Hanumanth Srikanth Cheruvu was supported by an Australian Government Research Training Program (International) scholarship awarded by the University of Queensland. Michael S. Roberts was the recipient of a National Health and Medical Research Council of Australia Fellowship (#1107356). The authors declare that they have no known competing financial interests or personal relationships, which have or could be perceived to have influenced the work reported in this article., (© 2022 The Authors. Published by Elsevier Inc.)

Purpose: The quality testing and approval procedure for most pharmaceutical products is a streamlined process with standardized procedures for the determination of critical quality attributes. However, the evaluation of semisolid dosage forms for topical drug delivery remains a challenging task. The work presented here highlights confocal Raman microscopy (CRM) as a valuable tool for the characterization of such products., Methods: CRM, a laser-based method, combining chemically-selective analysis and high resolution imaging, is used for the evaluation of different commercially available topical acyclovir creams., Results: We show that CRM enables the spatially resolved analysis of microstructural features of semisolid products and provides insights into drug distribution and polymorphic state as well as the composition and arrangement of excipients. Further, we explore how CRM can be used to monitor phase separation and to study skin penetration and the interaction with fresh and cryopreserved excised human skin tissue., Conclusion: This study presents a comprehensive overview and illustration of how CRM can facilitate several types of key analyses of semisolid topical formulations and of their interaction with their biological target site, illustrating that CRM is a useful tool for research, development as well as for quality testing in the pharmaceutical industry., (© 2022. The Author(s).)

Background: Delayed onset muscle soreness (DOMS) is a common non-structural muscle injury which can disrupt training and impair performance in elite athletes. Vibration therapy reduces inflammation and improves neuromuscular efficiency, leading to reductions in pain and stiffness, and may be effective for the prevention or treatment of DOMS. However, the effect of whole-body vibration (WBV) used after sport in elite athletes has not been reported., Methods: A randomised, controlled trial was performed. Participants were elite (national or international level) hockey players and underwent an eccentric exercise protocol previously shown to produce clinical DOMS. After exercise, one group underwent static stretching with WBV therapy, and the other performed stretching only. Baseline and serial post-exercise pain scores and measurements of quadriceps tightness were obtained., Results: Eleven participants were recruited into each study arm. There were no significant differences in baseline group characteristics. Participants receiving WBV had significant reductions in both pain (p = 0.04) and quadriceps tightness (p = 0.02) compared with stretching only., Conclusions: Post-exercise WBV is effective in elite hockey players to reduce DOMS after eccentric exercise. Elite athletes in multi-sprint sports are at risk of DOMS during training and competition, and its reduction could contribute to reduced injury risk and improved performance. This treatment modality is favourable because it can be incorporated with minimal disruption into the recovery section of existing training regimes. These findings may also be extrapolated to other multi-sprint sports., (© 2021. The Author(s).)

Topical products, widely used to manage skin conditions, have evolved from simple potions to sophisticated delivery systems. Their development has been facilitated by advances in percutaneous absorption and product design based on an increasingly mechanistic understanding of drug-product-skin interactions, associated experiments, and a quality-by-design framework. Topical drug delivery involves drug transport from a product on the skin to a local target site and then clearance by diffusion, metabolism, and the dermal circulation to the rest of the body and deeper tissues. Insights have been provided by Quantitative Structure Permeability Relationships (QSPR), molecular dynamics simulations, and dermal Physiologically Based PharmacoKinetics (PBPK). Currently, generic product equivalents of reference-listed products dominate the topical delivery market. There is an increasing regulatory interest in understanding topical product delivery behavior under 'in use' conditions and predicting in vivo response for population variations in skin barrier function and response using in silico and in vitro findings., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Rheological characteristics and shear response have potential implication in defining the pharmaceutical equivalence, therapeutic equivalence, and perceptive equivalence of commercial topical products. Three creams (C1 and C3 as oil-in-water and C2 as water-in-oil emulsions), and two gels (G1 and G2 carbomer-based) were characterized using the dynamic range of controlled shear in steady-state flow and oscillatory modes. All products, other than C3, met the Critical Quality Attribute criteria for high zero-shear viscosity ( η 0 ) of 2.6 × 10 4 to 1.5 × 10 5 Pa∙s and yield stress ( τ 0 ) of 55 to 277 Pa. C3 exhibited a smaller linear viscoelastic region and lower η 0 (2547 Pa∙s) and τ 0 (2 Pa), consistent with lotion-like behavior. All dose forms showed viscoelastic solid behavior having a storage modulus (G') higher than the loss modulus (G″) in the linear viscoelastic region. However, the transition of G' > G″ to G″ > G' during the continual strain increment was more rapid for the creams, elucidating a relatively brittle deformation, whereas these transitions in gels were more prolonged, consistent with a gradual disentanglement of the polymer network. In conclusion, these analyses not only ensure quality and stability, but also enable the microstructure to be characterized as being flexible (gels) or inelastic (creams).

