Search

We describe the spectrophotometric calibration of the Mid-Infrared Instrument's (MIRI) Medium Resolution Spectrometer (MRS) aboard the James Webb Space Telescope (JWST). This calibration is complicated by a time-dependent evolution in the effective throughput of the MRS; this evolution is strongest at long wavelengths, approximately a factor of 2 at 25um over the first two years of the mission. We model and correct for this evolution through regular observations of internal calibration lamps. Pixel flatfields are constructed from observations of the infrared-bright planetary nebula NGC 7027, and photometric aperture corrections from a combination of theoretical models and observations of bright standard stars. We tie the 5--18um flux calibration to high signal/noise (S/N; ~ 600-1000) observations of the O9 V star 10 Lacertae, scaled to the average calibration factor of nine other spectrophotometric standards. We calibrate the 18--28um spectral range using a combination of observations of main belt asteroid 515 Athalia and the circumstellar disk around young stellar object SAO 206462. The photometric repeatability is stable to better than 1% in the wavelength range 5--18um, and the S/N ratio of the delivered spectra is consistent between bootstrapped measurements, pipeline estimates, and theoretical predictions. The MRS point-source calibration agrees with that of the MIRI imager to within 1% from 7 to 21um and is approximately 1% fainter than prior Spitzer observations, while the extended source calibration agrees well with prior Cassini/CIRS and Voyager/IRIS observations., Comment: 29 pages, 32 figures. Submitted to AJ

Mid-infrared imaging of exoplanets and disks is now possible with the coronagraphs of the MIRI on the JWST. This wavelength range unveils new features of young directly imaged systems and allows us to obtain new constraints for characterizing the atmosphere of young giant exoplanets and associated disks. These observations aim to characterize the atmosphere of the planet HD 95086 b by adding mid-infrared information so that the various hypotheses about its atmospheric parameters values can be unraveled. Improved images of circumstellar disks are provided. We present the MIRI coronagraphic imaging of the system HD 95086 obtained with the F1065C, F1140, and F2300C filters at central wavelengths of 10.575, 11.3, and 23 microns, respectively. We explored the method for subtracting the stellar diffraction pattern in the particular case when bright dust emitting at short separation is present. Furthermore, we compared different methods for extracting the photometry of the planet. Using the atmospheric models Exo-REM and ATMO, we measured the atmospheric parameters of HD 95086 b. The planet HD 95086 b and the contribution from the inner disk are detected at the two shortest MIRI wavelengths F1065C and F1140C. The outer colder belt is imaged at 23 microns. The mid-infrared photometry provides better constraints on the atmospheric parameters. We evaluate a temperature of 850-1020 K, consistent with one previous hypothesis that only used NIR data. The radius measurement of 1.0-1.13 RJup is better aligned with evolutionary models, but still smaller than predicted. These observations allow us to refute the hypothesis of a warm circumplanetary disk. HD 95086 is one of the first exoplanetary systems to be revealed at mid-infrared wavelengths. This highlights the interests and challenges of observations at these wavelengths., Comment: Accepted for publication in A&A

The Mid-Infrared Instrument (MIRI)'s Medium Resolution Spectrometer (the MRS) on JWST has potentially important advantages for transit and eclipse spectroscopy of exoplanets, including lack of saturation for bright host stars, wavelength span to longward of 20 microns, and JWST's highest spectral resolving power. We here test the performance of the MRS for time series spectroscopy by observing the secondary eclipse of the bright stellar eclipsing binary R Canis Majoris. Our observations push the MRS into saturation at the shortest wavelength, more than for any currently known exoplanet system. We find strong charge migration between pixels that we mitigate using a custom data analysis pipeline. Our data analysis recovers much of the spatial charge migration by combining detector pixels at the group level, via weighting by the point spread function. We achieve nearly photon-limited performance in time series data at wavelengths longward of 5.2 microns. In 2017, Snellen et al. suggested that the MRS could be used to detect carbon dioxide absorption from the atmosphere of the temperate planet orbiting Proxima Centauri. We infer that the relative spectral response of the MRS versus wavelength is sufficiently stable to make that detection feasible. As regards the secondary eclipse of this Algol-type binary, we measure the eclipse depth by summing our spectra over the wavelengths in four channels, and also measuring the eclipse depth as observed by TESS. Those eclipse depths require a temperature for the secondary star that is significantly hotter than previous observations in the optical to near-IR, probably due to irradiation by the primary star. At full spectral resolution of the MRS, we find atomic hydrogen recombination emission lines in the secondary star, from principal quantum levels n = 7, 8, 10, and 14., Comment: Accepted for PASP. 23 pages, 14 figures, 4 tables

