Search

Biosurfactants, sustainable alternatives to petrochemical surfactants, are gaining attention for their potential in medical applications. This study focuses on producing, purifying, and characterizing a glycolipid biosurfactant from Candida sp. UFSJ7A, particularly for its application in biofilm prevention on siliconized latex catheter surfaces. The glycolipid was extracted and characterized, revealing a critical micellar concentration (CMC) of 0.98 mg/mL, indicating its efficiency at low concentrations. Its composition, confirmed through Fourier transform infrared spectroscopy (FT-IR) and thin layer chromatography (TLC), identified it as an anionic biosurfactant with a significant ionic charge of -14.8 mV. This anionic nature contributes to its biofilm prevention capabilities. The glycolipid showed a high emulsification index (E 24 ) for toluene, gasoline, and soy oil and maintained stability under various pH and temperature conditions. Notably, its anti-adhesion activity against biofilms formed by Escherichia coli, Enterococcus faecalis, and Candida albicans was substantial. When siliconized latex catheter surfaces were preconditioned with 2 mg/mL of the glycolipid, biofilm formation was reduced by up to 97% for E. coli and C. albicans and 57% for E. faecalis. These results are particularly significant when compared to the efficacy of conventional surfactants like SDS, especially for E. coli and C. albicans. This study highlights glycolipids' potential as a biotechnological tool in reducing biofilm-associated infections on medical devices, demonstrating their promising applicability in healthcare settings., (© 2024. The Author(s) under exclusive licence to Sociedade Brasileira de Microbiologia.)

Titanium implants are subject to bacterial adhesion and peri-implantitis induction, and biosurfactants bring a new alternative to the fight against infections. This work aimed to produce and characterize the biosurfactant from Bacillus subtilis ATCC 19,659, its anti-adhesion and antimicrobial activity, and cell viability. Anti-adhesion studies were carried out against Streptococcus sanguinis, Staphylococcus aureus, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Proteus mirabilis as the minimum inhibitory concentration and the minimum bactericidal concentration. Cell viability was measured against osteoblast and fibroblast cells. The biosurfactant was classified as lipopeptide, with critical micelle concentration at 40 µg mL - 1 , and made the titanium surface less hydrophobic. The anti-adhesion effect was observed for Staphylococcus aureus and Streptococcus sanguinis with 54% growth inhibition and presented a minimum inhibitory concentration of 15.7 µg mL - 1 for Streptococcus sanguinis and Aggregatibacter actinomycetemcomitans. The lipopeptide had no cytotoxic effect and demonstrated high potential application against bacterial biofilms., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Antimicrobial peptides have been developed based on plant-derived molecular scaffolds for the treatment of infectious diseases. Chenopodin is an abundant seed storage protein in quinoa, an Andean plant with high nutritional and therapeutic properties. Here, we used computer- and physicochemical-based strategies and designed four peptides derived from the primary structure of Chenopodin. Two peptides reproduce natural fragments of 14 amino acids from Chenopodin, named Chen1 and Chen2, and two engineered peptides of the same length were designed based on the Chen1 sequence. The two amino acids of Chen1 containing amide side chains were replaced by arginine (ChenR) or tryptophan (ChenW) to generate engineered cationic and hydrophobic peptides. The evaluation of these 14-mer peptides on Staphylococcus aureus and Escherichia coli showed that Chen1 does not have antibacterial activity up to 512 µM against these strains, while other peptides exhibited antibacterial effects at lower concentrations. The chemical substitutions of glutamine and asparagine by amino acids with cationic or aromatic side chains significantly favoured their antibacterial effects. These peptides did not show significant hemolytic activity. The fluorescence microscopy analysis highlighted the membranolytic nature of Chenopodin-derived peptides. Using molecular dynamic simulations, we found that a pore is formed when multiple peptides are assembled in the membrane. Whereas, some of them form secondary structures when interacting with the membrane, allowing water translocations during the simulations. Finally, Chen2 and ChenR significantly reduced SARS-CoV-2 infection. These findings demonstrate that Chenopodin is a highly useful template for the design, engineering, and manufacturing of non-toxic, antibacterial, and antiviral peptides.