Increasing emphasis is being placed on using in vitro permeation test (IVPT) results for topical products as a surrogate for their in vivo behaviour. This study sought to relate in vivo plasma concentration - time pharmacokinetic (PK) profiles after topical application of drug products to IVPT findings with mechanistic diffusion and compartment models that are now widely used to describe permeation of solutes across the main skin transport barrier, the stratum corneum. Novel in vivo forms of the diffusion and compartment-in-series models were developed by combining their IVPT model forms with appropriate in vivo disposition functions. Available in vivo and IVPT data were then used with the models in data analyses, including the estimation of prediction intervals for in vivo plasma concentrations derived from IVPT data. The resulting predicted in vivo plasma concentration - time profiles for the full models corresponded closely with the observed results for both nitroglycerin and rivastigmine at all times. In contrast, reduced forms of these in vivo models led to discrepancies between model predictions and observed results at early times. A two-stage deconvolution procedure was also used to estimate the in vivo cumulative amount absorbed and shown to be linearly related to that from IVPT, with an acceptable prediction error. External predictability was also shown using a separate set of in vitro and in vivo data for different nitroglycerin patches. This work suggests that mechanistic and physiologically based pharmacokinetic models can be used to predict in vivo behaviour from IVPT data for topical products., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Objective: The permeation of hydrophilic molecules through the skin is still a challenge due to the barrier posed by stratum corneum, the outermost layer of the skin. Liposomes have frequently been used as carriers for different types of drugs and may also function as permeation enhancers. Propylene glycol has also been used as an edge activator in liposomes to increase the permeation. The aim of this work was to prepare liposomes containing an edge activator and loaded with caffeine to evaluate the potential of caffeine reaching the deeper layers in the skin., Methods: The formulations were prepared by a top-down process using high-pressure homogenization at 200 00 psi for 10 min. They were characterized by size, polydispersity index (PI), zeta potential (ZP), pH, caffeine content and encapsulation efficiency (EE%) on preparation (time zero) and after 30 days. Cytotoxicity of blank and loaded liposomes was assessed by MTT proliferation assay with a normal keratinocyte cell line (HaCaT). In vitro permeation tests were performed with human skin in Franz cells over 24 h, and caffeine concentration was determined in the skin surface, stratum corneum, dermo-epidermal fraction and receptor medium by HPLC., Results: The caffeine liposomes with (DL-Caf) or without propylene glycol (CL-Caf) showed, respectively, mean size 94.5 and 95.4 nm, PI 0.48 and 0.42, ZP + 1.3 and + 18.1 mV and caffeine content of 78.57 and 80.13%. IC 50 values of caffeine in DL-Caf (3.59 v/v %) and CL-Caf (3.65 v/v %) were not significantly different from conventional blank liposome (3.27 v/v %). The DL-Caf formulation presented the best capability to enhance the caffeine permeation through the skin, resulting 1.94-folds higher than caffeine solution. Furthermore, the caffeine flux from DL-Caf was 1.56- and 3.05-folds higher than caffeine solution and CL-Caf, respectively. On the other hand, CL-Caf showed the lowest caffeine penetration revealing the importance of edge activator to aid hydrophilic drug penetration to all skin layers., Conclusion: The DL-Caf formulation tested was able to improve the permeation of caffeine through the stratum corneum and dermo-epidermal layers, suggesting that this delivery system may be effective for deep skin delivery of hydrophilic drugs., (© 2020 Society of Cosmetic Scientists and the Société Française de Cosmétologie.)