The JWST has been collecting scientific data for over two years now. Scientists are now looking deeper into the data, which introduces the need to correct known systematic effects. Important limiting factors for the MIRI/MRS are the pointing accuracy, non-linearity, detector charge migration, detector scattering, the accuracy of the PSF model, and the complex interplay between these. The Cycle 2 programme 3779 proposed a 72-point intra-pixel dither raster of the calibration star 10-Lac. In this first work of the paper series, we aim to address the degeneracy between the non-linearity and BFE that affect the pixel voltage integration ramps of the MRS. Due to the low flux in the longer wavelengths, we only do this in the 4.9 to 11.7 micron region. We fitted the ramps per pixel and dither, in order to fold in the deviations from classical non-linearity that are caused by charge migration. The ramp shapes should be repeatable depending on the part of the PSF that is sampled. By doing so, we defined both a grid-based linearity correction, and an interpolated linearity correction. We find significant improvements compared to the uniform illumination assumption. The standard deviation on the pixel ramp residual non-linearity is between 70-90% smaller than the current standard pipeline when self-calibrating with the grid. We are able to interpolate these coefficients to apply to any unresolved source not on the grid points, resulting in an up to 70% smaller standard deviation on the residual deviation from linearity. The FWHM is up to 20% narrower. The depth of the fringes is now consistent up the ramp. Pointing-specific linearity corrections allow us to fix the systematic deviation in the slopes. We demonstrated this for unresolved sources. The discovered trends with PSF sampling suggest that, we may be able to model ramps for spatially extended and resolved illumination as well., Comment: 18 pages, 20 figures, Accepted for publication in A&A

The Mid-Infrared Instrument (MIRI) aboard the James Webb Space Telescope (JWST) provides the observatory with a huge advance in mid-infrared imaging and spectroscopy covering the wavelength range of 5 to 28 microns. This paper describes the performance and characteristics of the MIRI imager as understood during observatory commissioning activities, and through its first year of science operations. We discuss the measurements and results of the imager's point spread function, flux calibration, background, distortion and flat fields as well as results pertaining to best observing practices for MIRI imaging, and discuss known imaging artefacts that may be seen during or after data processing. Overall, we show that the MIRI imager has met or exceeded all its pre-flight requirements, and we expect it to make a significant contribution to mid-infrared science for the astronomy community for years to come.

The nearby Supernova 1987A was accompanied by a burst of neutrino emission, which indicates that a compact object (a neutron star or black hole) was formed in the explosion. There has been no direct observation of this compact object. In this work, we observe the supernova remnant with JWST spectroscopy finding narrow infrared emission lines of argon and sulphur. The line emission is spatially unresolved and blueshifted in velocity relative to the supernova rest frame. We interpret the lines as gas illuminated by a source of ionizing photons located close to the center of the expanding ejecta. Photoionization models show that the line ratios are consistent with ionization by a cooling neutron star or pulsar wind nebula. The velocity shift could be evidence for a neutron star natal kick., Comment: Authors version of manuscript published in Science on 22 Feb 2024

There exist very few mid-infrared (IR) observations of supernovae (SNe) in general. Therefore, SN 1987A, the closest visible SN in 400 years, gives us the opportunity to explore the mid-IR properties of SNe, the dust in their ejecta and surrounding medium, and to witness the birth of a SN remnant (SNR). The James Webb Space Telescope (JWST), with its high spatial resolution and extreme sensitivity, gives a new view on these issues. We report on the first imaging observations obtained with the Mid-InfraRed Instrument (MIRI). We build temperature maps and discuss the morphology of the nascent SNR. Our results show that the temperatures in the equatorial ring (ER) are quite non-uniform. This could be due to dust destruction in some parts of the ring, as had been assumed in some previous works. We show that the IR emission extends beyond the ER, illustrating the fact that the shock wave has now passed through this ring to affect the circumstellar medium on a larger scale. Finally, while sub-mm Atacama Large Millimeter Array (ALMA) observations have hinted at the location of the compact remnant of SN 1987A, we note that our MIRI data have found no such evidence., Comment: 19 pages, 19 figures, 2 tables; Accepted for publication in the Astrophysical Journal (February 2, 2024)

WASP-107b is a warm ($\sim$740 K) transiting planet with a Neptune-like mass of $\sim$30.5 $M_{\oplus}$ and Jupiter-like radius of $\sim$0.94 $R_{\rm J}$, whose extended atmosphere is eroding. Previous observations showed evidence for water vapour and a thick high-altitude condensate layer in WASP-107b's atmosphere. Recently, photochemically produced sulphur dioxide (SO$_2$) was detected in the atmosphere of a hot ($\sim$1,200 K) Saturn-mass planet from transmission spectroscopy near 4.05 $\mu$m, but for temperatures below $\sim$1,000 K sulphur is predicted to preferably form sulphur allotropes instead of SO$_2$. Here we report the 9$\sigma$-detection of two fundamental vibration bands of SO$_2$, at 7.35 $\mu$m and 8.69 $\mu$m, in the transmission spectrum of WASP-107b using the Mid-Infrared Instrument (MIRI) of the JWST. This discovery establishes WASP-107b as the second irradiated exoplanet with confirmed photochemistry, extending the temperature range of exoplanets exhibiting detected photochemistry from $\sim$1,200 K down to $\sim$740 K. Additionally, our spectral analysis reveals the presence of silicate clouds, which are strongly favoured ($\sim$7$\sigma$) over simpler cloud setups. Furthermore, water is detected ($\sim$12$\sigma$), but methane is not. These findings provide evidence of disequilibrium chemistry and indicate a dynamically active atmosphere with a super-solar metallicity.

