Search

IntroductionBuildings that constitute cultural heritage and that are the identity of a defined geographical area are increasingly being restored to offer the community historical places to enjoy. Often the restoration preserves the original structure and building materials, which are usually natural stones. In this study, a radioprotection protocol dedicated to this kind of built environment was proposed and validated.MethodsAfter identifying the two predominant types of building material stones (Rosso ammonitico and Pietra Serena), radiometric measurements for natural gamma-emitting radionuclides (Ra-226, Th-232, and K-40) and measurements of the emanation coefficient and calculation of the exhalation rate of radon gas were carried out.ResultsThe two types of stone have a content of natural radionuclides that do not exceed the levels recommended by the regulations. The difference between the two types of stone is of an order of magnitude indicating that the red ammonite has a greater radiological impact than the pietra serena.DiscussionThe results, in addition to ensuring the radioprotection of the population, highlighted the need to increase the number of this kind of investigations to implement scientific knowledge and serve the stakeholders involved.

The stiffness of the extracellular matrix plays a crucial role in cell motility and spreading, influencing cell morphology through cytoskeleton organization and transmembrane proteins’ expression. In this context, mechanical characterization of both cells and the extracellular matrix gains prominence for enhanced diagnostics and clinical decision-making. Here, we investigate the combined effect of mechanotransduction and ionizing radiations on altering cells’ mechanical properties, analysing mammary cell lines (MCF10A and MDA-MB-231) after X-ray radiotherapy (2 and 10 Gy). We found that ionizing radiations sensitively affect adenocarcinoma cells cultured on substrates mimicking cancerous tissue stiffness (15 kPa), inducing an increased structuration of paxillin-rich focal adhesions and cytoskeleton: this process translates in the augmentation of tension at the actin filaments level, causing cellular stiffness and consequently affecting cytoplasmatic/nuclear morphologies. Deeper exploration of the intricate interplay between mechanical factors and radiation should provide novel strategies to orient clinical outcomes.

Abstract The biological effects of ionizing radiation are exploited in the clinical practice of radiotherapy to destroy tumour cells while sparing the surrounding normal tissue. While most of the radiotherapy research focused on DNA damage and repair, recently a great attention is going to cells' interactions with the mechanical microenvironment of both malignant and healthy tissues after exposure. In fact, the stiffness of the extracellular matrix can modify cells' motility and spreading through the modulation of transmembrane proteins and surface receptors' expression, such as CD-44. CD-44 receptor has held much interest also in targeted-therapy due to its affinity with hyaluronic acid, which can be used to functionalize biodegradable nanoparticles loaded with chemotherapy drugs for targeted therapy. We evaluated changes in CD-44 expression in two mammary carcinoma cell lines (MCF10A and MDA-MB-231) after exposure to X-ray (2 or 10 Gy). To explore the role of the mechanical microenvironment, we mimicked tissues' stiffness with polyacrylamide's substrates producing two different elastic modulus values (0.5 and 15 kPa). We measured a dose dependent increase in CD-44 relative expression in tumour cells cultured in a stiffer microenvironment. These findings highlight a crucial connection between the mechanical properties of the cell's surroundings and the post-radiotherapy expression of surface receptors.

Introduction: Risk assessment of exposure to indoor pollutants plays an increasingly important role in human protection, and one of the main sources of indoor pollutants is building materials (BMs). In addition, production processes, including those related to BMs, are also involved in economic transition: the use of by-products from other industrial sectors as raw materials for the production processes in compliance with environmental sustainability is evaluated.Methods: In this work, we evaluate not only the radiation protection of BMs but also the possibility of adopting the circular economy principles. The two main objectives of this study were 1) radiometric characterization and calculation of Index I of pozzolan from Altavilla Irpina (Avellino) in Italy, used as a natural igneous additive for concrete, using gamma spectroscopy, and 2) comparison of different methodologies for calculating the annual effective dose of BMs (CEN/TR 17113:2017, RESRAD-BUILD software, and a previously developed experimental method). The same approach was extended to the possibility of reusing fly ash—a naturally occurring radioactive material (NORM) by-product of coal combustion in thermal power plants—for the production of concrete.Results and Discussion: The study aligns with the principles linked to the circular economy to extend the life cycle of materials by reducing the need for natural resources, suggesting a possible positive compromise between radioprotection and preservation of environmental heritage.

