Search

One of the most intriguing 6G vertical markets is precision agriculture, where communications, sensing, control, and robotics technologies are used to improve agricultural outputs and decrease environmental impact. Ambient IoT (A-IoT), which uses a network of devices that harvest ambient energy to enable communications, is expected to play an important role in agricultural use cases due to its low costs, simplicity, and battery-free (or battery-assisted) operation. In this paper, we review the use cases of precision agriculture and discuss the challenges. We discuss how A-IoT can be used for precision agriculture and compare it with other ambient energy source technologies. We also discuss research directions related to both A-IoT and precision agriculture., Comment: 7 pages, 4 figures and 2 tables

This paper proposes and analyzes novel deep learning methods for downlink (DL) single-user multiple-input multiple-output (SU-MIMO) and multi-user MIMO (MU-MIMO) systems operating in time division duplex (TDD) mode. A motivating application is the 6G upper midbands (7-24 GHz), where the base station (BS) antenna arrays are large, user equipment (UE) array sizes are moderate, and theoretically optimal approaches are practically infeasible for several reasons. To deal with uplink (UL) pilot overhead and low signal power issues, we introduce the channel-adaptive pilot, as part of an analog channel state information feedback mechanism. Deep neural network (DNN)-generated pilots are used to linearly transform the UL channel matrix into lower-dimensional latent vectors. Meanwhile, the BS employs a second DNN that processes the received UL pilots to directly generate near-optimal DL precoders. The training is end-to-end which exploits synergies between the two DNNs. For MU-MIMO precoding, we propose a DNN structure inspired by theoretically optimum linear precoding. The proposed methods are evaluated against genie-aided upper bounds and conventional approaches, using realistic upper midband datasets. Numerical results demonstrate the potential of our approach to achieve significantly increased sum-rate, particularly at moderate to high signal-to-noise ratio (SNR) and when UL pilot overhead is constrained.

New radio (NR) positioning in the Third Generation Partnership Project (3GPP) Release 18 (Rel-18) enables 5G-advanced networks to achieve ultra-high accuracy positioning without dependence on global navigation satellite systems (GNSS) with key enablers such as the carrier phase positioning technique, standardized for the first time in a cellular communications standard and setting a new baseline for future generations. In addition, Rel-18 NR supports positioning functionalities for reduced capability (RedCap) user equipment and bandwidth aggregation for positioning measurements. Moreover, the low power solutions are designed for low power high accuracy positioning use cases. Lastly, sidelink-based positioning is introduced in Rel-18. This article constitutes a comprehensive treatment of the Rel-18 NR positioning enhancements crucial for the development of next-generation networks.

High Altitude Platform Station (HAPS) has the potential to provide global wireless connectivity and data services such as high-speed wireless backhaul, industrial Internet of things (IoT), and public safety for large areas not served by terrestrial networks. A unified HAPS design is desired to support various use cases and a wide range of requirements. In this paper, we present two architecture designs of the HAPS system: i) repeater based HAPS, and ii) base station based HAPS, which are both viable technical solutions. The energy efficiency is analyzed and compared between the two architectures using consumption factor theory. The system performance of these two architectures is evaluated through Monte Carlo simulations and is characterized in metrics of spectral efficiency using LTE band 1 for both single-cell and multi-cell cases. Both designs can provide good downlink spectral efficiency and coverage, while the uplink coverage is significantly limited by UE transmit power and antenna gain. Using directional antennas at the UEs can improve the system performance for both downlink and uplink.

This letter provides a comparison of indoor radio propagation measurements and corresponding channel statistics at 28, 73, and 140 GHz, based on extensive measurements from 2014-2020 in an indoor office environment. Side-by-side comparisons of propagation characteristics (e.g., large-scale path loss and multipath time dispersion) across a wide range of frequencies from the low millimeter wave band of 28 GHz to the sub-THz band of 140 GHz illustrate the key similarities and differences in indoor wireless channels. The measurements and models show remarkably similar path loss exponents over frequencies in both line-of-sight (LOS) and non-LOS (NLOS) scenarios, when using a one meter free space reference distance, while the multipath time dispersion becomes smaller at higher frequencies. The 3GPP indoor channel model overestimates the large-scale path loss and has unrealistic large numbers of clusters and multipath components per cluster compared to the measured channel statistics in this letter., Comment: 5 pages, 1 figure, and 2 tables, letters

