Search

Abstract Nonviral vectors, such as liposomes, offer potential for targeted gene delivery in cancer therapy. Liposomes, composed of phospholipid vesicles, have demonstrated efficacy as nanocarriers for genetic tools, addressing the limitations of off‐targeting and degradation commonly associated with traditional gene therapy approaches. Due to their biocompatibility, stability, and tunable physicochemical properties, they offer potential in overcoming the challenges associated with gene therapy, such as low transfection efficiency and poor stability in biological fluids. Despite these advancements, there remains a gap in understanding the optimal utilization of nanoliposomes for enhanced gene delivery in cancer treatment. This review delves into the present state of nanoliposomes as carriers for genetic tools in cancer therapy, sheds light on their potential to safeguard genetic payloads and facilitate cell internalization alongside the evolution of smart nanocarriers for targeted delivery. The challenges linked to their biocompatibility and the factors that restrict their effectiveness in gene delivery are also discussed along with exploring the potential of nanoliposomes in cancer gene therapy strategies by analyzing recent advancements and offering future directions.

The human body possesses a remarkable ability to heal itself from injuries [...]

The skin is the largest organ of the body, and it acts as a protective barrier against external factors. Chronic wounds affect millions of people worldwide and are associated with significant morbidity and reduced quality of life. One of the main factors involved in delayed wound healing is oxidative injury, which is triggered by the overproduction of reactive oxygen species. Oxidative stress has been implicated in the pathogenesis of chronic wounds, where it is known to impair wound healing by causing damage to cellular components, delaying the inflammatory phase of healing, and inhibiting the formation of new blood vessels. Thereby, the treatment of chronic wounds requires a multidisciplinary approach that addresses the underlying causes of the wound, provides optimal wound care, and promotes wound healing. Among the promising approaches to taking care of chronic wounds, antioxidants are gaining interest since they offer multiple benefits related to skin health. Therefore, in this review, we will highlight the latest advances in the use of natural polymers with antioxidants to generate tissue regeneration microenvironments for skin wound healing.

Extracellular matrix (ECM)-based bioinks has attracted much attention in recent years for 3D printing of native-like tissue constructs. Due to organ unavailability, human placental ECM can be an alternative source for the construction of 3D print composite scaffolds for the treatment of deep wounds. In this study, we use different concentrations (1.5%, 3% and 5%w/v) of ECM derived from the placenta, sodium-alginate and gelatin to prepare a printable bioink biomimicking natural skin. The printed hydrogels' morphology, physical structure, mechanical behavior, biocompatibility, and angiogenic property are investigated. The optimized ECM (5%w/v) 3D printed scaffold is applied on full-thickness wounds created in a mouse model. Due to their unique native-like structure, the ECM-based scaffolds provide a non-cytotoxic microenvironment for cell adhesion, infiltration, angiogenesis, and proliferation. In contrast, they do not show any sign of immune response to the host. Notably, the biodegradation, swelling rate, mechanical property, cell adhesion and angiogenesis properties increase with the increase of ECM concentrations in the construct. The ECM 3D printed scaffold implanted into deep wounds increases granulation tissue formation, angiogenesis, and re-epithelialization due to the presence of ECM components in the construct, when compared with printed scaffold with no ECM and no treatment wound. Overall, our findings demonstrate that the 5% ECM 3D scaffold supports the best deep wound regeneration in vivo, produces a skin replacement with a cellular structure comparable to native skin.

Additive manufacturing, widely known as 3D printing, has revolutionized the production of biomaterials. While conventional 3D-printed structures are perceived as static, 4D printing introduces the ability to fabricate materials capable of self-transforming their configuration or function over time in response to external stimuli such as temperature, light, or electric field. This transformative technology has garnered significant attention in the field of biomedical engineering due to its potential to address limitations associated with traditional therapies. Here, we delve into an in-depth review of 4D-printing systems, exploring their diverse biomedical applications and meticulously evaluating their advantages and disadvantages. We emphasize the novelty of this review paper by highlighting the latest advancements and emerging trends in 4D-printing technology, particularly in the context of biomedical applications.

