Search

Potential for off-target movements follows every herbicide application. Because the launch of acetolactate synthase (ALS)- and 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicide-tolerant crops will increase the treated area, there is a need to assess the possible negative consequences of any particle drift from those herbicides. Drift happens with every pesticide application, requiring mitigation. Various factors influence drift. Some, such as nozzle type, working pressure, and boom height, can be managed. Others, such as wind, are not easy to manage. In our study, an herbicide tank mixture of mesotrione with rimsulfuron plus thifensulfuron-methyl was sprayed in a low-speed wind tunnel to simulate drift. The airspeed was set at 4.4 m s

Field experiments were conducted across multiple sites in 2012 and 2013 to describe sensitivity of soybean to 2,4-D (six doses) and dicamba (seven doses) at V3 and R1 growth stages. Further experiments were conducted under greenhouse conditions in 2017 and 2018 to compare soybean response to several dicamba herbicides across a broader range of doses than those tested in the field.Soybean yield loss was 6.1-fold greater from 2,4-D exposure at V3 compared to R1 and 1.4 times greater from dicamba exposure at R1 than at V3. In V3 exposures, soybean was 15.4 times more sensitive to dicamba than 2,4-D and 134.4-fold more sensitive to dicamba when exposed at R1. Plant injury and height correlations to grain yield resulted in coefficients ranging from 0.65 to 0.91. In greenhouse experiments, five dicamba products were tested at up to 19 doses and as low as 0.002 g ae haThese data suggest that the sensitivity of soybean to dicamba is much greater than what has previously been reported. However, as has been indicated by previous work, that injury does not always result in yield loss. © 2022 Society of Chemical Industry.

Crop residue can intercept and adsorb residual herbicides, leading to reduced efficacy. However, adsorption can sometimes be reversed by rainfall or irrigation. Greenhouse experiments were conducted to evaluate the effect of differential overhead irrigation level on barnyardgrass response to acetochlor, pyroxasulfone, and pendimethalin applied to bare soil or wheat straw–covered soil. Acetochlor applied to wheat straw–covered soil resulted in 25% to 40% reduced control, 30 to 50 more plants 213 cm−2, and greater biomass than bare soil applications, regardless of irrigation amount. Barnyardgrass suppression by pyroxasulfone applications to wheat straw–covered soil improved with increased irrigation; however, weed control levels similar to bare soil applications were not observed after any irrigation amount. Barnyardgrass densities from pyroxasulfone applications to bare soil decreased with irrigation but did not change in applications to wheat straw–covered soil. Aboveground barnyardgrass biomass from pyroxasulfone decreased with greater irrigation amounts in both bare soil and wheat straw–covered soil applications; however, decreased efficacy in wheat straw–covered soil applications was not alleviated with irrigation. Pendimethalin was the only herbicide tested that displayed reduced efficacy when irrigation amounts increased in applications to both bare soil and wheat straw–covered soil. Barnyardgrass control from pendimethalin applied to wheat straw–covered soil was similar to bare soil applications when approximately 0.3 to 1.2 cm of irrigation was applied; however, irrigation amounts greater than 1.2 cm resulted in greater barnyardgrass control in bare soil applications. No differences between wheat straw–covered soil and bare soil applications of pendimethalin were observed for barnyardgrass densities. These data indicate that increased irrigation or rainfall level can increase efficacy of acetochlor and pyroxasulfone. Optimal rainfall or irrigation amounts required for efficacy similar to bare soil applications are herbicide specific, and some herbicides, such as pendimethalin, may be adversely affected by increased rainfall or irrigation.

Early-postemergence herbicide applications in the USA often include residual herbicides such as S-metolachlor to suppress late late-emerging Amaranthus spp. Although this practice benefits weed control, herbicide tankmixes can influence spray droplet size and drift potential during applications. The addition of S-metolachlor products to dicamba spray solutions generally decreases spray droplet size and increases spray drift potential. Advances in formulation technology fostered the development of products with reduced spray drift potential, especially for herbicide premixes containing multiple active ingredients. The objective of this study was to compare the drift potential of a novel dicamba plus S-metolachlor premix formulation (capsule suspension) against a tankmix containing dicamba (soluble liquid) and S-metolachlor (emulsifiable concentrate) using different venturi nozzles.The MUG nozzle had greater DStudy results evidence that advances in pesticide formulation can improve pesticide drift mitigation. © 2021 Society of Chemical Industry.

XtendFlex® technology from Bayer allows growers to apply glyphosate, glufosinate, and dicamba POST to cotton. Since the evolution and spread of glyphosate-resistant weed species, early POST applications with several modes of action have become common. However, crop injury potential from these applications warrants further examination. Field studies were conducted from 2015 to 2017 at two locations in Mississippi to evaluate XtendFlex® cotton injury from herbicide application. Herbicide applications were made to XtendFlex® cotton at the three- to six-leaf stage with herbicide combinations composed of two-, three-, and four-way combinations of glyphosate, glufosinate,S-metolachlor, and three formulations of dicamba. Data collection included visual estimations of injury, stand counts, cotton height, total mainstem nodes, and nodes above whiteflower at first bloom. Data collection at the end of the season included cotton height, total mainstem nodes, and nodes above cracked boll. Visual estimations of injury from herbicide applications were highest at 3 d following applications containing glufosinate +S-metolachlor (36% to 41% injury) and glufosinate +S-metolachlor in combination with dicamba + glyphosate (39% to 41% injury), regardless of the dicamba formulation. Crop injury decreased at each rating interval and dissipated by 28 d following applications (P = 0.3748). Height reductions were present at first bloom and at the end of the season (P < 0.0001), although cotton yield was unaffected (P = 0.2089), even when injury at 3 d after application was greater than 30%. Results indicate that growers may apply a variety of herbicide tank mixtures to XtendFlex® cotton and expect no yield penalty. Furthermore, if growers are concerned with cotton injury after herbicide applications, the use of glufosinate in combination withS-metolachlor should be approached with caution in XtendFlex® cotton.