Brown dwarfs serve as ideal laboratories for studying the atmospheres of giant exoplanets on wide orbits as the governing physical and chemical processes in them are nearly identical. Understanding the formation of gas giant planets is challenging, often involving the endeavour to link atmospheric abundance ratios, such as the carbon-to-oxygen (C/O) ratio, to formation scenarios. However, the complexity of planet formation requires additional tracers, as the unambiguous interpretation of the measured C/O ratio is fraught with complexity. Isotope ratios, such as deuterium-to-hydrogen and 14N/15N, offer a promising avenue to gain further insight into this formation process, mirroring their utility within the solar system. For exoplanets only a handful of constraints on 12C/13C exist, pointing to the accretion of 13C-rich ice from beyond the disks' CO iceline. Here we report on the mid-infrared detection of the 14NH3 and 15NH3 isotopologues in the atmosphere of a cool brown dwarf with an effective temperature of 380 K in a spectrum taken with the Mid-InfraRed Instrument of the James Webb Space Telescope. As expected, our results reveal a 14N/15N value consistent with star-like formation by gravitational collapse, demonstrating that this ratio can be accurately constrained. Since young stars and their planets should be more strongly enriched in the 15N isotope, we expect that 15NH3 will be detectable in a number of cold, wide-separation exoplanets., Comment: Accepted by Nature. 28 pages, 7 figures, uses nature3.cls

The multi planet system HR8799 is the first target observed with MIRI's coronagraphs as part of the MIRI-EC Guaranteed Time Observations exoplanets programme in Nov. 2022. We obtained deep observations in three coronagraphic filters from 10 to 15mic (F1065C, F1140C, F1550C), and one standard imaging filter at 20 mic (F2100W), with the goal to extract the photometry of the four planets, as well as to detect and investigate the distribution of circumstellar dust. Using dedicated observations of a reference star, we tested several algorithms to subtract the stellar diffraction pattern while preserving the fluxes of planets, which can be significantly affected by over-subtraction. Measuring correctly the planet's flux values requires accounting for the attenuation by the coronagraphs as a function of their position, and to estimate the normalisation with respect to the central star. We tested several procedures to derive averaged photometric values and error bars. These observations have enabled us to obtain two main results. First of all, the four planets in the system are well recovered, and their mid-IR fluxes, combined with near-IR flux values from the literature, are compared to two exoplanet atmosphere models, ATMO and Exo-REM. As a main outcome, the MIRI photometric data points imply larger radii (0.86 or 1.07 RJ for planet b) and cooler temperatures (950 or 1100 K for planet b), especially for planet b, in better agreement with evolutionary models. Second of all, these JWST/MIRI coronagraphic data also deliver the first spatially resolved detection of the inner warm debris disk, the radius of which is constrained to about 15 au, with flux densities comparable, but lower than former unresolved spectroscopic measurements with Spitzer. abridged..., Comment: submitted on Sep; 8th, 2023

Supernova (SN) 1987A is the nearest supernova in $\sim$400 years. Using the {\em JWST} MIRI Medium Resolution Spectrograph, we spatially resolved the ejecta, equatorial ring (ER) and outer rings in the mid-infrared 12,927 days after the explosion. The spectra are rich in line and dust continuum emission, both in the ejecta and the ring. Broad emission lines (280-380~km~s$^{-1}$ FWHM) seen from all singly-ionized species originate from the expanding ER, with properties consistent with dense post-shock cooling gas. Narrower emission lines (100-170~km~s$^{-1}$ FWHM) are seen from species originating from a more extended lower-density component whose high ionization may have been produced by shocks progressing through the ER, or by the UV radiation pulse associated with the original supernova event. The asymmetric east-west dust emission in the ER has continued to fade, with constant temperature, signifying a reduction in dust mass. Small grains in the ER are preferentially destroyed, with larger grains from the progenitor surviving the transition from SN into SNR. The ER is fit with a single set of optical constants, eliminating the need for a secondary featureless hot dust component. We find several broad ejecta emission lines from [Ne~{\sc ii}], [Ar~{\sc ii}], [Fe~{\sc ii}], and [Ni~{\sc ii}]. With the exception of [Fe~{\sc ii}]~25.99$\mu$m, these all originate from the ejecta close to the ring and are likely being excited by X-rays from the interaction. The [Fe~{\sc ii}]~5.34$\mu$m to 25.99$\mu$m line ratio indicates a temperature of only a few hundred K in the inner core, consistent with being powered by ${}^{44}$Ti decay., Comment: 27 pages, 16 figures, 4 tables. Accepted ApJ

The Medium-Resolution integral field Spectrometer (MRS) of MIRI on board JWST performs spectroscopy between 5 and 28~$\mu$m. The optics of the MRS introduce substantial distortion, and this needs to be rectified in order to reconstruct the observed astrophysical scene. We use data from the JWST/MIRI commissioning and cycle 1 calibration phase, to derive the MRS geometric distortion and astrometric solution, a critical step in the calibration of MRS data. These solutions come in the form of transform matrices that map the detector pixels to spatial coordinates of a local MRS coordinate system called $\alpha$/$\beta$, to the global JWST observatory coordinates V2/V3. For every MRS spectral band and each slice dispersed on the detector, the transform of detector pixels to $\alpha$/$\beta$ is fit by a two-dimensional polynomial, using a raster of point source observations. A polynomial transform is used to map the coordinates from $\alpha$/$\beta$ to V2/V3. We calibrated the distortion of all 198 discrete slices of the MIRI/MRS IFUs, and derived an updated Field of View (FoV) for each MRS spectral band. The precision of the distortion solution is estimated to be better than one tenth of a spatial resolution element, with a root mean square (rms) of 10 milli-arcsecond (mas) at 5 $\mu$m, to 23 mas at 27 $\mu$m. Finally we find that the wheel positioning repeatability causes an additional astrometric error of rms 30 mas. We have demonstrated the MRS astrometric calibration strategy and analysis enabling the calibration of MRS spectra, a critical step in the data pipeline especially for science with spatially resolved objects. The distortion calibration was folded into the JWST pipeline in Calibration Reference Data System (CRDS) context jwst\_1094.pmap. The distortion calibration precision meets the pre-launch requirement, and the estimated total astrometric uncertainty is 50 mas., Comment: 15 pages, 14 figures. Submitted to Astronomy & Astrophysics

Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit., Comment: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

The Medium-Resolution Spectrometer (MRS) provides one of the four operating modes of the Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST). The MRS is an integral field spectrometer, measuring the spatial and spectral distributions of light across the 5-28 $\mu m$ wavelength range with a spectral resolving power between 3700-1300. We present the MRS's optical, spectral, and spectro-photometric performance, as achieved in flight, and we report on the effects that limit the instrument's ultimate sensitivity. The MRS flight performance has been quantified using observations of stars, planetary nebulae, and planets in our Solar System. The precision and accuracy of this calibration was checked against celestial calibrators with well-known flux levels and spectral features. We find that the MRS geometric calibration has a distortion solution accuracy relative to the commanded position of 8 mas at 5 $\mu m$ and 23 mas at 28 $\mu m$. The wavelength calibration is accurate to within 9 km/sec at 5 $\mu m$ and 27 km/sec at 28 $\mu m$. The uncertainty in the absolute spectro-photometric calibration accuracy was estimated at 5.6 +- 0.7 %. The MIRI calibration pipeline is able to suppress the amplitude of spectral fringes to below 1.5 % for both extended and point sources across the entire wavelength range. The MRS point spread function (PSF) is 60 % broader than the diffraction limit along its long axis at 5 $\mu m$ and is 15 % broader at 28 $\mu m$. The MRS flight performance is found to be better than prelaunch expectations. The MRS is one of the most subscribed observing modes of JWST and is yielding many high-profile publications. It is currently humanity's most powerful instrument for measuring the mid-infrared spectra of celestial sources and is expected to continue as such for many years to come., Comment: 16 pages, 21 figures

Retrieval methods are a powerful analysis technique for modelling exoplanetary atmospheres by estimating the bulk physical and chemical properties that combine in a forward model to best-fit an observed spectrum, and they are increasingly being applied to observations of directly-imaged exoplanets. We have adapted TauREx3, the Bayesian retrieval suite, for the analysis of near-infrared spectrophotometry from directly-imaged gas giant exoplanets and brown dwarfs. We demonstrate TauREx3's applicability to sub-stellar atmospheres by presenting results for brown dwarf benchmark GJ 570D which are consistent with previous retrieval studies, whilst also exhibiting systematic biases associated with the presence of alkali lines. We also present results for the cool exoplanet 51 Eri b, the first application of a free chemistry retrieval analysis to this object, using spectroscopic observations from GPI and SPHERE. While our retrieval analysis is able to explain spectroscopic and photometric observations without employing cloud extinction, we conclude this may be a result of employing a flexible temperature-pressure profile which is able to mimic the presence of clouds. We present Bayesian evidence for an ammonia detection with a 2.7$\sigma$ confidence, the first indication of ammonia in an exoplanetary atmosphere. This is consistent with this molecule being present in brown dwarfs of a similar spectral type. We demonstrate the chemical similarities between 51 Eri b and GJ 570D in relation to their retrieved molecular abundances. Finally, we show that overall retrieval conclusions for 51 Eri b can vary when employing different spectral data and modelling components, such as temperature-pressure and cloud structures.

We present initial results from JWST NIRSpec integral field unit observations of the nearby Supernova (SN) 1987A. The observations provide the first spatially-resolved spectroscopy of the ejecta and equatorial ring (ER) over the 1-5 \mu m range. We construct 3D emissivity maps of the [Fe I] 1.443 \mu m line from the inner ejecta and the He I 1.083 \mu m line from the reverse shock (RS), where the former probes the explosion geometry and the latter traces the structure of the circumstellar medium. We also present a model for the integrated spectrum of the ejecta. The [Fe I] 3D map reveals a highly-asymmetric morphology resembling a broken dipole, dominated by two large clumps with velocities of ~2300 km/s. We also find evidence that the Fe-rich inner ejecta have started to interact with the RS. The RS surface traced by the He I line extends from just inside the ER to higher latitudes on both sides of the ER with a half-opening angle ~45 degrees, forming a bubble-like structure. The spectral model for the ejecta allows us to identify the many emission lines, including numerous H_2 lines. We find that the H_2 is most likely excited by far-UV emission, while the metal lines ratios are consistent with a combination of collisional excitation and recombination in the low-temperature ejecta. We also find several high-ionization coronal lines from the ER, requiring a temperature > 2 \times 10^6 K., Comment: Accepted for publication in ApJL