Urinary tract infections (UTIs) are a significant cause of morbidity in healthcare systems and are prominently associated with applying urethral catheters, particularly in surgeries. Polyvinyl chloride (PVC) is extensively utilized in the fabrication of catheters. Biofilms, complex polymeric constructions, provide a protective milieu for cell multiplication and the enhancement of antibiotic resistance. Strategies to counteract biofilm development on medical apparatuses' surfaces incorporate antimicrobial agents such as N,N-dodecyl, and methyl polyethylenimine (DMPEI). This research endeavored to characterize the morphology of PVC and PVC-DMPEI surfaces utilizing Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) and to gauge hydrophobicity through contact angle measurements. Employing Escherichia coli, Staphylococcus aureus, and Candida albicans in adhesion assays enabled the assessment of DMPEI's efficacy in preventing microbial adherence to PVC. Butanol successfully solubilized 2 mg.mL -1 DMPEI without altering the PVC structure. SEM results substantiated the formation of a DMPEI layer on the PVC surface, which led to decreased surface roughness, as validated by AFM, and increased hydrophilicity, as demonstrated by contact angle evaluations. E. coli, S. aureus, and C. albicans exhibited significant adhesion reduction, 89.3%, 94.3%, and 86.6% on PVC-DMPEI surfaces. SEM visualizations confirmed reduced cellular colonization on PVC-DMPEI and highlighted considerable morphological modifications in E. coli. Consequently, DMPEI films effectively minimize the adhesion of E. coli, S. aureus, and C. albicans on PVC surfaces. DMPEI, with its potential as a protective coating for innovative medical devices, promises to inhibit biofilm adherence effectively., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

Background: Biosurfactants are natural bioactive compounds produced from fungi, bacteria and plants. These molecules have several properties that enable them to be involved in various industrial applications. The surface-active properties of biosurfactants allow their use in various sectors, such as agriculture, health, cosmetics, bioremediation/ petroleum, mining, and bioprocess., Objective: The objective of this study was to analyze the patents deposited in intellectual property databases for applications of biosurfactants in the areas of agriculture, health, cosmetics, bioremediation/petroleum, mining, and bioprocesses, with the research period consisting of the last six years., Methods: This study targeted the use of biosurfactants in various industrial sectors. The patent search was carried out using the Google Patents platform, a platform that is commonly used for this purpose and freely accessible., Results: During the search for patents related to applications of biosurfactants in industry filed in the last 6 years, results were found to be distributed in the following areas: agriculture (70), cosmetics (2311), bioremediation/petroleum (179), health (1794), mining (5), and bioprocess (133). Six patents were selected from each area, except for health and mining, for which the search resulted in only 5 and 4 patents, respectively, to be discussed and provide information on the biotechnological applications of biosurfactants in the industry., Conclusion: The present study showed a wide area of application of biosurfactants in industry. The interest in the inclusion of biosurfactants in the industry is directly related to the need for more sustainable solutions to solve real market problems. The cosmetics sector presented the most patents that employ the use of biosurfactants., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Chenopodin is an 11S-type globulin purified from Chenopodium quinoa seeds, which can bind carbohydrates and hemagglutinating human erythrocytes. The present study aimed to evaluate the N-terminal structure of the heterodimeric Chenopodin and its effects in models of inflammation. Chenopodin presented two subunits on its structure and has N-terminal homology with other Chenopodin in 92%. Chenopodin decreased paw edema and neutrophil recruitment induced by carrageenan in mice. Concluding, we demonstrated that Chenopodin exhibits in vivo anti-inflammatory activity.

