Search

Objectives: Spatially fractionated radiation therapy (SFRT) intentionally delivers a heterogeneous dose distribution characterized by alternating regions of high and low doses throughout a tumor. This modality may enhance response to subsequent whole tumor radiation in bulky and radioresistant lesions that are historically less responsive to conventional radiation doses alone. The current study presents a single institution experience with modern era SFRT using predominantly a volumetric modulated arc therapy (VMAT) lattice technique., Methods: Patients treated with SFRT between 10/2019 and 6/2022 were included for analysis. Patient characteristics, tumor characteristics, and dosimetric parameters were collected retrospectively as part of an institutional review board approved registry and protocol. Descriptive statistics were used to collate patient data and Kaplan Meier analysis were generated for overall survival and local control. Univariate analyses were used to investigate factors associated with outcomes., Results: A total of 176 patients with 186 sites treated were included. Median age was 64 and the most commonly treated histologies were non-small cell lung cancer and sarcoma. The most common SFRT dose was 20 Gy in 1 fraction with 88% of patients receiving follow-up whole tumor radiotherapy to a median EQD2 dose of 32.5 Gy (α/β=10). Median gross tumor volume (GTV) was 480.5 cc (7.8-10,897.8). Median follow-up was 322 days with 1 year overall survival 37% and 1 year local control 81%. Local control was available in 138 treated sites (131 patients. SFRT factors including dose to 10% (D10%), dose to 90% (D90%), equivalent uniform dose, and mean dose were highly predictive of local control. Grade 3 toxicity occurred in 9 patients. All of these patients received follow-up whole tumor radiation and at least two of these were attributable to unexpected rapid regression of tumor., Conclusions: SFRT is a promising technique that appears to confer good local control across a disparate group of patients with bulky and radioresistant tumors. Dosimetric parameters of SFRT treatment plans may be independent predictors of local control. Further investigation is warranted as are prospective trials to evaluate the role of SFRT in both the palliative and definitive setting., (Copyright © 2024. Published by Elsevier Inc.)

Purpose: Minibeam radiation therapy (MBRT) is characterized by the delivery of submillimeter-wide regions of high "peak" and low "valley" doses throughout a tumor. Preclinical studies have long shown the promise of this technique, and we report here the first clinical implementation of MBRT., Methods and Materials: A clinical orthovoltage unit was commissioned for MBRT patient treatments using 3-, 4-, 5-, 8-, and 10-cm diameter cones. The 180 kVp output was spatially separated into minibeams using a tungsten collimator with 0.5 mm wide slits spaced 1.1 mm on center. Percentage depth dose (PDD) measurements were obtained using film dosimetry and plastic water for both peak and valley doses. PDDs were measured on the central axis for offsets of 0, 0.5, and 1 cm. The peak-to-valley ratio was calculated at each depth for all cones and offsets. To mitigate the effects of patient motion on delivered dose, patient-specific 3-dimensional-printed collimator holders were created. These conformed to the unique anatomy of each patient and affixed the tungsten collimator directly to the body. Two patients were treated with MBRT; both received 2 fractions., Results: Peak PDDs decreased gradually with depth. Valley PDDs initially increased slightly with depth, then decreased gradually beyond 2 cm. The peak-to-valley ratios were highest at the surface for smaller cone sizes and offsets. In vivo film dosimetry confirmed a distinct delineation of peak and valley doses in both patients treated with MBRT with no dose blurring. Both patients experienced prompt improvement in symptoms and tumor response., Conclusions: We report commissioning results, treatment processes, and the first 2 patients treated with MBRT using a clinical orthovoltage unit. While demonstrating the feasibility of this approach is a crucial first step toward wider translation, clinical trials are needed to further establish safety and efficacy., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Prolonged survival of patients with metastatic disease has furthered interest in metastasis-directed therapy (MDT)., Research Question: There is a paucity of data comparing lung MDT modalities. Do outcomes among sublobar resection (SLR), stereotactic body radiation therapy (SBRT), and percutaneous ablation (PA) for lung metastases vary in terms of local control and survival?, Study Design and Methods: Medical records of patients undergoing lung MDT at a single cancer center between January 2015 and December 2020 were reviewed. Overall survival, local progression, and toxicity outcomes were collected. Patient and lesion characteristics were used to generate multivariable models with propensity weighted analysis., Results: Lung MDT courses (644 total: 243 SLR, 274 SBRT, 127 PA) delivered to 511 patients were included with a median follow-up of 22 months. There were 47 local progression events in 45 patients, and 159 patients died. Two-year overall survival and local progression were 80.3% and 63.3%, 83.8% and 9.6%, and 4.1% and 11.7% for SLR, SBRT, and PA, respectively. Lesion size per 1 cm was associated with worse overall survival (hazard ratio, 1.24; P = .003) and LP (hazard ratio, 1.50; P < .001). There was no difference in overall survival by modality. Relative to SLR, there was no difference in risk of local progression with PA; however, SBRT was associated with a decreased risk (hazard ratio, 0.26; P = .023). Rates of severe toxicity were low (2.1%-2.6%) and not different among groups., Interpretation: This study performs a propensity weighted analysis of SLR, SBRT, and PA and shows no impact of lung MDT modality on overall survival. Given excellent local control across MDT options, a multidisciplinary approach is beneficial for patient triage and longitudinal management., Competing Interests: Financial/Nonfinancial Disclosures None declared., (Copyright © 2023 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.)

