Search

Background: Research investigating the potential link between gingival microvascular blood flow and inflammatory status is scarce. This study aims to assess color doppler flow imaging (CDFI) and micro-flow imaging (MFI) as tools for the assessment of gingival papilla blood flow (GPBF) and to examine their diagnostic utility as a noninvasive means of detecting gingival bleeding., Methods: CDFI and MFI were used to assess the GPBF grade (0-4) of 140 anterior gingival papilla sites in advanced periodontitis patients. Correlations between GPBF grades and periodontal characteristics were examined, and diagnostic performance as a means of predicting bleeding on probing (BOP) was examined using receiver operating characteristic curves., Results: GPBF grades 0 and 1 assessed by the MFI were 14.29% and 15.71% respectively, lower than the 28.57% and 24.29% assessed by the CDFI. In contrast, MFI detected a higher frequency of GPBF grade 2 sites (40.71%) relative to CDFI (22.14%). The CDFI and MFI provided consistent results in 62.14% of the sites, while the MFI demonstrated higher ratings in rest 37.86% of the sites. A significant positive correlation was detected between GPBF grade and the modified gingival index (MGI), bleeding index (BI), BOP, and probing depth (PD). It showed high accuracy for CDFI or MFI to diagnosing BOP with a sensitivity of 80.51% and 96.43% and a specificity of 77.27% and 57.14%, respectively. Area under the receiver operator characteristic curve values when predicting BOP based on the GPBF grade determined using CDFI and MFI approaches 0.887 (95% CI 0.833-0.942) and 0.917 (95% CI 0.862-0.972), respectively, and there were no significant differences between these values (Z = - 1.502, p = 0.133)., Conclusions: Both MFI and CDFI can be employed for the evaluation of GPBF, and MFI is better suited to detecting mild inflammation. Trial registration ChiCTR2200066021 (Date of registration: 22/11/2022)., (© 2024. The Author(s).)

Background: This study highlights the need for precise and efficient methods to measure palatal mucosal thickness in the maxillary anterior teeth, particularly for soft tissue augmentation in the aesthetic zone. The research evaluates three digital imaging techniques, suggesting that Cone Beam Computed Tomography (CBCT) combined with intraoral scanners (IOS) is a promising approach for reliable clinical assessment., Methods: Ten volunteers with healthy periodontium were selected, and three methods were employed: CBCT-based indirect gingival imaging, modified soft tissue CBCT (ST-CBCT), and CBCT combined with IOS. Measurements of palatal mucosal thickness were taken at multiple points along the palatal gingival margin. Statistical analysis included Bland-Altman plots for method agreement and intraclass Correlation Coefficient (ICC) analysis for reliability. All measurements were standardized, repeated for consistency, and accurate to 0.01 mm to ensure reliability., Results: The Bland-Altman plots showed that less than 5% of the points for palatal mucosal thickness differences measured by the gingival indirect radiographic method, modified ST-CBCT, and CBCT combined with IOS were located outside the 95% limits of agreement (LoA). The mean value of the differences was within 0.2 mm, indicating good clinical agreement among the three methods. The inter- and intra-study ICC values for palatal mucosal thickness measurements of the maxillary anterior teeth using the three CBCT methods were greater than 0.75 (P < 0.001), demonstrating reproducibility., Conclusions: Based on the evaluation of three digital imaging techniques, this study indicates that the combination of CBCT with IOS is a feasible method for measuring palatal mucosal thickness in the maxillary anterior teeth and demonstrates good reproducibility., (© 2024. The Author(s).)

Objectives: The study aimed to evaluate the clinical crown length (CCL) among patients diagnosed with altered passive eruption (APE), the causes of a gummy smile, the prevalence of APE, and the correlation between parameters., Materials and Methods: A total of 86 gummy smile patients (516 teeth) underwent clinical examination and assessment using cone-beam computed tomography (CBCT), photography, and intraoral scanning., Results: Significantly shorter CCL and distance between the cementoenamel junction and bone crest (CEJ-BC) were observed among APE-affected teeth (p < 0.05). Among the patients, 56.1% of patients were diagnosed with APE, and most of them were affected by a combination of APE and hypermobile upper lip (HUL). Based on 183 APE-affected teeth, the prevalence of APE types and subtypes was as follows: APE1A (96; 19.3%), APE1B (78; 15.9%), APE2A (8; 1.6%), and APE2B (1; 0.2%). Positive correlations were found between keratinized gingival width (KGW) and bone thickness (BT), while negative correlations were observed between gingival thickness (GT) and BT., Conclusion: Shorter CCL and CEJ-BC were the highlighted features of APE. APE affected approximately half of the gummy smile patients, with most of them presenting with a combination of HUL. Almost teeth affected by APE were classified as Type I, with a nearly equal distribution between subtypes A and B., Clinical Relevance: The clinical and radiographic features of APE contribute to a better understanding of this condition and facilitate the management of patients affected by APE. Approximately half of gummy smile patients will require multidisciplinary treatment., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: To evaluate the 10-year influence of soft tissue height (STH) on crestal bone level changes (CBC) in bone-level implants with non-matching internal conical connections., Material & Methods: From the initial 97 patients, 59 (19 men, 40 women, age 55.86 ± 9.5 years) returned for the recall visit. Based on baseline STH, they were categorized into T1 (thin STH ≤2 mm, n = 33), T2 (thin STH augmented with allogenic tissue matrix (ATM), n = 32), and C (thick STH >2 mm, n = 32). Implants were placed in the posterior mandible using a one-stage approach and received single screw-retained restorations. Clinical (PPD, BOP, PI) and radiographic examinations were conducted after 10 years, with CBC calculated mesial and distal to each implant., Results: After 10 years, implants in surgically thickened (T2) or naturally thick STH (C) showed bone gains of 0.57 ± 0.55 mm and 0.56 ± 0.40 mm, respectively (p < 0.0001) shifting from an initial CBC of -0.21 ± 0.33 mm to 0.36 ± 0.29 mm in the thick STH group and -0.2 ± 0.35 mm to 0.37 ± 0.29 mm in the surgically thickened STH group. Implants in naturally thin STH yielded a non-significant trend of bone loss (-0.12 ± 0.41 mm; p > 0.05)., Conclusions: Implants in thin STH (≤2 mm) exhibited greater CBC over the study period. Significant bone gains were observed in thick STH cases, indicating that naturally thick STH or STH augmentation with ATM may contribute to maintain CBC in long-term around implants., Clinical Significance: This is the first long-term follow-up study suggesting that adequate soft tissue height around implants helps maintain stable peri‑implant bone levels. While tissue thickness plays a key role, other factors also interact with peri‑implant tissue height to sustain crestal bone stability over time., Competing Interests: Declaration of competing interest The corresponding author declares that none of the co-authors of this article have financial or personal conflicts of interest to report pertaining to the conduction of this study, (Copyright © 2024. Published by Elsevier Ltd.)

Aim: Gingival phenotype (GP) is regarded as a valuable indicator for forecasting the probability of attaining favourable aesthetic and functional results with orthodontic treatment. This study aimed to investigate the accuracy and reproducibility of cone beam computed tomography (CBCT) for assessing gingival thickness (GT) in both arches compared to the transgingival probing method. The secondary objective was to determine the optimal cut-off values for GT using CBCT., Methods: This cross-sectional study was conducted where GP was determined based on the probe transparency method (TRAN). The GT measurements were obtained by both methods at 2mm from the free gingival margin (FGM) for all teeth anterior to the first molar. The data was statistically analysed using intraclass correlation coefficient (ICC), Bland-Altman plots, and receiver operating characteristic (ROC) curves. The statistical significance level was set at a P-value<0.05., Results: The study included 60 subjects (1200 teeth). The mean GT in both the maxillary (1.14±0.17mm) and mandibular (0.94±0.15mm) arches was significantly greater (P<0.05) for the transgingival probing method than for the CBCT method. As shown in the Bland-Altman plot, the bias between the two methods was greater in the maxillary jaw (0.060; 95% CI: 0.044 to 0.076) and in individuals with a thick GP (0.096; 95% CI: 0.082 to 0.109). The optimal values for GT measurements were 1.15mm for the maxillary jaw, 1.02mm for the mandibular jaw, 1.02mm for males, and 1.09mm for females., Conclusions: CBCT exhibited notable precision in diagnosing GT, while demonstrating minimal disparities compared to the conventional transgingival probing technique, particularly evident in thin GPs, and in the mandibular dental arch. The constraints associated with the utilization of CBCT were observed in the maxillary arch and in cases with thick GP., (Copyright © 2024. Published by Elsevier Masson SAS.)