Amazonian palm berries (açaí, Euterpe oleracea Mart.) are fruits with high nutritional value and antioxidant activity and have aroused the interest of consumers, popularizing fruit pulps enriched with probiotics. Amazonian palm berries (açaí, Euterpe oleracea Mart.) are fruits with high nutritional potential, providing a source of carbohydrates, fibers, proteins, lipids, vitamins, and minerals. Furthermore, açai provides several health benefits, including antioxidant activity. Nutritionally enhanced foods have aroused the interest of consumers, popularizing fruit pulps enriched with probiotics. Probiotics are dietary supplements consisting of live, beneficial microorganisms in the host which improve the intestinal microbiota. The objective of this study was to isolate, identify, and characterize the probiotic potential of an isolated Schleiferilactobacillus harbinensis strain (dubbed Ca12) and provide an optimized bioprocess for its production, using the complete factorial and central rotational compound design to supplement the frozen açai pulp. The isolated strain S. harbinensis Ca12 presented adequate resistance to gastric juice and bile salts, microbial activity against different Candida strains, self-aggregation and coaggregation properties, high adhesion in HT-29 cells, and 35% inhibition of Salmonella in HT-29 cells. When optimized, the cellular biomass production of the S. harbinensis Ca12 strain was approximately 600% higher than the unsupplemented whey, with a production of 3.6 × 1010 CFU mL -1 . The S. harbinensis Ca12 strain's viability in the creamy and traditional frozen açai pulp was shown to be stable for up to 6 months at 20 °C. The impact of this study involved for the first time the S. harbinensis Ca12 described in the Brazilian cocoa pulp with activity against Candida albicans of clinical importance, creating the potential of a new functional food with important benefits to human health as prevention for candidiasis., (© 2021. Sociedade Brasileira de Microbiologia.)

Introduction: Background: the aim of the present study was to compare the prevalence of metabolic syndrome in Brazilian children aged 6-10 years using three different international criteria. Methods: systolic and diastolic blood pressure (SBP and DBP), high-density lipoprotein (HDL) cholesterol, low-density lipoprotein (LDL) cholesterol, triglycerides, fasting glucose, and insulin levels were measured in 290 schoolchildren, and the presence of metabolic syndrome was analyzed according to the criteria established by Cook, Boney, and Ferreira. Results: the prevalence of metabolic syndrome was 2.27 % (Boney and Ferreira criteria) and 7.58 % (Cook criteria) for girls, and 3.8 % (Boney and Ferreira criteria) and 5.06 % (Cook criteria) for boys. Agreement in pairs showed a concordance of 57.5 % (Kappa = 0.57) between Boney and Cook criteria, and 65.2 % (Kappa = 0.65) between Cook and Ferreira. The greatest concordance found was 77 % (Kappa = 0.77) between Boney and Ferreira criteria, demonstrating a substantial agreement. Conclusion: prevalence according to Boney and Ferreira criteria was lower than according to Cook criteria. Therefore, we suggest the use of Cook criteria in clinical practice for the diagnosis of metabolic syndrome, since this criterion provided a wider diagnostic range, thereby reducing the risk of underdiagnosis.