The MRS is one of the four observing modes of JWST/MIRI. Using JWST in-flight data of unresolved (point) sources, we can derive the MRS absolute spectral response function (ASRF) starting from raw data. Spectral fringing plays a critical role in the derivation and interpretation of the MRS ASRF. In this paper, we present an alternative way to calibrate the data. Firstly, we aim to derive a fringe correction that accounts for the dependence of the fringe properties on the MIRI pupil illumination and detector pixel sampling of the point spread function. Secondly, we aim to derive the MRS ASRF using an absolute flux calibrator observed across the full 5 to 28 $\mu$m wavelength range of the MRS. Thirdly, we aim to apply the new ASRF to the spectrum of a G dwarf and compare with the output of the JWST/MIRI default data reduction pipeline. Finally, we examine the impact of the different fringe corrections on the detectability of molecular features in the G dwarf and K giant. The absolute flux calibrator HD 163466 (A-star) is used to derive tailored point source fringe flats at each of the default dither locations of the MRS. The fringe-corrected point source integrated spectrum of HD 163466 is used to derive the MRS ASRF using a theoretical model for the stellar continuum. A cross-correlation is run to quantify the uncertainty on the detection of CO, SiO, and OH in the K giant and CO in the G dwarf for different fringe corrections. The point-source-tailored fringe correction and ASRF are found to perform at the same level as the current corrections, beating down the fringe contrast to the sub-percent level, whilst mitigating the alteration of real molecular features. The same tailored solutions can be applied to other MRS unresolved targets. A pointing repeatability issue in the MRS limits the effectiveness of the tailored fringe flats is at short wavelengths., Comment: 17 pages, 15 figures, updated to accepted version (results did not change)

We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the MIRI LRS performance, we performed two independent analyses of the data. We find that with a single transit observation we reached a spectro-photometric precision of $\sim$50 ppm in the 7-8 \micron range at R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged transit depth is 524 $\pm$ 15 ppm and 547 $\pm$ 13 ppm for the two applied analysis methods, respectively, recovering the known transit depth to within 1 $\sigma$. The measured noise in the planet's transmission spectrum is approximately 15-20 \% higher than random noise simulations over wavelengths $6.8 \lesssim \lambda \lesssim 11$ $\mu$m. \added{We observed an larger excess noise at the shortest wavelengths of up to a factor of two, for which possible causes are discussed.} This performance was achieved with limited in-flight calibration data, demonstrating the future potential of MIRI for the characterization of exoplanet atmospheres., Comment: Accepted for publishing in PASP, 21 pages, 10 figures

We describe the sources of stray light and thermal background that affect JWST observations, report actual backgrounds as measured from commissioning and early-science observations, compare these background levels to prelaunch predictions, estimate the impact of the backgrounds on science performance, and explore how the backgrounds probe the achieved configuration of the deployed observatory. We find that for almost all applications, the observatory is limited by the irreducible astrophysical backgrounds, rather than scattered stray light and thermal self-emission, for all wavelengths lambda < 12.5 micron, thus meeting the level 1 requirement. This result was not assured given the open architecture and thermal challenges of JWST, and it is the result of meticulous attention to stray light and thermal issues in the design, construction, integration, and test phases. From background considerations alone, JWST will require less integration time in the near-infrared compared to a system that just met the stray-light requirements; as such, JWST will be even more powerful than expected for deep imaging at 1-5 micron. In the mid-infrared, the measured thermal backgrounds closely match prelaunch predictions. The background near 10 micron is slightly higher than predicted before launch, but the impact on observations is mitigated by the excellent throughput of MIRI, such that instrument sensitivity will be as good as expected prelaunch. These measured background levels are fully compatible with JWST's science goals and the Cycle 1 science program currently underway., Comment: Published as part of the "JWST Overview" special issue of PASP. 18 pages, 9 figures

Characterization of directly imaged exoplanets is one of the most eagerly anticipated science functions of the James Webb Space Telescope. MIRI, the mid-IR instrument has the capability to provide unique spatially resolved photometric data points in a spectral range never achieved so far for such objects. We aim to present the very first on-sky contrast measurements of the MIRI's coronagraphs. In addition to a classical Lyot coronagraph at the longest wavelength, this observing mode implements the concept of the four quadrant phase mask for the very first time in a space telescope. We observed single stars together with a series of reference stars to measure raw contrasts as they are delivered on the detector, as well as reference subtracted contrasts. MIRI's coronagraphs achieve raw contrasts greater than $10^3$ at the smallest angular separations (within $1''$) and about $10^5$ further out (beyond $5\sim6''$). Subtracting the residual diffracted light left unattenuated by the coronagraph has the potential to bring the final contrast down to the background and detector limited noise floor at most angular separations (a few times $10^4$ at less than $1''$). MIRI coronagraphs behave as expected from simulations. In particular the raw contrasts for all four coronagraphs are fully consistent with the diffractive model. Contrasts obtained with subtracting reference stars also meet expectations and are fully demonstrated for two four quadrant phase masks (F1065C and F1140C). The worst contrast, measured at F1550C, is very likely due to a variation of the phase aberrations at the primary mirror during the observations, and not an issue of the coronagraph itself. We did not perform reference star subtraction with the Lyot mask at F2300C, but we anticipate that it would bring the contrast down to the noise floor., Comment: submitted to A&A

This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies., Comment: 5th version as accepted to PASP; 31 pages, 18 figures; https://iopscience.iop.org/article/10.1088/1538-3873/acb293