Background: Colorectal cancer (CRC) is the third most prevalent type of cancer for incidence and second for mortality worldwide. Late diagnosis and inconvenient and expensive current diagnostic tools largely contribute to the progress of the disease. The use of chemotherapy in the management of CRC significantly reduces tumor growth, metastasis, and morbidity rates. However, poor solubility, low cellular uptake, nonspecific distribution, multiple drug resistance and unwanted adverse effects are still among the major drawbacks of chemotherapy that limit its clinical significance in the treatment of CRC. Owing to their remarkable advantages over conventional therapies, the use of nanotechnology-based delivery systems especially polymeric nanocarriers (PNCs) has revolutionized many fields including disease diagnosis and drug delivery. Aim of Review: In this review, we shed the light on the current status of using PNCs in the diagnosis and treatment of CRC with a special focus on targeting strategies, surface modifications and safety concerns for different types of PNCs in colonic cancer delivery. Key Scientific Concepts of Review: The review explores the current progress on the use of PNCs in the diagnosis and treatment of CRC with a special focus on the role of PNCs in improvement of cellular uptake, drug targeting and co-delivery of chemotherapeutic agents. Possible toxicity and biocompatibility issues related to the use of PNCs and imitations and future recommendation for the use of those smart carriers in the diagnosis and treatment of CRC are also discussed.

Three dimensional (3D) bioprinting is a powerful tool, that was recently applied to tissue engineering. This technique allows the precise deposition of cells encapsulated in supportive bioinks to fabricate complex scaffolds, which are used to repair targeted tissues. Here, we review the recent developments in the application of 3D bioprinting to dental tissue engineering. These tissues, including teeth, periodontal ligament, alveolar bones, and dental pulp, present cell types and mechanical properties with great heterogeneity, which is challenging to reproduce in vitro. After highlighting the different bioprinting methods used in regenerative dentistry, we reviewed the great variety of bioink formulations and their effects on cells, which have been established to support the development of these tissues. We discussed the different advances achieved in the fabrication of each dental tissue to provide an overview of the current state of the methods. We conclude with the remaining challenges and future needs.

In the present study, a novel composite bone cement based on calcium sulfate hemihydrate (CSH) and Mg, Sr-containing bioactive glass (BG) as solid phase, and solution of chitosan as liquid phase were developed. The phase composition, morphology, setting time, injectability, viscosity, and cellular responses of the composites with various contents of BG (0, 10, 20, and 30 wt.%) were investigated. The pure calcium sulfate cement was set at approximately 180 min, whereas the setting time was drastically decreased to 6 min by replacing 30 wt.% glass powder for CSH in the cement solid phase. BG changed the microscopic morphology of the set cement and decreased the size and compaction of the precipitated gypsum phase. Replacing the CSH phase with BG increased injection force of the produced cement; however, all the cements were injected at a nearly constant force, lower than 20 N. The viscosity measurements in oscillatory mode determined the shear-thinning behavior of the pastes. Although the viscosity of the pastes increased with increasing BG content, it was influenced by the frequency extent. Pure calcium sulfate cement exhibited some transient cytotoxicity on human-derived bone mesenchymal stem cells and it was compensated by introducing BG phase. Moreover, BG improved the cell proliferation and mineralization of extracellular matrix as shown by calcein measurements. The results indicate the injectable composite cement comprising 70 wt.% CSH and 30 wt.% Mg, Sr-doped BG has better setting, mechanical and cellular behaviors and hence, is a potential candidate for bone repair, however more animal and human clinical evaluations are essential.

Abstract Green chemistry has been a growing multidisciplinary field in recent years showing great promise in biomedical applications, especially for cancer therapy. Chitosan (CS) is an abundant biopolymer derived from chitin and is present in insects and fungi. This polysaccharide has favorable characteristics, including biocompatibility, biodegradability, and ease of modification by enzymes and chemicals. CS‐based nanoparticles (CS‐NPs) have shown potential in the treatment of cancer and other diseases, affording targeted delivery and overcoming drug resistance. The current review emphasizes on the application of CS‐NPs for the delivery of a chemotherapeutic agent, doxorubicin (DOX), in cancer therapy as they promote internalization of DOX in cancer cells and prevent the activity of P‐glycoprotein (P‐gp) to reverse drug resistance. These nanoarchitectures can provide co‐delivery of DOX with antitumor agents such as curcumin and cisplatin to induce synergistic cancer therapy. Furthermore, co‐loading of DOX with siRNA, shRNA, and miRNA can suppress tumor progression and provide chemosensitivity. Various nanostructures, including lipid‐, carbon‐, polymeric‐ and metal‐based nanoparticles, are modifiable with CS for DOX delivery, while functionalization of CS‐NPs with ligands such as hyaluronic acid promotes selectivity toward tumor cells and prevents DOX resistance. The CS‐NPs demonstrate high encapsulation efficiency and due to protonation of amine groups of CS, pH‐sensitive release of DOX can occur. Furthermore, redox‐ and light‐responsive CS‐NPs have been prepared for DOX delivery in cancer treatment. Leveraging these characteristics and in view of the biocompatibility of CS‐NPs, we expect to soon see significant progress towards clinical translation.

