Search

Background: To evaluate the effectiveness of Er:YAG and Nd:YAG laser on dentin hypersensitivity prevention, associated or not to acidulated phosphate fluoride (APF) after erosive challenge., Material and Methods: 104 specimens were obtained from bovine dentine and divided into groups (n=13): G1: Er:YAG; G2: Er:YAG followed by application of APF; G3: application of APF followed by Er:YAG, simultaneously; G4: Nd:YAG; G5: Nd:YAG followed by application of APF; G6: application of APF followed by Nd:YAG, simultaneously; G7:application of APF; G8: untreated. The parameters for Er:YAG were:10s, distance of 4mm, water cooling flow of 2mL/min, 2Hz, 3.92J/cm2. For the Nd:YAG: 10s, distance of 1mm, without cooling, 10Hz, 70.7J/cm2. The erosive drink was a cola at 4°C, 3×/day for 1 minute, for 5 days. Roughness and wear analysis were done in confocal laser microscope. Data were statistically analyzed (α=0.05)., Results: As regards roughness, there was no statistically difference among the groups. The groups irradiated with Er:YAG had a volume loss lower. G6 showed higher values than the groups irradiated with Er:YAG and lower than the other groups. The other groups irradiated with Nd:YAG showed similar wear results to the control., Conclusions: The Er:YAG laser showed the lowest volume loss from wear analysis, suggesting the increased the acid resistance of dentin. Key words: Dentine sensitivity, Lasers, Sodium fluoride., Competing Interests: Conflicts of interest The authors declare that they have no conflict of interest., (Copyright: © 2024 Medicina Oral S.L.)

Aim: To evaluate the presence of Streptococcus mutans (SM), main pathogen of dental caries, interleukin-6 and -10 in samples of amniotic fluid (AF) and clinical and oral data of the healthy pregnancy, to investigate the SM exposition in intrauterine life and to elucidate the presence of antibodies to SM in newborns' saliva (SA) with undetectable levels of this microorganism described in the previous study., Methods: The study involved the participation of 26 women with term deliveries and without gestational complications. General health data were collected through a questionnaire applied to the participants. The volunteers were examined orally, the caries experience (decayed, missing, and filled teeth (DMFT) scores) was calculated and unstimulated SA was collected. The acquisition of AF was performed during cesarean sections and stocked on ice. The analysis of the presence of SM-DNA was performed by real-time PCR assays with specific primers. Levels of IL-6 and IL-10 were performed by ELISA with specific kits for these interleukins in the AF samples., Results: 69.2% of the AF samples had detectable SM, and 65% of the women had the bacteria in the AF and SA at the same time. There was a positive association between the presence of SM in AF and a report of not going to the dentist frequently ( p <.05). There was no statistically significant difference between the frequency of AF with or without detection of MS and active caries ( p >.05). However, the DMFT scores of women with positive AF for SM were higher than that of women without detectable MS ( p <.05). IL-6 levels were higher than IL-10 in AF ( p <.05). There were no significant differences in the levels of interleukins between samples with detectable SM or in AF and even with clinical data analysis ( p >.05)., Conclusions: The AF samples have SM in quantifiable levels, probably associated with the greatest caries experience, and seen by the highest DMFT index. Interleukin levels were not related to the presence of MS. The presence of SM in AF may explain the mucosal immune stimulation of newborn children by the previous detection of salivary antibodies against SM.

Context: A promising option for the prevention of dental caries is the use of laser irradiation., Aims: Evaluate the effects of Er:YAG, Nd:YAG, and CO 2 laser irradiation, associated or not to 2% sodium fluoride (2% NaF), on root caries prevention., Material and Methods: One hundred and four human root dentin samples were divided in eight groups (n = 13). A 9-mm 2 -area on each dentin sample was delimited and treated as follows: G1: no treatment (control); G2: 2% NaF; G3: Er:YAG; G4: 2% NaF + Er:YAG; G5: Nd:YAG; G6: 2% NaF + Nd:YAG; G7: CO 2 ; G8: 2% NaF + CO 2 . When used, the 2% NaF was applied before irradiation for 4 min. The samples were subjected to a 2-week cariogenic challenge, consisted of daily immersion in de-remineralizing solutions for 6 h and 18 h, respectively. Knoop hardness (KHN) were evaluated (10 g and 20 s) at different depths from the dentin surface. The samples (n = 3) were prepared for scanning electron microscopy (SEM). Microhardness data were analysed by one-way analysis of variance (ANOVA) and Fisher's test (α = 5%)., Results: The Er:YAG laser group (KHN = 41.30) promoted an increase in acid resistance of the dentin (P < 0.05) when compared to all groups. There was no synergism between laser irradiation and 2% NaF application. Morphological changes were observed after irradiation with all lasers; carbonization and cracks were also observed, except when Er:YAG were used., Conclusions: Er:YAG laser irradiation can safely increase the acid resistance of the dentin surface of the root, since it promoted a significant increase in surface hardness. The application of 2% NaF did not result in a synergistic effect., Competing Interests: None