Radon gas is one of the chemical pollutants with one of the most significant physical effects due to its impact on human health: it is a radioactive noble gas which, if inhaled, can stochastically induce lung cancer. For this reason, it is classified as a category A substance and is the second cause of cancer after tobacco smoking. The monitoring and management of indoor radon is based on international recommendations but also national regulations, which, in recent years, have been updated by lowering the reference levels. In this work, some radon activity concentration data were evaluated by comparing the criteria of old and new legislation to highlight how the radiation protection approach has completely changed. Specifically, this study focuses on measurements in Campania, which, due to its originally volcanic geological structure, requires crucial attention in the context of radon risk assessment, given the considerable number of dwellings built in tuff. This initial data processing enabled the identification of potential high-priority radon risk areas, serving as an important reference point for the extension of the monitoring activities in Campania.

Radon, a radioactive inert gas that comes from the decay of naturally occurring radioactive species, poses a substantial health risk due to its involvement in lung cancer carcinogenesis. This work proposes a metrological approach for determining radon exhalation rates from diverse building materials. This methodology employs an electrostatic collection chamber for alpha spectrometry of radon isotopic decay products. Experimental evaluations were conducted particularly focusing on volcanic gray tuff from Sant’Agata de’ Goti (Campania region, Italy), a material commonly utilized in construction, to assess radon exhalation rates. The study aligns with Legislative Decree 101/2020, a transposition of European Directive 59/2013/Euratom, highlighting the need to identify materials with a high risk of radon exhalation. Moreover, this work supports the goals of the Italian National Radon Action Plan related to the aforementioned decree, aiming to develop methodologies for estimating radon exhalation rates from building materials and improving radioprotection practices.

Drinking water, in addition to the best-known chemical and biological agents, contains radionuclides of both natural and artificial origin, which can contribute significantly to the overall effective dose received by the population. The Italian Decree Law 28/2016, implementing the 2013/51/EURATOM Directive, establishes the activities for risk management and the parameter values for different radionuclide activity concentrations. In addition to the institutions involved, the National Inspectorate for Nuclear Safety and Radiation Protection (ISIN) annually publishes monitoring reports of environmental radioactivity in Italy, including radioactivity in drinking water. The purpose of the study was to integrate ISIN reports with 2018–2020 data by collecting measurements performed by institutional laboratories to obtain more complete information and adding, for the Campania region, some data not yet published. This new updated report was not significantly different from ISIN’s one, meaning that those publications are nevertheless extremely representative of the radioactivity in Italian drinking water. However, the study allowed us to obtain more detailed data, including measurements not considered in ISIN reports, for instance, radon-222 activity concentrations. This may be of great usefulness for all radiation protection stakeholders in order to ensure environmental protection, pollution prevention, and population safety.

The microenvironment of breast cancer actively participates in tumorigenesis and cancer progression. The changes observed in the architecture of the extracellular matrix initiate an oncogene-mediated cell reprogramming, that leads to a massive triggering of YAP nuclear entry, and, therefore, to cancer cell proliferation, invasion and probably to increased radiation-resistance. However, it is not yet fully understood how radiotherapy regulates the expression and subcellular localization of YAP in breast cancer cells experiencing different microenvironmental stiffnesses. To elucidate the role of extracellular matrix stiffness and ionizing radiations on YAP regulation, we explored the behaviour of two different mammary cell lines, a normal epithelial cell line (MCF10A) and a highly aggressive and invasive adenocarcinoma cell line (MDA-MB-231) interacting with polyacrylamide substrates mimicking the mechanics of both normal and tumour tissues (∼1 and ∼13 kPa). We report that X-ray radiation affected in a significant way the levels of YAP expression, density, and localization in both cell lines. After 24 h, MCF10A and MDA-MB-231 increased the expression level of YAP in both nucleus and cytoplasm in a dose dependent manner and particularly on the stiffer substrates. After 72 h, MCF10A reduced mostly the YAP expression in the cytoplasm, whereas it remained high in the nucleus of cells on stiffer substrates. Tumour cells continued to exhibit higher levels of YAP expression, especially in the cytoplasmic compartment, as indicated by the reduction of nuclear/cytoplasmic ratio of total YAP. Then, we investigated the existence of a correlation between YAP localization and the expression of the nuclear envelope protein lamin A/C, considering its key role in modulating nuclear deformability and changes in YAP shuttling phenomena. As supposed, we found that the effects of radiation on YAP nucleus/cytoplasmic expression ratio, increasing in healthy cells and decreasing in tumour ones, were accompanied by lower and higher lamin A/C levels in MCF10A and MDA-MB-231 cells, respectively. These findings point to obtain a deeper knowledge of the role of the extracellular matrix and the effects of X-rays on YAP and lamin A/C expression that can be used in the design of doses and timing of radiation therapy.

