Search

Calotropis procera fibres have been proposed for free-phase diesel removal in case of spillage into groundwater. For this, characterizations were carried out using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FEG-SEM), wettability and contact angle measurements. Sorption oil capacity, kinetic, isothermal and recycling behaviour were evaluated. For initial optimization of the oil sorption capacity, an experimental design (DOE) was applied, with the optimized condition being 60 g L -1 of diesel in water and 0.01 g of fibre. Then, the results clearly indicated that the fibres have a hydrophobic and oleophilic character, quickly reaching more than 71.43 g g -1 of diesel sorption, according to the adjustment ( R ² > 0.99) of the pseudo-second order and Langmuir models, governed by absorption mechanisms. It should also be noted that at the end of 8 reuse cycles, the fibre presented a total accumulated sorption capacity of about 252.6 g g -1 of diesel. Furthermore, a laboratory-scale experiment was carried out to remove diesel from groundwater in gas station areas, the fibre removed 98.55% to 99.97% of removal efficiencies were achieved of the free phase over time. Therefore, the material demonstrates excellent characteristics for removing diesel spills in groundwater due to its fast, high and stable removal capacity.

A direct and practical method for photocatalyzed hydrodecarboxylation of fatty acids is reported herein. The catalytic system consists of a commercially available acridinium salt as the photocatalyst and thiophenol as the Hydrogen Atom Transfer (HAT) co-catalyst. Results evidenced that C n -1 alkanes were obtained in yields up to 77%. Furthermore, the protocol was employed for a complex mixture of fatty acids bio-derived from a real sample of licuri oil to obtain hydrocarbons in the range of C 9 -C 17 with high selectivity and excellent conversion (>90%). This work provides a powerful strategy for producing drop-in biofuels under mild conditions. Finally, an energetic assessment of our proposed protocol (∼22.9 kW h) reveals the benefit of a sustainable production of renewable hydrocarbons., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Beauty salons (BS) are places that deal with a wide range of cosmetics with potentially hazardous chemicals, and their effluent should be properly treated before going to the sewage system, once it represents characteristics of industrial wastewater. This work provides an extensive characterization of a BS effluent and its respective electrochemical treatment by comparing NaCl, Na 2 SO 4 , and Na 2 S 2 O 8 as supporting electrolytes with a boron-doped diamond (BDD) as anode, applying 10 or 30 mA cm -2 of current density (j). The inclusion of UVC irradiation was also performed but the improvements achieved in removing the organic matter were null or lower. The analysis of chemical oxygen demand (COD) removal, energy consumption, and total current efficiency (TCE) was required to prove the efficacy of the processes and the comparative study of the performance of different technologies. Precipitate analysis was also done due to the high turbidity of the raw effluent and the appearance of a precipitate before and during the electrolysis, mainly with Na 2 S 2 O 8 . The precipitate confirmed the presence of silicates and small amounts of heavy metals. The results clearly showed that 6 h of treatment with Na 2 SO 4 achieved 58% of COD removal with an energy consumption of about 0.52 kWh m -3 , being the best electrolyte option for treating BS effluent by applying 10 mA cm -2 . Under these experimental conditions, the final wastewater can be directly discharged into the sewage system with a lower amount of visible precipitate, and with 73% less turbidity. The treatment here proposed can be used as an alternative to decision-makers and governments once it can be a step further in the implementation of better and advanced politics of water sanitation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