Millions of people die annually due to uncured wound infections. Healthcare systems incur high costs to treat wound infections. Tt is predicted to become more challenging due to the rise of multidrug-resistant conditions. During the last decades, smart antibacterial hydrogels could attract attention as a promising solution, especially for skin wound infections. These antibacterial hydrogels are termed ‘smart’ due to their response to specific physical and chemical environmental stimuli. To deliver different drugs to particular sites in a controlled manner, various types of crosslinking strategies are used in the manufacturing process. Smart hydrogels are designed to provide antimicrobial agents to the infected sites or are built from polymers with inherent disinfectant properties. This paper aims to critically review recent pre-clinical and clinical advances in using smart hydrogels against skin wound infections and propose the next best thing for future trends. For this purpose, an introduction to skin wound healing and disease is presented and intelligent hydrogels responding to different stimuli are introduced. Finally, the most promising investigations are discussed in their related sections. These studies can pave the way for producing new biomaterials with clinical applications.

Molecularly imprinted polymers (MIPs) are synthetic polymers with specific binding sites that present high affinity and spatial and chemical complementarities to a targeted analyte. They mimic the molecular recognition seen naturally in the antibody/antigen complementarity. Because of their specificity, MIPs can be included in sensors as a recognition element coupled to a transducer part that converts the interaction of MIP/analyte into a quantifiable signal. Such sensors have important applications in the biomedical field in diagnosis and drug discovery, and are a necessary complement of tissue engineering for analyzing the functionalities of the engineered tissues. Therefore, in this review, we provide an overview of MIP sensors that have been used for the detection of skeletal- and cardiac-muscle-related analytes. We organized this review by targeted analytes in alphabetical order. Thus, after an introduction to the fabrication of MIPs, we highlight different types of MIP sensors with an emphasis on recent works and show their great diversity, their fabrication, their linear range for a given analyte, their limit of detection (LOD), specificity, and reproducibility. We conclude the review with future developments and perspectives.

Calcium phosphate cements (CPCs) offer a promising solution for treating bone defects due to their osteoconductive, injectable, biocompatible, and bone replacement properties. However, their brittle nature restricts their utilization to non-load-bearing applications. In this study, the impact of hybrid silk fibroin (SF) and kappa-carrageenan (k-CG) nanofibers as reinforcements in CPC was investigated. The CPC composite was fabricated by incorporating electrospun nanofibers in 1, 3, and 5% volume fractions. The morphology, mineralization, mechanical properties, setting time, injectability, cell adhesion, and mineralization of the CPC composites were analyzed. The results demonstrated that the addition of the nanofibers improved the CPC mixture, leading to an increase in compressive strength (14.8 ± 0.3 MPa compared to 8.1 ± 0.4 MPa of the unreinforced CPC). Similar improvements were seen in the bending strength and work fracture (WOF). The MC3T3-E1 cell culture experiments indicated that cells attached well to the surfaces of all cement samples and tended to join their adjacent cells. Additionally, the CPC composites showed higher cell mineralization after a culture period of 14 days, indicating that the SF/k-CG combination has potential for applications as a CPC reinforcement and bone cell regeneration promoter.

