Search

Background Intrasaccular flow-disrupting devices are a safe and effective treatment strategy for intracranial aneurysms. We utilized high-frequency optical coherence tomography (HF-OCT) and digital subtraction angiography (DSA) to evaluate SEAL Arc, a new intrasaccular device, and compare the findings with the well-established Woven EndoBridge (WEB) device in an animal model of saccular aneurysms. Methods In a rabbit model, elastase-induced aneurysms were treated with SEAL Arc (n=11) devices. HF-OCT and DSA were performed after implant and repeated after 12 weeks. Device protrusion and malapposition were assessed at implant time and scored on a binary system. Aneurysm occlusion was assessed at 12 weeks with the WEB Occlusion Scale and dichotomized to complete (A and B) or incomplete (C and D) occlusion. The percentage of neointimal coverage after 12 weeks was quantified using HF-OCT. We compared these data to previously published historical controls treated with the gold-standard WEB device (n=24) in the same model. Results Aneurysm size and device placement were not significantly different between the two groups. Complete occlusion was demonstrated in 80% of the SEAL Arc devices, which compared favorably to the 21% of the aneurysms treated with WEB devices (P=0.002). Neointimal coverage across SEAL Arc devices was 86±15% compared with 49±27% for WEB (P=0.001). Protruding devices had significantly less neointimal coverage (P<0.001) as did incompletely occluded aneurysms (P<0.001). Histologically, all aneurysms treated with SEAL Arc devices were completely healed. Conclusion Complete early aneurysm occlusion was frequently observed in the SEAL Arc treated aneurysms, with significant neointimal coverage after 12 weeks. [ABSTRACT FROM AUTHOR]

Flow-diverting stents (FDs) for the treatment of cerebrovascular aneurysms are revolutionary. However, these devices require systemic dual antiplatelet therapy (DAPT) to reduce thromboembolic complications. Given the risk of ischemic complications as well as morbidity and contraindications associated with DAPT, demonstrating safety and efficacy for FDs either without DAPT or reducing the duration of DAPT is a priority. The former may be achieved by surface modifications that decrease device thrombogenicity, and the latter by using coatings that expedite endothelial growth. Biomimetics, commonly achieved by grafting hydrophilic and non-interacting polymers to surfaces, can mask the device surface with nature-derived coatings from circulating factors that normally activate coagulation and inflammation. One strategy is to mimic the surfaces of innocuous circulatory system components. Phosphorylcholine and glycan coatings are naturally inspired and present on the surface of all eukaryotic cell membranes. Another strategy involves linking synthetic biocompatible polymer brushes to the surface of a device that disrupts normal interaction with circulating proteins and cells. Finally, drug immobilization can also impart antithrombotic effects that counteract normal foreign body reactions in the circulatory system without systemic effects. Heparin coatings have been explored since the 1960s and used on a variety of blood contacting surfaces. This concept is now being explored for neurovascular devices. Coatings that improve endothelialization are not as clinically mature as anti-thrombogenic coatings. Coronary stents have used an anti-CD34 antibody coating to capture circulating endothelial progenitor cells on the surface, potentially accelerating endothelial integration. Similarly, coatings with CD31 analogs are being explored for neurovascular implants. [ABSTRACT FROM AUTHOR]

Background Flow diverters carry the risk of thromboembolic complications (TEC). We tested a coating with covalently bound heparin that activates antithrombin to address TEC by locally downregulating the coagulation cascade. We hypothesized that the neuroimaging evidence of TEC would be reduced by the coating. Methods 16 dogs were implanted with overlapping flow diverters in the basilar artery, separated into two groups: heparin-coated (n=9) and uncoated (n=7). Following implantation, high-frequency optical coherence tomography (HF-OCT) was acquired to quantify acute thrombus (AT) formation on the flow diverters. MRI was performed postoperatively and repeated at 1, 2, 3, 4, and 8 weeks, consisting of T1-weighted imaging, time-0f-flight (ToF), diffusion weighted imaging (DWI), susceptibility weighted imaging (SWI), and fluid attenuated inversion recovery (FLAIR) sequences. Neurological examinations were performed throughout the 8-week duration of the study. Results The mean AT volume on coated devices was lower than uncoated (0.014 vs 0.018 mm³); however, this was not significant (P=0.3). The mean number of foci of magnetic susceptibility artifacts (MSAs) on SWI was significantly different between the uncoated and coated groups at the 1-week follow-up (P<0.02), and remained statistically different throughout the duration of the study. The AT volume showed a direct linear correlation with the MSA count and 80% of the variance in the MSA could be explained by the AT volume (P<0.001). Pathological analysis showed evidence of ischemic injury at locations of MSA. Conclusions Heparin-coated flow diverters significantly reduced the number of new MSAs after 1 week follow-up, showing the potential to reduce TEC. [ABSTRACT FROM AUTHOR]

