Search

Summary: Monoterpenes are the most prevalent compounds found in essential oils. They exhibit inhibitory actions against phytopathogenic postharvest fungi. Direct application limits their effectiveness due to their instability, high volatility, hydrophobicity and susceptibility to degradation. Encapsulation systems using metal–organic frameworks (MOFs) have been developed to maximise their use. In this study, four protocols were shown to encapsulate thymol and limonene in porous solids, such as ZIF‐8, UiO‐66‐(COOH)2 and zeolite 13X. Vapourisation and diffusion at 60 °C for 16 h was found to be the most efficient encapsulation process. A larger amount of thymol than limonene was loaded in the porous solids. Thymol released from MOFs slowed down the growth of Colletotrichum musae by up to 6 days at 25 °C. There was a sustained release of thymol even beyond the period of maximum fungal growth. This proof‐of‐concept study revealed the potential utility of MOFs as carriers of thymol against postharvest fungi. [ABSTRACT FROM AUTHOR]

Summary: Soumbala is made from African locust bean seeds (Parkia biglobosa), a legume widely spread in west Africa. It is a lipid and protein‐rich condiment obtained by three main steps: cooking, fermentation and drying. Ten different analysis were made on AFLBS samples at each step with a particular focus on protein and lipid fates. Results showed that cooking decreased markedly the carbohydrate content leaving mainly proteins and lipids as substrates for fermentation. During this step, 20% of the proteins were converted into free amino acids, mainly glutamic acid and tyrosine. Significant biogenic amines release occurred and reached 50 mg per 100 g of dried ALBS. Di‐glycerides and fatty acids increased markedly and represented 11% and 7% of the total lipids of dried ALBS. These results give a complete view of the nutritional characteristics of dried ALBS, its benefit but also its defects that arise during fermentation and not suppressed by the subsequent processing steps. [ABSTRACT FROM AUTHOR]

Seeds of Parkia biglobosa, also called African locust bean seeds (ALBSs), are used to produce a condiment by subjecting them to cooking, alkaline fermentation, and drying. The objective of this work was to monitor the evolution of the composition of ALBS during spontaneous fermentation. Results showed that the seeds at initial time contained mainly proteins (45%) and lipids (36%). During fermentation, the conversion of this initial composition took place to produce ammonium, free amino acids, and short‐chain fatty acids (SCFAs) that accounted for 2%, 10%, and 1.5% dry basis, respectively, which explains the typical flavor of fermented ALBS. This release was also concomitant with biogenic amine production. Along with ammonium and SCFA release, pyrazines were the major volatile organic compounds. Composition modulation was well represented by a Verhulst equation in which the dynamic could be modified by the initial composition of the seed, the pre‐cooking step, and the fermentation conditions (temperature and aeration). Practical applications: For nutritional and sustainability reasons, re‐integration of vegetable in general and legumes, in particular in our diet, is a current trend. However, only dish that are appealing to consumers are concretely adopted. Fermentation of legumes is interesting in more than one way. It does not involve heat, so thermolabile molecules can be preserved and the financial and energetic costs are low. Biological interesting molecules are produced from the metabolism of microorganisms, and among them, volatile organic compounds that contribute to enhance the flavor of legume dishes. Soumbala is a meal and/or condiment obtained from the fermentation of African locust bean (Parkia biglobosa) seeds (ALBSs), a legume widely spread in west Africa. The final typical sensory properties are known to be due to the alkaline fermentation step by Bacillus species. This paper presents the kinetics of release of various compounds during spontaneous fermentation that may impact the sensory and nutritional properties of the final product. More precisely, the dynamic of the production of free amino acids, free fatty acids, volatile compounds, and biogenic amines are presented and discussed to give insights into the succession of important reactions to control the sensory and nutritional qualities of fermented ALBS (FALBS). This paper shows that further research are necessary to better understand and control the quality of not only FALBS but also similar protein‐rich legumes to modulate the quality of the final products. [ABSTRACT FROM AUTHOR]