Aim: To evaluate the initial adhesion and formation of Streptococcus mutans biofilm in vitro in the presence of saliva, human colostrum and 3'-sialyllactose., Methods: Human colostrum and salivas were collected from 30 mothers and newborn postpartum. Eighteen hours culture of S. mutans was treated with colostrum or 3'-sialyllactose in three different moments: before, during, and after 24 h from the microbial inoculation. Salivas were also tested in conjunction with colostrum. The assays were realized in sterile 96-well flat-bottom microtiter plates for 24 h. The biofilms were fixed, washed, stained with crystal violet, and extracted. Absorbance was measured to evaluate biofilm growth mass., Results: Colostrum applied after and during the inoculation decreased biofilm formation when compared with the control ( p  < .05). The presence of saliva increased the biofilm biomass ( p  < .05). The application of 3'-sialyllactose reduced biofilm formation independently of moments of application ( p  < .05)., Conclusion: Saliva contributed to the proliferation of biofilm and colostrum did not prevent the initial adhesion, but interfered in the accumulation and development of microorganisms in biofilms. 3'-sialyllactose significantly decreased biofilm formation. This information expands the importance of colostrum as a potent oral antimicrobial biofluid.

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Purpose: To evaluate the influence of the Er,Cr:YSGG laser with or without the 5% fluoride varnish on the acid resistance of dentin after erosive challenge., Methods: 36 incisors were selected and sectioned, obtaining 72 specimens of 4 mm × 4 mm and randomly divided into eight groups (n = 9). In G1: application of Er,Cr:YSGG (0.1W; 5Hz, air 55%); G2: laser (0.25W; 5Hz, air 55%); G3: fluoride varnish + laser (0.1W; 5Hz, air 55%); G4: fluoride varnish + laser (0.25W, 5Hz, air 55%); G5: fluoride varnish + laser (0.1W; 5Hz, without air); G6: fluoride varnish + laser (0.25W, 5Hz, without air); G7: fluoride varnish and G8: no treatment. When used, the laser was irradiated without water cooling, scanning mode during 10 seconds. The surface roughness data were subjected to ANOVA. For wear profile, we used Kruskal-Wallis test and Dunn post-hoc, all with α= 0.05., Results: The results showed no statistically significant difference when comparing the groups as regards to the surface roughness (P> 0.05). Regarding the percentage of lost volume, the G5 and G6 groups presented the best results (G5 = 7.8% and G6 = 8.5%), with the lowest loss of dentin volume compared to other groups (P< 0.05). The G8 group (no treatment) had the highest lost volume (G8 = 39.1% followed by the G7 group (fluoride varnish), which had 25.9%., Clinical Significance: The use of Er,Cr:YSGG laser and fluoride varnish can be an effective method to increase the acid resistance of dentin after erosive challenges, and limit problems related to hypersensitivity., Competing Interests: The authors declared no conflict of interest. The study was supported by FAPEMIG (Fundação de Amparo à Pesquisa do Estado de Minas Gerais) (PEE-01689-16) and CAPES (Coordenação de Aperfeiçoamento de Pessoal de Nível Superior) (Finance Code 001)., (Copyright©American Journal of Dentistry.)