Objective . An algorithm was developed for automated positioning of lattice points within volumetric modulated arc lattice radiation therapy (VMAT LRT) planning. These points are strategically placed within the gross tumor volume (GTV) to receive high doses, adhering to specific separation rules from adjacent organs at risk (OARs). The study goals included enhancing planning safety, consistency, and efficiency while emulating human performance. Approach . A Monte Carlo-based algorithm was designed to optimize the number and arrangement of lattice points within the GTV while considering placement constraints and objectives. These constraints encompassed minimum spacing between points, distance from OARs, and longitudinal separation along the z -axis. Additionally, the algorithm included an objective to permit, at the user's discretion, solutions with more centrally placed lattice points within the GTV. To validate its effectiveness, the automated approach was compared with manually planned treatments for 24 previous patients. Prior to clinical implementation, a failure mode and effects analysis (FMEA) was conducted to identify potential shortcomings. Main results. The automated program successfully met all placement constraints with an average execution time (over 24 plans) of 0.29 ±0.07 min per lattice point. The average lattice point density (# points per 100 c.c. of GTV) was similar for automated (0.725) compared to manual placement (0.704). The dosimetric differences between the automated and manual plans were minimal, with statistically significant differences in certain metrics like minimum dose (1.9% versus 1.4%), D5% (52.8% versus 49.4%), D95% (7.1% versus 6.2%), and Body-GTV V30% (20.7 c.c. versus 19.7 c.c.). Significance. This study underscores the feasibility of employing a straightforward Monte Carlo-based algorithm to automate the creation of spherical target structures for VMAT LRT planning. The automated method yields similar dose metrics, enhances inter-planner consistency for larger targets, and requires fewer resources and less time compared to manual placement. This approach holds promise for standardizing treatment planning in prospective patient trials and facilitating its adoption across centers seeking to implement VMAT LRT techniques., (© 2024 Institute of Physics and Engineering in Medicine.)

Patients with advanced cancers who either do not experience initial response to or progress while on immune checkpoint inhibitors (ICIs) receive salvage radiotherapy to reduce tumor burden and tumor-related symptoms. Occasionally, some patients experience substantial global tumor regression with a rebound of cytotoxic CD8 + T cells. We have termed the rebound of cytotoxic CD8 + T cells in response to salvage therapy as T cell resilience and examined the underlying mechanisms of resilience. Resilient T cells are enriched for CX3CR1 + CD8 + T cells with low mitochondrial membrane potential, accumulate less reactive oxygen species (ROS), and express more malic enzyme 1 (ME1). ME1 overexpression enhanced the cytotoxicity and expansion of effector CD8 + T cells partially via the type I interferon pathway. ME1 also increased mitochondrial respiration while maintaining the redox state balance. ME1 increased the cytotoxicity of peripheral lymphocytes from patients with advanced cancers. Thus, preserved resilient T cells in patients rebound after salvage therapy and ME1 enhances their resiliency.

Purpose: Spatially fractionated radiation therapy (SFRT) is a recognized technique for enhancing tumor response in radioresistant and bulky tumors. We analyzed clinical and treatment outcomes in patients with bone and soft tissue sarcomas treated with modern SFRT techniques., Methods and Materials: Patients with metastatic or unresectable sarcoma treated with brass collimator, volumetric modulated arc therapy lattice, or proton SFRT from December 2019 to June 2022 were retrospectively reviewed. Consolidative external beam radiation therapy (EBRT) was delivered at the physician's discretion. Patient and treatment characteristics, treatment response (symptom improvement, local control, and imaging response), and toxicity data were collected., Results: The cohort consisted of 53 patients treated with 61 SFRT treatments. Median age at treatment was 60.0 years. The primary location was soft tissue in 46 courses (75%) and bone in 15 (25%). Fifty-three courses (87%) were treated for symptom relief. The most used SFRT technique was volumetric modulated arc therapy lattice (n = 52, 85%) to a dose of 20 Gy (n = 48, 79%; range, 16-20 Gy). EBRT was delivered post-SFRT in 55 (90%) treatment courses with a median time interval from SFRT to EBRT of 5 days (range, 0-14 days). Median physical EBRT dose and fractionation was 40 Gy (range, 9-73.5 Gy) and 10 fractions (range, 3-33 fractions). Median follow up was 7.4 months (range, 0.2-30 months). One-year overall survival and local control rates were 53% and 82%. Symptom relief was documented with 32 treatment courses (60%). Stable or partial response was observed with 47 treatment courses (90%). Four grade 3 to 4 acute and subacute toxicities were attributable to SFRT (8%)., Conclusions: The current series is the largest to date documenting outcomes for SFRT in sarcomas. Our results suggest combined SFRT with EBRT is associated with a favorable toxicity profile and high rates of symptomatic and radiographic responses for metastatic or unresectable sarcomas., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Purpose: To provide clinical guidance for centers wishing to implement photon spatially fractionated radiation therapy (SFRT) treatments using either a brass grid or volumetric modulated arc therapy (VMAT) lattice approach., Methods: We describe in detail processes which have been developed over the course of a 3-year period during which our institution treated over 240 SFRT cases. The importance of patient selection, along with aspects of simulation, treatment planning, quality assurance, and treatment delivery are discussed. Illustrative examples involving clinical cases are shown, and we discuss safety implications relevant to the heterogeneous dose distributions., Results: SFRT can be an effective modality for tumors which are otherwise challenging to manage with conventional radiation therapy techniques or for patients who have limited treatment options. However, SFRT has several aspects which differ drastically from conventional radiation therapy treatments. Therefore, the successful implementation of an SFRT treatment program requires the multidisciplinary expertise and collaboration of physicians, physicists, dosimetrists, and radiation therapists., Conclusions: We have described methods for patient selection, simulation, treatment planning, quality assurance and delivery of clinical SFRT treatments which were built upon our experience treating a large patient population with both a brass grid and VMAT lattice approach. Preclinical research and patient trials aimed at understanding the mechanism of action are needed to elucidate which patients may benefit most from SFRT, and ultimately expand its use., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Associazione Italiana di Fisica Medica e Sanitaria. Published by Elsevier Ltd. All rights reserved.)

