Search

This paper is the first to define a conceptual design of a fusion power complex with hydrogen storage capability in a superconducting magnet system using cryogenic hydrogen. The fusion power complex realizes a carbon-neutral society by combining a large-capacity power source of renewable energy with the flexibility of energy output. Therefore, the proposed design is positioned as one of the most important next-generation power sources., source:https://doi.org/10.1585/pfr.18.1205001, identifier:0000-0002-1237-1963

Superconducting magnets in fusion reactors are subjected to a huge electromagnetic force of >100 MN/m. The magnets have to be sustained with a strong-body structure to avoid high stress and deformation. The total weight of the magnet system in the fusion reactor is estimated to be more than 20,000 tons. We applied topology optimization technique to the magnet support structure to reduce the weight of fusion reactors. Compared with the conventional design, we achieved a weight reduction of >25%. Static and seismic analyses were carried out to validate the soundness of the topology-optimized design. Consequently, the stress against the electromagnetic force in the structure was within the permissible range. It was discovered that using seismic isolation structure can adequately prevent the damage to the magnet system even when directly subjected to a massive earthquake., source:H. Tamura, T. Goto, J. Miyazawa, T. Tanaka and N. Yanagi, "Seismic Analysis of Magnet Systems in Helical Fusion Reactors Designed With Topology Optimization," in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-4, Sept. 2022, Art no. 4900504, doi: 10.1109/TASC.2022.3149731., source:http://doi.org/10.1109/TASC.2022.3149731, identifier:0000-0003-4210-9859

OBJECTIVES: The goal of this study was to identify the practical applications of intravenous cell therapy for single-ventricle physiology (SVP) by establishing experimental SVP models. METHODS: An SVP with a three-stage palliation was constructed in an acute swine model without cardiopulmonary bypass. A modified Blalock–Taussig (MBT) shunt was created using an aortopulmonary shunt with the superior and inferior venae cavae (SVC and IVC, respectively) connected to the left atrium (n = 10). A bidirectional cavopulmonary shunt (BCPS) was constructed using a graft between the IVC and the left atrium with an SVC cavopulmonary connection (n = 10). The SVC and the IVC were connected to the pulmonary artery to establish a total cavopulmonary connection (TCPC, n = 10). The survival times of half of the animal models were studied. The other half and the biventricular sham control (n = 5) were injected intravenously with cardiosphere-derived cells (CDCs), and the cardiac retention of CDCs was assessed after 2 h. RESULTS: All SVP models died within 20 h. Perioperative mortality was higher in the BCPS group because of lower oxygen saturation (P < 0.001). Cardiac retention of intravenously delivered CDCs, as detected by magnetic resonance imaging and histologic analysis, was significantly higher in the modified Blalock-Taussig and BCPS groups than in the TCPC group (P < 0.01). CONCLUSIONS: Without the total right heart exclusion, stage-specific SVP models can be functionally constructed in pigs with stable outcomes. Intravenous CDC injections may be applicable in patients with SVP before TCPC completion, given that the initial lung trafficking is efficiently bypassed and sufficient systemic blood flow is supplied from the single ventricle.

Supported by the world magnetic fusion research community, a series of International Symposia on Liquid metals Applications for fusion (ISLA) have been held biannually since 2010. The 7th edition (ISLA-7) was held for the period from 12 December through 16 December 2022, at Chubu University located in Kasugai, Aichi, Japan. For the first time in the history of this series of symposia, ISLA-7 was held in a hybrid fashion, due to the COVID-19 situation. The total number of the participants was 60, 34 out of whom attended the symposium in person, and the rest participated online. As to the presentation statistics, 29 papers were presented in person, whereas 21 presentations were delivered online but real-time by the presenters in China, Spain, the UK, and the USA. Both of the presentations delivered in person and online were recorded, and the video has been shared by all participants. These participants represent 11 countries: China, Czech, Italy, Japan, Latvia, Netherlands, Russia, Thailand, the UK, and the USA. All these numbers are among the largest in this series of symposia. Covered by these presentations are; in session-2, program overviews and liquid metal research review; in session-3, liquid metal flows, and MHD issues; in session-4, liquid metal facilities; in sessions-5 and 6, liquid metal experiments and modeling; in session-7, divertor physics and heat flux mitigation; in session-8, plasma and liquid metals interactions; in session-9 liquid metal plasma-facing components, erosion, and wettability. In addition, there were an opening session whereby several opening addresses were delivered and also a closing session where all technical session summaries were presented by the respective session chairs.