Search

Background: As a threat to human health and public health, cadmium (Cd) pollution has received widespread social concern. Our previously constructed CadR-based bacterial whole cell biosensor (WCB) epCadR5 showed high sensitivity and specificity in cadmium detection. However, the application of the sensor is still hindered by the need for laboratory equipment to read the fluorescence signal output. In this study, we aimed to optimizing the sensor to make it available for visual detection of environmental cadmium and simplify the detection process to advance practical application of the sensor., Results: By replacing the constitutive promoter with J110, the fluorescence signal output of the sensor was significantly increased and the fluorescence leakage was decreased. In addition, the fluorescence signal output of green fluorescence protein (GFP) was enhanced by the addition of a 5' untranslated region (5'-UTR) mlcR10. The fluorescence signal output of the WCB is sufficiently robust to be visible and distinguishable to the naked eye, which is of paramount importance for visual detection. The sensor readout can be conveniently recorded by mobile phone camera and quantified. For ease of on-site application, the WCB's visual detection procedures and conditions were further optimized and simplified. The WCB demonstrated good linearity and detection limit (1.81 μg/L) for visual detection of Cd 2+ without the assistance of bulky laboratory equipment. For the detection of real environmental samples, the WCB visual detection results were close to those of WCB-flow cytometry (FACS) and graphite furnace atomic absorption spectroscopy (GFAAS)., Significance: In this work, we developed an easy-to-use, on-site and visual detection biosensor for monitoring environmental Cd 2+ . It will advance the utilization of cadmium WCBs in practical settings. The optimization and simplification strategy in the study also provide new insights into the visualization of other bacterial biosensors, and will advance the practical application of WCBs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Weak nonspecific interactions between biomacromolecules determine the cytoplasmic organization. Despite their importance, it is challenging to determine these interactions in the intracellular dense and heterogeneous mixture of biomacromolecules. Here, we develop a method to indicate electrostatic and hydrophobic associative interactions and map these interactions. The method relies on a genetically encoded probe containing a sensing peptide and a circularly permuted green fluorescent protein that provides a ratiometric readout. Inside bacterial and mammalian cells, we see that the cytoplasmic components interact strongly with cationic and hydrophobic probes but not with neutral hydrophilic probes, which remain inert. The Escherichia coli cytoplasm interacts strongly with highly negatively charged hydrophilic probes, but the HEK293T cytoplasm does not. These associative interactions are modulated by ATP depletion. Hence, the nonspecific associative interaction profile in cells is condition- and species-dependent.

In 2015, we reported primed conversion, a novel way to convert green-to-red photoconvertible fluorescent proteins, which emerges as a powerful tool for precision optical imaging. Primed conversion uses the intercept of blue and red-to-far-red light instead of traditional violet or near-UV light illumination which offers a series of advantages. Here, we review the fundamental principles and applications of primed conversion with a focus on its use in single-cell labelling and lineage tracing. We provide a historical perspective of lineage tracing techniques, thereby covering basic principles of fluorescence, photoconvertible fluorescent proteins, and eventually primed conversion. We then present the molecular requirements for primed conversion to take place and showcase how it can be used for dual-colour high-fidelity lineage tracing. Further, we discuss potential future developments of the primed conversion imaging toolkit that can benefit the study of both development and disease progression., (© 2023 The Author(s). Journal of Microscopy published by John Wiley & Sons Ltd on behalf of Royal Microscopical Society.)

Nanotexture on biocompatible surfaces promotes cell adhesion and proliferation. High aspect ratio nanoachitecture serves as an ideal interface between implant materials and host cells that is well-suited for localized therapeutic delivery. Despite this potential, nanotextured surfaces have not been widely applied for biomacromolecule delivery. Here, we employed a low-cost, industrially relevant nanoetching process to modify the surface of biocompatible stainless steel 316 (SS316L), creating nanotextured SS316L (NT-SS316L) as a material for intracellular biomacromolecule delivery. As biomacromolecule cargoes are adsorbed to the steel and ultimately would be used in protein-rich environments, we performed serum protein corona analysis on unmodified SS316L and NT-SS316L using tandem mass spectrometry. We observed an increase in proteins associated with cell adhesion on the surface of NT-SS316L compared to that of SS316L, supporting literature reports of enhanced adhesion on nanotextured materials. For delivery to adherent cells, a "hard corona" of model biomacromolecule cargoes including superfolder green fluorescent protein (sfGFP) charge variants, cytochrome c, and siRNA was adsorbed on NT-SS316L to assess delivery. Nanotextured surfaces enhanced cellular biomacromolecule uptake and delivered cytosolic-functional proteins and nucleic acids through energy-dependent endocytosis. Collectively, these findings indicate that NT-SS316L holds potential as a surface modification for implants to achieve localized drug delivery for a variety of biomedical applications.

Although several imaging strategies for dual fluorescence (or Förster) resonance energy transfer (FRET) biosensors have been reported, their implementation is challenging because of the limited performance of fluorescent proteins and the spectral overlap of FRET biosensors. These processes often require additional data calibration to eliminate artifacts. Many CFP/YFP FRET biosensors have been developed. In this study, we introduced the mKate3/HT7(JFX650) FRET pair, which effectively formed two pairs of FRET pairs for dual-FRET imaging when combined with the CFP/YFP FRET pair. The FRET donor mKate3 exhibited higher brightness than its predecessor mKate. The FRET acceptor, HT7(JFX650), is a HaloTag7 protein covalently conjugated with a far-red JFX650-THL ligand. The pair comprising mKate3 and HT7(JFX650) represents an excellent FRET dyad, exhibiting a high FRET efficiency ratio. To use the FRET pair for dual FRET biosensor imaging, we constructed PKA and K + biosensors based on the mKate3/HT7(JFX650) FRET pair. These biosensors can be used along with CFP/YFP biosensors to simultaneously detect the responses of intracellular PKA/Src, PKA/Ca 2+ , and K + /Ca 2+ under different stimuli. The findings revealed that dual FRET biosensors, which are based on the combination of CFP/YFP and mKate3/HT7 (JFX650), exhibit adequate compatibility and can be used to visualize multiple molecular activities in a live cell.

Genetically encoded green fluorescent protein (GFP) and its brighter and redder variants have tremendously revolutionized modern molecular biology and life science by enabling direct visualization of gene regulated protein functions on microscopic and nanoscopic scales. However, the current fluorescent proteins (FPs) only emit a few colors with an emission width of about 30-50 nm. Here, we engineer novel vibrational proteins (VPs) that undergo much finer vibrational transitions and emit rather narrow vibrational spectra (0.1-0.3 nm, roughly 3-10 cm -1 ). In response to an amber stop codon (UAG), a terminal alkyne bearing an unnatural amino acid (UAA, p EtF) is directly incorporated in place of Tyr64 in the chromophore of pr-Kaede by genetic code expansion. Essentially, the UAA64 further conjugates into a large π system with the contiguous two editable amino acid residues (His63 and Gly65), resulting in a programmable Raman resonance shift of the embedded alkyne. In the proof-of-concept experiment, we constructed a series of novel p EtF-VP mutants and observed fine Raman shifts of the alkynyl group in different chromophores. The genetically encoded novel VPs, could potentially label tens of proteins in the future.