Background Field experiments were conducted across three sites in Mississippi in 2018 to evaluate carrier volume and spray quality effects on glyphosate-resistant soybean response to dicamba. Treatments consisted of dicamba (5.6 g ae ha-1 ) plus glyphosate (8.7 g ae ha-1 ) applied to soybean at R1 using 140, 105, 70, 35, 14, or 7 L ha-1 . Each carrier volume was applied with TT11002 and XR110015 nozzles which resulted in Fine and Coarse spray qualities, respectively. A colorimetric dye was included in spray solutions to quantify spray coverage of each treatment. Results Spray coverage decreased with carrier volume and ranged from 21 to 3%. Conversely, soybean injury increased as carrier volume decreased. Soybean height 14 d after treatment (DAT) was reduced 34 to 37% from carrier volumes of 70 to 140 L ha-1 ; however, carrier volumes of 14 and 7 L ha-1 resulted in 45% height reductions. By 28 DAT soybean height was similar among volumes of 35 to 140 L ha-1 (39 to 42% reduction); however, volumes of 14 and 7 L ha-1 resulted in 46 and 51% reductions, respectively. Grain yield was reduced 14% from treatment at 140 L ha-1 and reductions increased with decreased carrier volume to 41% loss at 7 L ha-1 . Averaged across carrier volumes, Fine and Coarse sprays caused 30 and 26% yield loss, respectively. Conclusion These data suggest that carrier volume profoundly affects soybean response to dicamba. Therefore, soybean response to sublethal dicamba doses applied at a constant carrier volume may not reflect physical drift exposure. This article is protected by copyright. All rights reserved.

Enlist® cotton with tolerance to 2,4-D choline, glyphosate, and glufosinate became publicly available in 2016 to aid growers in controlling glyphosate-resistant weed species. Little data exist regarding the tolerance of Enlist cotton to herbicide tank mixtures containing glyphosate, glufosinate, 2,4-D choline, and S-metolachlor. The objective of this study was to evaluate the tolerance of Enlist cotton to herbicide tank mixtures including these herbicides. Field studies were conducted in 2016 and 2017 where cotton was sprayed with herbicide combinations containing glyphosate, glufosinate, S-metolachlor, 2,4-D choline, and a premix formulation of glyphosate and S-metolachlor. Crop injury consisted of necrosis, chlorosis, visual stunting, injury on new growth, and total injury at 7, 14, and 28 days after application (DAA). Cotton lint yield was recorded at the conclusion of each growing season. The greatest levels of necrosis and total injury at 7 DAA were observed following applications of glufosinate + S-metolachlor, alone or in combination with glyphosate or glyphosate + 2,4-D choline. The least amount of necrosis and total injury at 7 DAA was observed following applications of glyphosate, glufosinate, S-metolachlor, glyphosate + glufosinate, or glyphosate + S-metolachlor, which produced less than 13% injury. Visual injury at 14 DAA ranged from 8 to 16% across herbicides applied. At 28 DAA, no differences in visual injury were reported. Lint yield was unaffected by herbicide application. Although transient visual injury is expected, Enlist cotton withstood herbicide applications with up to four modes of action in tankmixture without suffering yield reduction.

Throughout eastern Arkansas, Palmer amaranth resistant to protoporphyrinogen oxidase (PPO)-inhibiting herbicides (Group 14 herbicides) has become widespread. Most PPO-resistant Palmer amaranth biotypes possess a target-site mutation, but a metabolic resistance mechanism to fomesafen (Group 14) has also been identified. Once metabolic resistance manifests, plants may also be tolerant to other herbicides and sites of action. To evaluate whether varying spray parameters affected control of PPO-resistant Palmer amaranth in dicamba-tolerant crops, field trials were conducted in 2017 and 2018 at the Lon Mann Cotton Research Station near Marianna, AR, and on-farm in Marion, AR. The experiment included split plot factors of dicamba rate, nozzle type, and carrier volume, with a whole plot factor of population. Dicamba was applied at 560 or 1120 g ae ha−1 through 110015 TTI or AirMix nozzles at 70 or 140 L ha−1 to PPO-resistant or PPO-susceptible Palmer amaranth. Palmer amaranth control 14 d after treatment (DAT) was influenced by an interaction between population and carrier volume. PPO-resistant Palmer amaranth control 14 DAT was 81% regardless of carrier volume, compared with 90% and 95% control at 70 and 140 L ha−1, respectively, of the PPO-susceptible population. An interaction between nozzle type and carrier volume influenced Palmer amaranth control 21 DAT, whereas AirMix nozzles at 140 L ha−1 controlled Palmer amaranth at a greater level (94%) than any other nozzle and carrier volume combination (≤90%). An interaction between population and dicamba rate influenced the relative density of Palmer amaranth 21 DAT. PPO-resistant Palmer amaranth density was less affected by dicamba at either rate than PPO-susceptible Palmer amaranth, relative to the nontreated check. Results concur with those of other research that suggest PPO-resistant Palmer amaranth is harder to control with dicamba. Otherwise, increasing carrier volume affected overall Palmer amaranth control to a greater degree than any other factor.