Purpose: Our purpose was to dosimetrically compare volumetric modulated arc therapy (VMAT) lattice radiation therapy (LRT), brass, and proton grid therapy planning techniques and suggest potential clinical applications for each., Methods and Materials: Four plans delivering 20 Gy in 1 fraction were created for each of 22 patients. Brass and proton grid plans used a single static field and the same beam angle. Proton grid plans used the same beam size and spacing as the brass block. Two VMAT LRT plans were generated for each patient: one with 1-cm diameter lattice points spaced 2-cm center-to-center (2-cm VMAT) and another with 1.5-cm diameter lattice points spaced 3-cm center-to-center (3- cm VMAT). Maximum, minimum, mean, and equivalent uniform dose and the dose to 90%, 50%, 20%, 10%, and 5% (D90%[%], D50%[%], etc) of gross tumor volume (GTV) were reported. D10%/D90% characterized dose heterogeneity. Normal tissue dose was generalized by the maximum dose and volume in cubic centimeters of tissue outside the GTV receiving 30% and 50% of prescription (body-GTV V30%[cm 3 ]; body-GTV V50%[cm 3 ])., Results: VMAT LRT plans delivered the highest maximum GTV doses while brass and proton plans delivered higher D5%(%), D10%(%), and D20%(%) values. D50%(%), D90%(%), and minimum dose varied little between plan types. Proton and brass plans had the highest dose heterogeneity. Two-centimeter VMAT and brass grid plans had the highest mean GTV doses. Two-centimeter VMAT plans had the highest equivalent uniform dose, followed by 3-cm VMAT, brass, and proton plans. VMAT LRT plans exhibited the lowest normal tissue maximum and body GTV V30%(cm 3 ) and body GTV V50%(cm 3 ) values., Conclusions: An in-depth comparison of target and normal tissue dosimetric parameters for common photon and proton grid therapy planning techniques was made. Strengths of each plan type were noted leading to general recommendations on usage., (Copyright © 2022 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.)

Computations of heterogeneity dose parameters in GRID therapy remain challenging in many treatment planning systems (TPS). To address this difficulty, we developed reference dose tables for a standard GRID collimator and validate their accuracy. The .decimal Inc. GRID collimator was implemented within the Eclipse TPS. The accuracy of the dose calculation was confirmed in the commissioning process. Representative sets of simulated ellipsoidal tumours ranging from 6-20 cm in diameter at a 3-cm depth; 16-cm ellipsoidal tumours at 3, 6, and 10 cm in depth were studied. All were treated with 6MV photons to a 20 Gy prescription dose at the tumour center. From these, the GRID therapy dosimetric parameters (previously recommended by the Radiosurgery Society white paper) were derived. Differences in D5 through D95 and EUD between different tumour sizes at the same depth were within 5% of the prescription dose. PVDR from profile measurements at the tumour center differed from D10/D90, but D10/D90 variations for the same tumour depths were within 11%. Three approximation equations were developed for calculating EUD s of different prescription doses for three radiosensitivity levels for 3-cm deep tumours. Dosimetric parameters were consistent and predictable across tumour sizes and depths. Our study results support the use of the developed tables as a reference tool for GRID therapy.

Purpose: The purpose of this study was to provide guidance in developing and implementing a process for the accurate delivery of free breathing respiratory amplitude-gated treatments., Methods: A phase-based 4DCT scan is acquired at time of simulation and motion is evaluated to determine the exhale phases that minimize respiratory motion to an acceptable level. A phase subset average CT is then generated for treatment planning and a tracking structure is contoured to indicate the location of the target or a suitable surrogate over the planning phases. Prior to treatment delivery, a 4DCBCT is acquired and a phase subset average is created to coincide with the planning phases for an initial match to the planning CT. Fluoroscopic imaging is then used to set amplitude gate thresholds corresponding to when the target or surrogate is in the tracking structure. The final imaging prior to treatment is an amplitude-gated CBCT to verify both the amplitude gate thresholds and patient positioning. An amplitude-gated treatment is then delivered. This technique was commissioned using an in-house lung motion phantom and film measurements of a simple two-field 3D plan., Results: The accuracy of 4DCBCT motion and target position measurements were validated relative to 4DCT imaging. End to end testing showed strong agreement between planned and film measured dose distributions. Robustness to interuser variability and changes in respiratory motion were demonstrated through film measurements., Conclusions: The developed workflow utilizes 4DCBCT, respiratory-correlated fluoroscopy, and gated CBCT imaging in an efficient and sequential process to ensure the accurate delivery of free breathing respiratory-gated treatments., (© 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Purpose: To describe a novel and practical volumetric modulated arc therapy (VMAT) planning approach for grid therapy., Methods and Materials: Dose is prescribed to 1.5-cm diameter spherical contours placed throughout the gross tumor volume (GTV). Placement of spheres is variable, but they must maintain at least a 3-cm (center to center) separation, and the edge of any sphere must be at least 1 cm from any organ at risk (OAR). Three concentric ring structures are used during optimization to confine the highest doses to the center of the spheres and maximize dose sparing between them. The end result is alternating regions of high and low dose throughout the GTV and minimal dose to OARs. High-intensity flattening filter-free (FFF) modes are used to efficiently deliver the plans, and entire treatments typically take only 15 to 20 minutes., Results: The approach is illustrated with 2 examples treated at our institution. Patient #1 had a 1703-cm 3 mediastinal mass and was prescribed 20 Gray (Gy) to 24 spherical regions within the GTV. Patient #2 had a 3680-cm 3 abdominal tumor and was prescribed 18 Gy to 32 spherical regions within the GTV. Both patients received additional consolidative radiation approximately 1 week after the initial VMAT grid treatment. Each patient experienced marked reduction in tumor size and symptomatic relief without treatment-related complications., Conclusions: We have described in detail a planning approach for VMAT grid therapy treatments that can typically be delivered in a clinically practical time span. The VMAT approach is especially useful for tumors that are surrounded by sensitive critical structures. As many centers offer VMAT treatments, the approach is widely accessible and can be readily implemented once appropriate patient selection and delivery processes are established., (Copyright © 2020 The Author(s). Published by Elsevier Inc. All rights reserved.)