Abstract Background Smoking in one of the most serious public health problems. It is well known that it constitutes a major risk factor for chronic diseases and the leading cause of preventable death worldwide. Due to high prevalence of smokers, new cost-effective strategies seeking to increase smoking cessation rates are needed. Methods We performed a Markov model-based cost-effectiveness analysis comparing two treatments: health advice provided by general practitioners and nurses in primary care, and health advice reinforced by sending motivational text messages to smokers’ mobile phones. A Markov model was used in which smokers transitioned between three mutually exclusive health states (smoker, former smoker and dead) after 6-month cycles. We calculated the cost-effectiveness ratio associated with the sending of motivational messages. Health care and society perspectives (separately) was adopted. Costs taken into account were direct health care costs and direct health care cost and costs for lost productivity, respectively. Additionally, deterministic sensitivity analysis was performed modifying the probability of smoking cessation with each option. Results Sending of text messages as a tool to support health advice was found to be cost-effective as it was associated with increases in costs of €7.4 and €1,327 per QALY gained (ICUR) for men and women respectively from a healthcare perspective, significantly far from the published cost-effectiveness threshold. From a societal perspective, the combined programmed was dominant. Conclusions Sending text messages is a cost-effective approach. These findings support the implantation of the combined program across primary care health centres.

The attention in lab-on-a-chip devices with their potent application in medical engineering has prolonged swiftly over the last ten years. Travelling through the technology development, innovative microfluidics devices shown enormous potential to lift the lab-on-a-chip biomedical research in traditions that are not imaginable using conventional techniques. The advances in the arena of microfluidics have prompted high-tech uprisings in numerous biomedical disciplines, including diagnostics, single-cell analysis, micro- and nano device fabrication, organ-in-chip platforms, and med-tech applications. The speedy development is motivated by the cumulative cooperation among central nanomaterials advances and innovative microfluidic aptitudes in the range of biomedical applications. Microfluidic gadgets presently undertake a significant part in numerous organic, synthetic, and designing applications, that have multiple approaches to create the vital channel and highlight measurements. In this review, the critical assessments on the frontiers of microfluidic platforms are carried out towards advancements in the microfluidic capabilities for the new-edge biomedical applications. It has been exhibited that microfluidics offers a scope of benefits contrasted with customary strategies, including further developed controllability and consistency specified by nanomaterial attributes. Herein, authors have discussed how innumerable nanomaterials empower the manufacture of microfluidic systems with advanced optical, mechanical, electrical chemical, and bio-interfacial properties ranging from the basics of microfluidics, various factors, types, and fabrication procedure to biomedical applications. A comprehensive investigation in the state-of-the-art usage of microfluidics in biomedical field is steered exemplarily to understand the significant advantages. Moreover, our assessment provides an interdisciplinary overview of modern microfabrication strategies that can be adopted for academic and industrial interests.

Coronavirus 2 (SARS-CoV2) (COVID-19) causes severe acute respiratory syndrome. Severe illness of COVID-19 largely occurs in older people and recent evidence indicates that demented patients have higher risk for COVID-19. Additionally, COVID-19 further enhances the vulnerability of older adults with cognitive damage. A balance between the immune and inflammatory response is necessary to control the infection. Thus, antimicrobial and anti-inflammatory drugs are hopeful therapeutic agents for the treatment of COVID-19. Accumulating evidence suggests that lactoferrin (Lf) is active against SARS-CoV-2, likely due to its potent antiviral and anti-inflammatory actions that ultimately improves immune system responses. Remarkably, salivary Lf levels are significantly reduced in different Alzheimer’s disease (AD) stages, which may reflect AD-related immunological disturbances, leading to reduced defense mechanisms against viral pathogens and an increase of the COVID-19 susceptibility. Overall, there is an urgent necessity to protect AD patients against COVID-19, decreasing the risk of viral infections. In this context, we propose bovine Lf (bLf) as a promising preventive therapeutic tool to minimize COVID-19 risk in patients with dementia or AD.

Many biomaterials have been developed which aim to match the elastic modulus of the brain for improved interfacing. However, other properties such as ultimate toughness, tensile strength, poroviscoelastic responses, energy dissipation, conductivity, and mass diffusivity also need to be considered.

The serious challenge posed by multidrug-resistant bacterial infections with concomitant treatment failure and high mortality rates presents an urgent threat to the global health. We herein report the discovery of a new class of potent antimicrobial compounds that are highly effective against Gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA). The compounds were efficiently synthesized in one-pot employing a cascade of Groebke–Blackburn–Bienaymé and aza-Michael addition reactions. Phenotypic screening of the pilot library against various bacterial species including methicillin-sensitive and MRSA strains, has identified potent chemotypes with minimal inhibitory concentrations (MIC) of 3.125–6.25 μg/ml. The most potent compounds were fast-acting at eradicating exponentially growing MRSA, with killing achieved after 30 min of exposure to the compounds. They were also able to kill MRSA persister cells which are tolerant to most available medications. Microscopic analysis using fluorescence microscope and atomic force microscope indicate that these compounds lead to disruption of bacterial cell envelopes. Most notably, bacterial resistance toward these compounds was not observed after 20 serial passages in stark contrast to the significant resistance developed rapidly upon exposure to a clinically relevant antibiotic. Furthermore, the compounds did not induce significant hemolysis to human red blood cells. In vivo safety studies revealed a high safety profile of these motifs. These small molecules hold a promise for further studies and development as new antibacterial agents against MRSA infections.