Objective: To identify the different uses and modalities of digital technologies to diagnose, plan and monitor peri-implant soft tissue conditions and aesthetics., Methods: A comprehensive narrative review of pertinent literature was conducted, critically appraising key digital technologies that may assist peri-implant soft tissue augmentation and assessment. An electronic search on four databases including studies published prior to 1st July 2023 was performed and supplemented by a manual search., Results: Predominantly, tools such as cone beam computed tomography (CBCT), intraoral scanning (iOS), intraoral ultrasonography and digital spectrophotometry were commonly to assess and monitor peri-implant soft tissues. The main clinical and research applications included: (i) initial assessment of mucosal thickness, supra-crestal tissue height and keratinized mucosa width, (ii) evaluation of peri-implant soft tissue health and inflammation, (iii) monitoring profilometric changes and midfacial mucosal margin stability over time and (iv) aesthetic evaluation through colour assessment. While evidence for some digital tools may be limited, the integration of digital technologies into peri-implant soft tissue management holds great promise. These technologies offer improved precision, comfort and speed in assessment, benefiting both patients and clinicians., Conclusion: As digital technologies progress, their full potential in peri-implant soft tissue augmentation and their value will become more evident with ongoing research. Embracing these innovations and their potential benefits is recommended to ensure that during progress in implant dentistry, patient care is not hindered., (© 2024 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Purpose: Although gingival thickness has been extensively studied in permanent dentition, the literature regarding marginal gingival thickness in primary dentition is insufficient. The purpose of this study was to assess the variations in marginal gingival thickness in preschool-age children. Methods: A cross-sectional study of 4,109 primary teeth was conducted. Using a reamer, the transgingival probing method was employed to assess marginal gingival thickness in healthy preschoolers. Inter-examiner and intra-examiner reproducibility were assessed via the intraclass correlation coefficient. Results: Descriptive statistics revealed that primary maxillary left second molars had the highest mean marginal gingival thickness (1.06 mm), whereas primary mandibular right central incisors had the lowest mean marginal gingival thickness (0.74 mm). Gender-based independent sample t-tests revealed significant differences in the values of primary maxillary right canines (females had greater values than males; P=0.03) and primary mandibular right first molars (males had greater values than females; P=0.01). An inter-arch comparison revealed significant differences between the primary second molars (maxillary more than mandibular; P=0.001). Conclusions: This study reports the first documented marginal gingival thicknesses of primary dentition. It reveals substantial variations in the values of primary maxillary right canines and primary mandibular right first molars and between primary maxillary and mandibular second molars.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ 2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes., (© 2024. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

Objectives: Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools., Materials and Methods: A total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic., Results: When the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods., Conclusions: An agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors.  CLINICAL RELEVANCE: In the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype., (© 2024. The Author(s).)

Objective: This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants., Methodology: Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters., Results: The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%)., Conclusion: Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

Background: To evaluate the risk indicators associated with midfacial gingival recessions (GR) in the natural dentition esthetic regions., Methods: Cone-beam computed tomography (CBCT) results of thirty-seven subjects presenting with 268 eligible teeth were included in the cross-sectional study. Clinical measurements included presence/absence of midfacial GR; the depth of the midfacial, mesial, and distal gingival recession; the recession type (RT); keratinized tissue width (KT); and attached gingiva width (AG). Questionnaires were utilized to capture patient-reported esthetics and dental hypersensitivity for each study tooth. Buccal bone dehiscence (cBBD) and buccal bone thickness (cBBT) were measured on the CBCT scans. High-frequency ultrasonography was performed to assess gingival thickness (GT) and buccal bone dehiscence (uBBD). Intraoral optical scanning was obtained to quantify the buccolingual position of each study site (3D profile analysis). Multilevel logistic regression analyses with generalized estimation equations were performed to assess the factors associated with the conditions of interest., Results: The presence of midfacial GR was significantly associated with the history of periodontal treatment for pocket reduction (OR 7.99, p = 0.006), KT (OR 0.62, p < 0.001), cBBD (OR 2.30, p = 0.015), GT 1.5 mm from the gingival margin (OR 0.18, p = 0.04) and 3D profile 1 mm from the gingival margin (OR 1.04, p = 0.001). The depth of midfacial GR was significantly correlated to previous history of periodontal treatment (OR 0.96, p = 0.001), KT (OR -0.18, p < 0.001), presence of bone fenestration (OR 0.24, p = 0.044), and cBBD (OR 0.43, p < 0.001). The depth of midfacial GR was also the only factor associated with patient-reported esthetics (OR -3.38, p = 0.022), while KT (OR 0.77, p = 0.018) and AG (OR 0.82, p = 0.047) were significantly correlated with patient-reported dental hypersensitivity., Conclusions: Several risk indicators of midfacial and interproximal GR in the esthetic region were identified. The use of imaging technologies allowed for detection of parameters associated with the conditions of interest, and, therefore, their incorporation in future clinical studies is advocated. Ultrasonography could be preferred over CBCT for a noninvasive assessment of periodontal phenotype., (© 2024 The Authors. Journal of Periodontology published by Wiley Periodicals LLC on behalf of American Academy of Periodontology.)

Objectives: This study aimed to evaluate the accuracy of an intraoral scanner (IOS - Medit i700) on tooth abutments with vertical preparations at 2 depths below the free gingival margin, and to determine if the IOS can reproduce the area beyond the finish surface of the tested preparation geometry., Methods: Two abutments for a maxillary first molar were designed by means of CAD software, with vertical preparations set at 1 and 2 mm below the gingiva. These abutments were subsequently printed in resin and placed on a reference model. The reference files consisted of scans made using a metrological machine on these abutments. Ten scans were made with the tested IOS on each sample, resulting in two study groups. The scans from the experimental groups were labeled "V-1″ for vertical preparation at 1 mm below the gingival margin and "V-2″ for 2 mm below. The analysis of these scans was performed using Geomagic Control X (3D SYSTEMS) to assess their trueness and precision in µm. Descriptive statistics with a 95 % confidence interval were employed, alongside independent sample tests, to ascertain any differences between the groups (α=0.05)., Results: Statistically significant differences were not found both for trueness (p=.104) and precision (p=.409), between the tested geometries. The mean values for trueness were V-1 = 37.5[31.4-43.6]; V-2 = 32.6[30.6-34.6]. About the precision, the mean values were V-1 = 20.5[8.4-32.5]; V-2 = 18.4[8.2-28.5]. In both the study groups, it was possible to detect the surface beyond the finish area., Conclusions: Within the limitations of this study, vertical preparation design allows for registration of the tooth anatomy beyond the finish area with IOS. Moreover, the mean accuracy values were clinically acceptable at both 1 and 2 mm below the gingival margin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Purpose: To study the degree of accuracy in gingival shade matching of undergraduate students using a computer application., Materials and Methods: In total, 76 undergraduate dental students' gingival shade selection abilities were evaluated using an in-house developed computer application. A total of 15 intraoral gingival photographs and 21 pink gingival color porcelain samples were used. The environmental conditions were standardized, and no time limit was set for answering in the computer application., Results: Fourteen gingival color samples (66.6%) were not useful for representing the studied gingival shades. Not all natural gingival colors studied were represented within the 50.50% acceptability limits of the pink samples. There were no statistically significant differences between men and women in terms of "hit" percentages. The highest correlation coefficient (in absolute value) was for the L* coordinate (the darker the gingiva in the picture, the higher the hit rate for choosing the "ideal" shade tab); however, none of the linear correlation coefficients were statistically significant., Conclusions: Not all colors provided in the pink ceramic system were useful for subjective gingival selection. There were no statistically significant differences between male and female dental students in gingival color perception. The L* coordinate was the only one that influenced the correct perception of gingival color by dental students, and it did so more in women than in men.

Background: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes., Materials and Methods: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC)., Results: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement., Conclusion: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT., Trial Registration: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1)., (© 2024. The Author(s).)