The Medium Resolution Spectrometer on board JWST/MIRI will give access to mid-IR spectra while retaining spatial information. With the unparalleled sensitivity of JWST and the MIRI detectors, the MRS has the potential to revolutionise our understanding of giant exoplanet atmospheres. Molecular mapping is a promising detection and characterisation technique used to study the spectra of directly imaged exoplanets. We aim to examine the feasibility and application of this technique to MRS observations. We used the instrument simulator MIRISIM to create mock observations of resolved star and exoplanet systems. As an input for the simulator, we used stellar and planet parameters from literature, with the planet spectrum being modelled with the radiative transfer code petitRADTRANS. After processing the raw data with the JWST pipeline, we high pass filter the data to account for the stellar point spread function, and used a forward modelling approach to detect the companions and constrain the chemical composition of their atmospheres through their molecular signatures. We identified limiting factors in spectroscopic characterisation of directly imaged exoplanets with the MRS and simulated observations of two representative systems, HR8799 and GJ504. In both systems, we could detect the presence of multiple molecules that were present in the input model of their atmospheres. We used two different approaches with single molecule forward models, used in literature, that are sensitive to detecting mainly H$_2$O, CO, CH$_4$, and NH$_3$, and a log-likelihood ratio test that uses full atmosphere forward models and is sensitive to a larger number of less dominant molecular species. We show that the MIRI MRS can be used to characterise widely separated giant exoplanets in the mid-IR using molecular mapping., Comment: 18 pages, 10 figures. Accepted for publication in Astronomy & Astrophysics

The Mid-Infrared Instrument (MIRI) on-board JWST will provide imaging, coronagraphy, low-resolution spectroscopy and medium-resolution spectroscopy at unprecedented sensitivity levels in the mid-infrared wavelength range. The Medium-Resolution Spectrometer (MRS) of MIRI is an integral field spectrograph that provides diffraction-limited spectroscopy between 4.9 and 28.3 um, within a FOV varying from 13 to 56" square. From ground testing, we calculate the physical parameters essential to general observers and calibrating the wavelength solution and resolving power of the MRS is critical for maximising the scientific performance of the instrument. We have used ground-based observations of discrete spectral features in combination with Fabry-Perot etalon spectra to characterize the wavelength solution and spectral resolving power of the MRS. We present the methodology used to derive the MRS spectral characterisation, which includes the precise wavelength coverage of each MRS sub-band, computation of the resolving power as a function of wavelength, and measuring slice-dependent spectral distortions. The resolving power varies from R3500 in channel 1 to R1500 in channel 4. Based on the ground test data, the wavelength calibration accuracy is estimated to be below one tenth of a pixel, with small systematic shifts due to the target position within a slice for unresolved sources, that have a maximum amplitude of about 0.25 spectral resolution elements. Based on ground test data, the MRS complies with the spectral requirements for both the R and wavelength accuracy for which it was designed. We also present the commissioning strategies and targets that will be followed to update the spectral characterisation of the MRS., Comment: 13 pages. Accepted for publication in A&A

The Mid-infrared ELT Imager and Spectrograph (METIS) will provide the Extremely Large Telescope (ELT) with a unique window to the thermal- and mid-infrared (3 - 13 microns). Its single-conjugate adaptive optics (SCAO) system will enable high contrast imaging and integral field unit (IFU) spectroscopy (R~100,000) at the diffraction limit of the ELT. This article describes the science drivers, conceptual design, observing modes, and expected performance of METIS., Comment: 5 pages, 3 figures, published in the ESO Messenger

Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project., Comment: SPIE Astronomical Telescopes + Instrumentation 2020, Ground-based and Airborne Instrumentation for Astronomy VIII

Arsenic doped back illuminated blocked impurity band (BIBIB) silicon detectors have advanced near and mid-IR astronomy for over thirty years; they have high quantum efficiency (QE), especially at wavelengths longer than 10 $\mu$m, and a large spectral range. Their radiation hardness is also an asset for space based instruments. Three examples of Si:As BIBIB arrays are used in the Mid-InfraRed Instrument (MIRI) of the James Webb Space Telescope (JWST), observing between 5 and 28 $\mu$m. In this paper, we analyze the parameters leading to high quantum efficiency (up to $\sim$ 60\%) for the MIRI devices between 5 and 10 $\mu$m. We also model the cross-shaped artifact that was first noticed in the 5.7 and 7.8 $\mu$m Spitzer/IRAC images and has since also been imaged at shorter wavelength ($\le 10~\mu$m) laboratory tests of the MIRI detectors. The artifact is a result of internal reflective diffraction off the pixel-defining metallic contacts to the readout detector circuit. The low absorption in the arrays at the shorter wavelengths enables photons diffracted to wide angles to cross the detectors and substrates multiple times. This is related to similar behavior in other back illuminated solid-state detectors with poor absorption, such as conventional CCDs operating near 1 $\mu$m. We investigate the properties of the artifact and its dependence on the detector architecture with a quantum-electrodynamic (QED) model of the probabilities of various photon paths. Knowledge of the artifact properties will be especially important for observations with the MIRI LRS and MRS spectroscopic modes., Comment: 17 pages, 15 figures, accepted for publication in PASP

The Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope (JWST), has imaging, four coronagraphs and both low and medium resolution spectroscopic modes . Being able to simulate MIRI observations will help commissioning of the instrument, as well as get users familiar with representative data. We designed the MIRI instrument simulator (MIRISim) to mimic the on-orbit performance of the MIRI imager and spectrometers using the Calibration Data Products (CDPs) developed by the MIRI instrument team. The software encorporates accurate representations of the detectors, slicers, distortions, and noise sources along the light path including the telescope's radiative background and cosmic rays. The software also includes a module which enables users to create astronomical scenes to simulate. MIRISim is a publicly available Python package that can be run at the command line, or from within Python. The outputs of MIRISim are detector images in the same uncalibrated data format that will be delivered to MIRI users. These contain the necessary metadata for ingestion by the JWST calibration pipeline., Comment: 10 pages, 8 figures. Accepted for publication by MNRAS