Biotechnology is an evolving research field that covers a broad range of topics. Here we aimed to evaluate the latest research literature, to identify prominent research themes, major contributors in terms of institutions, countries/regions, and journals. The Web of Science Core Collection online database was searched to retrieve biotechnology articles published since 2017. In total, 12,351 publications were identified and analyzed. Over 8500 institutions contributed to these biotechnology publications, with the top 5 most productive ones scattered over France, China, the United States of America, Spain, and Brazil. Over 140 countries/regions contributed to the biotechnology research literature, led by the United States of America, China, Germany, Brazil, and India. Journal of Bioscience and Bioengineering was the most productive journal in terms of number of publications. Metabolic engineering was among the most prevalent biotechnology study themes, and Escherichia coli and Saccharomyces cerevisiae were frequently used in biotechnology investigations, including the biosynthesis of useful biomolecules, such as myo-inositol (vitamin B8), monoterpenes, adipic acid, astaxanthin, and ethanol. Nanoparticles and nanotechnology were identified too as emerging biotechnology research themes of great significance. Biotechnology continues to evolve and will remain a major driver of societal innovation and development.

Abstract The search for new, robust, and reproducible biomarkers for Alzheimer's disease (AD) diagnosis is a challenge. We recently reported that salivary lactoferrin (Lf) could be presented as new biomarker candidate for AD, being both non‐invasive and cost‐effective, as well as having appropriate diagnostic performance for the clinical detection of AD subjects. Saliva is an attractive sample type for biomarker‐based testing approaches for several other diseases; however, its composition may change under certain circumstances. It is therefore critical to maintain a consistent salivary handling protocol, considering possible extrinsic factors that may influence salivary Lf concentration. In this work, we analyzed salivary Lf concentration under different handling conditions and donor‐dependent factors including age, inter‐diurnal variations, physical activity, and pharmacological treatments. Our aim was to evaluate the influence of such conditions on salivary Lf concentration. In conclusion, we found that most of these extrinsic factors should be considered in the future when using Lf as a predictive biomarker for AD.

Tissue engineering has become a medical alternative in this society with an ever-increasing lifespan. Advances in the areas of technology and biomaterials have facilitated the use of engineered constructs for medical issues. This review discusses on-going concerns and the latest developments in a widely employed biomaterial in the field of tissue engineering: gelatin. Emerging techniques including 3D bioprinting and gelatin functionalization have demonstrated better mimicking of native tissue by reinforcing gelatin-based systems, among others. This breakthrough facilitates, on the one hand, the manufacturing process when it comes to practicality and cost-effectiveness, which plays a key role in the transition towards clinical application. On the other hand, it can be concluded that gelatin could be considered as one of the promising biomaterials in future trends, in which the focus might be on the detection and diagnosis of diseases rather than treatment.

Cardiovascular disease is the number one killer worldwide, with myocardial infarction (MI) responsible for approximately 1 in 6 deaths. The lack of endogenous regenerative capacity, added to the deleterious remodelling programme set into motion by myocardial necrosis, turns MI into a progressively debilitating disease, which current pharmacological therapy cannot halt. The advent of Regenerative Therapies over 2 decades ago kick-started a whole new scientific field whose aim was to prevent or even reverse the pathological processes of MI. As a highly dynamic organ, the heart displays a tight association between 3D structure and function, with the non-cellular components, mainly the cardiac extracellular matrix (ECM), playing both fundamental active and passive roles. Tissue engineering aims to reproduce this tissue architecture and function in order to fabricate replicas able to mimic or even substitute damaged organs. Recent advances in cell reprogramming and refinement of methods for additive manufacturing have played a critical role in the development of clinically relevant engineered cardiovascular tissues. This review focuses on the generation of human cardiac tissues for therapy, paying special attention to human pluripotent stem cells and their derivatives. We provide a perspective on progress in regenerative medicine from the early stages of cell therapy to the present day, as well as an overview of cellular processes, materials and fabrication strategies currently under investigation. Finally, we summarise current clinical applications and reflect on the most urgent needs and gaps to be filled for efficient translation to the clinical arena.