The topical delivery route is proposed as an alternative or adjunctive approach to melanoma treatment, since the target site for melanoma treatment-the epidermal basal layer-is potentially accessible by this route. Microemulsion systems are effective delivery vehicles for enhanced, targeted skin delivery. This work investigated the effect of Rose Bengal (RB) and RB-loaded self-emulsifying microemulsions (SEMEs) on growth inhibition of human melanoma and normal skin cell monolayers, the safety of the excipients incorporated in SEMEs on human cell lines, and the in-vitro human skin penetration of RB delivered in SEMEs and control solution. Cellular toxicity was assessed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and the growth inhibitory mechanism of RB was investigated by flow cytometry using PI staining. Unloaded SEMEs caused reduced cellular toxicity compared to the surfactant excipient, Labrasol ® . RB-loaded SEMEs increased cell growth inhibition compared to the RB aqueous solution. Flow cytometry revealed apoptotic cells after treatment with RB-loaded SEMEs, indicating that apoptosis may be one of the mechanisms of cell death. Preliminary results of multiphoton microscopy with fluorescence lifetime imaging (MPM-FLIM) analysis showed deeper penetration with greater skin concentrations of RB delivered from SEMEs compared to the RB aqueous solution. This study highlights the enhanced skin penetration and antimelanoma effects of RB loaded in a SEME system.

Introduction: Skin has been used as an administration route for local or systemic action since ancient times. The efficacy and toxicity of any product applied to the skin is determined by the chemical composition and physicochemical properties of the active(s) and excipients, which in turn govern their percutaneous absorption and effects., Areas Covered: This review addresses market trends, skin physiology, solute permeability, formulation properties and effects that are most relevant to a drug discovery scientist designing potentially active solutes for topical application. It also summarizes in silico model strategies, strengths, and limitations associated with the drug delivery design of topical products, with relevant examples., Expert Opinion: From a drug discovery perspective, many factors can determine the percutaneous absorption of an active solute. Current in silico models are limited by their dependence on data generated from the permeation of solutes across normal human skin from aqueous solutions. In practice, the choice of formulation, the pertinent skin physiology, and the solute properties, including its clearance, potency, and enhancement, also define dermal delivery. Consequently, there is an emerging trend of using in silico methods to inform effective drug design and development that are based on a combination of QSAR/QSPR with physiologically based pharmacokinetic and pharmacodynamic (PBPKPD) models.

In this work, we developed a number of generalised skin diffusion based pharmacokinetic models to relate published in vivo urinary excretion data to matching experimentally generated in vitro human skin permeation test (IVPT) data for a series of topically applied salicylate esters. A simplified linear in vivo model was found to inadequately describe the time course of urinary excretion over the entire sampling period. We represented the skin barrier as both a one layer (stratum corneum) and a two-layer (stratum corneum with viable epidermis) diffusion model and convoluted their Laplace solutions with that for a single exponential disposition phase to describe the urinary excretion profiles in the Laplace domain. We also derived asymptotic approximations for the model and estimated the conditions under which they could be used. We then sought to develop in vitro - in vivo relationships (IVIVR) for topically applied methyl, ethyl and glycol salicylates using our experimental IVPT data and the literature urinary excretion data. Good linear IVIVRs for ethyl and glycol salicylates were obtained, but the IVIVR for methyl salicylate was poor, perhaps because of topical stimulation of local skin blood flow by methyl salicylate. The ratio of the hydrated to dehydrated skin permeation for all salicylate esters was the same in both the IVPT and in vivo studies. A diffusion based one compartment pharmacokinetic model was also developed to describe the urinary excretion of solutes after removal of topical products and to compare the methyl salicylate skin permeation for five different body sites. The work presented here is consistent with the development of skin IVIVRs, but suggests that different skin conditions, application sites and local skin effects may affect model predictions., Competing Interests: Declaration of interest The authors have no conflicts of interest to declare., (Copyright © 2020. Published by Elsevier B.V.)