Mango fruit ( Mangifera indica L.) is highly perishable and must therefore be quickly stabilized. Drying appears to be one of the most promising stabilization solutions. The traditional mango drying process can be divided into two phases: the first, which is performed at ~80 °C for 10 to 12 h, sees water activity ( a) decline from 0.98 to 0.8. During the second phase, the drying temperature is reduced to 50 °C until a reaches ~0.6. These conditions are highly favorable to enzymatic and non-enzymatic reactions (1st and 2nd step, respectively). The focus of this work was therefore to highlight the effects resulting from the coupling of a and temperature on the development of these classes of reactions during the whole process. Several precursors (reducing sugars and amino acids) and intermediary products of the Maillard reaction were analyzed to estimate non-enzymatic reaction intensity when polyphenoloxidase (PPO) was associated with enzymatic browning. We were able to show that the highest production of 5-hydroxymethyl furfural (5-HMF) as a Maillard reaction marker occurs mainly for an a of 0.6. Kinetic analysis of Maillard reaction precursors and intermediate products in model mango system helped us identify asparagine and arginine as limiting precursors, and 5-HMF as a significant a-dependent product. The impact of the a on the thermal degradation of PPO proved to be radically different. After 8 h at 40 °C, the PPO was almost totally inhibited if this treatment is conducted on a sample at a 0.65, while residual activity was estimated to be 69.4 % for a sample at a 0.98. [ABSTRACT FROM AUTHOR]

The aromatic quality of chocolate requires the use of cocoa with high aromatic potential, this being acquired during the fermentation of cocoa beans. Traditional fermentation is still often carried out on a small scale with wild strains of yeasts and acetic bacteria and under poorly controlled conditions leading to cocoa quality ranging from best to worst. This study is the first part of a project aiming to control quality of cocoa to produce high aromatic quality chocolate by using a mixed starter of selected strains of yeast and acetic bacteria and by controlling the conditions of fermentation. To achieve this objective, a mathematical model of the alcoholic fermentation of cocoa beans has been developed. The growth, glucose consumption and ethanol production of Saccharomyces cerevisiae LM strain in synthetic broth were modeled for the most important intrinsic (pH, glucose, ethanol, free nitrogen and oxygen levels) and extrinsic (temperature, oxygen level) fermentation parameters. The model was developed by combining the effects of individual conditions in a multiplicative way using the gamma concept. The model was validated in liquid synthetic medium at two different inoculation levels 104 and 106 CFU/mL with an increase in temperature that recorded during spontaneous fermentations. The model clearly shows that the level of inoculation and the speed of the increase in temperature clearly drive yeast growth, while other factors including pH and ethanol, free nitrogen and oxygen levels have no significant impact on yeast growth. • A mechanistic model predicts yeast growth in the conditions of cocoa fermentation. • A model was developed for alcoholic fermentation of cocoa pulp based on the gamma concept. • The level of inoculation and the speed of the increase in temperature clearly drive yeast growth. • The model is a tool to define the inoculation level of yeast for cocoa fermentation. [ABSTRACT FROM AUTHOR]

Durum wheat grains are used for producing food, such as pasta or couscous. The grain mechanical properties which are linked to its internal micro-structure (i.e. endosperm porosity) are known to determine its ability to produce semolina during milling. The proportion of grains having porous endosperm in a batch appears therefore as a critical quality factor for the durum wheat value chain. Our objective was to investigate the ability of X-ray micro-tomography (μCT) method to describe the porous or vitreous counterpart structures in the endosperm of durum wheat grains. We selected two different durum wheat samples displaying vitreous or partially porous endosperms. The grains were analyzed using μCT at two pixel sizes (1 μm or 7 μm). The μCT data collected at 7 μm pixel size were used for qualitative classification of grains according to apparent distribution curve of the porosity parameters. Analysis of μCT images at 1 μm pixel size allowed us to propose pore size classification in the vitreous and porous parts of the endosperm in three durum wheat grain. Results are used to better describe the durum-wheat endosperm microstructure, but requires long scanning periods. Image 1 • μCT was used to describe the internal microstructure of durum wheat grains endosperm. • μCT at 7 μm pixel size allowed qualitative discrimination of grains according to vitreousness. • μCT at 1 μm pixel size allowed describing distribution of internal porosity in the endosperm. • Porosity characteristics can be used to describe the dense and porous structures. [ABSTRACT FROM AUTHOR]