The capability to achieve high-precision positioning accuracy has been considered as one of the most critical requirements for vehicle-to-everything (V2X) services in the fifth-generation (5G) cellular networks. The non-line-of-sight (NLOS) connectivity, coverage, reliability requirements, the minimum number of available anchors, and bandwidth limitations are among the main challenges to achieve high accuracy in V2X services. This work provides an overview of the potential solutions to provide the new radio (NR) V2X users (UEs) with high positioning accuracy in the future 3GPP releases. In particular, we propose a novel selective positioning solution to dynamically switch between different positioning technologies to improve the overall positioning accuracy in NR V2X services, taking into account the locations of V2X UEs and the accuracy of the collected measurements. Furthermore, we use high-fidelity system-level simulations to evaluate the performance gains of fusing the positioning measurements from different technologies in NR V2X services. Our numerical results show that the proposed hybridized schemes achieve a positioning error $\boldsymbol{\leq}$ 3 m with $\boldsymbol{\approx}$ 76\% availability compared to $\boldsymbol{\approx}$ 55\% availability when traditional positioning methods are used. The numerical results also reveal a potential gain of $\boldsymbol{\approx}$ 56\% after leveraging the road-side units (RSUs) to improve the tail of the UE's positioning error distribution, i.e., worst-case scenarios, in NR V2X services., Comment: In Proceedings of IEEE 93rd Vehicular Technology Conference (VTC-Spring), Helsinki, Finland, Apr. 2021

Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication.

Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted waveform as a reference. To leverage the radar information for beamforming, the radar azimuth power spectrum (APS) and the communication APS should be similar. We outline a radar covariance correction strategy to increase the similarity between the radar and communication APS. We also propose a metric to compare the similarity of the radar and communication APS that has a connection with the achievable rate. We present simulation results based on ray-tracing data. The results show that: (i) covariance correction improves the similarity of radar and communication APS, and (ii) the radar-assisted strategy significantly reduces the training overhead, being particularly useful in non-line-of-sight scenarios.

This paper considers the following question for viable wide-area millimeter wave cellular networks. What is the maximum extended coverage area of a single fiber site using multi-hop relaying, while achieving a minimum target per user data rate? We formulate an optimization problem to maximize the minimum end-to-end per user data rate, and exploit unique features of millimeter wave deployments to yield a tractable solution. The mesh network is modeled as a $k-$ring urban-canyon type deployment, where $k$ is the number of hops back to the fiber site. The total number of relays per fiber site grows as $k^2$. We consider both integrated access-backhaul (IAB) and orthogonal access-backhaul (OAB) resource allocation strategies, as well as both half and full duplex base stations (BSs). With a few validated simplifications, our results are given as simple closed-form expressions that are easy to evaluate even for large networks. Several design guidelines are provided, including on the choice of routing and scheduling strategy, the maximum allowable self-interference in full duplex relays and role of dual connectivity to reduce load imbalance across BSs. For example, we show that for certain load conditions there is very little gain to IAB (as considered for 5G) as opposed to tunable OAB (using separate spectrum for access and backhaul links); the latter being significantly simpler to implement., Comment: under review, major revision, submitted to IEEE Trans. Wireless Commun

The millimeter wave spectra at 71-76GHz (70GHz) and 81-86GHz (80GHz) have the potential to endow fifth-generation new radio (5G-NR) with mobile connectivity at gigabit rates. However, a pressing issue is the presence of incumbent systems in these bands, which are primarily point-to-point fixed stations (FSs). In this paper, we first identify the key properties of incumbents by parsing databases of existing stations in major cities to devise several modeling guidelines and characterize their deployment geometry and antenna specifications. Second, we develop a detailed uplink interference framework to compute the aggregate interference from outdoor 5G-NR users into FSs. We then present several case studies in dense populated areas, using actual incumbent databases and building layouts. Our simulation results demonstrate promising 5G coexistence at 70GHz and 80GHz as the majority of FSs experience interference well below the noise floor thanks to the propagation losses in these bands and the deployment geometry of the incumbent and 5G systems. For the few FSs that may incur higher interference, we propose several passive interference mitigation techniques such as angular-based exclusion zones and spatial power control. Simulation results show that the techniques can effectively protect FSs, without tangible degradation of the 5G coverage., Comment: This work is accepted for publication in the IEEE Transactions on Wireless Communications