Proper management of glufosinate in glufosinate-resistant crop technologies is needed to mitigate the likelihood of resistance evolution. Antagonism may result from mixtures of glufosinate and other commonly used POST herbicides in soybean and cotton. Two experiments were conducted at the Arkansas Agricultural Research and Extension Center in Fayetteville, AR, in 2015 and 2016 to evaluate mixtures of glufosinate + clethodim and glufosinate + glyphosate on barnyardgrass, broadleaf signalgrass, johnsongrass, and large crabgrass. Furthermore, droplet spectra analyses were conducted to determine if droplet size was associated with identification of herbicide interactions. Antagonism was dependent on the herbicide rates and the weed species. For barnyardgrass and large crabgrass control 4 wk after treatment, glufosinate + glyphosate was antagonistic at all rates evaluated. When large crabgrass was evaluated, some mixtures (e.g., 595 g ha–1 glufosinate + 76 g ha–1 clethodim) had a significant reduction in control relative to one of the herbicides applied alone. Glufosinate (451 and 595 g ai ha–1) + glyphosate (867 and 1,735 g ae ha–1) was antagonistic at all four possible rate combinations for broadleaf signalgrass control. Fewer instances of antagonism were observed for seedling johnsongrass control than for other species, but certain treatments were identified as antagonistic (e.g., glufosinate at 451 g ai ha–1 + clethodim at 76 g ai ha–1). Overall, antagonism was less likely and greater control was observed when the highest rates of both herbicides in a given mixture were used. The addition of glyphosate or clethodim to glufosinate can increase the volume median diameter and decrease the percentage volume of fines, compared to glufosinate alone. The droplet spectra analyses indicate that the glufosinate performance may be negatively affected by the addition of glyphosate or clethodim.Nomenclature: Clethodim; glyphosate; glufosinate; barnyardgrass, Echinochloa crus-galli (L.) Beauv.; broadleaf signalgrass, Urochloa platyphylla (Griseb.) Nash; johnsongrass, Sorghum halepense (L.) Pers.; large crabgrass, Digitaria sanguinalis L.; cotton, Gossypium hirsutum L.; soybean, Glycine max (L.) Merr.

The introduction of 2,4-D–resistant soybean and cotton provided growers a new POST active ingredient to include in weed management programs. The technology raises concerns regarding potential 2,4-D off-target movement to sensitive vegetation, and spray droplet size is the primary management factor focused on to reduce spray particle drift. The objective of this study was to investigate the droplet size distribution, droplet velocity, and particle drift potential of glyphosate plus 2,4-D choline pre-mixture (Enlist Duo®) applications with two commonly used venturi nozzles in a low-speed wind tunnel. Applications with the TDXL11004 nozzle had larger DV0.1 (291 µm), DV0.5 (544 µm), and DV0.9 (825 µm) values compared with the AIXR11004 nozzle (250, 464, and 709 µm, respectively), and slower average droplet velocity (8.1 m s−1) compared with the AIXR11004 nozzle (9.1 m s−1). Nozzle type had no influence on drift deposition (P = 0.65), drift coverage (P = 0.84), and soybean biomass reduction (P = 0.76). Although the TDXL11004 nozzle had larger spray droplet size, the slower spray droplet velocity could have influenced the nozzle particle drift potential. As a result, both TDXL11004 and AIXR11004 nozzles had similar spray drift potential. Further studies are necessary to understand the impact of droplet velocity on drift potential at field scale and test how different tank solutions, sprayer configurations, and environmental conditions could influence the droplet size and velocity dynamics and consequent drift potential in pesticide applications.

Objectives Advanced tools and resources are needed to efficiently and sustainably produce food for an increasing world population in the context of variable environmental conditions. The maize genomes to fields (G2F) initiative is a multi-institutional initiative effort that seeks to approach this challenge by developing a flexible and distributed infrastructure addressing emerging problems. G2F has generated large-scale phenotypic, genotypic, and environmental datasets using publicly available inbred lines and hybrids evaluated through a network of collaborators that are part of the G2F’s genotype-by-environment (G × E) project. This report covers the public release of datasets for 2014–2017. Data description Datasets include inbred genotypic information; phenotypic, climatic, and soil measurements and metadata information for each testing location across years. For a subset of inbreds in 2014 and 2015, yield component phenotypes were quantified by image analysis. Data released are accompanied by README descriptions. For genotypic and phenotypic data, both raw data and a version without outliers are reported. For climatic data, a version calibrated to the nearest airport weather station and a version without outliers are reported. The 2014 and 2015 datasets are updated versions from the previously released files [1] while 2016 and 2017 datasets are newly available to the public.