This in vitro study evaluated the influence of the Er,Cr:YSGG laser, associated or not to desensitizing agents, in the prevention of acid erosion in bovine root dentin. Eighty dentin specimens were selected and divided into eight groups (n = 10): G1: negative control; G2: positive control (5% fluoride varnish-FV); G3: Er,Cr:YSGG laser; G4: FV + laser; G5: 3% potassium oxalate; G6: 3% potassium oxalate + laser; G7: biphasic calcium silicate/phosphate gel (gel); G8: gel + laser. Laser parameters: 0.5 W, 6.25 J/cm 2 at 1-mm distance. The erosive drink used was a cola soft-drink (pH = 2.42 at 4 °C), lasting 5 min, twice a day, with 6-h intervals between the challenges, during 14 days. Kolmogorov-Smirnov and Levene's tests were satisfied. The surface roughness data were submitted to ANOVA and Tukey post hoc tests. For the wear profile, Kruskal-Wallis and Dunn post hoc tests were used. Afterwards, the Spearman correlation test was performed. All statistical tests assumed a significance level of 5% (α = 0.05). G1 presented the highest surface roughness value after the erosive challenge (3.586 μm 2  ± 0.205 μm 2 ) and the G7 presented the lowest surface roughness value after the erosive challenge (1.071 μm 2  ± 0.180 μm 2 ). For the lost volume, G4 presented the lowest percentage (9.7% ± 0.9%), while G1 had the highest percentage (41.8% ± 2.5%), both with p < 0.05. There was a weak correlation between the response variables (ρ = 0.33). All groups presented lower values of surface roughness and loss of volume when compared to the negative control group. For the surface roughness, the biphasic calcium silicate/phosphate gel presented the best result. For volume loss, the 5% fluoride varnish + Er,Cr:YSGG laser showed the best results compared to the other groups.

Objective: To detect Streptococcus mutans in colostrum and saliva of neonates and compare with its detection in saliva of mothers., Methods: Forty-three healthy women, full-term gestations with no complications, submitted to elective Cesarean section, and their newborns were included in the study. Samples were investigated by polymerase chain reaction to detect S. mutans in genetic material from the samples., Results: Approximately 16% of colostrum samples showed S. mutans , but not correlated with the presence of the bacteria in both samples of saliva. S. mutans was detected in 49 and 30% of saliva samples of mothers and neonates, respectively. There was a positive correlation in S. mutans detection between types of saliva. The number of maternal samples of saliva with detectable S. mutans was smaller in women receiving dental treatment during pregnancy. Tooth brushing, three times a day, influenced the detection of S. mutans in both the saliva and the colostrum., Conclusion: Although maternal saliva may present S. mutans , few samples of colostrum present the bacteria. The presence of bacteria in neonate saliva may be related to contact before birth. Dental treatment and hygiene habits seem to influence the detection of S. mutans in samples of maternal saliva and colostrum.

The aims of this study were to analyze the presence of Streptococcus mutans (SM)-DNA in cord blood (CB), maternal peripheral blood (PB), and maternal saliva (SA) and compare with data collected in health surveys. Sixty-four healthy women with pregnancies to term and without complications attending for elective cesarean section in the Clinical Hospital of Ribeirao Preto, Sao Paulo were included. Samples of PB and unstimulated SA were obtained on the day of hospitalization and samples of CB were collected after the delivery section. Samples were investigated using polymerase chain reaction for the presence of SM-DNA using specific primers. The results show over 50% of the sample of PB and CB showed SM-DNA detectable. There was a positive correlation between the SM detection in PB/CB and SA (P < 0.05). Pregnant women, who reported tooth brushing more than three times a day, often showed detectable SM-DNA in PB and CB (P < 0.05). In conclusion, the majority of children can have contact with SM-DNA during the intrauterine life by the CB. SM probably transferred from salivary habitat to PB and CB. The tooth brushing can be associated to S. mutans detection in blood samples.

Objectives: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC., Materials and Methods: For 3 days, the specimens were subjected to three 20-minute applications of a 37% H 2 O 2 -based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests ( α = 0.05) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test ( α = 0.05), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test ( α = 0.05), and the t -test for independent samples ( α = 0.05)., Results: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs., Conclusions: The bleaching agent with 37% H 2 O 2 affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition., Competing Interests: Conflict of Interest: No potential conflict of interest relevant to this article was reported.

The treatments for dentin hypersensitivity (DH) may change the surface roughness of the root dentin, which can lead to biofilm accumulation, increasing the risk of root caries. The aim was to compare the surface roughness of root dentin after different treatments of DH and the biofilm formation on those surfaces. After initial surface roughness (Sa) assessment, 50 bovine root fragments received the following treatments (n = 10): G 1-no treatment; G2-5% sodium fluoride varnish; G3-professional application of a desensitizing dentifrice; G4-toothbrushing with a desensitizing dentifrice; and G5-diode laser application (908 nm; 1.5 W, 20 s). The Sa was reevaluated after treatments. Afterward, all samples were incubated in a suspension of Streptococcus mutans at 37 °C for 24 h. The colony-forming units (CFU) were counted using a stereoscope, and the results were expressed in CFU/mL. The one-way ANOVA and the Tukey's tests compared the roughness data and the results obtained on the bacterial adhesion test (α = 5%). G2 (2.3 ± 1.67%) showed similar Sa variation than G1 (0.25 ± 0.41%) and G5 (5.69 ± 0.99%), but different from group G3 (9.05 ± 2.39%). Group 4 showed the highest Sa variation (30.02 ± 3.83%; p < 0.05). Bacterial adhesion was higher in G4 (2208 ± 211.9), suggesting that bacterial growth is greater on rougher surfaces. The diode laser and the conventional treatments for DH may change the surface roughness of the root dentin, but only brushing with desensitizing dentifrice induced a higher bacteria accumulation on root dentin surface.