Vancomycin-loaded N,N-dodecyl,methyl-polyethylenimine nanoparticles coated with hyaluronic acid (VCM-DMPEI nanoparticles/HA) were synthesized as an adjuvant for the treatment of bacterial endophthalmitis. The nanoparticles were formulated by experimental statistical design, thoroughly characterized, and evaluated in terms of bactericidal activity and both in vitro and in vivo ocular biocompatibility. The VCM-DMPEI nanoparticles/HA were 154 ± 3 nm in diameter with a 0.197 ± 0.020 polydispersity index; had a + 26.4 ± 3.3 mV zeta potential; exhibited a 93% VCM encapsulation efficiency; and released 58% of the encapsulated VCM over 96 h. VCM and DMPEI exhibited a synergistic bactericidal effect. The VCM-DMPEI nanoparticles/HA were neither toxic to ARPE-19 cells nor irritating to the chorioallantoic membrane. Moreover, the VCM-DMPEI nanoparticles/HA did not induce modifications in retinal functions, as determined by electroretinography, and in the morphology of the ocular tissues. In conclusion, the VCM-DMPEI nanoparticles/HA may be a useful therapeutic adjuvant to treat bacterial endophthalmitis., Competing Interests: Declaration of competing interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: Microorganisms can migrate from the external environment to the patient's organism through the insertion of catheters. Despite being indispensable medical device, the catheter surface can be colonized by microorganisms and become a starting point for biofilm formation. Therefore, new technologies are being developed in order to modify surfaces to prevent the adhesion and survival of microorganisms. Patents with the use of DMPEI have been filed., Objective: In the present work, we coated latex catheter surfaces with 2 mg mL-1 DMPEI in different solvents, evaluated the wettability of the surface and the anti- biofilm activity of the coated catheter against Escherichia coli, Staphylococcus aureus, and Candida albicans., Methods: We coated the inner and outer catheter surfaces with 2 mg mL-1 of DMPEI solubilized in butanol, dimethylformamide, and cyclohexanone and the surfaces were analyzed visually. Contact angle measurement allowed the analysis of the wettability of the surfaces. The CFU mL-1 count evaluated E. coli, S. aureus, and C. albicans adhesion onto the control and treated surfaces., Results: The contact angle decreased from 50.48º to 46.93º on the inner surface and from 55.83º to 50.91º on the outer surface of latex catheters coated with DMPEI. The catheter coated with DMPEI showed anti-biofilm activity of 83%, 88%, and 93% on the inner surface and 100%, 92%, and 86% on the outer surface for E. coli, S. aureus, and C. albicans, respectively., Conclusion: Latex catheter coated with DMPEI efficiently impaired the biofilm formation both on the outer and inner surfaces, showing a potential antimicrobial activity along with a high anti-biofilm activity for medical devices., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Background: For screening probiotic strains with viability and stability in non-dairy foods for health benefits, we revised all patents relating to probiotics in food., Objective: Screening of potential probiotics from Brazilian Minas artisanal cheese and verify their survival in frozen Brazilian cocoa pulp., Methods: Isolation and identification of the strains. The potential probiotic characterization involved gastric juice and bile resistance, antibiotic and antimicrobial activity, hydrophobicity, autoaggregation, coaggregation and adhesion assay in HT-29 cells. Organoleptic, viability and stability of probiotic strain in frozen cocoa pulp were evaluated., Results: Fourteen strains of Lactobacillus plantarum (9), Weissella paramesenteroides (3), Lactobacillus fermentum (1), and Leuconostoc mesenteroides (1) were obtained. Most of the strains were resistant to simulated gastric acidity and bile salts. Almost all strains were sensitive to the antibiotics tested, except to ciprofloxacin and vancomycin. About 47% of the strains are potential producers of bacteriocins. High hydrophobicity was observed for four strains. Autoaggregation ranged from 8.3-72.6% and the coaggregation capacity from 5.2-60.2%. All of the assessed strains presented more than 90% of adhesion to HT-29 intestinal cells. The percentage of Salmonella inhibition in HT-29 cells ranged from 4.7-31.1%. No changes in color, aroma, and pH were observed in cocoa pulps after storage at -20 °C for 90 days., Conclusion: Wild strains of acid lactic bacteria from cheese proved to be viable and stable in frozen Brazilian cocoa pulp. This work showed a promising application of L. plantarum isolated strains to be used with frozen cocoa pulp matrix in probiotics food industry., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Background: Numerous causes of infection in arthroplasties are related to biofilm formation on implant surfaces. In order to circumvent this problem, new alternatives to prevent bacterial adhesion biosurfactants-based are emerging due to low toxicity, biodegradability and antimicrobial activity of several biosurfactants. We revised all patents relating to biosurfactants of applicability in orthopedic implants., Methods: This work aims to evaluate the capability of a lipopeptide produced by Bacillus subtilis ATCC 19659 isolates acting as inhibitors of the adhesion of Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 29213 onto titanium and stainless steel surfaces and its antimicrobial activity., Results: The adhesion of the strains to the stainless-steel surface was higher than that of titanium. Preconditioning of titanium and stainless-steel surfaces with 10 mg mL-1 lipopeptide reduced the adhesion of E. coli by up to 93% and the adhesion of S. aureus by up to 99.9%, suggesting the strong potential of lipopeptides in the control of orthopedic infections. The minimal inhibitory concentration and minimum bactericidal concentration were 10 and 240 µg mL-1 for E. coli and S. aureus, respectively., Conclusion: The lipopeptide produced by Bacillus subtilis ATCC 19659 presented high biotechnological application in human health against orthopedic implants infections., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Background: Phytases are enzymes capable of degrading phytic acid and used in animal feed supplementation in order to improve digestibility through the release of minerals such as phosphorus., Objective: The main goal of this study was to express and characterize a Yersinia intermedia phytase expressed in Escherichia coli cells., Methods: The Y. intermedia phytase gene was synthesized and overexpressed in Escherichia coli cells. The phytase recombinante (rPHY) was purified to homogeneity using a Ni-NTA column. The biochemical and biophysical properties of the rPHY were measured in order to fully characterize the recombinant enzyme. The following patents database were consulted: Espacenet, USPTO, LATIPAT, Patent Scope, WIPO and Google Patents., Results: The results showed that the rPHY is active at 37-40ºC and presented an optimal pH and temperature of 8.0 and 40°C, respectively. The phytase rPHY was activated by Cu2+ ion and showed resistance to trypsin and pepsin, retaining 55% of the activity at the ratio of 0.02. Furthermore, the dissociation constant (Kd = 1.1150 ± 0.0087 mM), as estimated by a fluorescence binding assay, suggests a medium affinity of the enzyme with the substrate., Conclusion: The results of this article can be considered as innovative and for this reason, they were protected by Intellectual Property Law in Brazil. Take together, the biochemical properties of the rPHY could be useful in future for its industrial application of this enzyme as an additive in the monogastric feed., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Conventional biosurfactants have high production costs. Therefore, the use of low-cost carbon sources for their production is attractive for industry. The ability to remain stable under various environmental conditions further extends industrial application. Here we aimed to evaluate the stability of a new lipopeptide produced by Corynebacterium aquaticum using fish residue as an unconventional energy source. The biosurfactant was produced using 3% fish residue, 2% of the microorganism, and mineral medium. Biosurfactant characterization was performed by thin layer chromatography (TLC), as well as by testing its infrared, surface tension, emulsifying activity, and ionic character. The stability of the biosurfactant was evaluated by testing its surface tension at a range of temperatures, pH, and saline concentrations, as well as after 6 months of storage. The biosurfactant was characterized as a lipopeptide due to its retention time, which was coincident with the amino acid and lipid chains obtained in the TLC analysis, being confirmed by some regions of absorption verified in the infrared analysis. The surface tension and emulsifying activity of the biosurfactant were 27.8 mN/m and 87.6%, respectively, and showed anionic character. The biosurfactant was stable at temperatures of 20 to 121 °C, in saline concentrations of 1 to 7%, and at pH close to neutrality. Based on our findings, it is possible to use unconventional sources of energy to produce a lipopeptide biosurfactant that can act under various environments.