Purpose: To measure the gingival phenotype-related features, gingival thickness (GT) and gingival width (GW), in healthy children and to investigate their association between them, with age, gender, tooth-type and arch., Methods: The gingival sites of 1029 teeth were included from 64 children (36 males and 28 females), with primary and mixed dentition, attending the paediatric dental clinic of Aristotle University, Thessaloniki. GT and GW were measured ultrasonically and with a periodontal probe, respectively. Mixed effects linear regression models were used to evaluate the association of gingival thickness and gingival width with the under-investigation parameters. Spearman's correlation coefficient was used to evaluate correlation between GT and GW., Results: Significantly thicker gingiva is found in posterior teeth compared to anterior teeth, in permanent teeth versus primary teeth and in maxillary teeth in comparison to mandibular teeth (p value < 0.001). Regarding GW, significantly wider gingiva is noted in posterior regions (p value = 0.022) and the maxilla (p value < 0.001). Gender-wise and concerning age GT and GW are not significantly affected. A weak and positive correlation between GT and GW is noted (rho 0.30, p < 0.001)., Conclusions: GT and GW present significant associations with arch and tooth-type. Findings from this study fulfil the further understanding of GT and GW of paediatric patients that are investigated sparsely throughout the literature and demonstrate an accurate, painless and simple method to map the gingiva., (© 2024. The Author(s), under exclusive licence to European Academy of Paediatric Dentistry.)

Background: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning., Methods: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05., Results: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC., Conclusion: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated., Trial Registration: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24)., (© 2024. The Author(s).)

Background: To evaluate and compare efficacy of pinhole surgical technique (PST) alone and with advanced platelet rich fibrin (A-PRF) in the management of bilateral multiple adjacent gingival recession defects (MAGRD)., Methods: One hundred and sixty five MAGRD were randomly assigned to control group (treated with PST) and test group (PST with A-PRF). Clinical parameters of gingival recession depth (GRD), gingival recession width (GRW), width of keratinised gingiva (WKG), complete root coverage (CRC) and gingival thickness (GT) on ST-CBCT was measured at 2, 4 and 6 mm apically from the gingival margin. Also, root coverage aesthetic score and patient satisfaction ratings were recorded at baseline, 6 and 12 months postoperatively., Results: Substantial reduction in GRD (Test: 1.29 ± 0.69 mm and Control 0.98 ± 0.30 mm) (p < 0.001) and GRW (Test: 2.03 ± 0.90 mm and control 1.73 ± 0.99 mm) (p < 0.05) with associated gain in WKG and GT was observed (p < 0.001). Mean GT values were increased in both the groups at 2, 4 and 6 mm from the crest. Comparison of Test and Control groups yielded significant reductions in GRD (-0.17 ± 0.56 mm) and WKG (0.73 ± 1.07 mm) favoring the Test group (p < 0.05). Similar increase in GT was observed with better results in Test than control group. (p < 0.001)., Conclusion: Both groups exhibited sound clinical outcomes with test group offering better resolution of MAGRD in comparison to control group. Also, it enhances clinical and therapeutic end results in terms of attaining reduction in GRD and GRW along with greater gain in KTW and GT., Clinical Significance: PST as a minimally invasive approach has numerous benefits, some of which include the absence of scarring and improved aesthetics linked to faster wound healing. The addition of A-PRF enhances the intended therapy outcomes, which is beneficial for both patients and professionals in the field of periodontics., (© 2023 Wiley Periodicals LLC.)

Objectives: To investigate the biomechanical properties of porcine oral tissues with in vivo ultrasonography and to compare the difference between oral alveolar mucosa and gingival tissue concerning compressional and tensile mechanical strain., Materials and Methods: Sinclair minipigs (6 females and 4 males, 6 to 18 months of age) were anesthetized for ultrasonography. In vivo high-frequency tissue harmonic ultrasound (12/24 MHz) cine-loops were obtained while inducing mechanical tissue stress (0 to 1 N). Post-processing strain analysis was performed in a cardiac speckle tracking software (EchoInsight®). Region of interest (ROI) was placed for gingival and alveolar mucosa tissues for longitudinal (compressional) and tensile strain analyses. A calibrated gel pad was employed to determine the absolute force (pressure) for the measured tissue strain response function. The resulting elasticity data was statistically analyzed using custom Matlab scripts., Results: In total, 38 sonography cine-loops around the third premolars were included in the investigation. The longitudinal strain of alveolar mucosa ε AM L was found to be significantly (P < .05) larger than that of gingiva ε G L . Across the measured force range, ε AM L  ~ 1.7 ×  ε G L . Significant differences between alveolar mucosa and gingiva tissues were found for all forces. The tensile strain of the alveolar mucosa ε AM T was found to be ~2 ×  ε G T (on the epithelial surface of the gingiva). Both were statistically significantly different for forces exceeding ~0.08 N. At depth, that is, 500 and 1000 μm below the epithelial surface, the gingiva was found to have less ability to stretch contrary to the alveolar mucosa. Gingival tissue at 500 μm depth has significantly less tensile strain than at its surface and more than at 1000 μm depth. In contrast, the tensile strain of alveolar mucosa is largely independent of depth., Conclusion: Ultrasonography can reveal significant differences in oral alveolar mucosal and gingival elastic properties, such as compressional and tensile strain. Under minute forces equivalent to 10 to 40 g, these differences can be observed. As dental ultrasound is a chairside, and noninvasive modality, obtaining real-time images might soon find clinical utility as a new diagnostic tool for the objective and quantitative assessment of periodontal and peri-implant soft tissues in clinical and research realms. As ultrasound is a safe modality with no known bioeffects, longitudinal monitoring of areas of concern would be particularly attractive., (© 2023 American Institute of Ultrasound in Medicine.)

The objective of this study was to systematically review the literature regarding diagnostic applications of ultrasound imaging for evaluation of the periodontium in humans. The search was conducted on Medline, EMBASE, Web of Science, Scopus, Cochrane, and PubMed up to April 3, 2023. The studies included were exclusively human studies that assessed the periodontium with ultrasound (US) imaging (b-mode). Outcomes measured included alveolar bone level, alveolar bone thickness, gingival thickness, and blood flow quantification. References were imported to Covidence. Two reviewers conducted phases 1 and 2. The JBI risk assessment tool for cross-sectional studies was used. Extracted data included the transducer and measurements used and the study's outcomes. The search yielded 4892 studies after removing duplicates. From these, 25 studies were included and selected for extraction. Included studies retrieved outcomes from US examinations of the periodontal tissues. From the selected studies, 15 used US on natural teeth, 4 used US on implants, 2 used US on edentulous ridges, and 4 used color flow/power in US to evaluate the blood flow. The results of the present systematic review suggest that US might be a feasible and valuable diagnostic tool for the periodontium, with the potential to complement shortfalls of current radiographic technologies., (© 2023 The Authors. Journal of Periodontal Research published by John Wiley & Sons Ltd.)

Objective: The aim of the study is comparative analysis of the condition of oral organs and tissues in people with metabolic syndrome (MS) of varying severity before orthopedic dental rehabilitation based on dental implants., Material and Methods: 255 patients (151 women and 104 men) aged from 35 to 65 years were examined. 3 groups were formed: 2 study groups and a comparison group. Groups 1 and 2 included individuals with excess body weight and MS. The control group consisted of 88 people without MS. An index assessment of the condition of the periodontium and tissue structures of the alveolar bone (according to cone-beam computed tomography), microcirculation in the gingival mucosa was carried out using laser Doppler flowmetry., Results: The analysis of the periodontal condition indicators showed that in all groups of patients with MS, periodontal pathology occurred, the value of which was significantly higher than in patients of the control group ( p <0.05). The analysis of bone tissue according to CBCT data showed that the most favorable conditions (type 1 and type 2 of bone according to Misch) for dental implantation are found in people without MS, respectively 3.5% and 35.1% of cases. The intensity of blood flow (σ) was 21.2% lower in group 1 and 48% in group 2, compared with the control group. Vasomotor activity (Kv) was 13.2% lower in the first group and 35% lower in the second group. A decrease in amplitudes in the area of all rhythms in the LDF gram was found: low-frequency - by 15.6%, high-frequency - by 16.9%, pulse - by 3.6%., Conclusion: Changes occurring in the organs and tissues of the mouth against the background of MS of varying severity lead to a decrease in tissue perfusion with blood and blood flow activity, a local decrease in bone density, and as a result, pathological changes in periodontal tissues. Before performing dental rehabilitation, it is necessary to take into account all the risks of possible complications caused by the general condition of organs and systems of people with MS.