The constructive and destructive interference in different layers of the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) detector arrays modulate the detected signal as a function of wavelength. Additionally, sources of different spatial profiles show different fringe patterns. Dividing by a static fringe flat could hamper the scientific interpretation of sources whose fringes do not match that of the fringe flat. We find point source fringes measured by the MIRI Medium-Resolution Spectrometer (MRS) to be reproducible under similar observing conditions. We want, thus, to identify the variables, if they exist, that would allow for a parametrization of the signal variations induced by point source fringe modulations. We do this by analyzing MRS detector plane images acquired on the ground. We extracted the fringe profile of multiple point source observations and studied the amplitude and phase of the fringes as a function of field position and pixel sampling of the point spread function of the optical chain. A systematic variation in the amplitude and phase of the point source fringes is found over the wavelength range covered by the test sources (4.9-5.8 $\mu$m). The variation depends on the fraction of the point spread function seen by the detector pixel. We identify the non-uniform pixel illumination as the root cause of the reported systematic variation. We report an improvement after correction of 50% on the 1$\sigma$ standard deviation of the spectral continuum. A 50% improvement is also reported in line sensitivity for a benchmark test with a spectral continuum of 100 mJy. The improvement in the shape of weak lines is illustrated using a T Tauri model spectrum. Consequently, we verify that fringes of extended sources and potentially semi-extended sources and crowded fields can be simulated by combining multiple point source fringe transmissions., Comment: 17 pages, 31 figures

The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected light, a compelling alternative to characterize planetary atmospheres is the mid-infrared waveband (5-20~$\mu$m). Indeed, mid-infrared observations provide key information on the presence of an atmosphere, the surface conditions (e.g., temperature, pressure, habitability), and the atmospheric composition in important species such as H$_2$O, CO$_2$, O$_3$, CH$_4$, and N$_2$O. This information is essential to investigate the potential habitability of exoplanets and to make progress towards the search for life in the universe. Obtaining high-quality mid-infrared spectra of exoplanets from the ground is however extremely challenging due to the overwhelming brightness and turbulence of Earth's atmosphere. In this paper, we present a concept of space-based mid-infrared interferometer that can tackle this observing challenge and discuss the main technological developments required to launch such a sophisticated instrument., Comment: 20 page, 3 figures, 1 table

The Mid-Infrared Instrument (MIRI) for the {\em James Webb Space Telescope} (JWST) will revolutionize our understanding of infrared stellar populations in the Local Volume. Using the rich {\em Spitzer}-IRS spectroscopic data-set and spectral classifications from the Surveying the Agents of Galaxy Evolution (SAGE)-Spectroscopic survey of over a thousand objects in the Magellanic Clouds, the Grid of Red supergiant and Asymptotic giant branch star ModelS ({\sc grams}), and the grid of YSO models by Robitaille et al. (2006), we calculate the expected flux-densities and colors in the MIRI broadband filters for prominent infrared stellar populations. We use these fluxes to explore the {\em JWST}/MIRI colours and magnitudes for composite stellar population studies of Local Volume galaxies. MIRI colour classification schemes are presented; these diagrams provide a powerful means of identifying young stellar objects, evolved stars and extragalactic background galaxies in Local Volume galaxies with a high degree of confidence. Finally, we examine which filter combinations are best for selecting populations of sources based on their JWST colours., Comment: 16 pages, 7 figures, 2 online tables; accepted for publication in ApJ

We describe the sources of stray light and thermal background that affect JWST observations; report actual backgrounds as measured from commissioning and early science observations; compare those background levels to pre-launch predictions; estimate the impact of the backgrounds on science performance; and explore how the backgrounds probe the achieved configuration of the deployed observatory. We find the observatory is limited by the irreducible astrophysical backgrounds, rather than scattered stray light and thermal self-emission, for all wavelengths λ<12.5 micron, thus meeting the level 1 requirement. This result was not assured given the open architecture and thermal challenges of JWST, and is the result of meticulous attention to stray light and thermal issues in the design, construction, integration, and test phases. From background considerations alone, JWST will require less integration time in the near-infrared compared to a system that just met the stray light requirements; as such, JWST will be even more powerful than expected for deep imaging at 1--5 micron. In the mid-infrared, the measured thermal backgrounds closely match pre-launch predictions. The background near 10 micron is slightly higher than predicted before launch, but the impact on observations is mitigated by the excellent throughput of MIRI, such that instrument sensitivity will be as good as expected pre-launch. These measured background levels are fully compatible with JWST's science goals and the Cycle 1 science program currently underway.

This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies.