Objective: to estimate the prevalence of TaqIA, -141C and rs6280 polymorphisms of the ANKK1, DRD2 and DRD3 genes and evaluate their association with the occurrence of metabolic syndrome in patients with refractory schizophrenia., Method: cross-sectional study conducted in the Extended Western Region of Minas Gerais, with refractory schizophrenic patients using the antipsychotic clozapine. Sociodemographic, clinical, anthropometric, biochemical and genetic data were collected. Univariate analysis of the data was performed., Results: seventy-two patients participated in the study and the occurrence of Metabolic Syndrome was observed in 47.2% of them. There was no association between Metabolic Syndrome and the studied polymorphisms. There was a statistically significant difference in the low HDL parameter with homozygous genotype for the C allele of the -141C polymorphism of the DRD2 gene., Conclusion: a high prevalence of MS was evidenced. The -141C polymorphism was associated with low HDL. Genetic analysis and identification of metabolic alterations in this group of patients can guide drug treatment and provide a better quality of life.

In this study, the aim was to determine the complete sequence of the Copaifera langsdorffii trypsin inhibitor (CTI)-1 using 2-dimensional (2D)-PAGE, matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF), and quadrupole time-of-flight (QTOF) spectrometry. Spots A (CTI-1) and F (CTI-2) were submitted to enzymatic digestions with trypsin, SV8, and clostripain. The accurate mass of the peptide obtained from each digest was determined by mass spectrometry (MS) using MALDI-TOF. The most abundant peptides were purified and sequenced in a liquid chromatograph connected to an electrospray ionization-QTOF MS. When the purified trypsin inhibitor was submitted to 2D electrophoresis, different spots were observed, suggesting that the protein is composed of 2 subunits with microheterogeneity. Isoelectric points of 8.0, 8.5, and 9.0 were determined for the 11 kDa subunit and of 4.7, 4.6, and 4.3 for the 9 kDa subunit. The primary structure of CTI-1, determined from the mass of the peptide of the enzymatic digestions and the sequence obtained by MS, indicated 180 shared amino acid residues and a high degree of similarity with other Kunitz (KTI)-type inhibitors. The peptide also contained an Arg residue at the reactive site position. Its 3-dimensional structure revealed that this is because the structural discrepancies do not affect the canonical conformation of the reactive loop of the peptide. Results demonstrate that a detailed investigation of the structural particularities of CTI-1 could provide a better understanding of the mechanism of action of these proteins, as well as clarify its biologic function in the seeds. CTI-1 belongs to the KTI family and is composed of 2 polypeptide chains and only 1 disulfide bridge.