There is a growing concern with waste minimization and the promotion of the circular economy. Within this framework, using membrane-equipped electrochemical systems, the electrochemical oxidation (EO) of organic compounds and simultaneous hydrogen (H 2 ) production can considerably improve the sustainability and economic viability of this process. Here, we propose an innovative-integrate electrochemical treatment strategy to maximize the economic benefits and sustainability of selectively producing organic acids and energy-saving H 2 production from biomass platform compounds. The results clearly demonstrated that, on the one hand, more than 80 mg L -1 of oxalic acid was obtained in the anodic reservoir (using a boron-doped diamond electrode) with an alkaline medium (0.5 mol L -1 NaOH) by applying 100 mA cm -2 as well as vanillic acid production of 0.6795 mg L -1 under the same conditions. On the other hand, simultaneously green H 2 production greater than 2.6 L was produced, in the cathodic compartment with a Ni-Fe-based mesh as cathode, with a 90% faradaic efficiency during the process. Thus, the electrochemical conversion of lignocellulosic biomass effluent into high-value-added products and an energy vector was sustainably accomplished, suggesting that it is a promising energy-saving and cost-effective integrated approach for biomass valorization using solar energy., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

A mild, practical, and environmentally friendly method for the hydrodecarboxylation of fatty acids using an acridine-based photoredox catalyst and thiophenol was developed. C n-1 alkanes were synthesized in good to excellent yields (up to 99 %) from C10-C18 saturated fatty acids under visible light irradiation (405 nm). The developed protocol was employed for a mixture of fatty acids obtained from the hydrolysis of Licuri oil, affording a mixture of C9-C17 hydrocarbons in quantitative yield, which demonstrates the potential application of the method to produce drop-in biofuels., (© 2023 Wiley-VCH GmbH.)

Aiming the decentralization of monitoring policies and to facilitate the work of researchers, mainly in developing countries, the present method deals with the explanation of a simple and rapid protocol for chemical oxygen demand (COD) analysis through the use of digital smartphone devices coupled with a camera and a free app available for Android operating system that recognizes HSV (hue, saturation, value). The calibration of the method is done based on the theoretical values of potassium hydrogen phthalate for a proper and reliable build of the calibration curve by using the smartphone-based technique and the digested samples of COD. The coefficient of determination (R 2 ) attained a value upper than 0.99, providing a high confidence levels, and the method achieved 97% of average accuracy in samples with COD values ranging from 0 to 150 mg L -1 . Finally, the procedure here presented can be a great support for scientific laboratories and monitoring policies, once it can efficiently substitute expensive spectrophotometers and can improve and ensure the sustainable management of water sanitation, which is one of the sustainable goals proposed by the United Nations.•COD measurements, based on the use of a simple smartphone with a camera, can be a promising way for environmental analysis when spectrophotometers are not available, such as decentralized approaches.•The use of smartphone protocol is a novel initiative to fulfill sustainable development goal 6 on clean water and sanitation.•The smartphone is capable to read the difference of HSV values efficiently and can substitute the use of expensive spectrophotometers., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Published by Elsevier B.V.)

The nanostructured lanthanide-silica materials of the Ln-SiO 2 type (Ln = La, Ce, Pr, Nd, Eu, Gd, Dy, Yb, Lu) were synthesized by the hydrothermal method at 100 °C, using cetyltrimethylammonium as a structural template, silica gel and sodium silicate as a source of silicon, and lanthanide oxides, with Si/Ln molar ratio = 50. The resulting materials were calcined at 500 °C using nitrogen and air, and characterized by X-ray diffraction (XRD), Fourier-Transform infrared absorption spectroscopy, scanning electron microscopy, thermogravimetry (TG), surface area by the BET method and acidity measurements by n-butylamine adsorption. The XRD and chemical analysis indicated that the SiO 2 presented a hexagonal structure and the incorporation of lanthanides in the structure changes the properties of the Ln-SiO 2 materials. The heavier the lanthanide element, the higher the Si/Ln ratio. The TG curves showed that the decomposition of the structural template occurs in the materials at temperatures below 500 °C. The samples showed variations in specific surface area, mean pore diameter and silica wall thickness, depending on the nature of the lanthanide. The incorporation of different lanthanides in the silica generated acid sites of varied strength. The hydrothermal stability of the Ln-SiO 2 materials evaluated at high temperatures, evidenced that the properties can be controlled for application in adsorption and catalysis processes.