Biomacromolecules are viewed as promising drugs due to their specific functions in biological processes, biocompatibility, and pharmacological efficacy. Injective administration, chosen to avoid intestinal barriers, may in turn lead to immediate decay in the circulation system, unreliable targeting performance, or the induction of immune responses. For some biomacromolecules, chemically modified proteins have been developed for practical use. Various cargo or carrier systems are under development but have been delayed by technical difficulties. We present self-assembled nanocapsules with diameters ranging from 100 to 500 nm that can be deployed in physiological buffers to enclose various substances present in the buffers at the same time. Our amphiphilic nanocapsule, consisting of silole-core dendrimer products as the hydrophobic part and green fluorescent protein (GFP) derivatives as the hydrophilic part, connects and assembles spontaneously when mixed in solutions while engulfing dissolved or dispersed compounds together in a dose-dependent manner and shows unique optical characteristics because the dendrimer products exhibit aggregation-induced emission. Furthermore, the emission of the dendrimer causes considerable fluorescence resonance energy transfer (FRET) to GFP derivatives upon association. We could easily monitor assemblies by FRET states and particle sizes and have confirmed a stable presence in the buffer for at least a month. Further tracking of nanocapsules by fluorescence confirmed efficient uptake into some cancer cells. Nanocapsules based on GFP variants with or without a cell-surface-specific tag demonstrated that the tag improved the potential for specific targeted delivery. There were also indications that the nanocapsules became unstable after cellular uptake in the intracellular environment. We report here the simple preparation of traceable, stable, and biocompatible self-assembled nanocapsules as the basis for a versatile drug delivery system.

This study aims to develop an efficient chitin-based purification system, leveraging a novel design where the target proteins, superfolding green fluorescent protein (sfGFP) and Thermus antranikianii trehalose synthase (TaTS), fused with a chitin-binding domain (ChBD) from Bacillus circulans WL-12 chitinase A1 and a tobacco etch virus protease (TEVp) cleavage site. This configuration allows for the effective immobilization of the target proteins on chitin beads, facilitating the removal of endogenous proteins. A mutant TEVp, H-TEVS219V-ChBD, fused with the His-tag and ChBD, is employed to cleave the target proteins from the chitin beads specifically. Subsequently, fresh chitin beads are added for adsorption to remove H-TEVS219V-ChBD in the solution, thereby significantly improving the purity of the target protein. Our results confirm that this system can efficiently and specifically purify and recover sfGFP and TaTS, achieving electrophoretic-grade purity exceeding 90%. This system holds significant potential for industrial production and other applications.

Utilizing ultrasound as an external stimulus to remotely modulate the activity of proteins is an important aspect of sonopharmacology and establishes the basis for the emerging field of sonogenetics. Here, we describe an ultrasound-responsive protein splicing system that enables spatiotemporal control of split-intein-mediated protein ligation. The system utilizes engineered split inteins that are caged and can be activated by thrombin released from a high molar mass DNA-based carrier under focused ultrasound sonication. This approach represents a general method for controlling the functions of proteins of interest by ultrasound, as demonstrated here by the controlled synthesis of the superfolder green fluorescence protein (GFP) and calcitonin. Furthermore, calcitonin receptor-mediated signal transduction in cells was triggered by this system in vitro without harming cell viability. By expanding the sonogenetic toolbox with protein splicing technologies, this study provides a possible pathway to deploy ultrasound for remotely controlling a variety of protein functions in deep tissue in the future.

The leave-one-out (LOO) green fluorescent protein (GFP) approach to biosensor design combines computational protein design with split protein reconstitution. LOO-GFPs reversibly fold and gain fluorescence upon encountering the target peptide, which can be redefined by computational design of the LOO site. Such an approach can be used to create reusable biosensors for the early detection of emerging biological threats. Enlightening biophysical inferences for nine LOO-GFP biosensor libraries are presented, with target sequences from dengue, influenza, or HIV, replacing beta strands 7, 8, or 11. An initially low hit rate was traced to components of the energy function, manifesting in the over-rewarding of over-tight side chain packing. Also, screening by colony picking required a low library complexity, but designing a biosensor against a peptide of at least 12 residues requires a high-complexity library. This double-bind was solved using a "piecemeal" iterative design strategy. Also, designed LOO-GFPs fluoresced in the unbound state due to unwanted dimerization, but this was solved by fusing a fully functional prototype LOO-GFP to a fiber-forming protein, Drosophila ultrabithorax, creating a biosensor fiber. One influenza hemagglutinin biosensor is characterized here in detail, showing a shifted excitation/emission spectrum, a micromolar affinity for the target peptide, and an unexpected photo-switching ability.

Green fluorescent protein (GFP) is widely utilized as a fluorescent tag in biochemical fields. Whereas the intermediate (I) state has been proposed in the photoreaction cycle in addition to the A and B states, until now the structure of I has only been estimated by computational studies. In this paper, we report the crystal structures of the I stabilizing variants of GFP at high resolutions where respective atoms can be observed separately. Comparison with the structures in the other states highlights the structural feature of the I state. The side chain of one of the substituted residues, Val203, adopts the gauche- conformation observed for Thr203 in the A state, which is different from the B state. On the other hand, His148 interacts with the chromophore by ordinary hydrogen bonding with a distance of 2.85 Å, while the weaker interaction by longer distances is observed in the A state. Therefore, it was indicated that it is possible to distinguish three states A, B and I by the two hydrogen bond distances Oγ-Thr203···Oη-chromophore and Nδ1-His148···Oη-chromophore. We discuss the characteristics of the I intermediate of wild-type GFP on the bases of the structure estimated from the variant structures by quantum chemical calculations., (© 2024. The Author(s).)