Background Flow diversion has become a standard treatment for cerebral aneurysms. However, major drawbacks include the need for dual antiplatelet therapy after implant and delayed complete occlusion of the aneurysm, which occurs when new tissue growth excludes the aneurysm from the parent artery. Biomimetic surface modifications such as the phosphorylcholine polymer (Shield surface modification) represent major advances in reducing thrombogenicity of these devices. However, in vitro studies have raised concerns that this modification may also delay endothelialization of flow diverters. Methods Bare metal Pipeline, Pipeline Shield, and Vantage with Shield devices were implanted in the common carotid arteries (CCAs) of 10 rabbits (two in the left CCA, one in the right CCA). Following implant and at 5, 10, 15, and 30 days, the devices were imaged with high-frequency optical coherence tomography and conventional angiography to evaluate tissue growth. At 30 days the devices were explanted and their endothelial growth was assessed with scanning electron microscopy (SEM) at five locations along their length using a semiquantitative score. Results The average tissue growth thickness (ATGT) was not different between the three devices. Neointima was apparent at 5 days and all devices demonstrated similar ATGT at each time point. On SEM, no difference was found in the endothelium scores between the device types. Conclusion In vivo, neither the Shield surface modification nor the device design (Vantage) altered the longitudinal healing of the flow diverter. [ABSTRACT FROM AUTHOR]

Background Mechanical thrombectomy (MT) has become standard for large vessel occlusions, but rates of complete recanalization are suboptimal. Previous reports correlated radiographic signs with clot composition and a better response to specific techniques. Therefore, understanding clot composition may allow improved outcomes. Methods Clinical, imaging, and clot data from patients enrolled in the STRIP Registry from September 2016 to September 2020 were analyzed. Samples were fixed in 10% phosphate-buffered formalin and stained with hematoxylin-eosin and Martius Scarlett Blue. Percent composition, richness, and gross appearance were evaluated. Outcome measures included the rate of first-pass effect (FPE, modified Thrombolysis in Cerebral Infarction 2c/3) and the number of passes. Results A total of 1430 patients of mean±SD age 68.4±13.5 years (median (IQR) baseline National Institutes of Health Stroke Scale score 17.2 (10.5-23), IV-tPA use 36%, stent-retrievers (SR) 27%, contact aspiration (CA) 27%, combined SR+CA 43%) were included. The median (IQR) number of passes was 1 (1-2). FPE was achieved in 39.3% of the cases. There was no association between percent histological composition or clot richness and FPE in the overall population. However, the combined technique resulted in lower FPE rates for red blood cell (RBC)-rich (P<0.0001), platelet-rich (P=0.003), and mixed (P<0.0001) clots. Fibrin-rich and platelet-rich clots required a higher number of passes than RBC-rich and mixed clots (median 2 and 1.5 vs 1, respectively; P=0.02). CA showed a trend towards a higher number of passes with fibrin-rich clots (2 vs 1; P=0.12). By gross appearance, mixed/heterogeneous clots had lower FPE rates than red and white clots. Conclusions Despite the lack of correlation between clot histology and FPE, our study adds to the growing evidence supporting the notion that clot composition influences recanalization treatment strategy outcomes. [ABSTRACT FROM AUTHOR]

Background The first-pass complete recanalization by mechanical thrombectomy (MT) for the treatment of stroke remains limited due to the poor integration of the clot within current devices. Aspiration can help retrieval of the main clot but fails to prevent secondary embolism in the distal arterial territory. The dense meshes of extracellular DNA, recently described in stroke-related clots, might serve as an anchoring platform for MT devices. We aimed to evaluate the potential of a DNA-reacting surface to aid the retention of both the main clot and small fragments within the thrombectomy device to improve the potential of MT procedures. Methods Device-suitable alloy samples were coated with 15 different compounds and put in contact with extracellular DNA or with human peripheral whole blood, to compare their binding to DNA versus blood elements in vitro. Clinical-grade MT devices were coated with two selected compounds and evaluated in functional bench tests to study clot retrieval efficacy and quantify distal emboli using an M1 occlusion model. Results Binding properties of samples coated with all compounds were increased for DNA (≈3-fold) and decreased (≈5-fold) for blood elements, as compared with the bare alloy samples in vitro. Functional testing showed that surface modification with DNA-binding compounds improved clot retrieval and significantly reduced distal emboli during experimental MT of large vessel occlusion in a three-dimensional model. Conclusion Our results suggest that clot retrieval devices coated with DNA-binding compounds can considerably improve the outcome of the MT procedures in stroke patients. [ABSTRACT FROM AUTHOR]