An operationally simple and highly selective method for the decarboxylation of fatty acids under remarkably mild conditions is described herein. The activation of the aliphatic carboxylic acids by esterification with N -hydroxyphthalimide (NHPI) enabled efficient deoxygenation to synthesize n -alkanes in up to 67% yield, employing inexpensive PMHS as a hydrogen source, NiCl 2 ·6H 2 O, bipyridine, and zinc in THF. In contrast to the conventional thermo-catalytic approaches, this protocol does not require high temperature and high pressure of hydrogen gas to deoxygenate biomass-derived carboxylic acids, thus representing an attractive alternative for producing drop-in biofuels., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Catalytic pyrolysis of vegetable oil is one of the potential routes to convert oil to drop-in biofuels, known as renewable hydrocarbons. In this paper, we explored catalytic pyrolysis of coconut oil using SBA-15 impregnated with Ni in proportions of 1% to 5% to produce sustainable aviation fuel. The catalysts were synthesized, calcined and then characterized by XRD, FTIR, SEM, and EDS. In order to better understand the behavior of this process, thermal and kinetic studies were carried out by thermogravimetry. The TG curves of vegetable oil with (10%) and without catalysts were obtained at heating rates of 5, 15 and 20 °C min -1 , in the temperature range between 30 and 600 °C. The kinetic parameters were calculated by the Ozawa-Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS) methods. In the kinetic study, lower heat rates promoted higher conversions and the KAS model suits the process. The results calculated for the OC sample using the two kinetic models showed an increase in the E a energy as the conversion progressed to a certain point. Catalytic pyrolysis experiments were performed in a one-stage tubular reactor at 500 °C with a catalyst loading of 10 wt% on the basis of mass of oil. The catalyst with 5% Ni showed greater presence of hydrocarbons and greater formation of water, indicating that the deoxygenation process occurred through decarbonylation. With this, the present study was successful in the development of methodologies for obtaining hydrocarbons with a composition close to that of drop-in fuels, compared to the process carried out with vegetable oil in the absence of catalysts., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (This journal is © The Royal Society of Chemistry.)

The objective of this study was to evaluate the Calotropis procera fiber treated with NaOH combined with heat treatment as sorbent material for removal of petroleum and derivatives in cases of oil spill. The effects of oil viscosity, fiber/oil contact time, and the type of sorption system (oil and oil/water) were evaluated by experimental planning. The fiber obtained was characterized by Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (SEM-FEG), thermogravimetric analysis (TG/DTG), contact angle, and wettability. The fiber treated by combining NaOH and heat treatment (CPNaOHT) exhibited a large structure with an internal diameter of 42.99 ± 3.98 μm, roughness, and hydrophobicity on the surface with a contact angle of 101 ± 2°. The sorption capacity of oil ranged from 190.32 g/g to 98.9 g/g. After five cycles of recycling, the fiber still maintains about 70% of its initial sorption capacity and presented low liquid desorption (0.25 g). In this way, it can be used as an efficient sorbent to clean up spills of oil and oil products.