This paper describes a mixed fermentation model made by assembling block hosting models for the growth of lactic acid bacteria (Lactobacillus plantarum) and a yeast strain (Pichia kluyveri), metabolic production and the physical-chemical changes which occur during the fermentation of gowé. The growth model for P. kluyveri was developed on a synthetic medium following the gamma concept taking into account the effect of pH, temperature, concentrations in glucose, lactic acid and ethanol. Additional parameters for the previously defined L. plantarum growth model were also determined (glucose and ethanol concentrations). The model was validated in three different gowé processing conditions. Even if the model underestimates LAB growth, it explains what occurs in the product and enables in silico extrapolation to various fermentation conditions. The predicted hydrolysis rates of native and gelatinised starches showed that increasing malt content is not an efficient way to increase the sweetness of gowé in contrast to increasing the level of pre-cooking. The builing-block model developed in this study could be applied to many other fermented foods and particularly to non-alcoholic but acid and sweet cereal based beverages. • The gamma parameters for the growth of Pichia kluyveri were determined. • The simultaneous growth of P. kluyveri and Lb. plantarum was modelled. • Both strains compete for glucose that depends of amylolysis of gelatinized starch. • The developed global model allows optimizing rapidly the fermentation conditions. [ABSTRACT FROM AUTHOR]

Kitoza samples collected from producers in Madagascar were analyzed for their physicochemical and microbial properties. Lactic acid bacteria and coagulase‐negative staphylococci were the two codominant populations with average counts of 6–7 log cfu/g. Good hygienic practices were sometimes lacking but samples were not contaminated with Salmonella, Clostridium perfringens, and Bacillus cereus and only once with Listeria monocytogenes. Staphylococcus aureus was found occasionally with higher counts in salted/dried products than in salted/smoked products. Moisture, protein, fat, and salt contents varied considerably and were on average 41.5, 43.5, 14.3, and 3.3 g/100 g, respectively, and water activity was 0.893 on average. Smoked kitoza showed higher moisture content compared to dried kitoza. Most of the smoked kitoza had a water activity higher than 0.9 which is not in accordance with their storage at ambient temperatures. Benzo(a)pyrene content was above 2 µg/kg in 11 out of 30 smoked samples (17 ± 16.5 µg/kg on average). [ABSTRACT FROM AUTHOR]

Ablo is a rice or maize-based steam-cooked bread-like product, very popular in Benin, Togo and Ghana. This study optimized the processing steps of rice ablo using response surface methodology. The effect of precooking (proportions of flour and water, duration), kneading (wheat level, duration), fermentation (yeast level, temperature, duration) conditions to dough (gelatinization level, fluidity, proofing) and ablo (ethanol content, pH, density, cooking expansion, firmness, alveolar structure) properties were studied. It was demonstrated that ablo texture can be controlled by the fluidity of the fermented dough. Fluid fermented dough (at least 0.5 cm/s) expands adequately during steam-cooking and results in a less dense ablo in line with commonly consumed ablo. The optimal dough fluidity comes from a low gelatinization level of the precooked dough (less than 20%) and an intense fermentation (high yeast dose and long fermentation). Surprisingly, dough proofing appears to have no effect on final ablo expansion. [ABSTRACT FROM AUTHOR]

Gowé is an acidic beverage obtained after simultaneous saccharification and fermentation (SSF) of sorghum. A previous paper focused on modeling the growth of lactic acid bacteria during gowé processing. This paper focuses on modeling starch amylolysis to build an aggregated SSF model. The activity of α-amylase was modeled as a function of temperature and pH, and the hydrolysis rates of both native and soluble starch were modeled via a Michaelis-Menten equation taking into account the maltose and glucose inhibition constants. The robustness of the parameter estimators was ensured by step by step identification in sets of experiments conducted with different proportions of native and gelatinized starch by modifying the pre-cooking temperature. The aggregated model was validated on experimental data and showed that both the pre-cooking and fermentation parameters, particularly temperature, are significant levers for controlling not only acid and sugar contents but also the expected viscosity of the final product. This generic approach could be used as a tool to optimize the sanitary and sensory quality of fermentation of other starchy products. [ABSTRACT FROM AUTHOR]