Search

We will describe the characteristics of the afterpulsing effect seen in the optical intensifiers. It can be caused by either secondary electrons produced by primary photoelectrons hitting the micro-channel plate surface or by electron emission from the photocathode induced by the ion feedback. The result of this effect are additional pulses delayed with respect to the primary parent pulses. Using a fast data-driven camera, Tpx3Cam, we were able to clearly show afterpulsing present in the data at short time differences and small distances from the primary pulse, as well as to show the evolution of the afterpulsing effect with increasing time difference. We also studied the afterpulsing spatial distribution and observed an azimuthal asymmetry, which we attribute to the afterpulsing ion component.

We describe a fast data-driven optical camera, Tpx3Cam, with nanosecond scale timing resolution and 80 Mpixel/sec throughput. After the addition of intensifier, the camera is single photon sensitive with quantum efficiency determined primarily by the intensifier photocathode. The single photon performance of the camera was characterized with results on the gain, timing resolution and afterpulsing reported here. The intensified camera was successfully used for measurements in a variety of applications including quantum applications. As an example of such application, which requires simultaneous detection of multiple photons, we describe registration of photon pairs from the spontaneous parametric down-conversion source in a spectrometer. We measured the photon wavelength and timing with respective precisions of 0.15~nm and 3~ns, and also demonstrated that the two photons are anti-correlated in energy., Comment: prepared for submission to JINST for IWORID2022 proceedings

Based on conventional S-20 processes, a new series of high quantum efficiency (QE) photocathodes has been developed that can be specifically tuned for use in the ultraviolet, blue or green regions of the spectrum. The QE values exceed 30% at maximum response, and the dark count rate is found to be as low as 30 Hz/cm$^2$ at room temperature. This combination of properties along with a fast temporal response makes these photocathodes ideal for application in photon counting detectors, which is illustrated with an MCP photomultiplier tube for single and multi-photoelectron detection., Comment: Submitted to the proceedings of the DIRC2015 workshop