There is renewed interest amongst crop protection professionals and regulators in the adoption of spray hoods to further reduce pesticide off-target movement during applications. Although the benefits of sprayer hoods have been reported since the early 1950s, adoption has been relatively low among farmers and applicators. The objective of this study was to evaluate the effectiveness of spray hoods in reducing pesticide drift of spray solutions from nozzles typically used for herbicide applications in row crops with tolerance to dicamba or 2,4-D.Hooded applications substantially reduced spray drift potential across all treatment scenarios compared to conventional applications. Hooded applications using the AIXR nozzle without drift-reducing adjuvant (DRA) had a similar area under the drift curve (31.5) compared to conventional applications (open sprayer) using the TTI nozzle with DRA (27.7), despite the major droplet size differences between these treatments (DThese results indicate that the adoption of spray hoods combined with proper nozzle selection, and the use of DRAs can substantially reduce spray drift potential during pesticide applications. The use of this technology can be complementary to other drift-reducing technologies. © 2021 Society of Chemical Industry.

Dicamba is an important herbicide for controlling post-emergent resistant weeds in soybean farming. Recently, the scientific community and general public have further examined off-target transport mechanisms (e.g., spray drift, volatilization, and tank contamination) and the visual responses of soybeans to ultralow dicamba concentrations. This paper synthesizes key chemical concepts and environmental processes associated with dicamba formulations, transport mechanisms, drift measurements, and plant responses. This paper proposes additional areas of research and actions to increase our understanding and communicate the science findings, which should provide farmers with more robust tools and practices for sustainable dicamba use.

Acifluorfen is a nonsystemic PPO-inhibiting herbicide commonly used for POST Palmer amaranth control in soybean, peanut, and rice across the southern United States. Concerns have been raised regarding herbicide selection pressure and particle drift, increasing the need for application practices that optimize herbicide efficacy while mitigating spray drift. Field research was conducted in 2016, 2017, and 2018 in Mississippi and Nebraska to evaluate the influence of a range of spray droplet sizes [150 µm (Fine) to 900 µm (Ultra Coarse)], using acifluorfen to create a novel Palmer amaranth management recommendation using pulse width modulation (PWM) technology. A pooled site-year generalized additive model (GAM) analysis suggested that 150-µm (Fine) droplets should be used to obtain the greatest Palmer amaranth control and dry biomass reduction. Nevertheless, GAM models indicated that only 7.2% of the variability observed in Palmer amaranth control was due to differences in spray droplet size. Therefore, location-specific GAM analyses were performed to account for geographical differences to increase the accuracy of prediction models. GAM models suggested that 250-µm (Medium) droplets optimize acifluorfen efficacy on Palmer amaranth in Dundee, MS, and 310-µm (Medium) droplets could sustain 90% of maximum weed control. Specific models for Beaver City, NE, indicated that 150-µm (Fine) droplets provide maximum Palmer amaranth control, and 340-µm (Medium) droplets could maintain 90% of greatest weed control. For Robinsonville, MS, optimal Palmer amaranth control could be obtained with 370-µm (Coarse) droplets, and 90% maximum control could be sustained with 680 µm (Ultra Coarse) droplets. Differences in optimal droplet size across location could be a result of convoluted interactions between droplet size, weather conditions, population density, plant morphology, and soil fertility levels. Future research should adopt a holistic approach to identify and investigate the influence of environmental and application parameters to optimize droplet size recommendations.Nomenclature: Acifluorfen; Palmer amaranth, Amaranthus palmeri S. Wats., AMAPA; peanut, Arachis hypogaea L.; rice, Oryza sativa L.; soybean, Glycine max (L.) Merr

Highlights The AIXR nozzle and modified vegetable oil reduce drift potential. Downwind spray deposition increases non-linearly as airspeed increases. Nozzle selection is more important than adjuvant to mitigate spray drift. Abstract. Spray drift is a critical concern for pesticide applications and the largest focus for its reduction has been placed on increasing droplet size. The objectives of this research were to evaluate the influence of nozzle type, adjuvant, and airspeed on the droplet spectrum and spray drift deposits from applications of glyphosate plus 2,4-D in a wind tunnel. Two studies were conducted using three 11002 nozzles types (XR, DG, and AIXR) individually attached to a one-tip boom. The working pressure was 207 kPa. The first study evaluated drift from the potassium salt of glyphosate (1260 g ae ha-1) plus 2,4-D amine (450 g ae ha-1) tank-mixed with four adjuvants (individually) sprayed at 2.2 m s-1 airspeed. A glyphosate plus 2,4-D solution with no tank-mixed adjuvants was also evaluated. The second study evaluated drift from glyphosate plus 2,4-D applications in four airspeeds (0.9, 2.2, 3.6, and 4.9 m s-1). Drift potential was determined using 2 mm monofilament line collectors and a 1,3,6,8-pyrenetetrasulfonic acid tetra sodium salt (PTSA) fluorescent tracer added to solutions, quantified by fluorometry. Nozzles and adjuvants influenced droplet size distribution of glyphosate plus 2,4-D solutions. Among the nozzles, the AIXR produced the coarsest droplets and the lowest tracer deposits (12 ηg cm-2) at 12 m downwind regardless of solution type. When nozzles were pooled, the modified vegetable oil (MVO) reduced the spray deposition by 36% at 12 m compared to the solution without adjuvant. At 4.9 m s-1 airspeed, tracer deposit at 12 m downwind was 2-fold lower when applications were made through low-drift nozzles (DG and AIXR) compared to the XR nozzle. Results suggest that drift-reducing adjuvants tested in this study may not reduce drift and nozzle selection should be considered as a more important factor than adjuvants in order to mitigate spray drift.

Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 µm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-µm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-µm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-µm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-µm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.Nomenclature: Acifluorfen; lactofen; Palmer amaranth, Amaranthus palmeri S. Wats. AMAPA

Striacosta albicosta (Smith) is a maize pest that has recently expanded its geographical range into the eastern United States and southeastern Canada. Aerial application of pyrethroids, such as bifenthrin, has been a major practice adopted to manage this pest. Reports of field failure of pyrethroids have increased since 2013. Striacosta albicosta populations were collected in 2016 and 2017 from maize fields in Nebraska, Kansas, and Canada and screened with bifenthrin active ingredient in larval contact dose-response bioassays. Resistance ratios estimated were generally low in 2016 (1.04- to 1.32-fold) with the highest LC50 in North Platte, NE (66.10 ng/cm2) and lowest in Scottsbluff, NE (50.10 ng/cm2). In 2017, O’Neill, NE showed the highest LC50 (100.66 ng/cm2) and Delhi, Canada exhibited the lowest (6.33 ng/cm2), resulting in a resistance ratio variation of 6.02- to 15.90-fold. Implications of bifenthrin resistance levels were further investigated by aerial application simulations. Experiments were conducted with a spray chamber where representative S. albicosta populations were exposed to labeled rates of a commercial bifenthrin formulation. Experiments resulted in 100% mortality for all populations, instars, insecticide rates, and carrier volumes, suggesting that levels of resistance estimated for bifenthrin active ingredient did not seem to impact the efficacy of the correspondent commercial product under controlled conditions. Results obtained from this research indicate that control failures reported in Nebraska could be associated with factors other than insecticide resistance, such as issues with the application technique, environmental conditions during and/or after application, or the insect’s natural behavior. Data generated will assist future S. albicosta resistance management programs.

A field-scale, spray drift study with atrazine was conducted to simultaneously measure spray drift deposition, airborne interception and corresponding biological effects on two sensitive plant species (cucumber and lettuce). Applications of AAtrex 4L (atrazine) were made using ultra-coarse nozzles (TeeJet TTI11004) under worst-case drift potential conditions of bare soil and high wind speeds (i.e. >10 mph; >16 kph). This study was replicated 4 times, each with two parallel spray swaths (92.5 ft or 28 m per swath) perpendicular to wind direction. Within each replicate application, three sampling lines were used to measure drift deposition (using stainless-steel discs) at distances out to 400 ft (122 m), airborne interception (using stainless-steel rods) at distances out to 75 ft (23 m), and potential direct plant effects at 5, 15, 25, 35, and 45 ft (1.5, 4.6, 7.6, 10.7, and 13.7 m) from the downwind edge of the spray swath. Corresponding upwind control discs and plants were also included in each replicate. Each replicate application targeted steady wind speeds between 10 and 15 mph (16 and 24 kph) within a 30-degree angle of the downwind field orientation. On average, each 10% increase in distance from the spray zone resulted in approximately 14% less ground-deposited atrazine. Between 7 and 41× more atrazine mass was collected from vertical rods (airborne drift), compared to horizontally placed stainless-steel discs (ground deposition). Cucumber and lettuce plants exposed to spray drift were monitored for biological effects over 21 days post-application according to standard protocols. Endpoints of survival, weight (biomass), and shoot length were evaluated by comparing distance groups to up-wind controls. Overall, when trials were combined, the aggregate lowest observable effect distance (LOED) was 5-ft (1.5 m) and the aggregate no observable effects distance (NOED) was 15-ft (4.6 m), with cucumbers affected more than lettuce.

Root-associated microbial communities are important for maintaining agricultural productivity. However, belowground microbial community response to drought in temperate maize agroecosystems, as well as how these responses to water-stress are shaped by host genotype are poorly understood. Ten maize hybrids (six newer and four older) were grown in a replicated field trial. The endosphere, rhizosphere and soil bacterial and archaeal communities were sampled and analyzed using 16S rRNA gene amplicon sequencing. Sampling was done at two developmental stages in a water-limited environment with and without supplemental irrigation. Significant shifts in microbial community composition (β-diversity) were measured between two sampling times during the season, in well-watered and water-stressed conditions and in newer and older generation maize hybrids. The microbial community diversity within samples (α-diversity) was not affected by drought stress or host factors. The phyla Actinobacteria and Firmicutes were more abundant in the rhizosphere of newer hybrids under water stress. These results highlight the importance of temporal variation, environmental stress and plant genetics as influenced by breeding history in shaping the composition of root associated microbial communities. These insights may provide new approaches to the improvement of crop stress tolerance through optimizing microbial communities.