Enhancing protein stability is pivotal in the field of protein engineering. Protein self-cyclization using peptide a tagging system has emerged as an effective strategy for augmenting the thermostability of target proteins. In this study, we utilized a novel peptide tagging system, ReverseTag/ReverseCatcher, which leverages intramolecular ester bond formation. Initially, we employed GFP as a model to validate the feasibility of cyclization mediated by ReverseTag/ReverseCatcher in improving the protein thermostability. Cyclized GFP (cGFP) retained 30 % of its relative fluorescence after a 30-min incubation at 100 °C, while both GFP and linear GFP (lGFP) completely lost their fluorescence within 5 min. Additionally, we applied this method to exo-inulinase (EXINU), resulting in a variant named cyclized EXINU (cEXINU). The T 50 and t 1/2 values of cEXINU exhibited significant enhancements of 10 °C and 10 min, respectively, compared to EXINU. Furthermore, post-cyclization, EXINU demonstrated a broad operational pH range from 5 to 10 with sustained catalytic activity, and cEXINU maintained a half-life of 960 min at pH 5 and 9. Molecular dynamics simulations were conducted to elucidate the mechanisms underlying the enhanced thermostability and pH robustness of EXINU following cyclization. This study highlights that cyclization substanitially enhances the stability of both highly stable protein GFP and low-stable protein EXINU, mediated by the ReverseTag/ReverseCatcher tagging system. The ReverseTag/ReverseCatcher tagging system proves to be a potent conjugation method, with potential applications in improving thermostability, pH robustness, and other areas of protein engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Green fluorescent protein (GFP) has opened vast new avenues in studies of live cells and is generally perceived as a benign, nontoxic and harmless fluorescent tag. We demonstrat that excited GFP is capable of inducing substantial DNA damage in cells expressing fusion proteins. In the presence of GFP, even low doses of blue light (12 μJ) induce single strand breaks (SSBs). When the fluorescence of GFP located in the cell nucleus or in the cytoplasm is excited by a much higher dose (17 mJ), DNA double-strand breaks (DSBs) are also induced. Such breaks are induced even when GFP is placed and illuminated in culture medium outside of living cells. We demonstrate that DNA damage is induced by singlet oxygen, which is generated by excited GFP. Although short exposures of live cells to exciting light typically used in fluorescence microscopy induce SSBs but carry little risk of inducing DNA double-strand breaks, larger doses, which may be used in FRAP, FLIM, FCS and super-resolution fluorescence microscopy studies, are capable of inducing not only numerous SSBs but also DSBs., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Protein bioconjugation has emerged as one of the most valuable tools for the development of protein-based biochemical assays. Herein, we report a fluorescent macromolecular probe RF12_POI, in which the coumarin derivative RF12 is specifically conjugated onto the HaloTag fused protein of interest (POI) to achieve a dual stimuli-mediated fluorescence response. RF12 is first obtained by installing a photo-cleavable 1-ethyl-2-nitrobenzyl group onto the C7 hydroxy moiety of coumarin fluorophore with a HaloTag ligand attaching to the acid-labile 1,3-dioxane moiety. Upon stimulation, RF12_Halo exhibits a sequential fluorescence response to photon/H + on both liquid and solid interfaces. Through the conjugation of RF12 onto the GFP_Halo protein, RF12_GFP_Halo presents a fluorescence resonance energy transfer (FRET) from photo-cleaved RF12 to GFP in the protein complex. Furthermore, by utilizing the stimuli-responsive fluorescence characteristics of coumarin derivatives RF12 (photon/H + ) and RF16 (H 2 O 2 /H + ), we construct RF12/RF16_POI based protein films and achieve multiple applications of logic circuits, including AND, OR, XOR, INHIBIT, Half-adder or Half-subtractor. In these circuits, the output value of I/I 0 is dependent on the input sequence of photon, H 2 O 2 , and H + . Additionally, we evaluate the fluorescence labeling ability of RF12 to intracellular IRE1_Halo protein and demonstrate that RF12 containing the HaloTag ligand could be precisely retained in cells to track IRE1_Halo protein. Hence, we provide a unique structural design strategy to construct fluorescence dual-responsive macromolecules for information encryption and cellular protein visualization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In situ patterning of biomolecules and living organisms while retaining their biological activity is extremely challenging, primarily because such patterning typically involves thermal stresses that could be substantially higher than the physiological thermal or stress tolerance level. Top-down patterning approaches are especially prone to these issues, while bottom-up approaches suffer from a lack of control in developing defined structures and the time required for patterning. A microbubble generated and manipulated by optical tweezers (microbubble lithography) is used to self-assemble and pattern living organisms in continuous microscopic structures in real-time, where the material thus patterned remains biologically active due to their ability to withstand elevated temperatures for short exposures. Successful patterns of microorganisms (Escherichia coli, Lactococcus. lactis and the Type A influenza virus) are demonstrated, as well as reporter proteins such as green fluorescent protein (GFP) on functionalized substrates with high signal-to-noise ratio and selectivity. Together, the data presented herein may open up fascinating possibilities in rapid in situ parallelized diagnostics of multiple pathogens and bioelectronics., (© 2024 Wiley‐VCH GmbH.)

Galectin-8 is a small soluble lectin with two carbohydrate recognition domains (CRDs). N- and C-terminal CRDs of Gal-8 differ in their specificity for glycan ligands. Here, we wanted to find out whether oligomerization of individual CRDs of galectin-8 affects its biological activity. Using green fluorescent protein polygons (GFPp) as an oligomerization scaffold, we generated intrinsically fluorescent CRDs with altered valency. We show that oligomers of C-CRD are characterized by significant cell surface affinity. Furthermore, the multivalency of the resulting variants has an impact on cellular activities such as cell signaling, heparin binding and proliferation. Our data indicates that tunable valence is a useful tool for modifying the biological activity of CRDs of galectins., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Opalinski reports financial support was provided by National Science Centre Poland. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Rationale: mRNA technology has begun to play a significant role in the areas of therapeutic intervention and vaccine development. However, optimizing the mRNA sequence that influences protein expression levels is a resource-intensive and time-consuming process. This study introduces a new method to accelerate the selection of sequences of mRNA for optimal protein expression., Methods: We designed the mRNA sequences in such a way that a unique peptide barcode, corresponding to each mRNA sequence, is attached to the expressed protein. These barcodes, cleaved off by a protease and simultaneously quantified by mass spectrometry, reflect the protein expression, enabling a parallel analysis. We validated this method using two mRNAs, each with different untranslated regions (UTRs) but encoding enhanced green fluorescence protein (eGFP), and investigated whether the peptide barcodes could analyze the differential eGFP expression levels., Results: The fluorescence intensity of eGFP, a marker of its expression level, has shown noticeable changes between the two UTR sequences in mRNA-transfected cells when measured using flow cytometry. This suggests alterations in the expression level of eGFP due to the influence of different UTR sequences. Furthermore, the quantified amount of peptide barcodes that were released from eGFP showed consistent patterns with these changes., Conclusions: The experimental findings suggest that peptide barcodes serve as a valuable tool for assessing protein expression levels. The process of mRNA sequence selection, aimed at maximizing protein expression, can be enhanced by the parallel analysis of peptide barcodes using mass spectrometry., (© 2024 John Wiley & Sons Ltd.)

Fluorescent protein-based pH biosensors enable the tracking of pH changes during protein trafficking and, in particular, exocytosis. The recent development of chemogenetic reporters combining synthetic fluorophores with self-labeling protein tags offers a versatile alternative to fluorescent proteins that combines the diversity of chemical probes and indicators with the selectivity of the genetic encoding. However, this hybrid protein labeling strategy does not avoid common drawbacks of organic fluorophores such as the risk of off-target signal due to unbound molecules. Here, we describe a novel fluorogenic and chemogenetic pH sensor based on a cell-permeable molecular pH indicator called pHluo-Halo-1 , whose fluorescence can be locally activated in cells by reaction with HaloTag, ensuring excellent signal selectivity in wash-free imaging experiments. pHluo-Halo-1 was selected out of a series of four fluorogenic molecular rotor structures based on protein chromophore analogues. It displays good pH sensitivity with a p K a of 6.3 well-suited to monitor pH variations during exocytosis and an excellent labeling selectivity in cells. It was applied to follow the secretion of CD63-HaloTag fusion proteins using TIRF microscopy. We anticipate that this strategy based on the combination of a tunable and chemically accessible fluorogenic probe with a well-established protein tag will open new possibilities for the development of versatile alternatives to fluorescent proteins for elucidating the dynamics and regulatory mechanisms of proteins in living cells.

Finding a unified fluorescence mechanism is essential to develop and utilize fluorescent proteins appropriately. Here, we report the unified role of the 145th residue on the fluorescence efficiency of fluorescent proteins developed from the jellyfish Aequorea victoria by demonstrating the difference and similarity between two representative fluorescent proteins, enhanced green fluorescent protein (eGFP), and enhanced yellow fluorescent protein (eYFP). We determined the fluorescence lifetimes of the 19 different Y145 mutants of eGFP and eYFP by picosecond time-resolved fluorescence spectroscopy. We found that the effect of the 145th mutation on the fluorescence lifetime is significant for eYFP but moderate for eGFP. We compared known crystal structures to clarify the observed difference between eGFP and eYFP. As a result, we conclude that the efficiency of the steric restriction of the chromophore motion by the 145th side chain is essentially the same for both eGFP and eYFP. Meanwhile, the restriction of the chromophore motion by hydrogen bonds is more pronounced for eGFP than for YFP. Balance of the steric effect and hydrogen bonding controls the lifetime of the Y145 mutants for eGFP and eYFP. Furthermore, the steric restriction is induced by the electrostatic effect; the different 145th residue induces a different electrostatic environment around the chromophore. The finding in this study reasonably explains the reported lifetimes of other fluorescent proteins and allows the prediction of the lifetime of unknown fluorescent proteins from jellyfish.