Objective: To describe e compare the specificity of IgA antibodies against bacteria extract of Klebsiella pneumoniae , Staphylococcus aureus , Escherichia coli , and Salmonella enteritidis ., Methods: Colostrum samples were aseptically collected in the first 12 hours after C-section delivery. The specificity of IgA against bacteria extracts was analyzed by the Western blot., Results: The findings showed proteins of high molecular weight frequently detectable in the samples. S. aureus was the most frequently found bacterium in the samples (p<0.05). Approximately 93.8, 56.3, 62.5 and 60.4% of samples presented IgA reactive to S. aureus , K. pneumoniae , S. enteritidis, and E. coli, respectively. Roughly 40% of samples showed no IgA reactive to K. pneumoniae, S. enteritidis and E. coli ., Conclusion: Clinical evidence of the importance of breastfeeding for the immune protection of neonates was consistent with the observed immunological findings, since most samples showed IgA reactive against the species tested. The application and development of immunotherapies during pregnancy, focused on frequently detected antigens, could be an important tool to enhance the presence of IgA in colostrum.

The present study compared IgA specificity against oral streptococci in colostrum and saliva samples. Sixty-two mother-and-child pairs were included; samples of colostrum (C) and saliva (MS) were collected from the mothers and saliva samples were collected from babies (BS). The specificity of IgA against Streptococcus mutans and S. mitis were analyzed by western blot. Only 30% of babies' samples presented IgA reactivity to S. mutans, while 74 and 80% of MS and C, respectively, presented this response. IgA reactivity to S. mutans virulence antigens (Ag I/II, Gtf and GbpB) in positive samples showed differences between samples for Gtf and especially for GbpB (p < 0.05), but responses to Ag I/II were similar (p > 0.05). The positive response of Gtf-reactive IgA was different between C (90%) and MS (58%) samples (p < 0.05), but did not differ from BS (p > 0.05). GbpB was the least detected, with 48 and 26% of C and MS, and only 5% of BS samples presenting reactivity (p > 0.05). Eight percent of MS and C samples presented identical bands to SM in the same time-point. In conclusion, the differences of IgA response found between C and MS can be due to the different ways of stimulation, proliferation and transportation of IgA in those secretions. The colostrum has high levels of IgA against S. mutans virulence antigens, which could affect the installation and accumulation process of S. mutans, mainly by supplying anti-GbpB IgA to the neonate.

The aim was to evaluate the surface roughness and bacterial adhesion on enamel irradiated with high intensity lasers, associated or not to a fluoride varnish. Eighty fragments of bovine enamel were equally divided in 8 groups (n=10). Group 1 was not treated and Group 2 received only a 5% fluoride varnish application. The other groups were irradiated with an Er:Cr:YSGG (8.92 J/cm2), an Nd:YAG (84.9 J/cm2) and a diode laser (199.04 J/cm2), associated or not to a 5% fluoride varnish. The surface roughness was measured before and after treatments. Afterward, all samples were incubated in a suspension of S. mutans at 37 °C for 24 h. The colony-forming units (CFU) were counted by a stereoscope and the results were expressed in CFU/mm2. One-way ANOVA and the Tukey´s test compared the roughness data and the Student´s test compared the results obtained in the bacterial adhesion test (a=5%). The results showed that the irradiated samples without varnish presented the same roughness and the same bacterial adhesion that the non-irradiated samples. However, samples irradiated in the presence of fluoride varnish showed higher surface roughness and higher bacterial adhesion than the non-irradiated samples and those irradiated without varnish. Presence of pigments in the varnish increased the lasers' action on the enamel surface, which produced ablation in this hard tissue and significantly increased its surface roughness. For this reason, the enamel's susceptibility to bacterial adhesion was higher when the irradiation of the samples was made in presence of fluoride varnish.