The use of radiochromic film (RCF) dosimetry in radiation therapy is extensive due to its high level of achievable accuracy for a wide range of dose values and its suitability under a variety of measurement conditions. However, since the publication of the 1998 AAPM Task Group 55, Report No. 63 on RCF dosimetry, the chemistry, composition, and readout systems for RCFs have evolved steadily. There are several challenges in using the new RCFs, readout systems and validation of the results depending on their applications. Accurate RCF dosimetry requires understanding of RCF selection, handling and calibration methods, calibration curves, dose conversion methods, correction methodologies as well as selection, operation and quality assurance (QA) programs of the readout systems. Acquiring this level of knowledge is not straight forward, even for some experienced users. This Task Group report addresses these issues and provides a basic understanding of available RCF models, dosimetric characteristics and properties, advantages and limitations, configurations, and overall elemental compositions of the RCFs that have changed over the past 20 yr. In addition, this report provides specific guidelines for data processing and analysis schemes and correction methodologies for clinical applications in radiation therapy., (© 2020 American Association of Physicists in Medicine.)

Radiochromic film (RCF) has several advantageous characteristics which make it an attractive dosimeter for many clinical tasks in radiation oncology. However, knowledge of and strict adherence to complicated protocols in order to produce accurate measurements can prohibit RCF from being widely adopted in the clinic. The purpose of this study was to outline some simple and straightforward RCF fundamentals in order to help clinical medical physicists perform accurate RCF measurements. We describe a process and methodology successfully used in our practice with the hope that it saves time and effort for others when implementing RCF in their clinics. Two RCF analysis software programs which differ in cost and complexity, the commercially available FilmQA Pro package and the freely available ImageJ software, were used to show the accuracy, consistency and limitations of each. The process described resulted in a majority of the measurements across a wide dose range to be accurate within ± 2% of the intended dose using either FilmQA Pro or ImageJ., Competing Interests: The authors have declared that no competing interests exist.

Radiochromic film (RCF) is a valuable dosimetric tool, primarily due to its sub-millimeter spatial resolution. For accurate proton dosimetry, the dependence of film response on linear energy transfer (LET) must be characterized and calibrated. In this work, we characterized film under-response, or 'quenching', as a function of dose-weighted linear energy transfer (LET d ) in several proton fields and established a simple, linear relationship with LET d . We performed measurements as a function of depth in a PMMA phantom irradiated by a spot-scanning proton beam. The fields had energies of 71.3 MeV, 71.3 MeV with filter, and 159.9 MeV. At each depth (measurements taken in depth step sizes of 0.5-1 mm in the Bragg peak), we measured dose with a PTW Markus ion chamber and EBT3 RCF. EBT3 under-response was characterized by the ratio of dose measured with film to that with ion chamber. LET d values for our experimental setup were calculated using in-house clinical Monte Carlo code. Measured film under-response increased with LET d , from approximately 10% under-response for LET d   =  5 keV µm -1 to approximately 20% for LET d   =  8 keV µm -1 . The under-response for all measurements was plotted versus LET d . A linear fit to the data was performed, yielding a function for under-response, [Formula: see text], with respect to LET d : [Formula: see text]. Finally, the linear under-response relationship was applied to a film measurement within a spread-out Bragg peak (SOBP). Without correcting for LET d -dependence in the SOBP measurement, the discrepancy between film and Monte Carlo profiles was greater than 15% at the distal edge. With correction, the corrected film profile was within 2% and 1 mm of the Monte Carlo profile. RCF response depends on LET d , potentially under-responding by  >15% in clinically-relevant scenarios. Therefore, it is insufficient to perform only a dose calibration; LET calibration is also necessary for accurate proton film dosimetry. The LET d -dependence of EBT3 can be described by a single, linear function over a range of clinically-relevant proton therapy LET d values.

Purpose: This study aimed to evaluate dose calculation accuracy for the Eclipse Analytical Anisotropic Algorithm (AAA) and Acuros XB algorithm for various lung tumor sizes and to investigate dosimetric changes associated with treatment of regressing tumors., Methods and Materials: A water phantom with cylindrical cork inserts (lung surrogates) was fabricated. Large (202 cm 3 ), medium (54 cm 3 ), and small (3 cm 3 ) solid water tumors were implanted within cork inserts. A plain cork insert was used to simulate a lung without a tumor. The cork inserts and tumors were cut along the long axis, and Gafchromic film was placed between the sections to measure dose distributions. Three-dimensional conformal plans were created using 6 MV and 10 MV beams, and volumetric modulated arc therapy plans were created using 6 MV beams for each tumor size. Doses were calculated using Eclipse AAA and Acuros XB. The measured and calculated dose distributions were compared for each tumor size and treatment algorithm. To simulate a regressing tumor, the original plans created for the large tumor were separately delivered to the phantom that contained a small, medium, or no tumor. The dosimetric effects were evaluated using gamma passing rates with a 2%/2 mm criterion and dose profile comparisons., Results: Agreement between the measurements and AAA calculations decreased as tumor size decreased, but Acuros XB showed better agreement for all tumor sizes. The largest difference was observed for a 6 MV volumetric modulated arc therapy plan created to treat the smallest tumor. The gamma passing rate was 89.7% but that of Acuros was 99.5%. For the tumor regression evaluation, the gamma passing rates ranged from 53% to 99% for AAA. For Acuros XB, the gamma passing rates were >98% for all scenarios., Conclusion: Both AAA and Acuros XB calculated the dose accurately for the largest lung tumor. For the smallest and regressing tumors, Acuros XB more accurately modelled the dose distribution compared with AAA., (Copyright © 2018 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.)