Preoccupation about potential deleterious effects of pharmaceuticals in the environment is growing fast. Psychiatric pharmaceuticals have received particular attention because of their increasing use and their potential impacts on many living beings due to their effects on phylogenetically highly conserved neuroendocrine systems. Recent studies that have shown that many pharmaceuticals (including psychotropics) bioaccumulate through the web food have raised this concern into new heights. As professionals working in the field of psychiatry and academia, we believe we are about to enter a new era with regard to pharmacotherapy. We estimate drug pollution will have a major impact on our daily practice in a way we are just starting to imagine. So far, this problem has largely been ignored by healthcare professionals, who are the ones prescribing and dispensing pharmaceuticals. We are convinced that increasing awareness among these professionals will be a key element to effectively fight against drug pollution.

Skin tissue engineering and regeneration aim at repairing defective skin injuries and progress in wound healing. Until now, even though several developments are made in this field, it is still challenging to face the complexity of the tissue with current methods of fabrication. In this review, short, state-of-the-art on developments made in skin tissue engineering using 3D bioprinting as a new tool are described. The current bioprinting methods and a summary of bioink formulations, parameters, and properties are discussed. Finally, a representative number of examples and advances made in the field together with limitations and future needs are provided.

The combination of protein-coated graphene oxide (GO) and microencapsulation technology has moved a step forward in the challenge of improving long-term alginate encapsulated cell survival and sustainable therapeutic protein release, bringing closer its translation from bench to the clinic. Although this new approach in cell microencapsulation represents a great promise for long-term drug delivery, previous studies have been performed only with encapsulated murine C2C12 myoblasts genetically engineered to secrete murine erythropoietin (C2C12-EPO) within 160 µm diameter hybrid alginate protein-coated GO microcapsules implanted into syngeneic mice. Here, we show that encapsulated C2C12-EPO myoblasts survive longer and release more therapeutic protein by doubling the micron diameter of hybrid alginate-protein-coated GO microcapsules to 380 µm range. Encapsulated mesenchymal stem cells (MSC) genetically modified to secrete erythropoietin (D1-MSCs-EPO) within 380 µm-diameter hybrid alginate-protein-coated GO microcapsules confirmed this improvement in survival and sustained protein release in vitro. This improved behavior is reflected in the hematocrit increase of allogeneic mice implanted with both encapsulated cell types within 380 µm diameter hybrid alginate-protein-coated GO microcapsules, showing lower immune response with encapsulated MSCs. These results provide a new relevant step for the future clinical application of protein-coated GO on cell microencapsulation.

Epithelial to mesenchymal transition (EMT) has emerged as a key process in the development of renal fibrosis. In fact, EMT-derived fibroblasts contribute to the progression of chronic renal disease. In addition, anti-inflammatory M2 macrophages have exhibited a great influence on renal fibrosis. However, because of the high impact that the inputs of different environmental cytokines have on their phenotype, macrophages can easily lose this property. We aim to known if microencapsulated macrophages on M2-inducing alginate matrices could preserve macrophage phenotype and thus release factors able to act on epithelial cells to prevent the epithelial differentiation towards mesenchymal cells. We reproduced an in vitro model of EMT by treating adipose-derived stem cells with all-trans retinoic acid (ATRA) and induced their transformation toward epithelia. Dedifferentiation of epithelial cells into a mesenchymal phenotype occurred when ATRA was retired, thus simulating EMT. Results indicate that induction of M2 phenotype by IL-10 addition in the alginate matrix produces anti-inflammatory cytokines and increases the metabolic activity and the viability of the encapsulated macrophages. The released conditioned medium modulates EMT and maintains healthy epithelial phenotype. This could be used for in vivo cell transplantation, or alternatively as an external releaser able to prevent epithelial to mesenchymal transformation for future anti-fibrotic therapies.