In recent years, the "quality by design" (QbD) approach has been used for developing pharmaceutical formulations. This is particularly important for complex dosage forms such as topical semisolid products. The first step for developing a product using this efficient approach is defining the quality target product profile (QTPP), a list of quality attributes (QAs) that are required to be present in the final product. These quality attributes are affected by the ingredients used as well as manufacturing procedure parameters. Hence, critical material attributes (CMAs) and critical process parameters (CPPs) need to be specified. Possible failure modes of a topical semisolid product can be determined based on the physiochemical properties of ingredients and manufacturing procedures. In this review, we have defined and specified QTPP, QAs, CMAs and CPPs that are required for developing a topical semisolid product based on the QbD approach., Competing Interests: The authors declare no conflict of interest.

Curcumin is a natural product with chemopreventive and other properties that are potentially useful in treating skin diseases, including psoriasis and melanoma. However, because of the excellent barrier function of the stratum corneum and the relatively high lipophilicity of curcumin (log P 3.6), skin delivery of curcumin is challenging. We used the principles of a Quality by Design (QbD) approach to develop nanoemulsion formulations containing biocompatible components, including Labrasol and Lecithin as surfactants and Transcutol and ethanol as cosurfactants, to enhance the skin delivery of curcumin. The nanoemulsions were characterised by cryo-SEM, Zeta potential, droplet size, pH, electrical conductivity (EC) and viscosity ( η ). Physicochemical long-term stability (6 months) was also investigated. The mean droplet sizes as determined by dynamic light scattering (DLS) were in the lower submicron range (20-50 nm) and the average Zeta potential values were low (range: -0.12 to -2.98 mV). Newtonian flow was suggested for the nanoemulsions investigated, with dynamic viscosity of the nanoemulsion formulations ranging from 5.8 to 31 cP. The droplet size of curcumin loaded formulations remained largely constant over a 6-month storage period. The inclusion of terpenes to further enhance skin permeation was also examined. All nanoemulsions significantly enhanced the permeation of curcumin through heat-separated human epidermal membranes, with the greatest effect being a 28-fold increase in maximum flux ( J max ) achieved with a limonene-based nanoemulsion, compared to a 60% ethanol in water control vehicle. The increases in curcumin flux were associated with increased skin diffusivity. In summary, we demonstrated the effectiveness of nanoemulsions for the skin delivery of the lipophilic active compound curcumin, and elucidated the mechanism of permeation enhancement. These formulations show promise as delivery vehicles for curcumin to target psoriasis and skin cancer, and more broadly for other skin delivery applications., Competing Interests: The authors declare no conflict of interest. Gattefossé and Croda provided some chemicals without cost, but gave no financial support. They had no role in the design of the study, in the collection, analysis, or interpretation of data, in the writing of the manuscript, or in the decision to publish the results.

Acne vulgaris is a common inflammatory pilosebaceous condition that affects 80-90% of adolescents. Since the introduction of tretinoin over 40 years ago, topical retinoid products have been a mainstay of acne treatment. The retinoids are very effective in addressing multiple aspects of the acne pathology as they are comedolytic and anti-inflammatory, and do not contribute to antibiotic resistance or microbiome disturbance that can be associated with long-term antibiotic therapies that are a common alternative treatment. However, topical retinoids are associated with skin dryness, erythema and pain, and may exacerbate dermatitis or eczema. Thus, there is a clear need to target delivery of the retinoids to the pilosebaceous units to increase efficacy and minimise side effects in surrounding skin tissue. This paper reviews the current marketed topical retinoid products and the research that has been applied to the development of targeted topical delivery systems of retinoids for acne.