Purpose: Cholangiocarcinoma patients who are potential candidates for liver transplantation may be treated with high-dose-rate (HDR) brachytherapy using a minimally invasive nasobiliary catheter in an effort to escalate the radiotherapy dose to the tumor and maximize local control rates. This work describes the equipment, procedures, and quality assurance (QA) that enables successful administration., Methods and Materials: This work describes the nasobiliary catheter placement, simulation, treatment planning, treatment delivery, and QA. In addition, a chart review was performed of all patients who received endoscopic retrograde cholangiopancreatography for HDR bile duct brachytherapy at our institution from 2007 to 2017. The review evaluated how many patients were treated and the number of patients who could not be treated because of anatomic and/or equipment limitations., Results: From 2007 to 2017, 122 cholangiocarcinoma patients have been treated with HDR brachytherapy using a nasobiliary catheter. Three patients underwent catheter placement but did not receive brachytherapy treatment due to catheter migration between placement and treatment or because the HDR afterloader was unable to extend the source wire into the treatment site. Periodic QA is recommended for ensuring whether the HDR afterloader is capable of extending the source wire through an extensive and curved path., Conclusions: Intraluminal HDR brachytherapy with a nasobiliary catheter can be successfully administered. Procedures and QA are described for ensuring safety and overcoming technical challenges., (Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.)

Purpose: To describe the design and clinical use of a rotational phantom for dosimetric verification of IMRT/VMAT treatment plans using radiochromic film., Methods: A solid water cylindrical phantom was designed with separable upper and lower halves and rests on plastic bearings allowing for 360° rotation about its central axis. The phantom accommodates a half sheet of radiochromic film, and by rotating the cylinder, the film can be placed in any plane between coronal and sagittal. Calculated dose planes coinciding with rotated film measurements are exported by rotating the CT image and dose distribution within the treatment planning system. The process is illustrated with 2 rotated film measurements of an SRS treatment plan involving 4 separate targets. Additionally, 276 patient specific QA measurements were obtained with the phantom and analyzed with a 2%/2 mm gamma criterion., Results: The average 2%/2 mm gamma passing rate for all 276 plans was 99.3%. Seventy-two of the 276 plans were measured with the plane of the film rotated between the coronal and sagittal planes and had an average passing rate of 99.4%., Conclusions: The rotational phantom allows for accurate film measurements in any plane. With this technique, regions of a dose distribution which might otherwise require multiple sagittal or coronal measurements can be verified with as few as a single measurement. This increases efficiency and, in combination with the high spatial resolution inherent to film dosimetry, makes the rotational technique an attractive option for patient-specific QA., (Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

Purpose: The purpose of this study was to demonstrate an objective quality control framework for the image review process., Methods and Materials: A total of 927 cone-beam computed tomography (CBCT) registrations were retrospectively analyzed for 33 bilateral head and neck cancer patients who received definitive radiotherapy. Two registration tracking volumes (RTVs) - cervical spine (C-spine) and mandible - were defined, within which a similarity metric was calculated and used as a registration quality tracking metric over the course of treatment. First, sensitivity to large misregistrations was analyzed for normalized cross-correlation (NCC) and mutual information (MI) in the context of statistical analysis. The distribution of metrics was obtained for displacements that varied according to a normal distribution with standard deviation of σ = 2 mm, and the detectability of displacements greater than 5 mm was investigated. Then, similarity metric control charts were created using a statistical process control (SPC) framework to objectively monitor the image registration and review process. Patient-specific control charts were created using NCC values from the first five fractions to set a patient-specific process capability limit. Population control charts were created using the average of the first five NCC values for all patients in the study. For each patient, the similarity metrics were calculated as a function of unidirectional translation, referred to as the effective displacement. Patient-specific action limits corresponding to 5 mm effective displacements were defined. Furthermore, effective displacements of the ten registrations with the lowest similarity metrics were compared with a three dimensional (3DoF) couch displacement required to align the anatomical landmarks., Results: Normalized cross-correlation identified suboptimal registrations more effectively than MI within the framework of SPC. Deviations greater than 5 mm were detected at 2.8σ and 2.1σ from the mean for NCC and MI, respectively. Patient-specific control charts using NCC evaluated daily variation and identified statistically significant deviations. This study also showed that subjective evaluations of the images were not always consistent. Population control charts identified a patient whose tracking metrics were significantly lower than those of other patients. The patient-specific action limits identified registrations that warranted immediate evaluation by an expert. When effective displacements in the anterior-posterior direction were compared to 3DoF couch displacements, the agreement was ±1 mm for seven of 10 patients for both C-spine and mandible RTVs., Conclusions: Qualitative review alone of IGRT images can result in inconsistent feedback to the IGRT process. Registration tracking using NCC objectively identifies statistically significant deviations. When used in conjunction with the current image review process, this tool can assist in improving the safety and consistency of the IGRT process., (© 2018 American Association of Physicists in Medicine.)