Pulse-width modulation (PWM) sprayers can improve application accuracy through flow control, turn compensation, and high-resolution overlap control by pulsing an electronically-actuated solenoid valve which controls the relative proportion of time each solenoid valve is open (duty cycle). The objective of this experiment was to identify the droplet size distribution and nozzle tip pressure when influenced by PWM duty cycle, nozzle technology, and gauge pressure to provide PWM guidelines. The experiment was conducted in a low-speed wind tunnel at the Pesticide Application Technology Laboratory using a SharpShooter® PWM system. In general, for non-venturi nozzles, as duty cycle decreased, droplet size slightly increased between 40 and 100% duty cycles. Conversely, venturi nozzles did not always follow this trend. The lowest duty cycle evaluated (20%) negatively impacted droplet size and caused inconsistencies for all nozzle by pressure combinations. The addition of a solenoid valve lowered nozzle tip pressure while gauge pressure remained constant indicating a restriction is present within the solenoid valve. Greater orifice sizes increased the pressure loss observed. Duty cycle minimally impacted nozzle tip pressure trends which were similar to the electrical square wave PWM signals. However, venturi nozzles deviated from this trend, specifically twin-fan, single pre-orifice venturi nozzles. In conclusion, venturi nozzles are not recommended for PWM systems as they may lead to inconsistent applications, specifically in regards to droplet size generation and nozzle tip pressures. Spray pressures of 276 kPa or greater and PWM duty cycles of 40% or greater are recommended to ensure proper PWM operation.

Chemical weed control remains a widely used component of integrated weed management strategies because of its cost-effectiveness and rapid removal of crop pests. Additionally, dicamba-plus-glyphosate mixtures are a commonly recommended herbicide combination to combat herbicide resistance, specifically in recently commercially released dicamba-tolerant soybean and cotton. However, increased spray drift concerns and antagonistic interactions require that the application process be optimized to maximize biological efficacy while minimizing environmental contamination potential. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of six site-years. The objectives were to characterize the efficacy of a range of droplet sizes [150 µm (Fine) to 900 µm (Ultra Coarse)] using a dicamba-plus-glyphosate mixture and to create novel weed management recommendations utilizing pulse-width modulation (PWM) sprayer technology. Results across pooled site-years indicated that a droplet size of 395 µm (Coarse) maximized weed mortality from a dicamba-plus-glyphosate mixture at 94 L ha–1. However, droplet size could be increased to 620 µm (Extremely Coarse) to maintain 90% of the maximum weed mortality while further mitigating particle drift potential. Although generalized droplet size recommendations could be created across site-years, optimum droplet sizes within each site-year varied considerably and may be dependent on weed species, geographic location, weather conditions, and herbicide resistance(s) present in the field. The precise, site-specific application of a dicamba-plus-glyphosate mixture using the results of this research will allow applicators to more effectively utilize PWM sprayers, reduce particle drift potential, maintain biological efficacy, and reduce the selection pressure for the evolution of herbicide-resistant weeds.

Dicamba plus glyphosate tank mixture have been largely adopted for postemergence weed control after the development of dicamba-tolerant crops. Ammonium sulfate is commonly used as water conditioner (WC) to increase glyphosate efficacy, but its use is restricted for dicamba herbicides. The use of non-AMS water conditioner and other adjuvants could be a way to optimize efficacy of this tank mixture while mitigating herbicide off-target movement. The objective of this study was to determine the physical–chemical properties and droplet size distribution of dicamba and glyphosate solutions with and without non-AMS WC alone and tank mixed with other adjuvants and evaluate the response of weed species to these solutions under greenhouse and field conditions. The adjuvants mostly increased density and viscosity and decreased contact angle and surface tension of herbicide solutions. In presence of WC, except for the adjuvants containing drift reducing agent, Dv0.5 decreased with the addition of adjuvants. Under greenhouse conditions, biomass reduction increased up to 47 and 33 percentage points for velvetleaf and c. waterhemp when adjuvants were added to solutions without WC, respectively. No increase in control of horseweed and Palmer amaranth was observed with the use of adjuvants under field conditions.

Tracer dyes are often utilized as surrogates to characterize pesticide spray drift and it is assumed that they accurately reflect analytical measurement of active ingredients; however, the validity of this assumption remains inconclusive. Consequently, the influence of measurement technique on the magnitude of deposition of spray drift was investigated using spray drift samples evaluated by traditional analytical techniques (HPLC-MS/MS) and fluorimetry (1,3,6,8-pyrene-tetra sulfonic acid tetrasodium salt dye tracer). The experiment was conducted in a low-speed wind tunnel under controlled meteorological conditions. The herbicide mesotrione was sprayed through three spray air induction nozzles (anvil deflector flat fan TTI11004; flat fan AI11004; flat fan AIXR11003). Spray drift deposition samples were collected using stainless steel discs pairs placed side by side in the center of the wind tunnel at distances of 5, 10, 20, 30, and 40 ft (1.5, 3.1, 6.1, 9.1, and 12.2 m) from the spray nozzle. The analytical technique determined pesticide concentration on one disc per pair, and the other was evaluated by fluorimetry. The experimental results, analyzed using the linear split-split plot model, revealed that median deposition concentrations were 15% higher using the tracer dye fluorescence method relative to the analytical method, potentially due in part to procedural recovery inefficiencies of the analytical method (the mean overall procedural recovery result and RSD was 87% ± 6.4% (n=12). This relationship was consistent and held true for the three nozzle types at all distances within the wind tunnel. This article is protected by copyright. All rights reserved.