Background Preclinical testing of intracranial stents is currently performed in the peripheral circulation, and rarely in the basilar artery of the dog. Objective To test the feasibility of intracranial stenting in the middle cerebral artery (MCA) of the dog and explore the use of MRI to detect thromboembolic complications. Methods Six purpose-bred cross-hound dogs were used for proof-of-concept stenting of both MCAs in each animal. Immediately following the procedure, the animals were imaged with MRI. MRI was repeated weekly for 1 month. After the final angiography at 30 days, the animals were euthanized for pathological assessment of the stents and the brain. Results We successfully deployed 12 stents in the MCAs of all animals. We deployed three techniques for microcatheterization of the MCA--namely, directly through the internal carotid artery (ICA), using anastomotic arteries from the external carotid artery, or via the contralateral ICA through the anterior communicating artery. Two iatrogenic perforations of the ICA with formation of an arteriovenous fistula occurred, without clinical sequelae, which spontaneously resolved on follow-up. All animals tolerated the procedure and completed the follow-up surveillance. MRI revealed procedural thromboembolic induced areas of restricted diffusion, and only one instance of a delayed thromboembolic lesion during surveillance. At follow-up angiography, the devices were all patent. Conclusion We describe a new preclinical model of intracranial stenting in the MCA. Such a model may prove useful for evaluating new surface modifications. [ABSTRACT FROM AUTHOR]

Background High-frequency optical coherence tomography (HF-OCT) is an intravascular imaging method that allows for volumetric imaging of flow diverters in vivo. Objective To examine the hypothesis that a threshold for both volume and area of communicating malapposition can be predictive of early aneurysm occlusion. Methods Fifty-two rabbits underwent elastase aneurysm formation, followed by treatment with a flow diverter. At the time of implant, HF-OCT was acquired to study the rate and degree of communicating malapposition. Treated aneurysms were allowed to heal for either 90 or 180 days and euthanized following catheter angiography. Healing was dichotomized into aneurysm remnant or neck remnant/complete occlusion. Communicating malapposition was measured by HF-OCT using a semi-automatic algorithm able to detect any points where the flow diverter was more than 50 µm from the vessel wall. This was then summed across image slices to either a volume or area. Finally, a subsampled population was used to train a statistical classifier for the larger dataset. Results No difference in occlusion rate was found between device type or follow-up time (p=0.28 and p=0.67, respectively). Both volume and area of malapposition were significantly lower in aneurysms with a good outcome (p<0.001, both). From the statistical model, a volume of less than 0.56 mm3 or a normalized area less than 0.69 as quantified by HF-OCT was predictive of occlusion (p<0.001, each). Conclusions HF-OCT allows for measurements of both volume and area of malapposition and, from these measurements, an accurate prediction for early aneurysm occlusion can be made. [ABSTRACT FROM AUTHOR]

Background Super large-bore aspiration (SLBA) has shown high rates of complete clot ingestion. Objective To report the initial clinical feasibility, safety, and efficacy of this novel SLBA insert combination--super large-bore ingestion of clot (SLIC) technique for stroke. Methods We performed a retrospective review of three comprehensive stroke center databases. The SLIC technique entails a triaxial assembly of an 8 Fr 0.106" Base Camp catheter, 0.088" catheter extender (HiPoint), and an insert catheter (Tenzing 8) that completely consumes the inner diameter of the 0.088" SLBA catheter. The HiPoint catheter is delivered over the Tenzing 8 to the face of the embolus, which is withdrawn, while aspirating through the Base Camp and HiPoint catheters as a single assembly. Results Thirty-three consecutive patients with large vessel occlusion were treated with SLIC. The median age was 70 years (30-91) and 17 were male (51.5%). The median presenting National Institutes of Health Stroke Scale score and Alberta Stroke Program Early CT score was 21 (1-34) and 8 (5-10), respectively. There was 100% success in delivering the 0.088" catheter to the site of the occlusion. The successful revascularization rate (modified Thrombolysis in Cerebral Infarction (mTICI) score ≥2B) was 100% within a single pass in most cases (82%). Final mTICI ≥2C was achieved in 94.1% of occlusions, with 73.5% mTICI 3 recanalization. The rate of first pass effect in achieving excellent reperfusion (mTICI ≥2C) was 70.5%. There were no adverse events or postprocedural symptomatic hemorrhages. Conclusions Our initial experience with the SLIC technique resulted in achieving a first pass effect (mTICI ≥2C) in 70.5%. Navigation of the SLBA catheter extender over the Tenzing insert was successful and safe in this early experience. [ABSTRACT FROM AUTHOR]