Physicians performing x-ray guided interventional procedures have a keen interest in radiation safety. Radiation dose to tissues and organs of the head and neck are of particular interest because they are not routinely protected by wearable radiation safety devices. This study was conducted to facilitate estimation of radiation dose to tissues of the head and neck of interventional physicians based on the dose recorded by a personal dosimeter worn on the left collar. Scatter beam qualities maximum energy and HVL were measured for 40 scatter beams emitting from an anthropomorphic patient phantom. Variables of the scatter beams included scatter angle (35° and 90°), primary beam peak tube potential (60, 80, 100, and 120 kVp), and 5 Cu spectral filter thicknesses (0-0.9 mm). Four reference scatter beam qualities were selected to represent the range of scatter beams realized in a typical practice. A general radiographic x-ray tube was tuned to produce scatter-equivalent radiographic beams and used to simultaneously expose the head and neck of an anthropomorphic operator phantom and radiochromic film. The geometric relationship between the x-ray source of the scatter-equivalent beams and the operator phantom was set to mimic that between a patient and physician performing an invasive cardiovascular procedure. Dose to the exterior surface of the operator phantom was measured with both 3 × 3 cm 2 pieces of film and personal dosimeters positioned at the location of the left collar. All films were scanned with a calibrated flatbed scanner, which converted the film's reflective density to dose. Films from the transverse planes of the operator phantom provided 2D maps of the dose distribution within the phantom. These dose maps were normalized by the dose at the left collar, providing 2D percent of left collar dose (LCD) maps. The percent LCD maps were overlain with bony anatomy CT images of the operator phantom and estimates of percent LCD to the left, right and whole brain, brain stem, lenses of the eyes, and carotid arteries were calculated. Per expectation, results indicated greater percent dose to superficial versus deep tissues and increasing percent dose to deep tissues with increasing scatter-equivalent beam energy and HVL. The results enable estimation of the scatter dose to tissues of the head and neck of interventional physicians based on occupational dose measured by a personal dosimeter worn at the collar outside the protective apron.

Metal implants which saturate the CT number scale may require dosimetrist and physicist involvement to manually contour and assign an appropriate value to the metal for accurate dose calculation. This study investigated dose calculation based directly on extended CT scale images for different metals and geometries. The aim was to evaluate extended CT accuracy as a suitable alternative to standard CT methods in the presence of high-Z materials and artifacts, despite the reduced HU resolution of extended CT. Gafchromic film measurements were made for comparison to calculated doses. The method of direct dose calculation on extended CT scale was compared to our institution's standard method of manually contouring and assigning metal values on saturated CT images for each of the metal samples. Clinical patient plans with metal implants were investigated and DVHs were compared between standard CT and extended CT dose calculations. Dose calculations showed agreement within 2% between the two methods of metal characterization and the film measurement in the case of the strongest metal attenuator, cobalt-chromium. In the clinical treatment plans, the greatest dose discrepancy between the two methods was 1.2%. This study suggests that direct dose calculation on an extended scale CT image in the presence of metal implants can produce accurate clinically viable treatment plans, thereby improving efficiency of clinical workflow and eliminating a potential source of human error by manual CT number assignment., (© 2016 The Authors.)

Purpose: To assess the accuracy of the Eclipse Analytical Anisotropic Algorithm when calculating dose for spine stereotactic body radiation therapy treatments involving surgically implanted titanium hardware., Methods and Materials: A human spine was removed from a cadaver, cut sagittally along the midline, and then separated into thoracic and lumbar sections. The thoracic section was implanted with titanium stabilization hardware; the lumbar section was not implanted. Spine sections were secured in a water phantom and simulated for treatment planning using both standard and extended computed tomography (CT) scales. Target volumes were created on both spine sections. Dose calculations were performed using (1) the standard CT scale with relative electron density (RED) override of image artifacts and hardware, (2) the extended CT scale with RED override of image artifacts only, and (3) the standard CT scale with no RED overrides for hardware or artifacts. Plans were delivered with volumetric modulated arc therapy using a 6-MV beam with and without a flattening filter. A total of 3 measurements for each plan were made with Gafchromic film placed between the spine sections and compared with Eclipse dose calculations using gamma analysis with a 2%/2 mm passing criteria. A single measurement in a homogeneous phantom was made for each plan before actual delivery., Results: Gamma passing rates for measurements in the homogeneous phantom were 99.6% or greater. Passing rates for measurements made in the lumbar spine section without hardware were 99.3% or greater; measurements made in the thoracic spine containing titanium were 98.6 to 99.5%., Conclusions: Eclipse Analytical Anisotropic Algorithm can adequately model the effects of titanium implants for spine stereotactic body radiation therapy treatments using volumetric modulated arc therapy. Calculations with standard or extended CT scales give similarly accurate results., (Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.)

Purpose: The oligometastatic state is an intermediate state between a malignancy that can be completely eradicated with conventional modalities and one in which a palliative approach is undertaken. Clinically, high rates of local tumor control are possible with stereotactic ablative radiation therapy (SABR), using precisely targeted, high-dose, low-fraction radiation therapy. However, in oligometastatic melanoma, virtually all patients develop progression systemically at sites not initially treated with ablative radiation therapy that cannot be managed with conventional chemotherapy and immunotherapy. We have demonstrated in mice that intravenous administration of vesicular stomatitis virus (VSV) expressing defined tumor-associated antigens (TAAs) generates systemic immune responses capable of clearing established tumors. Therefore, in the present preclinical study, we tested whether the combination of systemic VSV-mediated antigen delivery and SABR would be effective against oligometastatic disease., Methods and Materials: We generated a model of oligometastatic melanoma in C57BL/6 immunocompetent mice and then used a combination of SABR and systemically administered VSV-TAA viral immunotherapy to treat both local and systemic disease., Results: Our data showed that SABR generates excellent control or cure of local, clinically detectable, and accessible tumor through direct cell ablation. Also, the immunotherapeutic activity of systemically administered VSV-TAA generated T-cell responses that cleared subclinical metastatic tumors. We also showed that SABR induced weak T-cell-mediated tumor responses, which, particularly if boosted by VSV-TAA, might contribute to control of local and systemic disease. In addition, VSV-TAA therapy alone had significant effects on control of both local and metastatic tumors., Conclusions: We have shown in the present preliminary murine study using a single tumor model that this approach represents an effective, complementary combination therapy model that addresses the need for both systemic and local control in oligometastatic melanoma., (Copyright © 2015. Published by Elsevier Inc.)