The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study., Comment: 12 pages, in Ground-based and Airborne Instrumentation for Astronomy VI, 2016, Proc. SPIE 9908, 23

The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is the only mid-IR Integral Field Spectrometer on board James Webb Space Telescope. The complexity of the MRS requires a very specialized pipeline, with some specific steps not present in other pipelines of JWST instruments, such as fringe corrections and wavelength offsets, with different algorithms for point source or extended source data. The MRS pipeline has also two different variants: the baseline pipeline, optimized for most foreseen science cases, and the optimal pipeline, where extra steps will be needed for specific science cases. This paper provides a comprehensive description of the MRS Calibration Pipeline from uncalibrated slope images to final scientific products, with brief descriptions of its algorithms, input and output data, and the accessory data and calibration data products necessary to run the pipeline., Comment: 10 pages, 8 figures

The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the delivered image quality, dispersion, and resolving power, as well as spectrophotometric performance, flatfield accuracy and the effects of fringing. We describe the operational concept of the slitless mode, which is optimally suited to transit spectroscopy of exoplanet atmospheres. The LRS mode of the MIRI was found to perform consistently with its requirements and goals., Comment: published in PASP, vol. 127, issue 953, pp.623-632, 2015

Context. Characterization of directly imaged exoplanets is one of the most eagerly anticipated science functions of the James Webb Space Telescope. MIRI, the mid-IR instrument, has the capability to provide unique spatially resolved photometric data points in a spectral range never before achieved for such objects. Aims. We aim to present the very first on-sky contrast measurements of the MIRI coronagraphs. In addition to a classical Lyot coronagraph at the longest wavelength, this observing mode implements the concept of the four-quadrant phase mask for the very first time in a space telescope. Methods. We observed single stars together with a series of reference stars to measure raw contrasts as they are delivered on the detector, as well as reference-subtracted contrasts. Results. The MIRI coronagraphs achieve raw contrasts better than 10−3 at the smallest angular separations (within 1″) and about 10−5 farther out (beyond 5 ~ 6″). Subtracting the residual diffracted light left behind the coronagraph has the potential to bring the final contrast down to the background- and detector-limited noise floor at most angular separations (a few times 10−5 at less than 1″). Conclusions. The MIRI coronagraphs behave as expected from simulations. In particular, the raw contrasts for all four coronagraphs are fully consistent with the diffractive model. Contrasts obtained by subtracting reference stars also meet expectations and are fully demonstrated for two four-quadrant phase masks (F1065C and F1140C). The worst contrast, measured at F1550C, is very likely due to a variation in the phase aberrations at the primary mirror during the observations, and not an issue with the coronagraph itself. We did not perform reference star subtraction with the Lyot mask at F2300C, but we anticipate that it would bring the contrast down to the noise floor.

We describe the design and performance of the Medium Resolution Spectrometer (MRS) for the JWST-MIRI instrument. The MRS incorporates four coaxial spectral channels in a compact opto-mechanical layout that generates spectral images over fields of view up to 7.7 X 7.7 arcseconds in extent and at spectral resolving powers ranging from 1,300 to 3,700. Each channel includes an all-reflective integral field unit (IFU): an 'image slicer' that reformats the input field for presentation to a grating spectrometer. Two 1024 X 1024 focal plane arrays record the output spectral images with an instantaneous spectral coverage of approximately one third of the full wavelength range of each channel. The full 5 to 28.5 micron spectrum is then obtained by making three exposures using gratings and pass-band-determining filters that are selected using just two three-position mechanisms. The expected on-orbit optical performance is presented, based on testing of the MIRI Flight Model and including spectral and spatial coverage and resolution. The point spread function of the reconstructed images is shown to be diffraction limited and the optical transmission is shown to be consistent with the design expectations.

In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and mechanical design. We show that the test data, as measured during the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton Laboratory, and at the NASA Goddard Space Flight Center, indicate that the instrument complies with its design requirements and goals. We also discuss the operational requirements (multiple dithers and exposures) needed for optimal scientific utilization of the MIRIM., Comment: 29 pages, 9 figures

We describe the operations concept and data reduction plan for the Mid- Infrared Instrument (MIRI) for the James Webb Space Telescope (JWST). The overall JWST operations concept is to use Observation Templates (OTs) to provide a straightforward and intuitive way for users to specify observations. MIRI has four OTs that correspond to the four observing modes: 1.) Imaging, 2.) Coronagraphy, 3.) Low Resolution Spectroscopy, and 4.) Medium Resolution Spectroscopy. We outline the user choices and expansion of these choices into detailed instrument operations. The data reduction plans for MIRI are split into three stages, where the specificity of the reduction steps to the observation type increases with stage. The reduction starts with integration ramps: stage 1 yields uncalibrated slope images; stage 2 calibrates the slope images; and then stage 3 combines multiple calibrated slope images into high level data products (e.g. mosaics, spectral cubes, and extracted source information). Finally, we give examples of the data and data products that will be derived from each of the four different OTs.

We present an estimate of the performance that will be achieved during on orbit operations of the JWST Mid Infrared Instrument, MIRI. The efficiency of the main imager and spectrometer systems in detecting photons from an astronomical target are presented, based on measurements at sub-system and instrument level testing, with the end-to-end transmission budget discussed in some detail. The brightest target fluxes that can be measured without saturating the detectors are provided. The sensitivity for long duration observations of faint sources is presented in terms of the target flux required to achieve a signal to noise ratio of 10 after a 10,000 second observation. The algorithms used in the sensitivity model are presented, including the understanding gained during testing of the MIRI Flight Model and flight-like detectors.

The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around post-main-sequence stars, the near-nuclear environments in active galaxies, and the host galaxies of distant quasars. This paper describes the coronagraphic observing modes of MIRI, as well as performance estimates based on measurements of the MIRI flight model during cryo-vacuum testing. A brief outline of coronagraphic operations is also provided. Finally, simulated MIRI coronagraphic observations of a few astronomical targets are presented for illustration.