The present work aims to evaluate the potential of Al-MCM-41 and Ni/Al-MCM-41 catalysts for the production of renewable hydrocarbons through the fast pyrolysis of palm oil. Al-MCM-41 mesoporous material was synthesized by the hydrothermal route. The Ni/Al-MCM-41 catalyst was obtained by the wet impregnation method of the Al-MCM-41 material (support) previously synthesized with 2.3% metal in relation to the support mass. The thermal pyrolysis of palm oil yielded many oxygenated compounds with a very high molecular mass. The pyrolysis of the oil under the action of Al-MCM-41 presented greater selectivity when compared to thermal pyrolysis, obtaining 63% of hydrocarbons in the C11-C15 region. The catalytic pyrolysis of the oil with Ni/Al-MCM-41 showed a high deoxygenation rate, obtaining a hydrocarbon percentage equal to 78%, in addition to obtaining a percentage of hydrocarbons equal to 46% in the region of interest, viz. , C11-C15, demonstrating the potential of the Ni/Al-MCM-41 catalyst for renewable hydrocarbons production (bio-jet fuel) from palm oil., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Aviation industry has the challenge of halving CO 2 emissions by 2050, as compared to 2005. An alternative are drop-in biofuels, which are sustainable and fully compatible with aircraft engines and also can be mixed with fossil jet fuel. Among the feedstock for biojet fuel production, licuri ( Syagrus coronata ) can be highlighted as most of its fatty acids are in the jet fuel range. Thereby, this work investigated the composition and physicochemical characterization of licuri oil and licuri biodiesel, both with satisfactory results according to international standards, with the purpose of obtaining hydrocarbons in the range of jet fuel from these feedstock, by catalytic deoxygenation. The semi-batch reaction, using a 5% Pd/C catalyst at 300 °C and 207 psi, produced n -alkanes with a conversion of up to 39.2%. The n -alkane selectivity was 80.7%, in addition to CO 2 selectivity of 83.4% for biodiesel, indicating the preference for the decarboxylation pathway and also confirming licuri as a potential raw material for biojet fuel., Competing Interests: The authors declare no competing financial interest., (Copyright © 2019 American Chemical Society.)

Amphotericin B (AmB), a potent antifungal drug, presents physicochemical characteristics that impair the development of suitable dosage forms. In order to overcome the AmB insolubility, several lipid carriers such as microemulsions have been developed. In this context, the bullfrog oil stands out as an eligible oily phase component, since its cholesterol composition may favor the AmB incorporation. Thus, the aim of this study was to develop a microemulsion based on bullfrog oil containing AmB. Moreover, its thermal stability, antifungal activity, and cytotoxicity in vitro were evaluated. The microemulsion formulation was produced using the pseudo-ternary phase diagram (PTPD) approach and the AmB was incorporated based on the pH variation technique. The antifungal activity was evaluated by determination of minimal inhibitory concentration (MIC) against different species of Candida spp. and Trichosporon asahii. The bullfrog oil microemulsion, stabilized with 16.8% of a surfactant blend, presented an average droplet size of 26.50 ± 0.14 nm and a polydispersity index of 0.167 ± 0.006. This system was able to entrap AmB up to 2 mg mL -1 . The use of bullfrog oil as oily phase allowed an improvement of the thermal stability of the system. The MIC assay results revealed a growth inhibition for different strains of Candida spp. and were able to enhance the activity of AmB against T. asahii. The microemulsion was also able to reduce the AmB toxicity. Finally, the developed microemulsion showed to be a suitable system to incorporate AmB, improving the system's thermal stability, increasing the antifungal activity, and reducing the toxicity of this drug.

Bullfrog oil (BO), a natural product obtained from recycling of adipose tissue from the amphibian Rana catesbeiana Shaw, has been recently evaluated as a therapeutic activity ingredient. This work aimed to evaluate the long-term and accelerated thermal oxidative stabilities of this product, which is a promising raw material for emulsion technology development. BO was extracted from amphibian adipose tissue at 70 °C with a yield of 60% ± 0.9%. Its main fatty acid compounds were oleic (30.0%) and eicosapentaenoic (17.6%) acids. Using titration techniques, BO showed peroxide, acid, iodine and saponification indices of 1.92 mEq·O₂/kg, 2.95 mg·KOH/g oil, 104.2 g I₂/100 g oil and 171.2 mg·KOH/g oil, respectively. In order to improve the accelerated oxidative stability of BO, synthetic antioxidants butylhydroxytoluene (BHT) and buthylhydroxyanisole (BHA) were used. The addition of BHT increased the oxidation induction time compared to the pure oil, or the oil containing BHA. From the results, the best oil-antioxidant mixture and concentration to increase the oxidative stability and allow the oil to be a stable raw material for formulation purposes was derived.