Artificial intelligence-based protein structure prediction methods such as AlphaFold2 have emerged as powerful tools for characterizing proteins sequence-structure relationship offering unprecedented opportunities for the molecular interpretation of biological and biochemical phenomena. While initially confined to providing a static representation of proteins through their global free-energy minimum, AlphaFold2 has demonstrated the ability to partially sample conformational landscapes, providing insights into protein dynamics, which is fundamental for interpreting and potentially tuning the function of natural and artificial proteins. In this study, we show that targeted column masking of AlphaFold2's multiple sequence alignment enables the characterization and estimation of the population ratio of the two main conformations of engineered green fluorescent proteins with alternative β-strands. The possibility of quickly estimating relative populations through AlphaFold2 predictions is expected to speed-up the computational design of related systems for sensing applications.

Friction to translational diffusion of ionic particles in polar liquids should scale linearly with the squared ion charge, according to standard theories. Substantial slowing of translational diffusion is expected for proteins in water. In contrast, our simulations of charge mutants of green fluorescent proteins in water show remarkable insensitivity of the translational diffusion constant to protein's charge in the range of charges between -29 and +35. The friction coefficient is given as a product of the force variance and the memory function relaxation time. We find remarkably accurate equality between the variance of the electrostatic force and the negative cross-correlation of the electrostatic and van der Waals forces. The charge invariance of the diffusion constant is a combined effect of the force variance and relaxation time invariances with the protein charge. The temperature dependence of the protein diffusion constant is highly non-Arrhenius, with a fragile-to-strong crossover at the glass transition.

Crystal polymorphism serves as a strategy to study the conformational flexibility of proteins. However, the relationship between protein crystal packing and protein conformation often remains elusive. In this study, two distinct crystal forms of a green fluorescent protein variant, NowGFP, are compared: a previously identified monoclinic form (space group C2) and a newly discovered orthorhombic form (space group P2 1 2 1 2 1 ). Comparative analysis reveals that both crystal forms exhibit nearly identical linear assemblies of NowGFP molecules interconnected through similar crystal contacts. However, a notable difference lies in the stacking of these assemblies: parallel in the monoclinic form and perpendicular in the orthorhombic form. This distinct mode of stacking leads to different crystal contacts and induces structural alteration in one of the two molecules within the asymmetric unit of the orthorhombic crystal form. This new conformational state captured by orthorhombic crystal packing exhibits two unique features: a conformational shift of the β-barrel scaffold and a restriction of pH-dependent shifts of the key residue Lys61, which is crucial for the pH-dependent spectral shift of this protein. These findings demonstrate a clear connection between crystal packing and alternative conformational states of proteins, providing insights into how structural variations influence the function of fluorescent proteins., (open access.)

Green fluorescent protein has long been a favorite protein for demonstrating protein purification in the biochemistry lab course. The protein's vivid green color helps demonstrate to students the concept(s) behind affinity or ion exchange chromatography. We designed a series of introduction to biochemistry labs utilizing a thermostable green protein (TGP-E) engineered to have unusually high thermostability. This protein allows students to proceed through purification and characterization without the need to keep protein samples on ice. The 5-week lab series begins with an introduction to molecular biology techniques during weeks 1 and 2, where site-directed mutagenesis is used introduce, a single nucleotide change that shifts the fluorescent spectra of TGP-E to either cyan (CTP-E) or yellow (YTP-E). Students identify successful mutagenesis reaction by the color of a small expression sample after induction with IPTG. Next, students purify either the TGP-E (control-typically one group volunteers), YTP-E, or CTP-E protein as a 1-week lab. During the following week's lab, students run SDS-PAGE to verify protein purity, bicinchoninic acid assay to quantify protein yield, and absorbance and fluorescence spectra to characterize their protein's fluorescent character. The final lab in the series investigates the thermostability of YTP-E and CTP-E compared with TGP-E using a fluorescence plate reader. This 5-week series of experiments provide students with experience in several key biochemistry techniques and allows the students to compare properties of mutations. At the end of the course, the students will write a research report and give a short presentation over their results., (© 2024 International Union of Biochemistry and Molecular Biology.)

Significance: Hyperspectral imaging (HSI) of murine tumor models grown in dorsal skinfold window chambers (DSWCs) offers invaluable insight into the tumor microenvironment. However, light loss in a glass coverslip is often overlooked, and particular tissue characteristics are improperly modeled, leading to errors in tissue properties extracted from hyperspectral images., Aim: We highlight the significance of spectral renormalization in HSI of DSWC models and demonstrate the benefit of incorporating enhanced green fluorescent protein (EGFP) excitation and emission in the skin tissue model for tumors expressing genes to produce EGFP., Approach: We employed an HSI system for intravital imaging of mice with 4T1 mammary carcinoma in a DSWC over 14 days. We performed spectral renormalization of hyperspectral images based on the measured reflectance spectra of glass coverslips and utilized an inverse adding-doubling (IAD) algorithm with a two-layer murine skin model, to extract tissue parameters, such as total hemoglobin concentration and tissue oxygenation ( StO 2 ). The model was upgraded to consider EGFP fluorescence excitation and emission. Moreover, we conducted additional experiments involving tissue phantoms, human forearm skin imaging, and numerical simulations., Results: Hyperspectral image renormalization and the addition of EGFP fluorescence in the murine skin model reduced the mean absolute percentage errors (MAPEs) of fitted and measured spectra by up to 10% in tissue phantoms, 0.55% to 1.5% in the human forearm experiment and numerical simulations, and up to 0.7% in 4T1 tumors. Similarly, the MAPEs for tissue parameters extracted by IAD were reduced by up to 3% in human forearms and numerical simulations. For some parameters, statistically significant differences ( p < 0.05 ) were observed in 4T1 tumors. Ultimately, we have shown that fluorescence emission could be helpful for 4T1 tumor segmentation., Conclusions: The results contribute to improving intravital monitoring of DWSC models using HSI and pave the way for more accurate and precise quantitative imaging., (© 2024 The Authors.)