Off-target drift during pesticide spray applications represents a potential pathway for the introduction of active ingredient into field-adjacent water, soils, and/or vegetation. This study investigated the extent of downwind spray drift deposition of thiamethoxam (as a model insecticide) from an application of Actara® 25WG using standard nozzles (TeeJet XR11003, DG11004, and AIXR11002) onto a fallow field test site in the Midwestern USA. Single broadcast applications at a target rate of 96 g a.i./ha were made uniformly via tractor boom to a mowed stubble plot at a spray volume of 93.5 L/ha. Sampling devices (stainless steel disks, filter paper, and stainless steel rods) were located upwind of the spray swath (as negative control samples), within the spray swath (filter paper only), and downwind (all samplers), perpendicular to the spray swath from 12.5 to 400 ft. (3.8 to 122 m) from the edge of the treated field. Comparison of measured residues from the three types of samplers indicated that filter paper generally had greater variability in results than metal disks. When nozzles were compared, the AIXR11002 air induction nozzle produced less off-field deposition than other nozzles tested. Measured downwind concentrations of thiamethoxam from disk samplers were used to predict distances for mitigating potential effects to honey bees. Based on field-derived models, downwind distances from the spray swath required to reduce exposure levels below levels of concern for honey bees varied from1 ft. to 148 ft. (0.3 to 45 m) depending on the hazard endpoint and nozzle used. These distances were considerably lower than those predicted using the AgDRIFT model, particularly for distances further downwind. At 400 ft. (122 m), AgDRIFT over-predicted the calculated concentrations by up to a factor of 4.8, 7.2, and 10 for DG11004, XR11003, and AIXR11002, respectively. These data suggest that the AgDRIFT model is less reliable for predicting spray deposition at further downwind distances, with implications for risk assessment.

Chloris spp. are warm-season grasses that outcompete crops for scarce resources throughout Australia. In Queensland, mild winters and increased adoption of conservation tillage practices have led to an increase of this warm-season grass family in winter crops. The objective of this study is to understand whether droplet size (nozzle type) effects herbicide efficacy of summer perennial grasses, as previous research found no effect of droplet size (nozzle type) on herbicide efficacy of winter annual grasses. A study to compare droplet-size (nozzle type) effects on control of windmillgrass and its domesticated relative, rhodesgrass, was conducted at the University of Queensland in Gatton, QLD, Australia. Results showed little difference in dry weight reductions for windmillgrass or rhodesgrass across droplet size (nozzle type). Paraquat applications with the TTI nozzle resulted in significantly lower dry weight reductions compared with other droplet-size sprays (nozzle types) for rhodesgrass. Glyphosate, imazamox plus imazapyr, and clodinafop resulted in commercially acceptable control for both species, regardless of the droplet size (nozzle type) selected, indicating droplet size (nozzle type) has relatively little impact on the efficacy of these herbicides. Proper nozzle selection can result in control of Chloris spp., a hard to control weed species, while reducing the occurrence of spray drift to nearby sensitive areas.

While the introduction of herbicide tolerant crops provided growers new options to manage weeds, the widespread adoption of these herbicides increased the risk for herbicide spray drift to surrounding vegetation. The impact of herbicide drift in sensitive crops is extensively investigated, whereas scarce information is available on the consequences of herbicide drift in non-target plants. Weeds are often abundant in field margins and ditches surrounding agricultural landscapes. Repeated herbicide drift exposure to weeds could be detrimental to long-term management as numerous weeds evolved herbicide resistance following recurrent-selection with low herbicide rates. The objective of this study was to evaluate if glyphosate, 2,4-D, and dicamba spray drift could select Amaranthus spp. biotypes with reduced herbicide sensitivity. Palmer amaranth and waterhemp populations were recurrently exposed to herbicide drift in a wind tunnel study over two generations. Seeds from survival plants were used for the subsequent rounds of herbicide drift exposure. Progenies were subjected to herbicide dose-response studies following drift selection. Herbicide drift exposure rapidly selected for Amaranthus spp. biotypes with reduced herbicide sensitivity over two generations. Weed management programs should consider strategies to mitigate near-field spray drift and suppress the establishment of resistance-prone weeds on field borders and ditches in agricultural landscapes.

It is well established that soybean that does not contain the dicamba-resistant (DR) trait is highly sensitive to off-target exposure to dicamba. However, there is limited information on the effect of low doses of dicamba plus glyphosate mixtures on dicamba-sensitive soybean—a mixture likely to be used on a vast acreage of dicamba/glyphosate-resistant soybean. The objective of this research was to examine leaf and pod malformation, along with height and yield effects, when dicamba, glyphosate, or a mixture of the two was applied to soybean sensitive to both dicamba and glyphosate at sublethal doses. Field applications were made at three growth stages (R1, R3, and R5) at multiple locations. Two glyphosate rates (1/64 and 1/256 of the labeled rate of 870 g ae ha−1) and two dicamba rates (1/64 and 1/256 of the labeled rate of 560 g ae ha−1) were used. Adding glyphosate to dicamba increased leaf malformation by 6% more than dicamba alone when applied at the R1 soybean growth stage. After R3 applications, pod malformation was 10% greater in treatments containing dicamba and glyphosate than dicamba alone. Applications at R5 showed minimal leaf and pod malformation. Seed from field trials was planted in the greenhouse to evaluate the offspring. The number of offspring plants showing dicamba-like symptomology was not increased with the addition of glyphosate to dicamba. Overall, injury to offspring was similar in dicamba alone and dicamba plus glyphosate treatments; however, the number of plants injured increased when parent plants were exposed to sublethal doses of dicamba at R3 and R5 compared with R1 growth-stage exposure. Vigor was reduced in dicamba-containing treatments, but not glyphosate-alone treatments. Glyphosate addition to dicamba had no effect on vigor of soybean offspring. Although there is increased injury to parent plants when glyphosate is added to dicamba, this research demonstrates that glyphosate does not contribute to the negative effects of dicamba on soybean offspring.