Several sesquiterpene lactone were synthesized and their inhibitive activities on phospholipase A(2) (PLA(2)) from Bothrops jararacussu venom were evaluated. Compounds Lac01 and Lac02 were efficient against PLA(2) edema-inducing, enzymatic and myotoxic activities and it reduces around 85% of myotoxicity and around 70% of edema-inducing activity. Lac05-Lac08 presented lower efficiency in inhibiting the biological activities studied and reduce the myotoxic and edema-inducing activities around only 15%. The enzymatic activity was significantly reduced. The values of inhibition constants (K(I)) for Lac01 and Lac02 were approximately 740 μM, and for compounds Lac05-Lac08 the inhibition constants were approximately 7.622-9.240 μM. The enzymatic kinetic studies show that the sesquiterpene lactones inhibit PLA(2) in a non-competitive manner. Some aspects of the structure-activity relationships (topologic, molecular and electronic parameters) were obtained using ab initio quantum calculations and analyzed by chemometric methods (HCA and PCA). The quantum chemistry calculations show that compounds with a higher capacity of inhibiting PLA(2) (Lac01-Lac04) present lower values of highest occupied molecular orbital (HOMO) energy and molecular volume (VOL) and bigger values of hydrophobicity (LogP). These results indicate some topologic aspects of the binding site of sesquiterpene lactone derivatives and PLA(2)., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The effect of temperature on the activity and structural stability of an acid phosphatase (EC 3.1.3.2.) purified from castor bean (Ricinus communis L.) seeds have been examined. The enzyme showed high activity at 45 degrees C using p-nitrophenylphosphate (p-NPP) as substrate. The activation energy for the catalyzed reaction was 55.2 kJ mol(-1) and the enzyme maintained 50% of its activity even after 30 min at 55 degrees C. Thermal inactivation studies showed an influence of pH in the loss of enzymatic activity at 60 degrees C. A noticeable protective effect from thermal inactivation was observed when the enzyme was preincubated, at 60 degrees C, with the reaction products inorganic phosphate-P (10 mM) and p-nitrophenol-p-NP(10 mM). Denaturation studies showed a relatively high transition temperature (Tm) value of 75 degrees C and an influence of the combination of Pi (10 mM) and p-NP (10 mM) was observed on the conformational behaviour of the macromolecule.

In this work we examined the effect of urea and guanidinium chloride on the structural stability of a single isoform of soybean seed acid phosphatase, based on the intensity of tryptophan fluorescence as a function of denaturant concentration. The free energy of unfolding, DeltaGu, was calculated at 25 degrees C as a function of the concentrations of both chaotropic agents; the conformational stability, DeltaG (H2O), was determined to be 2.48 kcal mol(-1). Center of mass, determined from analysis of fluorescence data, was used as a parameter to assess conformational changes. Our results indicate that complete enzyme inactivation occurred before full enzyme unfolding in both cases, and suggest that there are differences between the conformational flexibility of the active-site and that of the macromolecule as a whole.

Uric acid inhibited 50% of the activity of bovine kidney low molecular mass phosphotyrosine protein phosphatase at concentrations of 1.0, 0.4, 1.3, and 0.2 mM, respectively for p-nitrophenyl phosphate (p-NPP), flavine mononucleotide, beta-naphthyl phosphate and tyrosine phosphate (Tyr-P) as substrates. The mixed type inhibition of p-NPP hydrolysis was fully reversible, with Kic and Kiu values of 0.4 and 1.1 mM, respectively; the inhibition by uric acid shifted the pH optimum from 5.0 to 6.5. When Tyr-P was the substrate, competitive inhibition was observed with a Ki value of 0.05 mM. Inhibition studies by uric acid in the presence of thiol compounds, and preincubation studies in the presence of inorganic phosphate suggest that the interaction of uric acid with the enzyme occurred at the active site, but did not involve SH residues, and that the mechanism of inhibition depended on the structure of the substrates.