Achieving effective intracellular delivery of therapeutic molecules such as antibodies (IgG) is a challenge in biomedical research and pharmaceutical development. Conjugation of IgG with a cell-penetrating peptide is a rational approach. Here, not only the efficacy of the conjugates in internalizing into cells, but also the physicochemical property of the conjugates allowing their solubilized states in solution without forming aggregates are critical. In this study, we have shown that the first requirement can be addressed using a cell-permeable attenuated cationic amphiphilic lytic (CP-ACAL) peptide, L17ER4. The second requirement can be addressed by ligation of IgG to L17ER4 using sortase A, where the use of a linker of appropriate chain length is also important. For evaluation, the intracellular delivery efficacy was studied using conjugate structures with different orientations and conjugation modes of L17ER4 in ligation to a model protein, green fluorescent protein fused to a nuclear localization signal (NLS-EGFP). The effect of tetraarginine positioning in the L17ER4 sequence was also investigated. Following these studies, an optimized peptide sequence containing L17ER4 was ligated to an anti-green fluorescent protein (GFP) IgG bearing a sortase A recognition sequence. Treatment of the cells with the conjugate of anti-GFP IgG and L17ER4 resulted in a high efficiency of cytosolic translocation of the conjugate and the binding to the target protein in the cell without significant aggregate formation. The feasibility of the d-form of L17ER4 as a CP-ACAL was also confirmed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Nanobodies are single-variable domain antibodies with excellent properties, which are evolving as versatile tools to guide cognate antigens in vitro and in vivo for biological research, diagnosis, and treatment. Given their simple structure, nanobodies are readily produced in multiple systems. However, selecting an appropriate expression system is crucial because different conditions might cause proteins to produce different folds or post-translational modifications (PTMs), and these differences often result in different functions. At present, the strategies of PTMs are rarely reported. The GFP nanobody can specifically target the GFP protein. Here, we engineered a GFP nanobody fused with 6 × His tag and Fc tag, respectively, and expressed in bacteria and mammalian cells. The 6 × His-GFP-nanobody was produced from Escherichia coli at high yields and the pull-down assay indicated that it can precipitate the GFP protein. Meanwhile, the Fc-GFP-nanobody can be expressed in HEK293T cells, and the co-immunoprecipitation experiment can trace and target the GFP-tagged protein in vivo. Furthermore, some different PTMs in antigen-binding regions have been identified after using mass spectrometry (MS) to analyze the GFP nanobodies, which are expressed in prokaryotes and eukaryotes. In this study, a GFP nanobody was designed, and its binding ability was verified by using the eukaryotic and prokaryotic protein expression systems. In addition, this GFP nanobody was transformed into a useful instrument for more in-depth functional investigations of GFP fusion proteins. MS was further used to explore the reason for the difference in binding ability, providing a novel perspective for the study of GFP nanobodies and protein expression purification., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest. This article does not contain any studies involving humans or animals as experimental objects., (Copyright © 2024. Published by Elsevier Inc.)

Previously, we identified the human annexin A1 as a purification tag for column-free purification with gentler calcium-responsive precipitation. In this work, we used the annexin A1 tagged green fluorescent protein constructs for detecting extracellular production in Escherichia coli, Bacillus subtilis, and Pichia pastoris, and identified that the leaderless fusion protein was transported extracellularly in E. coli with supply of additives including Triton X-100. The coexpressed enzymes, culture compositions, and induction conditions in E. coli extracellular expression systems were optimized. With coexpression of phospholipase C from Bacillus cereus and addition of 0.2 % Triton X-100 after induction for 60 h at 28 °C, the annexin A1 tagged green fluorescent protein and 5-aminolevulinate dehydratase from E. coli were overexpressed and purified from lysogeny broth by precipitation with 20 mM Ca 2+ and redissolution with 25 mM EDTA with the acceptable protein purities and recoveries. The silica binding peptide was fused to the annexin A1 tagged fluorescent protein fusion for successive affinity precipitation and purification. With incubation of the specific protease, the released tag-free protein displayed higher purity via on-resin cleavage than that through cleavage of the free fusion protein. The tandem tag is applicable for two-step purification of small or large amounts of other fusion proteins in the culture and recovery of tag-free proteins at low cost., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Current biological research requires simple protein bioseparation methods capable of purifying target proteins in a single step with high yields and purities. Conventional affinity tag-based approaches require specific affinity resins and expensive proteolytic enzymes for tag removal. Purification strategies based on self-cleaving aggregating tags have been previously developed to address these problems. However, these methods often utilize C-terminal cleaving contiguous inteins which suffer from premature cleavage, resulting in significant product loss during protein expression. In this work, we evaluate two novel mutants of the Mtu RecA ΔI-CM mini-intein obtained through yeast surface display for improved protein purification. When used with the elastin-like-polypeptide (ELP) precipitation tag, the novel mutants - ΔI-12 and ΔI-29 resulted in significantly higher precursor content, product purity and process yield compared to the original Mtu RecA ΔI-CM mini-intein. Product purities ranging from 68 % to 94 % were obtained in a single step for three model proteins - green fluorescent protein (GFP), maltose binding protein (MBP) and beta-galactosidase (beta-gal). Further, high cleaving efficiency was achieved after 5 h under most conditions. Overall, we have developed improved self-cleaving precipitation tags which can be used for purifying a wide range of proteins cheaply at laboratory scale., (Copyright © 2024 Elsevier Inc. All rights reserved.)

While protein aggregation is a hallmark of many neurodegenerative diseases, acquiring structural information on protein aggregates inside live cells remains challenging. Traditional microscopy does not provide structural information on protein systems. Routinely used fluorescent protein tags, such as Green Fluorescent Protein (GFP), might perturb native structures. Here, we report a counter-propagating mid-infrared photothermal imaging approach enabling mapping of secondary structure of protein aggregates in live cells modeling Huntington's disease. By comparing mid-infrared photothermal spectra of label-free and GFP-tagged huntingtin inclusions, we demonstrate that GFP fusions indeed perturb the secondary structure of aggregates. By implementing spectra with small spatial step for dissecting spectral features within sub-micrometer distances, we reveal that huntingtin inclusions partition into a β-sheet-rich core and a ɑ-helix-rich shell. We further demonstrate that this structural partition exists only in cells with the [RNQ + ] prion state, while [rnq - ] cells only carry smaller β-rich non-toxic aggregates. Collectively, our methodology has the potential to unveil detailed structural information on protein assemblies in live cells, enabling high-throughput structural screenings of macromolecular assemblies., (© 2024 Wiley-VCH GmbH.)

Intracellular temperature is a fundamental parameter in biochemical reactions. Genetically encoded fluorescent temperature indicators (GETIs) have been developed to visualize intracellular thermogenesis; however, the temperature sensitivity or localization capability in specific organelles should have been further improved to clearly capture when and where intracellular temperature changes at the subcellular level occur. Here, we developed a new GETI, gMELT, composed of donor and acceptor subunits, in which cyan and yellow fluorescent proteins, respectively, as a Förster resonance energy transfer (FRET) pair were fused with temperature-sensitive domains. The donor and acceptor subunits associated and dissociated in response to temperature changes, altering the FRET efficiency. Consequently, gMELT functioned as a fluorescence ratiometric indicator. Untagged gMELT was expressed in the cytoplasm, whereas versions fused with specific localization signals were targeted to the endoplasmic reticulum (ER) or mitochondria. All gMELT variations enabled more sensitive temperature measurements in cellular compartments than those in previous GETIs. The gMELTs, tagged with ER or mitochondrial targeting sequences, were used to detect thermogenesis in organelles stimulated chemically, a method previously known to induce thermogenesis. The observed temperature changes were comparable to previous reports, assuming that the fluorescence readout changes were exclusively due to temperature variations. Furthermore, we demonstrated how macromolecular crowding influences gMELT fluorescence given that this factor can subtly affect the fluorescence readout. Investigating thermogenesis with gMELT, accounting for factors such as macromolecular crowding, will enhance our understanding of intracellular thermogenesis phenomena.