A field study was conducted in 2015 and 2016 to compare particle drift of glyphosate using a fluorescent tracer dye applied with hooded and open sprayers at four spray qualities (Fine [F], Medium [M], Very-Coarse [VC], and Ultra-Coarse [UC]). F and M spray qualities exhibited up to 86% and 56% less drift, respectively, out to 31 m downwind with the hooded sprayer than with the open sprayer. Conversely, VC and UC spray qualities were not affected by sprayer type out to 31 m downwind. From 43 to 104 m downwind, hooded sprayer applications exhibited approximately 50% less drift than open sprayer applications, regardless of spray quality. From 43 to 89 m downwind, F spray qualities, regardless of sprayer type, exhibited higher drift than all other spray qualities. These data indicate that hooded sprayers considerably reduce drift of all spray qualities at short distances downwind. Additionally, at longer distances downwind, both larger spray qualities and sprayer hoods reduced drift independently.

Recent advances in biotechnology have resulted in crops that are tolerant to the synthetic auxin 2,4-D, expanding the weed management versatility of this herbicide. With potential expansions of use, concerns have been raised about the increased risk of herbicide drift, leading to damage to nontarget crops. A field-scale study was conducted with the objective to measure drift deposition and the potential for drift reduction conferred by a proprietary pre-mixture formulation of 2,4-D choline salt plus glyphosate dimethylammonium salt compared to an in-tank mixture of 2,4-D dimethylamine salt plus glyphosate potassium salt. Treatments were made with field-scale spray equipment under typical application conditions in McCook, NE, using three widely used nozzle tips. Deposition was captured in triplicate downwind collector lines and assayed for tracer dye and 2,4-D. In comparison to the in-tank mixture, the pre-mixture formulation exhibited lower downwind depositions when applied through a flat-fan (TeeJet Extended Range; XR) and air induction (TeeJet Air Induction Extended Range; AIXR) nozzles, but not with a pre-orifice (TeeJet TurboTeeJet Induction; TTI) nozzle. Based upon median deposition at 30 m downwind, the pre-mixture formulation reduced drift by 62% and 91%, for the XR and AIXR nozzles, respectively. From a drift reduction perspective, the pre-mixture formulation performance with the AIXR nozzle was equivalent to a much coarser TTI nozzle while still offering sufficient foliar coverage for acceptable weed control.

Field experiments were conducted in 2014 and 2015 to evaluate the influence of droplet size on foliar fungicide efficacy and leaf residue in soybean infected with Cercospora sojina, the fungal agent of frogeye leaf spot. A fungicide premix of azoxystrobin and difenoconazole was applied using two spray nozzles with varying droplet spectra. No significant differences were found among treatments in regards to visual disease ratings, soybean yield, and azoxystrobin leaf residue at 0, 2, 7, and 14 days after application. Results suggest that the potential reduction in coverage from drift-reduction nozzle technology may not negatively affect the efficacy of a tank mix of azoxystrobin and difenoconazole on frogeye leaf spot in soybean.

In Australia, winter annual grasses provide the strongest competition against wheat for resources which detrimentally affects grain yield. With increasing action from government, industry, and grower groups to reduce herbicide spray drift, adoption of drift reduction technologies (DRTs) especially DRT nozzles has increased over recent years. Some herbicides are less effective when sprays are too coarse as droplets may not be retained on target weed surfaces or not intercepted by target leaves. This is particularly an issue with winter annual grasses, whose small, narrow leaves and ability to grow within the wheat canopy makes their control more difficult. This study sought to understand the effect of droplet size on herbicide efficacy by evaluating the effect of six nozzles, five of which have DRT features across six different herbicides (amitrole, clodinafop, glyphosate, imazamox plus imazapyr, metribuzin, and paraquat) for the control of four winter annual grasses (annual ryegrass, Italian ryegrass, rescuegrass, and tame oats). Plants were grown in pots outdoors on the University of Queensland Gatton campus and were sprayed at 28 days after emergence in August and repeated in October 2015. Results from this study indicate DRT nozzles that produce sprays classified as Ultra-Coarse (>650 μm Dv0.5) can preserve efficacy for some herbicides. Differences were not observed for herbicide efficacy of clodinafop, imazamox plus imazapyr, and glyphosate across both years. Coarse sprays appear to provide the most herbicide efficacy across a wide array of modes of action, and yet reduce spray drift potential compared to finer sprays.