178 results on '"González-Carrasco, J.L."'
Search Results
2. Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response
3. Effect of Mg content on the thermal stability and mechanical behaviour of PLLA/Mg composites processed by hot extrusion
4. Assessment of mechanical behavior of PLA composites reinforced with Mg micro-particles through depth-sensing indentations analysis
5. On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
6. Repetitive nano-impact tests as a new tool to measure fracture toughness in brittle materials
7. In vitro corrosion behaviour of surgical 316LVM stainless steel modified by Si+ ion implantation – An electrochemical impedance spectroscopy study
8. Nanomechanical characterization of alumina coatings grown on FeCrAl alloy by thermal oxidation
9. In vitro degradation of biodegradable polylactic acid/magnesium composites: Relevance of Mg particle shape
10. Thermal oxidation of medical Ti6Al4V blasted with ceramic particles: Effects on the microstructure, residual stresses and mechanical properties
11. Dynamic nanomechanical properties of novel Si-rich intermetallic coatings growth on a medical 316 LVM steel by hot dipping in a hypereutectic Al–25Si alloy
12. Improvement of the blasting induced effects on medical 316 LVM stainless steel by short-term thermal treatments
13. Strain rate effect on semi-crystalline PLLA mechanical properties measured by instrumented indentation tests
14. Fatigue behavior of Ti6Al4V and 316 LVM blasted with ceramic particles of interest for medical devices
15. A method to assess the fracture toughness of intermetallic coatings by ultramicroindentation techniques: Applicability to coated medical stainless steel
16. Characterization of the elastic–plastic behavior of intermetallic coatings growth on medical stainless steel by instrumented ultramicroindentation
17. Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques
18. On the role of RhoA/ROCK signaling in contact guidance of bone-forming cells on anisotropic Ti6Al4V surfaces
19. Nanomechanical properties of novel intermetallic coatings developed on austenitic stainless steels by siliconisation in liquid phase
20. Roughening of metallic biomaterials by abrasiveless waterjet peening: Characterization and viability
21. Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties
22. On the delamination of FeCrAl ODS alloys
23. Influence of slight microstructural gradients on the surface properties of Ti6Al4V irradiated by UV
24. Phase separation in PM 2000™ Fe-base ODS alloy: Experimental study at the atomic level
25. Effect of UV irradiation on the surface Gibbs energy of Ti6Al4V and thermally oxidized Ti6Al4V
26. Assessment of factors influencing surface recrystallisation during high temperature exposure of fine-grained PM 2000 alloy
27. Evaluation of magnetic behaviour and in vitro biocompatibility of ferritic PM2000 alloy
28. Characterization of Grit Blasted Metallic Biomaterials by Thermoelectric Power Measurements
29. Looking at the micro-topography of polished and blasted Ti-based biomaterials using atomic force microscopy and contact angle goniometry
30. Application of thermal oxidation to the development of PM 2000 as potential biomaterial for medical devices
31. Metals as bone repair materials
32. Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications
33. Oxidation behaviour of novel ODS FeAlCr intermetallic alloys
34. Evaluation of mechanical properties and biological response of an alumina-forming Ni-free ferritic alloy
35. On the differences of the 475 °C age hardening between as-hot rolled and recrystallised MA956 alloy
36. Oxidation behaviour of yttria dispersion strengthened Fe40Al alloy foils
37. Possibilities for improving the corrosion resistance of Fe–40Al intermetallic strip by prior oxide protection
38. Influence of the yttria content on the oxidation behaviour of the intermetallic Fe40Al Alloy
39. In vitro corrosion behaviour and osteoblast response of thermally oxidised Ti6Al4V alloy
40. The influence of processing on the 475 °C hardening of MA 956 alloy
41. Effects of polyethylene and α-alumina particles on IL-6 expression and secretion in primary cultures of human osteoblastic cells
42. The influence of grain size and dispersoids on the quench hardening of a mechanically alloyed Fe-40Al intermetallic
43. Oxidation behaviour of Fe40Al alloy strip
44. The influence of some microstructural and test parameters on the tensile behaviour and the ductility of a mechanically-alloyed Fe–40Al alloy
45. Influence of the 475°C hardening of MA 956 on its corrosion behaviour at room temperature
46. The high temperature oxidation behaviour of an ODS FeAl alloy
47. Effect of substrate roughness on the corrosion behaviour of the Al 2O 3/MA 956 system
48. Effect of the processing route on the oxidation behaviour of a Ni 3Al powder metallurgy alloy
49. Corrosion behaviour of an Fe 3Al-type intermetallic in a chloride containing solution
50. Oxidation behaviour of an ODS NiAl-based intermetallic alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.