The advancement of effective nasal mucoadhesive delivery faces challenges due to rapid mucociliary clearance (MCC). Conventional studies have employed mucoadhesive materials, mainly forming spherical nanoparticles, but these offer limited adhesion to the nasal mucosa. This study hypothesizes that a 2D nanoscale structure utilizing adhesive polyphenols can provide a superior strategy for countering MCC, aligning with the planar mucosal layers. We explore the use of tannic acid (TA), a polyphenolic molecule known for its adhesive properties and ability to form complexes with biomolecules. Our study introduces an unprecedented 2D nanopatch, assembled through the interaction of TA with green fluorescent protein (GFP), and cell-penetrating peptide (CPP). This 2D nanopatch demonstrates robust adhesion to nasal mucosa and significantly enhances immunoglobulin A secretions, suggesting its potential for enhancing nasal vaccine delivery. The promise of a polyphenol-enabled adhesive 2D nanopatch signifies a pivotal shift from conventional spherical nanoparticles, opening new pathways for delivery strategies through respiratory mucoadhesion.

Cells crucially rely on the interactions of biomolecules at their plasma membrane to maintain homeostasis. Yet, a methodology to systematically quantify biomolecular organisation, measuring diffusion dynamics and oligomerisation, represents an unmet need. Here, we introduce the brightness-transit statistics (BTS) method based on fluorescence fluctuation spectroscopy and combine information from brightness and transit times to elucidate biomolecular diffusion and oligomerisation in both cell-free in vitro and in vitro systems incorporating living cells. We validate our approach in silico with computer simulations and experimentally using oligomerisation of EGFP tethered to supported lipid bilayers. We apply our pipeline to study the oligomerisation of CD40 ectodomain in vitro and endogenous CD40 on primary B cells. While we find a potential for CD40 to oligomerize in a concentration or ligand depended manner, we do not observe mobile oligomers on B cells. The BTS method combines sensitive analysis, quantification, and intuitive visualisation of dynamic biomolecular organisation., (© 2024. The Author(s).)

Virus-like particles (VLPs) have untapped potential for packaging and delivery of macromolecular cargo. To be a broadly useful platform, there needs to be a strategy for attaching macromolecules to the inside or the outside of the VLP with minimal modification of the platform or cargo. Here, we repurpose antiviral compounds that bind to hepatitis B virus (HBV) capsids to create a chemical tag to noncovalently attach cargo to the VLP. Our tag consists of a capsid assembly modulator, HAP13, connected to a linker terminating in maleimide. Our cargo is a green fluorescent protein (GFP) with a single addressable cysteine, a feature that can be engineered in many proteins. The HAP-GFP construct maintained HAP's intrinsic ability to bind HBV capsids and accelerate assembly. We investigated the capacity of HAP-GFP to coassemble with HBV capsid protein and bind to preassembled capsids. HAP-GFP binding was concentration-dependent, sensitive to capsid stability, and dependent on linker length. Long linkers had the greatest activity to bind capsids, while short linkers impeded assembly and damaged intact capsids. In coassembly reactions, >20 HAP-GFP molecules were presented on the outside and inside of the capsid, concentrating the cargo by more than 100-fold compared to bulk solution. We also tested an HAP-GFP with a cleavable linker so that external GFP molecules could be removed, resulting in exclusive internal packaging. These results demonstrate a generalizable strategy for attaching cargo to a VLP, supporting development of HBV as a modular VLP platform.

A strategy for the bioorthogonal immobilization of proteins onto commercially available filter paper is presented. Recently, a two-step approach has been described that relies on covalent immobilization of a linker molecule to paper, followed by enzyme-mediated conjugation of a protein of interest containing an enzyme-recognition tag. Here, this strategy was expanded by evaluating four different chemical and chemoenzymatic reactions and investigating paper loading efficiency and orthogonality. Enhanced green fluorescent protein (EGFP) was used as a model protein to allow quantification of protein loading via fluorescence imaging. Two approaches were identified that showed significantly increased loading efficiencies compared with the previously applied conjugation strategy. Additionally, all four methods were proven orthogonal to each other, allowing simultaneous immobilization of a mixture of proteins to a premodified assembly of two paper sheets.

Coiled-coil domain-containing 124 protein is a multifunctional RNA-binding factor, and it was previously reported to interact with various biomolecular complexes localized at diverse subcellular locations, such as the ribosome, centrosome, midbody, and nucleoli. We aimed to better characterize the subcellular CCDC124 translocation by labelling this protein with a fluorescent tag, followed by laser scanning confocal microscopy methods. As traditional GFP-tagging of small proteins such as CCDC124 often faces limitations like potential structural perturbations of labeled proteins, and interference of the fluorescent-tag with their endogenous cellular functions, we aimed to label CCDC124 with the smallest possible split-GFP associated protein-tagging system (GFP11/GFP1-10) for better characterization of its subcellular localizations and its translocation dynamics. By recombinant DNA techniques we generated CCDC124-constructs labelled with either single of four tandem copies of GFP11 (GFP11 ×  1 ::CCDC124, GFP11 ×  4 ::CCDC124, or CCDC124::GFP11 ×  4 ). We then cotransfected U2OS cells with these split-GFP constructs (GFP11 ×  1(or X4) ::CCDC124/GFP1-10) and analyzed subcellular localization of CCDC124 protein by laser scanning confocal microscopy. Tagging CCDC124 with four tandem copies of a 16-amino acid short GFP-derived peptide-tag (GFP11  × 4 ::CCDC124) allowed better characterization of the subcellular localization of CCDC124 protein in our model human bone osteosarcoma (U2OS) cells. Thus, by this novel methodology we successfully identified GFP11 ×  4 ::CCDC124 molecules in G3BP1-overexpression induced stress-granules by live cell protein imaging for the first time. Our findings propose CCDC124 as a novel component of the stress granule which is a membraneless organelle involved in translational shut-down in response to cellular stress., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

A DNA cassette assembly method is described which utilizes inexpensive oligomers no longer than 40 nt in length. The five-segment cassettes have 20 nt overlaps which give an effective length of 80 nt, making it possible to code for peptides up to 20 amino acids long. The cassettes have three phosphate free nicks, which can be successfully inserted into plasmid DNA and used to transform E. coli. The nicks are repaired in vivo by an unknown mechanism. Insertions are not successful for cassettes with greater than three nicks. A procedure is provided for rapid turnaround from DNA design to peptides, which are easily isolated as C-terminal fusions with GFP. The technique generally gives the expected sequence, with errors which occur about 1% of the time. Several representative DNA inserts are described which illustrate the method, as well as chemical details on the new peptides coded for. The peptides can be readily mutated to make it possible to understand how polar and aromatic residues affect GFP-fusion solubility, and how histidine residues can be strategically placed in a peptide for good IMAC retention. The method can be used to explore a large number of new designed peptides as fusion products quickly and economically., Competing Interests: The author has declared that no competing interests exist., (Copyright: © 2024 Jonathan Filley. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The ultrafast high-energy nonadiabatic excited-state dynamics of the benzylidenedimethylimidazolinone chromophore dimer has been investigated using an electronic structure method coupled with on-the-fly quantitative wave function analysis to gain insight into the photophysics of hot excitons in biological systems. The dynamical simulation provides a rationalization of the behavior of the exciton in a dimer after the photoabsorption of light to higher-energy states. The results suggest that hot exciton localization within the manifold of excited states is caused by the hindrance of torsional rotation due to imidazolinone (I) or phenolate (P) bonds i.e., Φ I - or Φ P -dihedral rotation, in the monomeric units of a dimer. This hindrance arises due to weak π-π stacking interaction in the dimer, resulting in an energetically uphill excited-state barrier for Φ I - and Φ P -twisted rotation, impeding the isomerization process in the chromophore. Thus, this study highlights the potential impact of the weak π-π interaction in regulating the photodynamics of the green fluorescent protein chromophore derivatives.