Abstract Introduction The Alzheimer's disease (AD) process is likely initiated many years before clinical onset. Biomarkers of preclinical disease are critical for the development of disease‐modifying or even preventative therapies. Current biomarkers for early disease, including cerebrospinal fluid tau and amyloid β (Aβ) levels, structural and functional magnetic resonance imaging, and the use of brain amyloid imaging, are limited because they are very invasive or expensive. Noninvasive biomarkers may be a more accessible alternative, but none can currently detect preclinical AD with the required sensitivity and specificity. Methods Here, we show a novel, straight‐forward, and noninvasive approach for assessment of early stages of cognitive decline. Salivary samples from cases of amnestic mild cognitive impairment (aMCI) and AD, and neurology controls were analyzed. Results We have discovered and validated a new single saliva biomarker, lactoferrin, which in our cross‐sectional investigation perfectly discriminates clinically diagnosed aMCI and AD patients from a cognitively healthy control group. The accuracy for AD diagnosis shown by salivary lactoferrin was greater than that obtained from core cerebrospinal fluid (CSF) biomarkers, including total tau and CSF Aβ42. Furthermore, salivary lactoferrin can be used for population screening and for identifying those underdiagnosed subjects with very early stages of mild cognitive impairment and AD. Conclusion This biomarker may offer new insights in the early diagnostics for AD.

Abstract Given their durability and long‐term stability, self‐healable hydrogels have, in the past few years, emerged as promising replacements for the many brittle hydrogels currently being used in preclinical or clinical trials. To this end, the incompatibility between hydrogel toughness and rapid self‐healing remains unaddressed, and therefore most of the self‐healable hydrogels still face serious challenges within the dynamic and mechanically demanding environment of human organs/tissues. Furthermore, depending on the target tissue, the self‐healing hydrogels must comply with a wide range of properties including electrical, biological, and mechanical. Notably, the incorporation of nanomaterials into double‐network hydrogels is showing great promise as a feasible way to generate self‐healable hydrogels with the above‐mentioned attributes. Here, the recent progress in the development of multifunctional and self‐healable hydrogels for various tissue engineering applications is discussed in detail. Their potential applications within the rapidly expanding areas of bioelectronic hydrogels, cyborganics, and soft robotics are further highlighted.

The efficacy of current standard chemotherapy is suboptimal due to the poor solubility and short half-lives of chemotherapeutic agents, as well as their high toxicity and lack of specificity which may result in severe side effects, noncompliance and patient inconvenience. The application of nanotechnology has revolutionized the pharmaceutical industry and attracted increasing attention as a significant means for optimizing the delivery of chemotherapeutic agents and enhancing their efficiency and safety profiles. Nanostructured lipid carriers (NLCs) are lipid-based formulations that have been broadly studied as drug delivery systems. They have a solid matrix at room temperature and are considered superior to many other traditional lipid-based nanocarriers such as nanoemulsions, liposomes and solid lipid nanoparticles (SLNs) due to their enhanced physical stability, improved drug loading capacity, and biocompatibility. This review focuses on the latest advances in the use of NLCs as drug delivery systems and their preparation and characterization techniques with special emphasis on their applications as delivery systems for chemotherapeutic agents and different strategies for their use in tumor targeting.

PURPOSE:The main objective of this study is to compare the protein expression of human keratocytes treated with Plasma rich in growth factors (PRGF) or autologous serum (AS) and previously induced to myofibroblast by TGF-β1 treatment. METHODS:Blood from healthy donor was collected and processed to obtain AS and PRGF eye drops. Blood derivates were aliquoted and stored at -80°C until use. Keratocyte cells were pretreated for 60 minutes with 2.5 ng/ml TGF-β1. After that, cells were treated with PRGF, AS or with TGF-β1 (control). To characterize the proteins deregulated after PRGF and AS treatment, a proteomic approach that combines 1D-SDS-PAGE approach followed by LC-MS/MS was carried out. RESULTS:Results show a catalogue of key proteins in close contact with a myofibroblastic differentiated phenotype in AS treated-cells, whereas PRGF-treated cells show attenuation on this phenotype. The number of proteins downregulated after PRGF treatment or upregulated in AS-treated cells suggest a close relationship between AS-treated cells and cytoskeletal functions. On the other hand, proteins upregulated after PRGF-treatment or downregulated in AS-treated cells reveal a greater association with processes such as protein synthesis, proliferation and cellular motility. CONCLUSION:This proteomic analysis helps to understand the molecular events underlying AS and PRGF-driven tissue regeneration processes, providing new evidence that comes along with the modulation of TGF-β1 activity and the reversion of the myofibroblastic phenotype by PRGF.