The present study aimed to use CBCT to compare the influence of White and Black ethnicity on gingival and bone thickness. A total of 84 individuals of both genders, aged between 18 and 59 years old, were divided into Black (BG; n &#61; 42) and White (WG; n &#61; 42) groups and were analyzed from June 2020 to April 2021. The gingival thickness (GT) and buccal bone plate thickness (BBPT) were measured using CBCT in all maxillary anterior teeth. Mann-Whitney, t test, chi-square, Pearson correlation, and Spearman correlation were used for comparisons and correlations with a 5% signif- icance level. Black individuals had mean GT (1.45 ± 0.29 mm) and BBPT (1.07 ± 0.21 mm) significant- ly thicker (gingival: P < .0001; bone: P &#61; .0002) than White individuals (1.17 ± 0.28 mm and 0.91 ±0.17 mm, respectively). The variables presented greater values for men. A positive correlation be- tween the BBPT and GT was found in two teeth in the WG (left and right central incisors) and one tooth in the BG (left canine). Moreover, a correlation between BBPT and GT immediately below the alveolar bone crest (0 mm) was found in four teeth in the WG (left and right lateral and central incisors) and the BG (left and right canine, left lateral and central incisors). Black race was shown to significantly influence the GT and BBPT, with Black patients presenting thicker structures than White patients.

Objective: This diagnostic accuracy study aims to present the first measurements of gingiva thickness around lower anterior teeth using dental magnetic resonance imaging (MRI) and to compare these measurements with two established methods: (1) gingival phenotype assessment via periodontal probing, and (2) the superimposition of cone-beam computed tomography (CBCT) scans with intraoral scans of teeth and gums., Materials and Methods: Ten patients with substantial orthodontic treatment need and anterior mandibular crowding were consecutively included in this clinical case series. After periodontal probing, each patient underwent a CBCT scan, an intraoral scan of the mandible, and an MRI investigation using a novel mandibula 15-channel dental coil., Results: The mean gingiva thickness was 0.72 mm measured on MRI and 0.97 mm measured on CBCT, with a mean difference between the measurement methods of 0.17 ± 0.27 mm (p < 0.001). Measurement agreement between the index tests (MRI and CBCT) and the clinical reference standard (probing) yielded an overall percent agreement of 64.94% and 47.02% for MRI and CBCT, respectively. Teeth with thin phenotypes were associated with lower soft tissue dimensions in both free (MRI: 0.56 mm vs. CBCT: 0.79 mm) and supracrestal gingiva (MRI: 0.75 mm vs. CBCT: 1.03 mm) when compared to those with thick phenotypes. However, only the measurements obtained from MRI scans showed statistically significant differences between the two phenotypes., Conclusion: Dental MRI successfully visualizes delicate structures like the gingiva in the anterior mandible and achieves a high correlation with superimposed CBCT scans, with clinically acceptable deviations., Clinical Relevance: The present study helps to establish dental MRI as a radiation-free alternative to conventional radiographic methods., (© 2023. The Author(s).)

Objectives: To evaluate gingival phenotype (GP) and thickness (GT) using visual, probing, and ultrasound (US) methods and to assess the accuracy and consistency of clinicians to visually identify GP., Materials and Methods: The GP and GT of maxillary and mandibular anterior teeth in 29 orthodontic patients (mean age 25 ± 7.5 years) were assessed using probing and US by a single examiner. General dentist and dental specialist assessors (n = 104) were shown intraoral photographs of the patients, including six repeated images, and asked to identify the GP via a questionnaire., Results: An increasing trend in GT values of thin, medium, and thick biotype probe categories was found, though this was not statistically significant (P = .188). Comparison of probing method to determinations of GT made by US yielded slight agreement (κ = 0.12). Using the visual method, assessors' identification of the second GP determination ranged from poor to moderate agreement (κ = 0.29 to κ = 0.53)., Conclusions: The probe method is sufficient in differentiating between different categories of GP. However, further research is required to assess the sensitivity of the probe method in recognizing phenotypes in the most marginal of cases. Assessors using the visual method lack the ability to identify GP accurately and consistently among themselves., (© 2023 by The EH Angle Education and Research Foundation, Inc.)

Objective: To investigate soft-and hard-tissue changes after simultaneously labial and lingual augmented corticotomy in patients with insufficient alveolar bone thickness of lower anterior teeth both in labial and lingual side during orthodontic treatment. Methods: From January 2021 to June 2022, 10 patients [2 males and 8 females, (26.2±3.1) years old] who received orthodontic and orthognathic combined treatment from the Fourth Clinical Division, Peking University School and Hospital of Stomatology were selected. The alveolar bone thickness of lower anterior teeth both in labial and lingual side in these patients was less than 0.5 mm according to cone-beam CT examination before or during treatment, and 60 lower anterior teeth were included. The 10 patients were treated with simultaneously labial and lingual augmented corticotomy. The differences in gingival recession, papilla index and the differences in labial and lingual alveolar bone thickness of lower anterior teeth were compared. Results: Six months after surgery, the alveolar bone thicknesses at the 4 mm under cemento-enamel junction (CEJ), 8 mm under CEJ and at the apical level [labial side: (1.02±0.39), (2.22±0.89) and (4.87±1.35) mm; lingual side: (1.07±0.46), (2.31±1.04) and (3.91±1.29) mm] were significantly higher than that before surgery [labial side: (0.02±0.09), (0.06±0.21) and (2.71±1.33) mm]; lingual side: (0.14±0.29), (0.40±0.52) and (2.13±1.02) mm] ( P< 0.001), respectively. The increases in alveolar bone thickness of central incisors [apical level on labial side: (2.53±1.20) mm, 8 mm under CEJ on lingual side: (2.27±1.24) mm, apical level on lingual side: (2.66±1.49) mm] and lateral incisors [apical level on labial side: (2.42±1.30) mm, 8 mm under CEJ on lingual side: (2.28±0.92) mm, apical level on lingual side: (1.94±1.15) mm] were significantly higher than that of canines [apical level on labial side: (1.52±1.47) mm, 8 mm under CEJ on lingual side: (1.17±1.09) mm,apical level on lingual side: (0.74±1.37) mm] ( P< 0.01). There were no significant differences in the degree of gingival recession [labial side before surgery: (0.72±0.88) mm, lingual side before surgery: (0.80±1.09) mm; labial side 6 months after surgery: (0.72±0.81) mm,lingual side 6 months after surgery: (0.89±0.21) mm] and gingival papilla index [before surgery: 1.00(0.75, 2.00); 6 months after surgery: 1.00(1.00, 2.00) ] between pre-operation and 6 months after surgery ( P> 0.05). No serious complications occurred. Conclusions: The method used in this article for simultaneously labial and lingual augmented corticotomy was safe and feasible. This surgery has positive clinical significance for the stability of the periodontal tissue in orthodontic treatment for patients with alveolar bone thickness less than 0.5 mm of lower anterior teeth both in labial and lingual side.

The study evaluated the position of gingival margins in anterior teeth using clinical and 3-dimensional (3D) optical scanning method among patients subjected to non surgical periodontal treatment (NSPT). A single arm, longitudinal study was undertaken at the Archway Dental Center, University of Manchester, UK. History and clinical examination were done. Gingival recession, attachment loss (AL), and periodontal probing depth (PD) were recorded at baseline and 12-weeks follow-up. NSPT was done using hand and ultrasonic instruments. Impressions were made, the resultant gypsum models were scanned to generate 3D images. The change in the gingival level and thickness of facial gingiva were assessed. Out of eight patientsrecruited, three were lost to follow up. The 3D scan showed a poor correlation with the clinical assessment of gingival recession in anterior teeth following NSPT (r=- 0.0089). Recession did not improve after NSPT (p= 0.20).