Glioma is the most common primary malignant tumor in the brain. The diagnostic accuracy and treatment efficiency of glioma are facing great challenges due to the presence of the blood-brain barrier (BBB) and the high infiltration of glioma. There is an urgent need to explore the combination of diagnostic and therapeutic approaches to achieve a more accurate diagnosis, as well as guidance before and after surgery. In this work, we induced human induction of pluripotent stem cell into neural progenitor cells (NPCs) and synthesized nanoprobes labeled with enhanced green fluorescent protein (EGFP, abbreviated as MFe 3 O 4 -labeled EGFP-NPCs) for photothermal therapy. Nanoprobes carried by NPCs can effectively penetrate the BBB and target glioma for the purpose of magnetic resonance imaging and guiding surgery. More importantly, MFe 3 O 4 -labeled EGFP-NPCs can effectively induce local photothermal therapy, conduct preoperative tumor therapy, and inhibit the recurrence of postoperative glioma. This work shows that MFe 3 O 4 -labeled EGFP-NPCs is a promising nanoplatform for glioma diagnosis, accurate imaging-guided surgery, and effective photothermal therapy.

Vaccines aim to efficiently and specifically activate the immune system via a cascade of antigen uptake, processing, and presentation by antigen-presenting cells (APCs) to CD4 and CD8 T cells, which in turn drive humoral and cellular immune responses. The specific formulation of vaccine carriers can not only shield the antigens from premature sequestering before reaching APCs but also favorably promote intracellular antigen presentation and processing. This study compares two different acid-degradable polymeric nanoparticles that are capable of encapsulating a moderately immunogenic antigen, GFP, at nearly full efficacy via electrostatic interactions or molecular affinity between His tag and Ni-NTA-conjugated monomners. This resulted in GFP-encapsulating NPs composed of ketal monomers and crosslinkers (KMX/GFP NPs) and NTA-conjugated ketal monomers and crosslinkers (NKMX/GFP NPs), respectively. Encapsulated GFP was found to be released more rapidly from NKMX/GFP NPs (electrostatic encapsulation) than from KMX/GFP NPs (affinity-driven encapsulation). In vivo vaccination studies demonstrated that while repeated injections of either NP formulation resulted in poorer generation of anti-GFP antibodies than injections of the GFP antigen itself, sequential injections of NPs and GFP as prime and booster vaccines, respectively, restored the humoral response. We proposed that NPs primarily assist APCs in antigen presentation by T cells, and B cells need to be further stimulated by free protein antigens to produce antibodies. The findings of this study suggest that the immune response can be modulated by varying the chemistry of vaccine carriers and the sequences of vaccination with free antigens and antigen-encapsulating NPs.

Plants are a newly developing eukaryotic expression system being explored to produce therapeutic proteins. Purification of recombinant proteins from plants is one of the most critical steps in the production process. Typically, proteins were purified from total soluble proteins (TSP), and the presence of miscellaneous intracellular proteins and cytochromes poses challenges for subsequent protein purification steps. Moreover, most therapeutic proteins like antigens and antibodies are secreted to obtain proper glycosylation, and the presence of incompletely modified proteins leads to inconsistent antigen or antibody structures. This work introduces a more effective method to obtain highly purified recombinant proteins from the plant apoplastic space. The recombinant Green fluorescent protein (GFP) is engineered to be secreted into the apoplast of Nicotiana benthamiana and is then extracted using an infiltration-centrifugation method. The GFP-His from the extracted apoplast is then purified by nickel affinity chromatography. In contrast to the traditional methods from TSP, purification from the apoplast produces highly purified recombinant proteins. This represents an important technological improvement for plant production systems.

Photoconvertible fluorescent proteins (pcFPs) undergo a slow photochemical transformation when irradiated with blue light. Since their emission is shifted from green to red, pcFPs serve as convenient fusion tags in several cutting-edge biological imaging technologies. Here, a pcFP termed the Least Evolved Ancestor (LEA) was used as a model system to determine the rate-limiting step of photoconversion. Perdeuterated histidine residues were introduced by isotopic enrichment and chromophore content was monitored by absorbance. pH-dependent photoconversion experiments were carried out by exposure to 405-nm light followed by dark equilibration. The loss of green chromophore correlated well with the rise of red, and maximum photoconversion rates were observed at pH 6.5 (0.059 ± 0.001 min -1 for red color acquisition). The loss of green and the rise of red provided deuterium kinetic isotope effects (DKIEs) that were identical within error, 2.9 ± 0.9 and 3.8 ± 0.6, respectively. These data indicate that there is one rate-determining step in the light reactions of photoconversion, and that CH bond cleavage occurs in the transition state of this step. We propose that these reactions are rate-limited on the min time scale by the abstraction of a proton at the His62 beta-carbon. A conformational intermediate such as a twisted or isomerized chromophore is proposed to slowly equilibrate in the dark to generate the red form. Additionally, His62 may shuttle protons to activate Glu211 to serve as a general base, while also facilitating beta-elimination. This idea is supported by a recent X-ray structure of methylated His62., (© 2024 The Protein Society.)

Generating active, pure, and monodisperse protein remains a major bottleneck for structural studies using X-ray crystallography and cryo-electron microscopy (cryo-EM). The current methodology heavily relies on overexpressing the recombinant protein fused with a histidine tag in conventional expression systems and evaluating the quality and stability of purified protein using size exclusion chromatography (SEC). This requires a large amount of protein and can be highly laborious and time consuming. Therefore, this approach is not suitable for high-throughput screening and low-expressing macromolecules, particularly eukaryotic membrane proteins. Using fluorescent proteins fused to the target protein (applicable to both soluble and membrane proteins) enables rapid and efficient screening of expression level and monodispersity of tens of unpurified constructs using fluorescence-based size exclusion chromatography (FSEC). Moreover, FSEC proves valuable for screening multiple detergents to identify the most stabilizing agent in the case of membrane proteins. Additionally, FSEC can facilitate nanodisc reconstitution by determining the optimal ratio of membrane scaffold protein (MSP), lipids, and target protein. The distinct advantages offered by FSEC indicate that fluorescent proteins can serve as a viable alternative to commonly used affinity tags for both characterization and purification purposes. In this review, I will summarize the advantages of this technique using examples from my own work. It should be noted that this article is not intended to provide an exhaustive review of all available literature, but rather to offer representative examples of FSEC applications., (© 2023 Federation of European Biochemical Societies.)

Site-specific installation of non-natural functionality onto proteins has enabled countless applications in biotechnology, chemical biology, and biomaterials science. Though the N-terminus is an attractive derivatization location, prior methodologies targeting this site have suffered from low selectivity, a limited selection of potential chemical modifications, and/or challenges associated with divergent protein purification/modification steps. In this work, we harness the atypically split VidaL intein to simultaneously N-functionalize and purify homogeneous protein populations in a single step. Our method─referred to as VidaL-tagged expression and protein ligation (VEPL)─enables modular and scalable production of N-terminally modified proteins with native bioactivity. Demonstrating its flexibility and ease of use, we employ VEPL to combinatorially install 4 distinct (multi)functional handles (e.g., biotin, alkyne, fluorophores) to the N-terminus of 4 proteins that span three different classes: fluorescent (Enhanced Green Fluorescent Protein, mCherry), enzymatic (β-lactamase), and growth factor (epidermal growth factor). Moving forward, we anticipate that VEPL's ability to rapidly generate and isolate N-modified proteins will prove useful across the growing fields of applied chemical biology.