Millimeter wave spectrum access over the 70GHz and 80GHz is central to unlocking gigabit connectivity and meeting the explosive growth of mobile traffic. A pressing question, however, is whether fifth-generation (5G) systems can harmoniously coexist with the incumbents of these bands, which are primarily point-to-point fixed stations (FSs). To this end, we thoroughly analyze the impact of 5G coexistence on FSs. Specifically, we first analyze the geometry of existing FSs' deployment using actual databases of these stations. Then, we present a case study on the interference generated from users towards FSs in two populated areas in Chicago, where we use actual building databases to accurately compute the aggregate interference. The analysis and simulation results reveal that the deployment strategy of FSs and the high attenuation losses at 70/80GHz significantly limit the 5G interference, with the majority of FSs experiencing interference levels well below the noise floor., Comment: to be published in 2017 IEEE Global Communications Workshops (GC Wkshps), Singapore, Dec. 2017

This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The measurements consisted of ten random receiver locations at pedestrian level (1.4 meters) and ten random transmitter locations at lamppost level (4.0 meters) that provided 36 individual transmitter-receiver (TX-RX) combinations. For each of the 36 radio links, extensive directional measurements were made to give insights into small-cell base station diversity at millimeter-wave (mmWave) bands. High-gain steerable horn antennas with 7-degree and 15-degree half-power beamwidths (HPBW) were used at the transmitter (TX) and receiver (RX), respectively. For each TX-RX combination, the TX antenna was scanned over a 120-degree sector and the RX antenna was scanned over the entire azimuth plane at the strongest RX elevation plane and two other elevation planes on both sides of the strongest elevation angle, separated by the 15-degree HPBW. Directional and omnidirectional path loss models were derived and match well with the literature. Signal reception probabilities derived from the measurements for one to five base stations that served a single RX location show significant coverage improvement over all potential beamformed RX antenna pointing angles. CDFs for nearest neighbor and Best-N omnidirectional path loss and cell outage probabilities for directional antennas provide insights into coverage and interference for future mmWave small-cells that will exploit macro-diversity and CoMP., Comment: to be published in 2017 IEEE Global Communications Workshops (GC Wkshps), Singapore, Dec. 2017

Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to rates of multiple Gbps (gigabit per second) per user. Though mmWave can be readily used in stationary scenarios such as indoor hotspots or backhaul, it is challenging to use mmWave in mobile networks, where the transmitting/receiving nodes may be moving, channels may have a complicated structure, and the coordination among multiple nodes is difficult. To fully exploit the high potential rates of mmWave in mobile networks, lots of technical problems must be addressed. This paper presents a comprehensive survey of mmWave communications for future mobile networks (5G and beyond). We first summarize the recent channel measurement campaigns and modeling results. Then, we discuss in detail recent progresses in multiple input multiple output (MIMO) transceiver design for mmWave communications. After that, we provide an overview of the solution for multiple access and backhauling, followed by analysis of coverage and connectivity. Finally, the progresses in the standardization and deployment of mmWave for mobile networks are discussed.

Initial deployments of millimeter wave (mmWave) cellular networks are likely to be enabled with self-backhauling. In this work, we propose a random spatial model to analyze uplink (UL) and downlink (DL) SINR distribution and mean rates corresponding to different access-backhaul and UL-DL resource allocation schemes in a self-backhauled mmWave cellular network with Poisson point process (PPP) deployment of users and base stations. In particular, we focus on heuristic implementations of static and dynamic time division duplexing (TDD) for access links with synchronized or unsynchronized access-backhaul (SAB or UAB) time splits. We propose PPP approximations to characterize the distribution of the new types of interference encountered with dynamic TDD and UAB. These schemes offer better resource utilization than static TDD and SAB, however potentially higher interference makes their choice non-trivial and the offered gains sensitive to different network parameters, including UL/DL traffic asymmetry, user load per BS or number of slave BSs per master BS. One can harness notable gains from UAB and/or dynamic TDD only if backhaul links are designed to have much larger throughput than the access links., Comment: appeared in IEEE Transactions on Wireless Communications. Corrected some typos compared to previous ArXiv version

This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3GPP, and for use in the design of fifth generation (5G) wireless systems in urban macrocell, urban microcell, and indoor office and shopping mall scenarios. Here we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement datasets from 2 GHz to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity analyses of the three models show that the physically-based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity testing across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1 m close-in reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification -- by replacing a floating non-physically based constant with a frequency-dependent constant that represents free space path loss in the first meter of propagation., Comment: Open access available at: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7434656