Outreach projects are often used to a limited extent for dissemination purposes and rarely have a significant impact on the student’s teaching and technical skills. The RadioLab project requires a proactive interaction between researchers and students by experimental activities for measuring environmental radioactivity, in particular radon gas. Buildings considered to be of radiological interest, such as schools, have been selected to carry out radon gas activity concentration measurements using solid-state nuclear track passive detectors LR-115. The results of annual measurements, made over 6 years and involving a total of 952 rooms, distributed in 67 schools throughout the Campania region, were collected. These data, deemed scientifically reliable (i) can be overlapped over geological characterization data enhancing the relationship between lithology and radon, (ii) confirmed data from the radon potential map of the Campania region about the distribution of indoor radon, and finally (iii) contributed to the collection of radon indoor data of the Campania region. The results obtained highlighted the need and effectiveness of increasing the network of schools involved in the outreach activity and in the implementation of experimental activities with applicative effects in the scientific and research sectors.

The interest in radiation protection in industrial sectors involving Naturally Occurring Radioactive Materials (NORM) is increasingly growing. This is due also to the recent implementation of the European Council Directive 59/2013/Euratom which in Italy and in the other European Union Member States extends the field of application to industrial sectors never involved before. This paper reports main results of a research project on radiation protection in industries involving NORM carried out in Italy aimed to provide useful tools for stakeholders to comply new legal obligations. The project activities were mainly focused on different aspects relevant to the NORM involving industries, accounting for the positive list reported in the Italian law. Firstly, the inventory of the industries currently operating in Italy in order to identify the industrial sectors with an important radiological impact on population and workers was updated. Based on this information, a general methodology was elaborated taking into account a graded approach. The first phase consists in the identification and characterization of the most critical exposure scenarios and of the radiological content of NORMs involved in the different phases of the industrial processes. In the second phase calculation methods were developed for dose estimation for workers and members of public. These tools require the use of existing and well tested calculation codes, and the development of a dedicated user-friendly software.

Surface brachytherapy (BT) lacks standard quality assurance (QA) protocols. Commercially available treatment planning systems (TPSs) are based on a dose calculation formalism that assumes the patient is made of water, resulting in potential deviations between planned and delivered doses. Here, a method for treatment plan verification for skin surface BT is reported. Chips of thermoluminescent dosimeters (TLDs) were used for dose point measurements. High-dose-rate treatments were simulated and delivered through a custom-flap applicator provided with four fixed catheters to guide the Iridium-192 (Ir-192) source by way of a remote afterloading system. A flat water-equivalent phantom was used to simulate patient skin. Elekta TPS Oncentra Brachy was used for planning. TLDs were calibrated to Ir-192 through an indirect method of linear interpolation between calibration factors (CFs) measured for 250 kV X-rays, Cesium-137, and Cobalt-60. Subsequently, plans were designed and delivered to test the reproducibility of the irradiation set-up and to make comparisons between planned and delivered dose. The obtained CF for Ir-192 was (4.96 ± 0.25) μC/Gy. Deviations between measured and TPS calculated doses for multi-catheter treatment configuration ranged from −8.4% to 13.3% with an average of 0.6%. TLDs could be included in clinical practice for QA in skin BT with a customized flap applicator.

Nanoparticles (NPs) coated with hyaluronic acid (HA) seem to be increasingly promising for targeted therapy due to HA chemical versatility, which allows them to bind drugs of different natures, and their affinity with the transmembrane receptor CD-44, overexpressed in tumor cells. However, an essential aspect for clinical use of NPs is formulation stability over time. For these reasons, analytical techniques capable of characterizing their physico-chemical properties are needed. In this work, poly(lactide-co-glycolide) (PLGA) NPs with an average diameter of 100–150 nm, coated with a few 10 s of nm of HA, were synthesized. For stability characterization, two complementary investigative techniques were used: Dynamic Light Scattering (DLS) and Surface-Enhanced Raman Scattering (SERS) spectroscopy. The first technique provided information on size, polidispersity index, and zeta-potential, and the second provided a deeper insight on the NP surface chemicals, allowing distinguishing of HA-coated NPs from uncoated ones. Furthermore, in order to estimate formulation stability over time, NPs were measured and monitored for two weeks. SERS results showed a progressive decrease in the signal associated with HA, which, however, is not detectable by the DLS measurements.