Skin-targeting microscale medical devices are becoming popular for therapeutic delivery and diagnosis. We used cryo-SEM, fluorescence lifetime imaging microscopy (FLIM), autofluorescence imaging microscopy and inflammatory response to study the puncturing and recovery of human skin ex vivo and in vivo after discretised puncturing by a microneedle array (Nanopatch®). Pores induced by the microprojections were found to close by ~25% in diameter within the first 30 min, and almost completely close by ~6 h. FLIM images of ex vivo viable epidermis showed a stable fluorescence lifetime for unpatched areas of ~1000 ps up to 24 h. Only the cells in the immediate puncture zones (in direct contact with projections) showed a reduction in the observed fluorescence lifetimes to between ~518-583 ps. The ratio of free-bound NAD(P)H (α1/α2) in unaffected areas of the viable epidermis was ~2.5-3.0, whereas the ratio at puncture holes was almost double at ~4.2-4.6. An exploratory pilot in vivo study also suggested similar closure rate with histamine administration to the forearms of human volunteers after Nanopatch® treatment, although a prolonged inflammation was observed with Tissue Viability Imaging. Overall, this work shows that the pores created by the microneedle-type medical device, Nanopatch®, are transient, with the skin recovering rapidly within 1-2 days in the epidermis after application., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Zinc oxide is a widely used broad-spectrum sunscreen, but concerns have been raised about the safety of its nanoparticle (NP) form. We studied the safety of repeated application of agglomerated zinc oxide (ZnO) NPs applied to human volunteers over 5 days by assessing the skin penetration of intact ZnO-NPs and zinc ions and measuring local skin toxicity. Multiphoton tomography with fluorescence lifetime imaging microscopy was used to directly visualize ZnO-NP skin penetration and viable epidermal metabolic changes in human volunteers. The fate of ZnO-NPs was also characterized in excised human skin in vitro. ZnO-NPs accumulated on the skin surface and within the skin furrows but did not enter or cause cellular toxicity in the viable epidermis. Zinc ion concentrations in the viable epidermis of excised human skin were slightly elevated. In conclusion, repeated application of ZnO-NPs to the skin, as used in global sunscreen products, appears to be safe, with no evidence of ZnO-NP penetration into the viable epidermis nor toxicity in the underlying viable epidermis. It was associated with the release and penetration of zinc ions into the skin, but this did not appear to cause local toxicity., (Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.)

Background/aims: The mechanisms by which permeation enhancers increase human skin permeation of caffeine and naproxen were assessed in vitro., Methods: Active compound solubility in the vehicles and in the stratum corneum (SC), active compound flux across epidermal membranes and uptake of active and vehicle components into the SC were measured. The effect of vehicle pH on the permeation of caffeine and naproxen was also determined., Results: Oleic acid and eucalyptol significantly enhanced the skin penetration of caffeine and naproxen, compared to aqueous controls. Naproxen permeation was increased from vehicles with pH presenting more ionized naproxen. Caffeine maximum flux enhancement was associated with an increase in caffeine SC solubility and skin diffusivity, whereas for naproxen a penetration enhancer/vehicle-induced increase in solubility in the SC correlated with an increase in maximum flux. SC solubility was related to experimentally determined active uptake, which was in turn predicted by vehicle uptake and active compound solubility in the vehicle., Conclusion: A permeation enhancer-induced alteration in diffusivity, rather than effects on SC solubility, was the main driving force behind increases in permeation flux of the hydrophilic molecule caffeine. For the more the lipophilic molecule naproxen, increased SC solubility drove the increases in permeation flux., (© 2019 S. Karger AG, Basel.)

Background: Pig skin is a widely acknowledged surrogate for human skin for in vitro/ex vivo skin penetration studies with application for small molecules and nanosystems. We have investigated the influence of biological factors such as age and anatomical site on the penetration and distribution of nanoparticles (2.1 nm hydrophilic CdTe/CdS quantum dots: QDs) in adult pig skin (APS), weanling pig skin (WPS) and newborn pig skin (NBPS) at two different anatomical sites (ear and abdomen)., Methods: QDs in saline were applied to 1 × 1 cm2 skin (62.5 pmol/cm2) with 2-min finger rubbing using a standardized protocol. After 6- or 24-h incubation on Franz diffusion cells, tape stripping (×10) followed by manual follicular casting was conducted. Cadmium in QDs was quantified using inductively coupled plasma mass spectrometry for all samples. The presence of QDs in similarly treated skin samples was also captured using multiphoton tomography., Results: QDs were mainly localized in hair follicles after 6 and 24 h of exposure with no cadmium detected in the Franz cell receptor compartment regardless of pig age or anatomical site. The amount of QDs deposited in the follicles was similar at 6 h but higher on APS and WPS ears compared to NBPS ears at 24 h. This is associated with the high follicle density and small follicle diameter of the NBPS compared to the smaller density of much larger follicles on the APS. NBPS showed consistent QD distribution for ear and abdomen up to 24 h., Conclusions: There is minimal penetration of QDs through pig skin. Density and diameter of follicles in association with age of pigs and application site influenced the amount of QDs deposited in follicles. The structure of the stratum corneum, follicle density and diameter of NBPS are similar to human skin suggesting that NBPS is an appropriate model for human skin in the evaluation of topical applications of a range of chemicals including nanosystems., (© 2019 S. Karger AG, Basel.)