Objectives: To investigate the association between the width of keratinized gingiva (WKG), gingival phenotype (GP), and gingival thickness (GT) with craniofacial morphology in sagittal and vertical dimensions., Materials and Methods: WKG, GP, and GT of mandibular anterior teeth in 177 preorthodontic patients (mean age 18.38 ± 5.16 years) were assessed clinically using a periodontal probe, a Colorvue Biotype Probe, and ultrasound by a single examiner. Patients were grouped into skeletal Class I, II, and III and hyperdivergent, normodivergent, and hypodivergent based on ANB and SN-MP angles. Mandibular incisor inclination (L1-NB) was also measured. Clinical and cephalometric measurements were repeated to assess inter- and intraexaminer reproducibility., Results: A significant association was found between thin GP and skeletal Classes I and III for the left mandibular central incisor (MCI; P = .0183). In skeletal Class III patients, L1-NB angle demonstrated a decreasing trend as phenotype thickness decreased. A significant association was found between thin phenotype and normodivergent and hypodivergent groups for MCIs (left: P = .0009, right: P = .00253). No significant association between WKG or GT and craniofacial morphology was found., Conclusions: Thin GP is associated with skeletal Class I and III for the left MCI. Thin GP is associated with hypodivergent and normodivergent skeletal patterns for the MCIs. There was no association between WKG and GT and craniofacial morphology in both skeletal and vertical dimensions. Dental compensations that exist due to different craniofacial morphology may influence the GP., (© 2023 by the EH Angle Education and Research Foundation, Inc.)

Background: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth., Materials and Methods: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height)., Results: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT., Conclusions: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype., (© 2023 American Academy of Periodontology.)

Objectives: To investigate the diagnostic value of probe transparency related to gingival thickness (GT) and keratinized gingival width (KGW) at individual and site levels and explore the relationship of buccal bone plate thickness (BT) with GT and KGW., Materials and Methods: A total of 1,606 teeth from 167 patients with periodontally healthy maxillary anterior region were included. GT was measured with probe transparency and transgingival probing. KGW was measured directly. BTs were assessed at the level 1 mm apical to the alveolar crest (BT1) and midpoint of the root (BT2) and evaluated at individual and tooth levels along with their mutual associations., Results: The prevalence of thick gingiva was 53% with probe transparency measurement and 51% with transgingival probing. The cutoff gingival thickness was 0.8 mm, which correlated moderately with a Cohen's kappa of 0.386. The mean GT, KGW, and BTs (BT1 and BT2) in the maxillary anterior region were 0.97 ± 0.46, 5.51 ± 1.62, 0.85 ± 0.31, and 0.79 ± 0.32 mm, respectively. GT and KGW correlated mildly (r = 0.261), and GT and BTs correlated moderately (BT1: r = 0.298; BT2: r = 0.338). GT and BTs differed significantly between men and women and among different tooth sites., Conclusions: GT and BTs correlated positively in the maxillary anterior region and varied within and among individuals. Sex was a factor influencing the gingival phenotype and bone morphotype., Clinical Relevance: GT measured with transgingival probing, with a cutoff of 0.8 mm, could serve as an objective measure to distinguish different gingival phenotypes., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Gingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and time-consuming procedure. This study aims to evaluate the feasibility and accuracy of an alternatively novel, non-invasive technology based on the precise 3-dimension (3D) soft tissue reconstruction from intraoral scanning and cone beam computed tomography (CBCT) to predict the gingival biotype., Methods: As a proof-of-concept, Yorkshire pig mandibles were scanned, and the CBCT data were fed into a deep-learning model to reconstruct the teeth and surrounding bone structure in 3D. By overlaying the CBCT scan with the intraoral scans, an accurate superposition was created and used for virtual measurements of the soft tissue thickness. Meanwhile, gingival thicknesses were also measured by a periodontal probe and digital caliper on the buccal and lingual sides at 3 mm apical to the gingival margin of the posterior teeth and compared with the virtual assessment at the same location. The data obtained from virtual and clinical measurements were compared by Wilcoxon matched-pairs signed-rank analysis, while their correlation was determined by Pearson's r value. The Mann-Whitney U test was used for intergroup comparisons of the amount of difference., Results: Among 108 investigated locations, the clinical and virtual measurements are strongly positively correlated (r = 0.9656, P < 0.0001), and only clinically insignificant differences (0.066 ± 0.223 mm) were observed between the two assessments. There is no difference in the agreement between the virtual and clinical measurements on sexually matured samples (0.087 ± 0.240 mm) and pre-pubertal samples (0.033 ± 0.195 mm). Noticeably, there is a greater agreement between the virtual and clinical measurements at the buccal sites (0.019 ± 0.233 mm) than at the lingual sites (0.116 ± 0.215 mm)., Conclusion: In summary, the artificial intelligence-based virtual measurement proposed in this work provides an innovative technique potentially for accurately measuring soft tissue thickness using clinical routine 3D imaging systems, which will aid clinicians in generating a more comprehensive diagnosis with less invasive procedures and, in turn, optimize the treatment plans with more predictable outcomes., (© 2023. The Author(s).)

The aim of the present study was to develop a 3D digital image-analysis method to quantitatively assess gingival changes after clear-aligner orthodontic therapy. Using teeth as fixed reference points, 3D image analysis tools have been used to quantify mucosal level changes after specific therapies. This technology has not been applied to orthodontic therapy, primarily because orthodontic tooth movement precludes using teeth as fixed reference points. Rather than superimposing the pre- and posttherapy volumes for the entire dentition, the methodology presented herein superimposed the pre- and post-therapy volumes for individual teeth. The lingual tooth surfaces, which remained unaltered, were used as fixed references. Intraoral scans taken before and after clear-aligner orthodontic therapy were imported for comparison. Volumes were created for each 3D image and were superimposed in a 3D image-analysis software that allowed quantitative measurements. The results demonstrated this technique's ability to measure very small changes in the apicocoronal position of the gingival zenith, as well as alterations of gingival margin thickness, following clear-aligner orthodontic therapy. The present 3D image-analysis method offers a useful tool for investigating the periodontal dimensional and positional changes that accompany orthodontic therapy.

Objective: To assess the accuracy of cone-beam computed tomography (CBCT) for determining gingival thickness., Material and Methods: Searches were undertaken in PubMed/MEDLINE, EMBASE, LILACS, Web of Science, Scopus, LIVIVO, and gray literature (Google Scholar and ProQuest) for studies considered eligible according to the following criteria: cross-sectional observational studies, which compared CBCT accuracy with that of transgingival probing when determining gingival thickness, in adult patients with good periodontal health. No language or time restrictions were applied in this systematic review. The risk of bias was assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist for analytical cross-sectional studies., Results: Six articles were included for qualitative synthesis, involving a pooled sample of 132 patients with a mean age of 29 years (18-51 years). Of these 6 studies, 5 were eligible for quantitative analysis. The meta-analysis showed no statistically significant difference between CBCT and transgingival probing measures of gingival tissue (mean difference of 0.10 (95% CI-0.17-0.38). No significant level of heterogeneity was detected (Tau 2 -P = 0.0662; I 2 = 0%; H 2 -P = 1.000; Q-P = 1.134). According to the GRADE criterion, confidence in the cumulative evidence was considered low., Conclusions: CBCT is an accurate method for determining gingival tissue thickness, comparable to the reference standard (transgingival probing)., Clinical Relevance: CBCT could be considered for gingival thickness measurement when bone thickness is also needed, and thereby aid in the assessment of gingival biotype without the discomfort and anesthesia needed in transgingival probing., Trial Registration: This protocol was registered at the PROSPERO database (International Prospective Register of Systematic Review) under registration number CRD42022326970. Available from: https://www.crd.york.ac.uk/prospero/display&#95;record.php?ID=CRD42022326970 ., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Autogenous soft tissue grafting is indicated in thin gingival biotypes before orthodontic proclination or labial movements to increase the keratinized gingiva and prevent gingival recession. However, its effect on local alveolar bone remodeling is unclear. The aim of this study was to investigate the effects of autogenous soft tissue grafting on local alveolar bone after orthodontic proclination or labial movements., Methods: Sixteen patients with a thin scalloped gingival biotype, narrow keratinized gingiva, or thin cortical bone requiring orthodontic proclination or labial movement of teeth were included. Cone-beam computed tomography (CBCT) images were obtained before grafting and at least 6 months after surgery. Sixty mandibular teeth were included, and the vertical bone level and horizontal labial bone thickness were measured. The results were compared using paired t-tests or Wilcoxon signed-rank test., Results: The horizontal labial bone thickness increased, especially at 6 mm below the cementoenamel junction (CEJ) in the mandibular central and lateral incisors (P < 0.05). The total alveolar bone area of the canines, first premolars, and second premolars increased at 3, 6, and 9 mm below the CEJ, respectively, and the differences were statistically significant (P < 0.05). Additionally, vertical bone height increased minimally on the labial side, but the differences were not statistically significant (P > 0.05)., Conclusions: New bone regeneration was observed on the labial (pressure) side after autogenous soft tissue grafting, which may represent a mechanism to effectively prevent gingival recession and maintain periodontal health., Irb Approval: All the experimental procedures involving humans in this study were approved by the Medical Ethics Committee of Xiangya Stomatological Hospital, Central South University ( No. 20190048)., (© 2023. The Author(s).)

