Search

A blunt obstacle in the path of a rapid granular avalanche generates a bow shock (a jump in the avalanche thickness and velocity), a region of static grains upstream of the obstacle, and a grain-free region downstream. Here, it is shown that this interaction is qualitatively altered if the incline on which the avalanche is flowing is changed from smooth to rough. On a rough incline, the friction between the grains and the incline depends on the flow thickness and speed, which allows both rapid (supercritical) and slow (subcritical) steady uniform avalanches. For supercritical experimental flows, the material is diverted around a blunt obstacle by the formation of a bow shock and a static dead zone upstream of the obstacle. Downslope, a grain-free vacuum region forms, but, in contrast to flows on smooth beds, static levees form at the boundary between the vacuum region and the flow. In slower, subcritical, flows the flow is diverted smoothly around the dead zone and the obstacle without forming a bow shock. After the avalanche stops, signatures of the dead zone, levees and (in subcritical flows) a deeper region upslope of the obstacle are frozen into the deposit. To capture this behaviour, numerical simulations are performed with a depth-averaged avalanche model that includes frictional hysteresis and depth-averaged viscous terms, which are needed to accurately model the flowing and deposited regions. These results may be directly relevant to geophysical mass flows and snow avalanches, which flow over rough terrain and may impact barriers or other infrastructure. [ABSTRACT FROM AUTHOR]

Particles of differing sizes are notoriously prone to segregation in shear driven flows under the action of gravity. This has important implications in many industrial processes, where particle-size segregation can lead to flow problems and reduced product quality, as well as longer product development and start-up times. Particle-size segregation also readily occurs in many hazardous geophysical mass flows (such as snow avalanches, debris flows and volcanic pyroclastic flows) and can lead to the formation of destructive bouldery flow fronts and significantly longer runouts. Although general theories exist to model particle-size segregation, the detailed functional dependence of the segregation flux on the shear rate, gravity, pressure, particle concentration, grain size and grain-size ratio is still not known. This paper describes refractive-index matched oscillatory shear-cell experiments that shed light on the segregation velocity in the two extreme cases of (i) a single large intruder rising up through a matrix of smaller grains, and (ii) a single small intruder percolating down through a matrix of large particles. Despite the sometimes markedly different time scales for segregation in these two situations, a unifying scaling law has been found that is able to collapse all the experimental data over a wide range of shear rates and grain-size ratios in the range [1.17, 4.17]. The resulting functional form is easily generalizable to intermediate concentrations and can quantitatively capture laboratory experiments and numerical simulations with a 50 : 50 mix of large and small grains. [ABSTRACT FROM AUTHOR]

The net erosion-deposition rate of an avalanche is fundamental to its dynamics and in determining its growth or decay. Small-scale experiments are performed by releasing a given volume of yellow sand onto a stationary erodible red sand layer on a rough inclined plane. Depending on the erodible layer depth and the slope angle, the avalanche is found to either decay, grow, propagate steadily or rapidly shed grains to produce secondary avalanches. The use of different coloured sand with identical properties shows that a particle exchange occurs, which eventually results in a flow that is comprised entirely of particles from the stationary layer rather than the initial release. It is notoriously difficult to model the erosion and deposition processes in granular flows, but it is shown that a two-dimensional depth-averaged avalanche model, with a hysteretic basal friction law, can reproduce all of the observed behaviours. The results illustrate how a continuous exchange of particles with the substrate layer is fundamentally important to the propagation of such avalanches. An investigation into long distance propagation behaviour reveals that avalanches can reach a steady state, the size and speed of which are independent of the initially released volume. In certain conditions avalanches can grow to steady states that are significantly more massive than the flows from which they are originally formed. This paper demonstrates the importance of correctly including erosion-deposition in operational forecast models of snow avalanches and other geophysical mass flows. [ABSTRACT FROM AUTHOR]

During the last fifteen years there has been a paradigm shift in the continuum modelling of granular materials; most notably with the development of rheological models, such as the $\mu (I)$ -rheology (where $\mu$ is the friction and I is the inertial number), but also with significant advances in theories for particle segregation. This paper details theoretical and numerical frameworks (based on OpenFOAM) which unify these currently disconnected endeavours. Coupling the segregation with the flow, and vice versa, is not only vital for a complete theory of granular materials, but is also beneficial for developing numerical methods to handle evolving free surfaces. This general approach is based on the partially regularized incompressible $\mu (I)$ -rheology, which is coupled to the gravity-driven segregation theory of Gray & Ancey (J. Fluid Mech., vol. 678, 2011, pp. 353–588). These advection–diffusion–segregation equations describe the evolving concentrations of the constituents, which then couple back to the variable viscosity in the incompressible Navier–Stokes equations. A novel feature of this approach is that any number of differently sized phases may be included, which may have disparate frictional properties. Further inclusion of an excess air phase, which segregates away from the granular material, then allows the complex evolution of the free surface to be captured simultaneously. Three primary coupling mechanisms are identified: (i) advection of the particle concentrations by the bulk velocity, (ii) feedback of the particle-size and/or frictional properties on the bulk flow field and (iii) influence of the shear rate, pressure, gravity, particle size and particle-size ratio on the locally evolving segregation and diffusion rates. The numerical method is extensively tested in one-way coupled computations, before the fully coupled model is compared with the discrete element method simulations of Tripathi & Khakhar (Phys. Fluids, vol. 23, 2011, 113302) and used to compute the petal-like segregation pattern that spontaneously develops in a square rotating drum. [ABSTRACT FROM AUTHOR]

Small perturbations to a steady uniform granular chute flow can grow as the material moves downslope and develop into a series of surface waves that travel faster than the bulk flow. This roll wave instability has important implications for the mitigation of hazards due to geophysical mass flows, such as snow avalanches, debris flows and landslides, because the resulting waves tend to merge and become much deeper and more destructive than the uniform flow from which they form. Natural flows are usually highly polydisperse and their dynamics is significantly complicated by the particle size segregation that occurs within them. This study investigates the kinematics of such flows theoretically and through small-scale experiments that use a mixture of large and small glass spheres. It is shown that large particles, which segregate to the surface of the flow, are always concentrated near the crests of roll waves. There are different mechanisms for this depending on the relative speed of the waves, compared to the speed of particles at the free surface, as well as on the particle concentration. If all particles at the surface travel more slowly than the waves, the large particles become concentrated as the shock-like wavefronts pass them. This is due to a concertina-like effect in the frame of the moving wave, in which large particles move slowly backwards through the crest, but travel quickly in the troughs between the crests. If, instead, some particles on the surface travel more quickly than the wave and some move slower, then, at low concentrations, large particles can move towards the wave crest from both the forward and rearward sides. This results in isolated regions of large particles that are trapped at the crest of each wave, separated by regions where the flow is thinner and free of large particles. There is also a third regime arising when all surface particles travel faster than the waves, which has large particles present everywhere but with a sharp increase in their concentration towards the wave fronts. In all cases, the significantly enhanced large particle concentration at wave crests means that such flows in nature can be especially destructive and thus particularly hazardous. [ABSTRACT FROM AUTHOR]