A viral infection process covers a large range of spatiotemporal scales. Tracking the viral infection process with fluorescent labels over long durations while maintaining a fast sampling rate requires bright and highly photostable labels. StayGold is a recently identified green fluorescent protein that has a greater photostability and higher signal intensity under identical illumination conditions compared to existing fluorescence protein variants. Here, StayGold protein fusions were used to generate virus-like particles (StayGold-VLPs) to achieve hour-long 3D single-virus tracking (SVT) with 1000 localizations per second (kHz sampling rate) in live cells. The expanded photon budget from StayGold protein fusions prolonged the tracking duration, facilitating a comprehensive study of viral trafficking dynamics with high temporal resolution over long time scales. The development of StayGold-VLPs presents a simple and general VLP labeling strategy for better performance in SVT, enabling exponentially more information to be collected from single trajectories and allowing for the future possibility of observing the entire life cycle of a single virus.

An effective, GFP-inspired fluorescent Zn 2+ sensor is developed for two-photon microscopy and related biological application that features an 8-methoxyquinoline moiety. Excellent photophysical characteristics including a 37-fold fluorescence enhancement with excitation and emission maxima at 440 nm and 505 nm, respectively, as well as a high two-photon cross-section of 73 GM at 880 nm are reported. Based on the experimental data, the relationship between the structure and properties was elucidated and explained backed up by DFT calculations, particularly the observed PeT phenomenon for the turn-on process. Biological validation and detailed experimental and theoretical characterization of the free and the zinc-bound compounds are presented., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Fusion proteins (FPs) are frequently utilized as a biotechnological tool in the determination of macromolecular structures using X-ray methods. Here, we explore the use of different protein tags in various FP, to obtain initial phases by using them in a partial molecular replacement (MR) and constructing the remaining FP structure with ARP/wARP. Usually, the tag is removed prior to crystallization, however leaving the tag on may facilitate crystal formation, and structural determination by expanding phases from known to unknown segments of the complex. In this study, the Protein Data Bank was mined for an up-to-date list of FPs with the most used protein tags, Maltose Binding Protein (MBP), Green Fluorescent Protein (GFP), Thioredoxin (TRX), Glutathione transferase (GST) and the Small Ubiquitin-like Modifier Protein (SUMO). Partial MR using the protein tag, followed by automatic model building, was tested on a subset of 116 FP. The efficiency of this method was analyzed and factors that influence the coordinate construction of a substantial portions of the fused protein were identified. Using MBP, GFP, and SUMO as phase generators it was possible to build at least 75 % of the protein of interest in 36 of the 116 cases tested. Our results reveal that tag selection has a significant impact; tags with greater structural stability, such as GFP, increase the success rate. Further statistical analysis identifies that resolution, Wilson B factor, solvent percentage, completeness, multiplicity, protein tag percentage in the FP (considering amino acids), and the linker length play pivotal roles using our approach. In cases where a structural homologous is absent, this method merits inclusion in the toolkit of protein crystallographers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Lipid droplets (LDs) store energy and supply fatty acids and cholesterol. LDs are a hallmark of chronic nonalcoholic fatty liver disease (NAFLD). Recently, studies have focused on the role of hepatic macrophages in NAFLD. Green fluorescent protein (GFP) is used for labeling the characteristic targets in bioimaging analysis. Cx3cr1 -GFP mice are widely used in studying the liver macrophages such as the NAFLD model. Here, we have developed a tool for two-photon microscopic observation to study the interactions between LDs labeled with LD2 and liver capsule macrophages labeled with GFP in vivo. LD2 , a small-molecule two-photon excitation fluorescent probe for LDs, exhibits deep-red (700 nm) fluorescence upon excitation at 880 nm, high cell staining ability and photostability, and low cytotoxicity. This probe can clearly observe LDs through two-photon microscopy (TPM) and enables the simultaneous imaging of GFP + liver capsule macrophages (LCMs) in vivo in the liver capsule of Cx3cr1 -GFP mice. In the NAFLD mouse model, Cx3cr1 + LCMs and LDs increased with the progress of fatty liver disease, and spatiotemporal changes in LCMs were observed through intravital 3D TPM images. LD2 will aid in studying the interactions and immunological roles of hepatic macrophages and LDs to better understand NAFLD.

Secondary amines, due to their reactivity, can transform protein templates into catalytically active entities, accelerating the development of artificial enzymes. However, existing methods, predominantly reliant on modified ligands or N-terminal prolines, impose significant limitations on template selection. In this study, genetic code expansion was used to break this boundary, enabling secondary amines to be incorporated into alternative proteins and positions of choice. Pyrrolysine analogues carrying different secondary amines could be incorporated into superfolder green fluorescent protein (sfGFP), multidrug-binding LmrR and nucleotide-binding dihydrofolate reductase (DHFR). Notably, the analogue containing a D-proline moiety demonstrated both proteolytic stability and catalytic activity, conferring LmrR and DHFR with the desired transfer hydrogenation activity. While the LmrR variants were confined to the biomimetic 1-benzyl-1,4-dihydronicotinamide (BNAH) as the hydride source, the optimal DHFR variant favorably used the pro-R hydride from NADPH for stereoselective reactions (e.r. up to 92 : 8), highlighting that a switch of protein template could broaden the nucleophile option for catalysis. Owing to the cofactor compatibility, the DHFR-based secondary amine catalysis could be integrated into an enzymatic recycling scheme. This established method shows substantial potential in enzyme design, applicable from studies on enzyme evolution to the development of new biocatalysts., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

In view of the excellent prospects of gene therapy and the potential safety and immunogenicity issues challenged by viral vectors, it is of great significance to develop a nonviral vector with low toxicity and low cost. In this work, we report a chitosan nanoparticle (CSNP) to be used as a gene vector prepared through a facile solvent-exchange strategy. Chitosan is first dissolved in ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIM Ac), and then, the solvent is exchanged with water/phosphate-buffered saline (PBS) to remove ionic liquid, forming a final CSNP dispersion after ultrasonication. The prepared CSNP shows a positive surface charge and can condense green fluorescent protein-encoding plasmid (pGFP) at weight ratios (CSNP/pGFP) of 5/1 or higher. Dynamic light scattering size and ζ-potential characterization and gel retardation results confirm the formation of CSNP/pGFP complexes. Compared with plain pGFP, efficient cellular internalization and significantly enhanced green fluorescent protein (GFP) expression are observed by using CSNP as a plasmid vector. Benefitting from the intrinsic biocompatibility, low cost, low immunogenicity, and abundant sources of chitosan, as well as the facile preparation and the efficient gene transfection capacity of CSNP, it is believed that this CSNP could be used as a nonviral gene vector with great clinical translational potentials.

Protein-based encapsulin nanocompartments, known for their well-defined structures and versatile functionalities, present promising opportunities in the fields of biotechnology and nanomedicine. In this investigation, we effectively developed a sortase A-mediated protein ligation system in Escherichia coli to site-specifically attach target proteins to encapsulin, both internally and on its surfaces without any further in vitro steps. We explored the potential applications of fusing sortase enzyme and a protease for post-translational ligation of encapsulin to a green fluorescent protein and anti-CD3 scFv. Our results demonstrated that this system could attach other proteins to the nanoparticles' exterior surfaces without adversely affecting their folding and assembly processes. Additionally, this system enabled the attachment of proteins inside encapsulins which varied shapes and sizes of the nanoparticles due to cargo overload. This research developed an alternative enzymatic ligation method for engineering encapsulin nanoparticles to facilitate the conjugation process.