Purpose: To measure and investigate the relationship of three-dimensional gingival morphology on the labial side of the maxillary anterior teeth by using cone-beam CT(CBCT) in conjunction with a novel radiocontrast agent., Methods: Thirty periodontal healthy subjects were enrolled. The composition of light-cured gingival barrier resin and iohexol injection was applied to the measurement area, then a positioning wire was set up, and CBCT was used to assess supracrestal gingiva tissue (SGT), gingiva thickness (GT) and width of keratinized gingiva (KGW). The differences in each parameter between different gingival biotypes were compared. SPSS 25.0 software package was used for data analysis., Results: The mean distance of SGT was greater for central incisors than canines (P＜0.05). The central incisors had the thickest GT in the maxillary anterior region, while the canines had the thinnest(P＜0.01). The GT of male central and lateral incisors was significantly thicker than that of females(P＜0.05), and the KGW was significantly wider than that of canines (P＜0.05). GT-SGT, KGW-SGT and GT-KGW all had a positive correlation (r=0.315, 0.287,0.406, P＜0.01). The thick gingival type was greater than the thin gingival type in the KGW of lateral incisors and canines and the SGT height of canines (P＜0.05)., Conclusions: There were significant differences in the measuring results of GT, KGW, and SGT in the maxillary anterior region under different gingival biotypes, and individualized treatment strategies can be formulated based on gingival biotypes.

The aim of this study was to investigate the gingival thickness and biologic width in the aesthetic zone (maxillary central and lateral incisors) in an Asian population using cone beam computed tomography (CBCT) as a non-invasive measurement method, prior to immediate implant placement. The gingival geometric ratio is introduced as a new parameter for assessing soft tissue stability and hence predicting the aesthetic outcome. The gingival thickness, biologic width category (normal, high, and low crest), and gingival geometric ratio (shape and configuration of the gingival tissues) were assessed for 171 central and 175 lateral incisors on high-resolution CBCT images. Thick gingivae were found in 93.6% of the central incisors and 64% of the lateral incisors (P < 0.001). The difference in thickness between the central and lateral incisors was statistically significant (P < 0.001). Regarding the biologic width of the facial gingival tissue, the majority of central (64.8%) and lateral (64.3%) incisors were categorized as low crest (>3 mm). The study found that most of the gingivae of the maxillary central incisors were thick, while thin gingivae were more prevalent in the lateral incisors. Therefore, an individual patient may have different gingival thickness types, and 'one individual, one gingival biotype' may not be true. Furthermore, the majority of the facial gingival tissues of the maxillary incisors were found to be low crest., (Copyright © 2022 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

The aim of this prospective study was to evaluate the efficacy of a cross-linked xenogeneic volume-stable collagen matrix (CCM) in treating gingival recessions (GRs) at teeth presenting with cervical restorations or noncarious cervical lesions (NCCLs). Fifteen patients with esthetic concerns for multiple sites with GRs and cervical restorations were consecutively enrolled. The sites were treated with a coronally advanced flap (CAF) design in combination with a CCM. When present, the previous restoration was removed, and the cementoenamel junction was reconstructed with a composite material. The CCM was stabilized on the root surface(s) previously occupied by the restoration. The CAF was sutured to completely cover the graft. Clinical measurements and intraoral digital and ultrasonographic scans were collected at baseline and at 3 and 6 months postsurgery. Limited postoperative discomfort was reported by patients during the healing. The mean root coverage at 6 months was 74.81%. Average increases in gingival thickness of 0.43 mm and 0.52 mm were observed when measured with ultrasonography 1.5 mm and 3 mm apical to the gingival margin, respectively (P < .05). Relatively high patient-reported satisfaction and esthetics were associated with the treatment outcomes. The treatment resulted in a significant reduction in dental hypersensitivity (mean: 33 VAS points). The present study demonstrated that CAF + CCM is an effective approach for treating GRs at sites with cervical restorations or NCCLs. Int J Periodontics Restorative Dent 2023;43:147-154. doi: 10.11607/prd.6448.

Background: This cross-sectional study assessed the role of gingival landmarks (GLs) and cutting points (CPs) for gingival phenotype (GP) determination., Methods: Six maxillary anterior teeth (70 subjects) were evaluated using soft tissue cone-beam computed tomography (ST-CBCT). Gingival thickness was measured at different GLs: 1) tissue zone (gingival margin [GM], 1 and 2 mm apical to GM, cemento-enamel junction, above the bone crest); 2) bone zone (buccal bone crest [BBC], 1, 2, and 3 mm apical to BBC). CPs of 0.6, 0.8, 1.0, 1.2, and 1.5 mm were used to discriminate between thin and thick GP. The clinical determination of GP was made based on transparency of the periodontal probe (TRAN)., Results: The prevalence of thin and thick GP depended on the GL and CP. Considering the CP (1 mm), thin GP at the tissue zone ranged from 99% at the GM to 10.2% above the bone crest. In the bone zone, thick GP ranged from 28% at the BBC to 6% at 3 mm apical to the BBC. The predictability of a correct assessment of GP by TRAN compared with ST-CBCT was influenced by the GLs and CPs. A slight agreement (kappa <0.2) and low accuracy (area under the curve <0.7) were found between methods., Conclusions: The determination of thin and thick GPs is related to the gingival landmarks and CPs. Further studies are required for a well-defined treatment protocol considering different gingival landmarks in tissue and bone zones. An ST-CBCT may be useful for this purpose., (© 2022 American Academy of Periodontology.)

Background: Our objective was to develop and test a combined Raman microspectroscopy (RMS) and micro-optical coherence tomography (μOCT) approach for chairside quantification of gingival collagen, DNA, epithelium, and connective tissue. We hypothesized that a high-resolution RMS/μOCT can characterize healthy and inflamed periodontal tissues for diagnosis and disease activity monitoring., Methods: A prototype instrument was developed, tested ex vivo on gingival specimens and optimized for in vivo intraoral use. The primary outcome measures were the ratios of oral epithelium to connective tissue thickness (OE:CT) and the amount of DNA to collagen type I (DNA/Col 1), and the thickness of sulcular epithelium (SE). For ex vivo testing, eight subjects with healthy periodontal tissues or with Stage II to IV periodontitis were included in the study and underwent crown-lengthening or periodontal surgical procedures, respectively. Gingival biopsies were scanned by RMS/μOCT and histometric analyses were performed. The proof-of-concept study included OE/CT, DNA/Col 1, and SE assessed in six volunteers with or without signs of gingival inflammation (n = 3/group)., Results: The spatially co-registered RMS spectra revealed opposing changes in the collagen and DNA peaks of inflamed compared with healthy tissues (P <0.05). Combined RMS/μOCT analysis showed that OE/CT, DNA/Col, and SE are significantly different between healthy and inflamed sites (P <0.05). Histological assessments confirmed the differences detected by RMS/μOCT. Qualitative analysis of DNA/Col 1 ratios indicated Col I content as the main distinguishing feature for health and DNA content for periodontitis., Conclusion: Results suggest that combined RMS/μOCT chairside imaging may distinguish between healthy and diseased sites by evaluating marginal periodontal morphological and biochemical features., (© 2022 American Academy of Periodontology.)