Neutrons constitute a significant component of the secondary cosmic rays and are one of the most important contributors to natural cosmic ray radiation background dose. The study of the cosmic ray neutrons’ contribution to the dose equivalent received by humans is an interesting and challenging task for the scientific community. In addition, international regulations demand assessing the biological risk due to radiation exposure for both workers and the general population. Because the dose rate due to cosmic radiation increases significantly with altitude, the objective of this work was to characterize the thermoluminescent dosimeter (TLDs) from the perspective of exposing them at high altitudes for longtime neutron dose monitoring. The pair of TLD-700 and TLD-600 is amply used to obtain the information on gamma and neutron dose in mixed neutron-gamma fields due to the present difference in 6Li isotope concentration. A thermoluminescence dosimeter system based on pair of TLD-600/700 was characterized to enable it for neutron dosimetry in the thermal energy range. The system was calibrated in terms of neutron ambient dose equivalent in an experimental setup using a 241Am-B radionuclide neutron source coated by a moderator material, polyethylene, creating a thermalized neutron field. Afterward, the pair of TLD-600/700 was exposed at the CERN-EU High-Energy Reference Field (CERF) facility in Geneva, which delivers a neutron field with a spectrum similar to that of secondary cosmic rays. The dosimetric system provided a dose value comparable with the calculated one demonstrating a good performance for neutron dosimetry.

For a healthy indoor environment, it is important to understand which materials and factors favor the generation of high levels of indoor radon. A preliminary multivariate statistical analysis was carried out on two datasets concerning indoor radon and building materials in the Campania Region using Principal Component Analysis (PCA) and the k-means partitional analysis technique. A total of 13 parameters related to building materials were used. The results show the greater contribution of building materials of volcanic origin to the concentration of indoor radon and thoron activity and the different influence of the parameters of the 31 materials analyzed. The same analyses applied to the indoor radon values of 694 rooms in the Campania Region were equally effective in assessing the structural characteristics of indoor environments that most influence indoor radon levels. The study provided an effective assessment of the influence on radon activity of several environmental parameters, which are often not adequately considered.

A large body of literature has demonstrated that the mechanical properties of microenvironment have a key role in regulating cancer cell adhesion, motility, and invasion. In this work, we have introduced two additional parameters, named cell trajectory extension and area traveled by cell, to describe the tendency of normal tissue and metastatic cancer cells to move in a directional way when they interact with physio-pathological substrates, characterized by stiffnesses of 1–13 kPa, before and after treatment with 2 doses of X-rays (2 and 10 Gy). We interpreted these data by evaluating also the impact of substrate stiffness on 2 morphological parameters which indicate not only the state of cell adhesion, but also cell polarization, prerequisite to directional movement, and the formation of protrusions over cell perimeters. We believe that a so wide analysis can give an efficient and easily readable overview of effects of radiation therapy on cell-ECM crosstalk when used as therapeutic agent.

The lockdown restrictions, as a first solution to contain the spread of the COVID-19 pandemic, have affected everyone’s life and habits, including the time spent at home. The latter factor has drawn attention to indoor air quality and the impact on human health, particularly for chemical pollutants. This study investigated how the increasing time indoor influenced exposure to natural radioactive substances, such as radon gas. To calculate the radiological risk, we considered the most consolidated indices used for radiation protection: annual effective dose, excess lifetime cancer risk, and the lung cancer case. Furthermore, two different exposure times were considered: pre-lockdown and post-lockdown. The lockdown increased the indoor exposure time by 4% and, consequently, the radiological risk factors by 9%. Furthermore, the reference value of 300 Bq/m3, considered acceptable for human radiation protection, may need to be lowered further in the case of conditions similar to those of the lockdown period.