This overview on skin delivery considers the evolution of the principles of percutaneous absorption and skin products from ancient times to today. Over the ages, it has been recognised that products may be applied to the skin for either local or systemic effects. As our understanding of the anatomy and physiology of the skin has improved, this has facilitated the development of technologies to effectively and quantitatively deliver solutes across this barrier to specific target sites in the skin and beyond. We focus on these technologies and their role in skin delivery today and in the future., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Aim: We evaluated the effects of the incorporation of zinc oxide (ZnO) nanoparticles in a mesoporous matrix, aiming to improve the textural, structural and morphological properties and verify their safety so that they can be applied in sunscreen cosmetics., Materials and Methods: ZnO nano-particles were incorporated into an ordered mesoporous silica matrix known as Santa Barbara Amorphous-15 (SBA-15), using post-synthesis methodology. The resulting nanocomposites were characterized using X-ray diffraction, small angle X-ray scattering, N2 adsorption-desorption isotherms, Fourier transform infrared spectroscopy, scanning electron microscopy and predicted in vitro sun protector factor (SPF) estimation. Effectiveness and safety were evaluated by antimicrobial activity, in vitro cell toxicity and non-invasive multi-photon tomography with fluorescence lifetime imaging., Results: The structure of the nanocomposites was similar to that of SBA-15, with little perturbation caused by ZnO incorporation. Nanocomposites had an increased in vitro SPF, reduced cytotoxic activity and favourable antimicrobial properties compared to ZnO. ZnO:SBA-15 nanocomposites exhibited no measurable toxicity when applied to human skin in vivo., Conclusion: Due to their suitable physicochemical properties and improved safety compared to bare ZnO nanoparticles, the ZnO:SBA-15 nanocomposites show promise for use in cosmetic applications., (© 2018 S. Karger AG, Basel.)

Microscale medical devices are being developed for targeted skin delivery of vaccines and the extraction of biomarkers, with the potential to revolutionise healthcare in both developing and developed countries. The effective clinical development of these devices is dependent on understanding the macro-molecular diffusion properties of skin. We hypothesised that diffusion varied according to specific skin layers. Using three different molecular weights of rhodamine dextran (RD) (MW of 70, 500 and 2000 kDa) relevant to the vaccine and therapeutic scales, we deposited molecules to a range of depths (0-300 µm) in ex vivo human skin using the Nanopatch device. We observed significant dissipation of RD as diffusion with 70 and 500 kDa within the 30 min timeframe, which varied with MW and skin layer. Using multiphoton microscopy, image analysis and a Fick's law analysis with 2D cartesian and axisymmetric cylindrical coordinates, we reported experimental trends of epidermal and dermal diffusivity values ranging from 1-8 µm 2 s -1 to 1-20 µm 2 s -1 respectively, with a significant decrease in the dermal-epidermal junction of 0.7-3 µm 2 s -1 . In breaching the stratum corneum (SC) and dermal-epidermal junction barriers, we have demonstrated practical application, delivery and targeting of macromolecules to both epidermal and dermal antigen presenting cells, providing a sound knowledge base for future development of skin-targeting clinical technologies in humans.