Objectives: To quantitatively assess periodontal soft tissue changes, including gingival thickness and keratinized gingiva width after periodontally accelerated osteogenic orthodontics (PAOO) surgery by digital measurements.  METHODS: This study enrolled 15 maxillaries with 89 anterior teeth and 16 mandibles with 94 anterior teeth from Chinese adult patients with skeletal Angle Class III malocclusion for whom PAOO surgery was proposed during orthodontic treatment. Intraoral scanning and cone beam computed tomography (CBCT) examinations were performed before PAOO surgery and 6 months after the surgery. Keratinized gingiva width was measured on the digital model acquired by intraoral scanning. The gingival thickness was measured using a digital three-dimensional (3D) model based on the combination of digital intraoral scanning and CBCT data., Results: The mean gingival thickness before surgery was 0.91 ± 0.32 mm and 1.21 ± 0.38 mm at 6-month after PAOO. Patients showed periodontal soft tissue increase with a mean gingival tissue gain of 0.30 ± 0.33 mm. At 1 mm, 2 and 3 mm apical to cemento-enamel junction (CEJ) levels, the gingival thickness increase of the mandible was higher than that of the maxilla (0.38 ± 0.30 mm vs. 0.24 ± 0.31 mm, 0.43 ± 0.35 mm vs. 0.26 ± 0.41 mm, 0.36 ± 0.27 vs. 0.25 ± 0.32 mm, respectively, all P < 0.05). Moreover, the sites of gingival thickness ≤ 1 mm before surgery showed more tissue gain than the sites > 1 mm (0.36 ± 0.32 mm vs. 0.18 ± 0.31 mm, P < 0.001). The mean keratinized gingiva width at T0 was 3.88 ± 1.22 mm, and increased 1.05 ± 1.24 mm 6 months after PAOO surgery. Moreover, a digital 3D model for gingival thickness measurement based on the combination of digital intraoral scanning and CBCT displayed high reliability and accuracy with an intra-class correlation coefficient (ICC) of 0.897., Conclusion: PAOO could improve an insufficient quantity of periodontal soft and hard tissues in patients with skeletal Angle Class III malocclusion, including the gingival thickness and keratinized gingiva width. A digital 3D model based on the combination of digital intraoral scanning and CBCT data could provide a new digital measurement of gingival thickness with high accuracy and reliability., (© 2022. The Author(s).)

Objectives: Gingival phenotype is closely related to treatment success and aesthetic results in the maxillary anterior region. Several methods were proposed to measure the dimensions of the gingival tissue. This study aimed to evaluate the gingival thickness using clinical and radiographic techniques and to explore the association between gingival thickness and gingival phenotypes classified by color-coded phenotype probes., Materials and Methods: The gingival thickness of 86 periodontally healthy maxillary anterior teeth was assessed using transgingival probing (TGP) and cone-beam computed tomography (CBCT). The gingival phenotype was classified as thin, medium, thick, or very thick by transparency of the color-coded probes through the gingival sulcus. The labial alveolar bone thickness was measured on CBCT images. The keratinized tissue width (KTW) was recorded., Results: Good to excellent agreement was found between TGP and CBCT regarding the thickness of the gingiva (p<0.001). There was a very high correlation between the phenotypes determined by color-coded probes and the gingival thickness measured by TGP (r=0.953, p<0.001). KTW was significantly higher in thick and very thick phenotype groups compared with thin phenotype group., Conclusion: Cone-beam computed tomography images and the probe transparency method with color-coded probes are reliable for identifying the gingival phenotype in the maxillary anterior region, based on comparisons to direct transgingival probing., Clinical Relevance: The assessment of the gingival phenotype is essential, especially in the aesthetic zone, to obtain predictable and favorable clinical outcomes in various dental procedures. The newly introduced color-coded probes comprise a non-invasive and reliable method for this., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: The present study aimed to investigate the relationship between tooth inclination and gingival and bone dimensions in maxillary anterior teeth., Methods: This cross-sectional study included cone-beam computed tomography (CBCT) images of 160 maxillary anterior teeth (30 individuals). Tooth inclination, gingival and bone thickness, and distances from cementoenamel junction to alveolar bone crest and gingival margin were measured in the labial surface. The correlations were analyzed using Pearson and partial correlation tests (p≤0.05)., Results: In the central incisors, tooth inclination was positively and significantly related to apical bone thickness (R = 0.34, p= 0.001). In the canines, tooth inclination was negatively and significantly related to cervical bone thickness (R = - 0.34, p= 0.01) and positively associated to apical bone thickness (R = 0.36, p= 0.01) and to gingival margin-cementoenamel junction distance (R = 0.31, p= 0.03). In the lateral incisors, tooth inclination was not associated with gingival or bone dimensions., Conclusions: In the central incisors, the greater the labial tooth inclination, the greater is the apical bone thickness. In the canines, the greater the labial tooth inclination, the smallest is the cervical bone thickness, the greater is the apical bone thickness, and the greater is the gingival margin. Gingival and bone dimensions should be assessed when planning orthodontic treatment involving buccal movement of central incisors and canines.

Background and Objective : Gingival biotype can be assessed using a variety of invasive and non-invasive procedures, such as direct probing, transgingival probing, ultrasound-guided approaches, and, for the more sophisticated, cone-beam computed tomography. The aim of this study was to evaluate gingival biotype in relation to transgingival probing and cone-beam computed tomography (CBCT). Materials and Methods : This study included a total of two hundred healthy individuals. Gingival thickness was assessed and measured from the right and left maxillary central incisor teeth using CBCT and transgingival probing of the attached gingiva. The measurements were analyzed with regard to tooth type (central incisor). Linear measurements for gingival biotype were measured using both methods. Correlations and differences between measurement methods were assessed. Results : The mean age of study participants was 32.49 ± 8.61 years. The radiographic measurements on CBCT were 1.34 ± 0.17 mm for the right central and 1.28 ± 0.21mm for the left central. The transgingival probing measurements were 1.31 ± 0.18 for the right central and 1.22 ± 0.21mm for the left central. Conclusion : As per the results of this study, there is a significant positive correlation between transgingival probing and CBCT measurements of gingival biotypes.

Statement of Problem: The use of computer-aided design and computer-aided manufacturing (CAD-CAM) technologies is widely established, with single restorations or short fixed partial dentures having similar accuracy when generated from digital scans or conventional impressions. However, research on complete-arch scanning of edentulous jaws is sparse., Purpose: The purpose of this pilot in vitro study was to compare the accuracy of a digital scan with the conventional method in a workflow generating implant-supported complete-arch prostheses and to establish whether interference from flexible soft tissue segments affects accuracy., Material and Methods: An edentulous maxillary master cast containing 6 angled implant analogs was used and digitized with mounted scan bodies by using a high-precision laboratory scanner. The master cast was then scanned 10 times with 4 different intraoral scanners: TRIOS 3 with a complete-arch scanning strategy (TRI1) or implant-scanning strategy (TRI2), TRIOS Color (TRC), CEREC Omnicam (CER), and CEREC Primescan (PS). The same procedure was repeated with 4 different levels of free gingiva (G0-G3). Ten conventional impressions were obtained. Differences in implant position and direction were evaluated at the implant shoulder as mean values for trueness and interquartile range (IQR) for precision. Statistical analysis was performed by using the Kruskal-Wallis and post hoc Conover tests (α=.05)., Results: At G0, position deviations ranged from 34.8 μm (IQR 23.0 μm) (TRC) to 68.3 μm (12.2 μm) (CER). Direction deviations ranged from 0.34 degrees (IQR 0.18 degrees) (conventional) to 0.57 degrees (IQR 0.37 degrees) (TRI2). For digital systems, the position deviation ranged from 48.4 μm (IQR 5.9 μm) (PS) to 76.6 μm (IQR 8.1 μm) (TRC) at G1, from 36.3 μm (IQR 9.3 μm) (PS) to 79.9 μm (IQR 36.1 μm) (TRI1) at G2, and from 51.8 μm (IQR 14.3 μm) (PS) to 257.5 μm (IQR 106.3 μm) (TRC) at G3. The direction deviation ranged from 0.45 degrees (IQR 0.15 degrees) (CER) to 0.64 degrees (IQR 0.20 degrees) (TRC) at G1, from 0.38 degrees (IQR 0.05 degrees) (PS) to 0.925 degrees (IQR 0.09 degrees) (TRI) at G2, and from 0.44 degrees (IQR 0.07 degrees) (PS) to 1.634 degrees (IQR 1.08 degrees) (TRI) at G3. Statistical analysis revealed significant differences among the test groups for position (G0: P<.001; G1: P<.05; G2: P<.001; G3: P<.001) and direction (G0: P<.005; G1: P<.001; G2: P<.001; G3: P<.001)., Conclusions: Without soft tissue interference, the accuracy of certain digital scanning systems was comparable with that of the conventional impression technique. The amount of flexible soft tissue interference affected the accuracy of the digital scans., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: To determine the capacity of ultrasonographic image-based measurements of gingival height and alveolar bone level for monitoring periodontal health and disease., Methods: Sixteen subjects were recruited from patients scheduled to receive dental care and classified as periodontally healthy ( n = 10) or diseased ( n = 6) according to clinical guidelines. A 40-MHz ultrasound system was used to measure gingival recession, gingival height, alveolar bone level, and gingival thickness from 66 teeth for comparison to probing measurements of pocket depth and clinical attachment level. Interexaminer variability and comparison between ultrasound measurements and probing measurements was performed via Bland-Altman analysis., Results: Gingival recession and its risk in non-recessed patients could be determined via measurement of the supra- and subgingival cementoenamel junction relative to the gingival margin. Interexaminer bias for ultrasound image analysis was negligible (<0.10 mm) for imaged gingival height (iGH) and 0.45 mm for imaged alveolar bone level (iABL). Diseased subjects had significantly higher imaging measurements (iGH, iABL) and clinical measurements (probing pocket depth, clinical attachment level) than healthy subjects ( p < 0.05). Subtraction of the average biologic width from iGH resulted in 83% agreement (≤1 mm difference) between iGH and probing pocket depth measurements., Conclusions: Ultrasonography has an equivalent diagnostic capacity as gold-standard physical probing for periodontal metrics while offering more detailed anatomical information.