The physical–chemical properties of water are closely linked to the geological nature of the site where they are located. This aspect becomes even more interesting when analyzing the natural radionuclides in the drinking water of a volcanic territory such as Campania in southern Italy. This study concerned the measurement of activity concentration of gross alpha and beta, radon, and tritium to evaluate their biological impact. The measurements were carried out using alpha spectrometry for alpha emitters, proportional counter for beta emitters, the electret system for radon in water, and finally liquid scintillation for the measurement of tritium concentration. The biological impact was assessed considering the indicative dose, if applicable, and the effective annual dose of radon. Although the results show that the values are below international and national references, the radiological characterization of drinking water is of fundamental importance to optimize the radiation protection of the population.

Proton therapy represents a technologically advanced method for delivery of radiation treatments to tumors. The determination of the biological effectiveness is one of the objectives of the MoVe IT (Modeling and Verification for Ion Beam Treatment Planning) project of the National Institute for Nuclear Physics (INFN) CSN5. The aim of the present work, which is part of the project, was to evaluate the performance of the thermoluminescent dosimeters (TLDs-100) for dose verification in the proton beam line. Four irradiation experiments were performed in the experimental room at the Trento Proton Therapy Center, where a 150 MeV monoenergetic proton beam is available. A total of 80 TLDs were used. The TLDs were arranged in one or two rows and accommodated in a specially designed water-equivalent phantom. In the experimental setup, the beam enters orthogonally to the dosimeters and is distributed along the proton beam profile, while the irradiation delivers doses of 0.8 Gy or 1.5 Gy in the Bragg peak. For each irradiation stage, the depth–dose curve was determined by the TLD readings. The results showed the good performance of the TLDs-100, proving their reliability for dose recordings in future radiobiological experiments planned within the MoVe IT context.

The cytoskeleton is involved in several biological processes, including adhesion, motility, and intracellular transport. Alterations in the cytoskeletal components (actin filaments, intermediate filaments, and microtubules) are strictly correlated to several diseases, such as cancer. Furthermore, alterations in the cytoskeletal structure can lead to anomalies in cells’ properties and increase their invasiveness. This review aims to analyse several studies which have examined the alteration of the cell cytoskeleton induced by ionizing radiations. In particular, the radiation effects on the actin cytoskeleton, cell adhesion, and migration have been considered to gain a deeper knowledge of the biophysical properties of the cell. In fact, the results found in the analysed works can not only aid in developing new diagnostic tools but also improve the current cancer treatments.

The Sassi of Matera (Basilicata region, southern Italy) is a peculiar site, but not unique in Italy, from a landscape point of view. Most of the buildings are excavated in rocks of calcarenite origin and used as homes and accommodation facilities. For this reason, the contribution of gamma radiation to the population due to this building material has been investigated for the first time. Even though the type of rock is not mentioned among the construction materials indicated in Italian Legislative Decree 101/2020 to be subjected to radiological characterization, the methodology indicated in the decree was applied, comparing the values with those present in the literature. The content of 226Ra, 232Th and 40K was then investigated with gamma spectroscopy, and the gamma index was calculated. The results obtained showed a low level of activity concentration of natural radionuclides in this type of stone, confirming the radiological safety. This result can also support the recovery and restoration initiatives for these buildings to conserve the architectural and landscape heritage of this village.

222Rn gas represents the major contributor to human health risk from environmental radiological exposure. In confined spaces radon can accumulate to relatively high levels so that mitigation actions are necessary. The Italian legislation on radiation protection has set a reference value for the activity concentration of radon at 300 Bq/m3. In this study, measurements of the annual radon concentration of 62 bank buildings spread throughout the Campania region (Southern Italy) were carried out. Using devices based on CR-39 solid-state nuclear track detectors, the 222Rn level was assessed in 136 confined spaces (127 at underground floors and 9 at ground floors) frequented by workers and/or the public. The survey parameters considered in the analysis of the results were: floor types, wall cladding materials, number of openings, door/window opening duration for air exchange. Radon levels were found to be between 17 and 680 Bq/m3, with an average value of 130 Bq/m3 and a standard deviation of 120 Bq/m3. About 7% of the results gave a radon activity concentration above 300 Bq/m3. The analysis showed that the floor level and air exchange have the most significant influence. This study highlighted the importance of the assessment of indoor radon levels for work environments in particular, to protect the workers and public from radon-induced health effects.