The primary objective of this study is to introduce a simple and flexible mathematical approach which models transport processes in skin using compartments. The main feature of the presented approach is that the rate constants for exchange between compartments are derived from physiologically relevant diffusional transport parameters. This allows for better physical interpretation of the rate constants, and limits the number of parameters for the compartmental model. The resulting compartmental solution is in good agreement with previously published solutions for the diffusion model of skin when ten or more compartments are used. It was found that the new compartmental model with three compartments provided a better fit of the previously publish water penetration data than the diffusion model. Two special cases for which it is difficult to implement the diffusion model were considered using our compartmental approach. In both cases the compartmental model predictions agreed well with the diffusion model., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The mathematical model describing drug flux through microporated skin was previously developed. Based on this model, two mathematical equations can be used to predict the microporatio-enhanced transdermal drug flux: the complex primal equation containing a variety of experimentally-determined variables, and the simplified straightforward equation. In this study, experimental transdermal fluxes of three corticosteroids through split-thickness human skin treated with a microneedle roller were measured, and the values of fluxes compared with those predicted using both the more complex and simplified equations. According to the results of the study, both equations demonstrated high accuracy in the prediction of the fluxes of corticosteroids. The simplified equation was validated and confirmed as robust using regression analysis of literature data. Further, its capability and ease of use was exemplified by predicting the flux of methotrexate through the skin microporated with laser and comparing with published experimental data., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this work, we examined enhanced skin delivery of minoxidil applied in nanoemulsions incorporating skin penetration enhancers. Aliquots of fully characterized oil-in-water nanoemulsions (1 mL), containing minoxidil (2%) and the skin penetration enhancer oleic acid or eucalyptol as oil phases, were applied to full-thickness excised human skin in Franz diffusion cells, while aqueous solutions (1 mL) containing minoxidil were used as controls. Minoxidil in the stratum corneum (SC), hair follicles, deeper skin layers, and flux through the skin over 24 h was determined, as well as minoxidil solubility in the formulations and in the SC. The nanoemulsions significantly enhanced the permeation of minoxidil through skin compared with control solutions. The eucalyptol formulations (NE) promoted minoxidil retention in the SC and deeper skin layers more than did the oleic acid formulations, while the oleic acid formulations (NO) gave the greatest hair follicle penetration. Minoxidil maximum flux enhancement was associated with increases in both minoxidil SC solubility and skin diffusivity in both nanoemulsion systems. The mechanism of enhancement appeared to be driven largely by increased diffusivity, rather than increased partitioning into the stratum corneum, supporting the concept of enhanced fluidity and disruption of stratum corneum lipids., Competing Interests: The authors declare no conflict of interest.

It is critical to develop an effective understanding of the interaction between the drug, delivery system and skin in order to predict and assess skin penetration and permeation. Experimental models for the assessment of topical and transdermal delivery systems must permit evaluation of these complex interactions. Whilst in the past, animal models were commonly used, recent regulatory guidelines, based on 3R principles (refinement, reduction, replacement), encourage the rational use of animals. Alternative methods have been proposed for use in the development of topical and transdermal delivery systems which are often used in combination. We will review the current state of the art in alternative methods for topical and transdermal delivery systems development, including technologies that can assist in the characterization of skin penetration/permeation studies., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

Background/aims: This study aimed to investigate transfollicular delivery enhancement of caffeine from nanoemulsion formulations incorporating oleic acid (OA) and eucalyptol (EU) as chemical penetration enhancers., Methods: Caffeine permeation was evaluated from nanoemulsions containing OA or EU and an aqueous control solution through excised human full-thickness skin with hair follicles opened, blocked, or left untreated. Differential tape stripping was performed, followed by cyanoacrylate skin surface biopsies to determine the amount of caffeine in the hair follicles, and skin extraction to determine the retention of caffeine in the skin., Results: Nanoemulsions significantly increased caffeine permeation through open and untreated skin over control (untreated: 36- and 42-fold for OA and EU, respectively; open: 40- and 49-fold). The follicular route contributed 53.7% of caffeine permeation for the OA nanoemulsion and 51% for EU when follicles were opened. Nanoemulsions promoted 4- and 3.4-fold increases in caffeine retention in open follicles, for OA and EU, respectively. Retention of caffeine in the stratum corneum and skin was almost equal in all cases., Conclusions: This study demonstrated effective delivery of caffeine as a hydrophilic model drug into and through hair follicles and showed that follicles and surrounding regions may be targeted by optimised formulations for specific treatments., (© 2018 S. Karger AG, Basel.)