Objectives: The aim was to retrieve the threshold of gingival thickness (GT), where the attribute of gingival translucency through probe visibility was altered., Methods: In 200 patients, the soft tissue thickness was evaluated at both central mandibular incisors using ultrasound quantification (USD). Additionally, probe visibility was determined using a standard periodontal probe (PB) (CPU 15 UNC, Hu-Friedy), inserted 1 mm deep into the gingival sulcus. Frequencies and relative frequencies were calculated. Repeatability analyses and receiver operating characteristics (ROC) were conducted to determine the USD cut-off point for probe visibility., Results: Regression model indicated that the probe was not visible at a thickness of 0.82 mm for the mandibular left central incisor (95% CIs 0.77, 0.86) and became visible at a thickness of 0.69 mm (95% CIs 0.65, 0.72). The respective values for the mandibular right central incisor were 0.82 mm (95% CIs 0.77, 0.87) and 0.70 mm (0.68, 0.74). ROC analysis confirmed the retrieved regression results by indicating the best fitting balance for specificity and sensitivity at a thickness of 0.8 mm for both mandibular incisors., Conclusions: In the frame of the current study, the data revealed that gingiva becomes non-transparent at a thickness of approximately 0.8 mm., Clinical Relevance: Probe visibility at mandibular incisors for the discrimination between thin and thick soft tissues was correlated with a gingival thickness of 0.8 mm and a high repeatability., (© 2022. The Author(s).)

Background: Despite many advances in dentistry, no objective and quantitative method is available to evaluate gingival shape. The surface curvature of the optical scans represents an unexploited possibility. The present study aimed to test surface curvature estimation of intraoral scans for objective evaluation of gingival shape., Methods: The method consists of four main steps, i.e., optical scanning, surface curvature estimation, region of interest (ROI) definition, and gingival shape analysis. Six different curvature measures and three different diameters were tested for surface curvature estimation on central (n = 78) and interdental ROI (n = 88) of patients with advanced periodontitis to quantify gingiva with a novel gingival shape parameter (GS). The reproducibility was evaluated by repeating the method on two consecutive intraoral scans obtained with a scan-rescan process of the same patient at the same time point (n = 8)., Results: Minimum and mean curvature measures computed at 2 mm diameter seem optimal GS to quantify shape at central and interdental ROI, respectively. The mean (and standard deviation) of the GS was 0.33 ± 0.07 and 0.19 ± 0.09 for central ROI using minimum, and interdental ROI using mean curvature measure, respectively, computed at a diameter of 2 mm. The method's reproducibility evaluated on scan-rescan models for the above-mentioned ROI and curvature measures was 0.02 and 0.01, respectively., Conclusions: Surface curvature estimation of the intraoral optical scans presents a precise and highly reproducible method for the objective gingival shape quantification enabling the detection of subtle changes. A careful selection of parameters for surface curvature estimation and curvature measures is required., (© 2022. The Author(s).)

Purpose: This study investigated and tested a novel cone-beam computed tomography (CBCT) scanning technique capable of obtaining clear contours of soft tissues in the esthetic area., Methods: Twenty-three periodontally healthy participants underwent this novel CBCT scanning technique. Soft tissue morphological parameters were measured on the CBCT images obtained. Intraoral clinical data were also collected at the same locations, and the accuracy of the CBCT method was tested., Results: The median (interquartile range [IQR]) of the supracrestal gingival tissue thickness as 0.91 (0.73-1.13) mm, and the thickness of the central incisors was significantly greater than that of the canines (P < 0.05). The median (IQR) of keratinized tissue thickness was 0.73 (0.55-0.91) mm, which also showed a significantly greater thickness in the central incisors than in the canines (P < 0.05). Bland-Altman analysis suggested that CBCT could be accurate for measuring soft tissues in the esthetic area., Conclusion: The novel CBCT technique described yields clear contours of soft tissues in the esthetic area without the need for auxiliary tools. Moreover, measurements of soft tissue morphological parameters on CBCT appear to be accurate.

Objectives: To evaluate the correlation between smile type (ST) and the periodontal phenotype (PP)., Material and Methods: Clinical and photographic examinations of 164 participants (48 men and 116 women, mean age 22.9 ± 4.6 years) were performed, including an evaluation of ST (high, average, and low), gingival phenotype (GP) by transparency of the periodontal probe (TRAN), keratinized tissue width (KTW), gingival architecture (GA), tooth shape (TS), and papilla height (PH). A subgroup of 70 participants underwent soft-tissue cone-beam tomographic examinations (ST-CBCT), in which GP, gingival thickness (GT), buccal bone thickness (BBT), and the distances from the gingival margin and cementoenamel junction to the buccal bone crest (GM-BBC and CEJ-BBC) were evaluated. The data were analyzed using one-way ANOVA, Student's t-test, and chi-square tests, with the level of significance set at 0.05., Results: High, average, and low STs were found in 31.7%, 56.7%, and 11.6% of the participants, respectively. Sex (p=0.001), GP evaluated using TRAN (p=0.021) and ST-CBCT scans (p=0.009), GA (p<0.001), and TS (p=0.001), were associated with STs. The prevalence of thin GP was: 63% in low, 50% in average, and 38% in high smile types. KTW (p=0.004), PH (p<0.001), GT at different landmarks (p<0.05), CEJ-BBC (p=0.017), and GM-BBC (p=0.001) were significantly different among STs. The highest GT and KTW were found in the high-smile group, average-smile presented the higher CEJ-BBC while GM-BBC and PH, were higher in low-smile group., Conclusion: Periodontal phenotype components presented important difference over the smile types., Clinical Relevance: A detailed examination of smile types is an essential part of treatment planning, especially when the patient has high esthetic demands. Clinical and tomographic individual analysis of periodontal phenotypes over the smile types may be helpful for a case-by-case approach, and for the development of well-defined treatment protocols., (Copyright © 2022. Published by Elsevier Ltd.)

Objective: Measurement of the periodontal soft tissue dimension is crucial for clinical decision-making and aesthetic prognosis. However, the effectiveness of different measuring methods remains unclear. This systematic review aimed to explore the diagnostic accuracy of two non-invasive methods (namely CBCT and ultrasound) for gingival thickness measurement at different tooth positions., Materials and Methods: A systematic search was performed using PubMed (including Medline), PubMed Central, OVID, Cochrane Library, LILACS and OpenGrey. Studies focusing on comparisons between CBCT, ultrasound and direct transgingival probing were included. The means, SDs and correlation coefficients with 95% confidence intervals were extracted and analyzed using Review Manager and R software., Results: Twelve studies were selected. No significant difference was found between CBCT measurement and transgingival probing in the anterior and posterior dentition, and a moderate correlation was observed between these two methods (r = 0.41). A weak correlation was found between ultrasound measurement and transgingival probing (r = 0.32), and a slight but statistically significant difference was found when comparing ultrasonic devices and transgingival probing in the posterior area., Conclusion: CBCT can be considered a relatively reliable method for gingival thickness measurement in both the anterior and posterior areas compared with direct probing. Ultrasonic devices provide limited accuracy in the posterior area but are relatively comparable with direct clinical assessments in the anterior area., Clinical Significance: Measurement location may affect the diagnostic accuracy and repeatability of gingival thickness measurements. Appropriate method selection in different clinical scenarios is crucial to aesthetic outcome prediction and decision-making., (© 2022 Wiley Periodicals LLC.)