Salvador Harguindey1, Gorka Orive2,6, Ramón Cacabelos3, Enrique Meléndez Hevia4, Ramón Díaz de Otazu5, et al1Institute of Clinical Biology and Metabolism, Vitoria, Spain; 2Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, University of The Basque Country, Vitoria, Spain; 3Department of Clinical Neuroscience, EuroEspes Biomedical Research Center, Bergondo, La Coruña, Spain; 4Institute for Cellular Metabolism, Tenerife, Spain; 5Department of Pathology, Hospital Txagorritxu, Vitoria, Spain; 6Biotechnology Institute (BTI), Vitoria, SpainAbstract: A novel and integral approach to the understanding of human neurodegenerative diseases (HNDDs) and cancer based upon the disruption of the intracellular dynamics of the hydrogen ion (H+) and its physiopathology, is advanced. From an etiopathological perspective, the activity and/or deficiency of different growth factors (GFs) in these pathologies are studied, and their relationships to intracellular acid-base homeostasis reviewed. Growth and trophic factor withdrawal in HNDDs indicate the need to further investigate the potential utilization of certain GFs in the treatment of Alzheimer disease and other neurodegenerative diseases. Platelet abnormalities and the therapeutic potential of platelet-derived growth factors in these pathologies, either through platelet transfusions or other clinical methods, are considered. Finally, the etiopathogenic mechanisms of apoptosis and antiapoptosis in HNDDs and cancer are viewed as opposite biochemical and biological disorders of cellular acid-base balance and their secondary effects on intracellular signaling pathways and aberrant cell metabolism are considered in the light of the both the seminal and most recent data available. The “trophic factor withdrawal syndrome” is described for the first time in English-speaking medical literature, as well as a Darwinian-like interpretation of cellular behavior related to specific and nonspecific aspects of cell biology.Keywords: neurodegenerative diseases and growth factors; Alzheimer’s Disease, human neurodegenerative diseases, cancer, intracellular acid-base homeostasis, apoptosis, antiapoptosis, etiopathogenesis and treatment

One of the main differences among platelet-rich plasma (PRP) products is the inclusion of leukocytes that may affect the biological efficacy of these autologous preparations. The purpose of this study was to evaluate whether the addition of leukocytes modified the morphological, biomechanical and biological properties of PRP under normal and inflammatory conditions. The release of pro-inflammatory cytokines from plasma rich in growth factors (PRGF) and leukocyte-platelet rich plasma (L-PRP) scaffolds was determined by enzyme-linked immunosorbent assay (ELISA) and was significantly increased under an inflammatory condition when leukocytes were included in the PRP. Fibroblasts and osteoblasts treated with L-PRP, under an inflammatory situation, underwent a greater activation of NFĸB pathway, proliferated significantly less and secreted a higher concentration of pro-inflammatory cytokines. These cellular events were assessed through Western blot and fluorimetric and ELISA methods, respectively. Therefore, the inclusion of leukocytes induced significantly higher pro-inflammatory conditions.

Neurodegeneration together with a reduction in neurogenesis are cardinal features of Alzheimer's disease (AD) induced by a combination of toxic amyloid-β peptide (Aβ) and a loss of trophic factor support. Amelioration of these was assessed with diverse neurotrophins in experimental therapeutic approaches. The aim of this study was to investigate whether intranasal delivery of plasma rich in growth factors (PRGF-Endoret), an autologous pool of morphogens and proteins, could enhance hippocampal neurogenesis and reduce neurodegeneration in an amyloid precursor protein/presenilin-1 (APP/PS1) mouse model. Neurotrophic and neuroprotective actions were firstly evident in primary neuronal cultures, where cell proliferation and survival were augmented by Endoret treatment. Translation of these effects in vivo was assessed in wild type and APP/PS1 mice, where neurogenesis was evaluated using 5-bromodeoxyuridine (BdrU), doublecortin (DCX), and NeuN immunostaining 5 weeks after Endoret administration. The number of BrdU, DCX, and NeuN positive cell was increased after chronic treatment. The number of degenerating neurons, detected with fluoro Jade-B staining was reduced in Endoret-treated APP/PS1 mice at 5 week after intranasal administration. In conclusion, Endoret was able to activate neuronal progenitor cells, enhancing hippocampal neurogenesis, and to reduce Aβ-induced neurodegeneration in a mouse model of AD.