Purpose: To assess the dosimetric accuracy and energy dependence of the new EBT-eXtended Dose (XD) Gafchromic film and to compare the lateral response artifact (LRA) between EBT-XD and EBT3 film., Methods: EBT3 and EBT-XD calibration curves were created by exposing films to known doses from 0 to 3000 cGy using a 6 MV beam. To assess the accuracy and dynamic range of EBT-XD, a 60° enhanced dynamic wedge (EDW) was used to deliver a dose range of approximately 200-2900 cGy. Comparison to treatment planning system (TPS) calculation was made using a gamma analysis with 2%/2 mm passing criteria. To assess and compare the LRA between EBT3 and EBT-XD, 21 × 21 cm(2) open fields delivered doses of 1000, 2000, and 3000 cGy to both types of film. Films were placed at the center of the scanner, and ratios of measured to TPS predicted doses were calculated at 50 and 80 mm lateral from the scanner center in order to quantitatively assess the LRA. To evaluate the energy dependence of EBT-XD film, seven known doses ranging from 400 to 3000 cGy were delivered using both 6 and 18 MV beams and the resulting optical densities (ODs) compared., Results: The gamma passing rate was 99.1% for the 6 MV EDW delivery. EBT-XD film exhibited minimal LRA (<1%) up to 3000 cGy. In contrast, EBT3 demonstrated an under-response of 11.3% and 22.7% at lateral positions of 50 and 80 mm, respectively, for the 3000 cGy exposure. Differences between ODs of the EBT-XD films exposed to known doses from 6 to 18 MV beams were <0.8% suggesting minimal energy dependence throughout this energy range., Conclusions: The LRA of EBT-XD is greatly reduced when compared to EBT3. This in combination with its accuracy from 0 to 3000 cGy and minimal energy dependence from 6 to 18 MV makes EBT-XD film well suited for dosimetric measurements in high dose SRS/SBRT applications.

We investigated the influence of PD-1 expression on the systemic antitumor response (abscopal effect) induced by stereotactic ablative radiotherapy (SABR) in preclinical melanoma and renal cell carcinoma models. We compared the SABR-induced antitumor response in PD-1-expressing wild-type (WT) and PD-1-deficient knockout (KO) mice and found that PD-1 expression compromises the survival of tumor-bearing mice treated with SABR. None of the PD-1 WT mice survived beyond 25 days, whereas 20% of the PD-1 KO mice survived beyond 40 days. Similarly, PD-1-blocking antibody in WT mice was able to recapitulate SABR-induced antitumor responses observed in PD-1 KO mice and led to increased survival. The combination of SABR plus PD-1 blockade induced near complete regression of the irradiated primary tumor (synergistic effect), as opposed to SABR alone or SABR plus control antibody. The combination of SABR plus PD-1 blockade therapy elicited a 66% reduction in size of nonirradiated, secondary tumors outside the SABR radiation field (abscopal effect). The observed abscopal effect was tumor specific and was not dependent on tumor histology or host genetic background. The CD11a(high) CD8(+) T-cell phenotype identifies a tumor-reactive population, which was associated in frequency and function with a SABR-induced antitumor immune response in PD-1 KO mice. We conclude that SABR induces an abscopal tumor-specific immune response in both the irradiated and nonirradiated tumors, which is potentiated by PD-1 blockade. The combination of SABR and PD-1 blockade has the potential to translate into a potent immunotherapy strategy in the management of patients with metastatic cancer., (©2015 American Association for Cancer Research.)

Purpose: To separate the dosimetric consequences of changing tumor volume from positional uncertainty for patients undergoing conventionally fractionated lung radiation therapy (RT) and to quantify which factor has a larger impact on dose to target volumes and organs at risk (OAR)., Methods and Materials: Clinical treatment plans from 20 patients who had received conventionally fractionated RT were retrospectively altered by replacing tumor and atelectasis with lung equivalent tissue in the treatment planning system calculations. To simulate positional uncertainty, the isocenter was shifted in both the altered and original plans by 2 and 5 mm in 6 directions. Rotational uncertainty was introduced by rotating each computed tomographic image set by ± 3 degrees about a superior-inferior axis extending through patient center. Additionally, after rotation the isocenter was translated back to its original point within the patient to evaluate whether purely translational corrections could minimize dosimetric consequences due to rotations., Results: Dosimetric statistics for each altered plan were compared with the original. Average changes in the planning target volume (PTV) receiving 95% of prescription dose (PTV V95%) resulting from changing tumor anatomy alone were approximately 0.1%. Average changes in PTV V95% resulting from positional uncertainty were greater (0.2%-4.2%) but were largely independent of whether or not the original tumor volume was present. For 3 patients, increases in volumes receiving 110% of the prescription dose were seen but were largely limited to within the PTV. Translational corrections for patient rotations were effective in minimizing differences in target coverage but had less effect on reducing the maximum spinal cord dose., Conclusions: Anatomic changes alone, such as reductions in tumor volume and atelectasis, had minimal effect on the overall dose distribution. Greater dosimetric consequences were seen with positional uncertainty. With accurate patient localization, replanning during the course of treatment for conventionally fractionated lung cancer patients may not be necessary.

