308 results on '"Gowthaman, S."'
Search Results
2. Effect of ZnO nanoparticle on combustion and emission characteristics of a diesel engine powered by lemongrass biodiesel: an experimental approach
3. Bio-cementation of Demolition Wastes and Recycled Aggregates for Sustainable Production of Paving Blocks
4. Effect of Severe Plastic Deformation During Slot Milling on Nimonic 263 Surface Features
5. Impact of Atomic Void Clusters on the Tensile Behavior and its Features of Silicon Carbide Polycrystal through Molecular Dynamics Analysis
6. Analysis on the Impact of Creep Environment and Grain Size During Biaxial Creep Characterization on the Creep Features of Ferrosilicon Alloy: a Molecular Dynamics Study
7. Influence of Creep Conditions and Grain Size on the Creep Behavior of Nano-Twinned Silicon Carbide Polycrystal: A Molecular Dynamics Study
8. A Study on the Point Defect Effects on the Monolithic Silicon Carbide Tensile Features: A Molecular Dynamics Study
9. Characteristics strength of high-performance concrete with the interaction of silica fume and GGBS.
10. Extraction of transportation grade fuels from waste LDPE packaging polymers using catalytic pyrolysis
11. Performance, emission and combustion characteristics of a diesel engine fuelled with diesel/coconut shell oil blends
12. Effect of wetting and drying cycles on the durability of bio-cemented soil of expressway slope
13. Influence of cutting environment and machining parameters on the cutting force and surface roughness of slot milled Nimonic 263 alloy
14. A two-stage treatment process for the management of produced ammonium by-products in ureolytic bio-cementation process
15. Comparative Study on the Effect of Temperature, Pressure and Grain Size on the Creep Behavior of Monolithic Titanium Aluminide Alloy through Molecular Dynamics Simulation
16. Experimental investigation on elastic constants transformation on slot milled Nimonic263 alloy
17. Short beam shear behaviour of ZnO nanowire reinforced glass/epoxy composites
18. Impact of nano crack and loading direction on the tensile features of FeCr alloy: a molecular dynamics analysis
19. Impact of radial rake angle and machining constraints on the machining behavior and functionality of additive manufactured inconel 718 alloy
20. Influence of machining behavior on severe deformation and corrosion resistance of end milled Nimonic 263 alloy
21. Comparative study on the critical effect of radial rake angle and machining parameters on the formation of vibration amplitude during end milling of Nimonic 263
22. Effect of Point Defects on the Tensile and Thermal Characteristics of Nickel–Aluminum Nanowire through Molecular Dynamics
23. Influence of radial rake angle and cutting conditions on friction during end milling of Nimonic 263
24. Experimental Investigations on the Effect of Severe Plastic Deformation Through End Milling on X-Ray Peak Broadening and Microcrystalline Characteristics of Nimonic 263
25. Analysis the optimum inlet air temperature for controlling homogeneous charge compression ignition (HCCI) engine
26. Efficient integration of electrocoagulation treatment with the spray‐pyrolyzed activated carbon coating on stainless steel electrodes for textile effluent‐bath reuse with ease
27. Study on the influence of temperature and strain rate on the tensile behavior of Ti–5Mo–5Cu alloy biomaterial alloy: a molecular dynamics simulation
28. Evaluation of Tensile Properties of Natural Silk and Coir Fibers
29. A study on the compressive residual stress due to waterjet cavitation peening
30. Electrical Discharge Machining studies on Monel- Super Alloy
31. Effects of ZnO Nanowire and Silica Coatings on the Inter-yarn Friction and Ballistic Properties of Kevlar Fabrics
32. Evaluation of performances in DI Diesel engine with different split injection timings.
33. Evaluation of performances in DI Diesel engine with different split injection timings
34. Impact of point defects on the creep behavior of MgY Polycrystal:A molecular dynamics study
35. A review on mechanical and material characterisation through molecular dynamics using large-scale atomic/molecular massively parallel simulator (LAMMPS)
36. Effects of charge temperature and fuel injection pressure on HCCI engine
37. Design and Fabrication of Air Preheater for Diesel Engine
38. The Effect of Injection Pressure on Engine Performance While the Engine is Running on Electrolytically Generated Hydrogen Oxygen Mixture
39. Improved Methods for Thermal and Compression Testing of Carbon Foams
40. End-Potting Concept for Compression Testing of Open-Cell Carbon Foams
41. study on self-care practices among type ii diabetes patient attending a rural and urban health training center, Tamilnadu
42. Water attenuation enhances tribological damage resistance in laser peened steel
43. Effect of split injection in DI diesel engine with varying injection proportion
44. Study on the effect of temperature and strain rate on Ni2FeCrCuAl high entropy alloy: a molecular dynamics study
45. Comparative studies of variation in cutting conditions and cutter nomenclature on the surface morphology and the integrity of slot milled nimonic 263 alloy
46. Water Attenuation Enhances Tribological Damage Resistance in Laser Peened Steel
47. Influence of cutting environment and machining parameters on the cutting force and surface roughness of slot milled Nimonic 263 alloy
48. Comparative Study on the Effect of Temperature, Pressure and Grain Size on the Creep Behavior of Monolithic Titanium Aluminide Alloy through Molecular Dynamics Simulation
49. Experimental study on the surface and interface phenomenon changes by means of contact angle measurement on slot milled nimonic 263 alloy
50. Effect of severe plastic deformation during slot milling on wear resistance and surface characteristics of nimonic 263 alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.