Purpose: To describe the design and dosimetric characterization of a simple and economical small animal irradiator., Materials and Methods: A high dose rate (HDR) (192)Ir brachytherapy source from a commercially available afterloader was used with a 1.3 cm thick tungsten collimator to provide sharp beam penumbra suitable for hemi-brain irradiation of mice. The unit was equipped with continuous gas anesthesia to allow robust animal immobilization. Dosimetric characterization of the device was performed with Gafchromic film measurements., Results: The tungsten collimator provided a sharp penumbra suitable for hemi-brain irradiation, and dose rates on the order of 200 cGy/minute were achieved. The sharpness of the penumbra attainable with this device compares favorably to those measured experimentally for 6 MV photons, and 6 and 20 MeV electron beams from a linear accelerator, and was comparable to those measured for a 300 kVp orthovoltage beam and a Monte Carlo simulated 90 MeV proton beam., Conclusions: Due to its simplicity and low cost, the apparatus described is an attractive alternative for small animal irradiation experiments requiring steep dose gradients.

Background. Radiotherapy has been utilized for metastatic and recurrent osteosarcoma and Ewing sarcoma (ES), in order to provide palliation and possibly prolong overall or progression-free survival. Stereotactic body radiotherapy (SBRT) is convenient for patients and offers the possibility of increased efficacy. We report our early institutional experience using SBRT for recurrent and metastatic osteosarcoma and Ewing sarcoma. Methods. We reviewed all cases of osteosarcoma or ES treated with SBRT between 2008 and 2012. Results. We identified 14 patients with a total of 27 lesions from osteosarcoma (n = 19) or ES (n = 8). The median total curative/definitive SBRT dose delivered was 40 Gy in 5 fractions (range, 30-60 Gy in 3-10 fractions). The median total palliative SBRT dose delivered was 40 Gy in 5 fractions (range, 16-50 Gy in 1-10 fractions). Two grade 2 and 1 grade 3 late toxicities occurred, consisting of myonecrosis, avascular necrosis with pathologic fracture, and sacral plexopathy. Toxicity was seen in the settings of concurrent chemotherapy and reirradiation. Conclusions. This descriptive report suggests that SBRT may be a feasible local treatment option for patients with osteosarcoma and ES. However, significant toxicity can result, and thus systematic study is warranted to clarify efficacy and characterize long-term toxicity.

Purpose: To evaluate the dependence of an automatic match process on the size of the user-defined region of interest (ROI), the structure volume of interest (VOI), and changes in tumor volume when using cone-beam computed tomography (CBCT) for tumor localization and to compare these results with a gold standard defined by a physician's manual match., Methods and Materials: Daily CBCT images for 11 patients with lung cancer treated with conventionally fractionated radiation therapy were retrospectively matched to a reference CT image using the Varian On Board Imager software (Varian, Palo Alto, CA) and a 3-step automatic matching protocol. Matches were performed with 3 ROI sizes (small, medium, large), with and without a structure VOI (internal target volume [ITV] or planning target volume [PTV]) used in the last step. Additionally, matches were performed using an intensity range that isolated the bony anatomy of the spinal column. All automatic matches were compared with a manual match made by a physician., Results: The CBCT images from 109 fractions were analyzed. Automatic match results depend on ROI size and the structure VOI. Compared with the physician's manual match, automatic matches using the PTV as the structure VOI and a small ROI resulted in differences ≥ 5 mm in 1.8% of comparisons. Automatic matches using no VOI and a large ROI differed by ≥ 5 mm in 30.3% of comparisons. Differences between manual and automatic matches using the ITV as the structure VOI increased as tumor size decreased during the treatment course., Conclusions: Users of automatic matching techniques should carefully consider how user-defined parameters affect tumor localization. Automatic matches using the PTV as the structure VOI and a small ROI were most consistent with a physician's manual match, and were independent of volumetric tumor changes., (Copyright © 2014 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.)

Background: Delineation of glioma extent for surgical or radiotherapy planning is routinely based on MRI. There is increasing awareness that contrast enhancement on T1-weighted images (T1-CE) may not reflect the entire extent of disease. The amino acid tracer (18)F-DOPA (3,4-dihydroxy-6-[18F] fluoro-l-phenylalanine) has a high tumor-to-background signal and high sensitivity for glioma imaging. This study compares (18)F-DOPA PET against conventional MRI for neurosurgical biopsy targeting, resection planning, and radiotherapy target volume delineation., Methods: Conventional MR and (18)F-DOPA PET/CT images were acquired in 10 patients with suspected malignant brain tumors. One to 3 biopsy locations per patient were chosen in regions of concordant and discordant (18)F-DOPA uptake and MR contrast enhancement. Histopathology was reviewed on 23 biopsies. (18)F-DOPA PET was quantified using standardized uptake values (SUV) and tumor-to-normal hemispheric tissue (T/N) ratios., Results: Pathologic review confirmed glioma in 22 of 23 biopsy specimens. Thirteen of 16 high-grade biopsy specimens were obtained from regions of elevated (18)F-DOPA uptake, while T1-CE was present in only 6 of those 16 samples. Optimal (18)F-DOPA PET thresholds corresponding to high-grade disease based on histopathology were calculated as T/N > 2.0. In every patient, (18)F-DOPA uptake regions with T/N > 2.0 extended beyond T1-CE up to a maximum of 3.5 cm. SUV was found to correlate with grade and cellularity., Conclusions: (18)F-DOPA PET SUV(max) may more accurately identify regions of higher-grade/higher-density disease in patients with astrocytomas and will have utility in guiding stereotactic biopsy selection. Using SUV-based thresholds to define high-grade portions of disease may be valuable in delineating radiotherapy boost volumes.