The objective of this study was to evaluate the effects of diode laser and a desensitizing dentifrice on dentin permeability. Fifty-two root dentin fragments were obtained (5 × 5mm) and treated with 24% EDTA gel. The samples were divided into 4 groups (n = 13): G1, control (no treatment); G2, diode laser (λ = 908 nm, 1.5 W, continuous mode, 20s); G3, application of abrasive dentifrice for 1 minute (Elmex Sensitive Professional (International Gaba); and G4, application of abrasive dentifrice for 1 minute followed by irradiation with diode laser. Ten samples per group were immersed in 2% methylene blue solution for 4h. The specimens were washed, longitudinally sectioned, observed under optical microscopy, photographed and assessed based on the degree of dye leakage. The remaining samples were observed under scanning electron microscopy (SEM). The leakage data were subjected to ANOVA test, followed by Tukey's t-test (α = 5%). Groups 2, 3 and 4 showed less dye penetration than the control group (p < 0.05), but were similar among each other. SEM images showed that dentinal tubules were open in G1, and fused and occluded in G2. Group 3 showed dentinal tubules that were occluded by the metal ions from the toothpaste. G4 presented similar characteristics to G3, and the presence of fused dentin. The diode laser and the dentifrice were effective in reducing dentinal permeability, and the combination of the two treatments did not show better results than either one used alone.

Objectives: Secretory immunoglobulins present in mucosa surfaces represent the first line of defense of the adaptive immune system against infectious challenges. Preterm (PT) neonates' humoral immunity is diminished compared to full-term (FT) newborns. The identification of important antigens (Ags) of virulence of oral species may help in the investigation of the mechanisms of antigenic stimulation and the development of the mucosal immune response. In the present study, we measured saliva levels of immunoglobulins A (IgA) and M (IgM) and characterized the specificity of IgA against Ags of several streptococcal species found early in life., Methods: This was a prospective observational study. Salivary IgA (sIgA) antibody responses to bacterial species that are prototypes of pioneer (Streptococcus mitis, S. sanguinis, S. gordonii) and pathogenic (Streptococcus mutans) microorganisms of the oral cavity were studied in FT and PT children in two visits: at birth (T0) and at 3 months of age (T3). Salivas from 123 infants (72 FT and 51 PT) were collected during the first 10h after birth (T0) and again at 3 months of age (T3). Salivary levels of IgA and IgM antibodies were analysed by enzyme-linked immunosorbent assay (ELISA). A subgroup of 26 FT and 24 PT children were compared with respect to patterns of antibody specificities against different streptococci Ags using Western blot assays., Results: No significant differences (P>0.05) in salivary levels of IgA and IgM between FT and PT babies were found at birth. At T3, mean sIgA values were similar between groups and sIgM levels were significantly higher in PT than FT (P<0.05). Western blot assays identified positive IgA response to streptococci in the majority of children, especially in the FT group. There were some differences between groups in relation to the frequency of children with positive response to Ags and intensity of IgA response. In general, oral streptococci Ags were more frequently detected and bands were more intense in FT than in PT, especially in T3. Prospective analysis of patterns of sIgA against Ags of different streptococcal species revealed an increase in complexity of the sIgA antibody response from the first day of birth (T0) to T3 in PT and FT., Conclusion: The patterns of sIgA response to streptococci Ags appear to be influenced by the gestational age, which might reflect the level of immunological maturity of the mucosal immune system., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Streptococcus mutans (SM) have three main virulence antigens: glucan binding protein B (gbpB), glucosyltransferase (Gtf) and antigens I/II (Ag I/II) envolved in the capacity of those bacteria to adhere and accumulate in the dental biofilm. Also, the glycosyltransferases 153 kDa of Streptococcus gordonii (SGO) and 170kDa of Streptococcus sanguinis (SSA) were important antigens associated with the accumulation of those bacterias. Streptococcus mitis (SMI) present IgA1 protease of 202 kDa. We investigated the specificity and levels IgA against those antigens of virulence in samples of human colostrum. This study involved 77 samples of colostrum that were analyzed for levels of immunoglobulian A, M and G by Elisa. The specificity of IgA against extracts of SM and initials colonizators (SSA, SMI, SGO) were analyzed by the Western blot. The mean concentration of IgA was 2850.2 (±2567.2) mg/100 mL followed by IgM and IgG (respectively 321.8±90.3 and 88.3±51.5), statistically different (p<0.05). Results showed that the majority of samples had detectable levels of IgA antibodies to extracts of bacteria antigens and theirs virulence antigens. To SM, the GbpB was significantly lower detected than others antigens of SM (p<0.05). High complexities of response to Ags were identified in the samples. There were no significant differences in the mean number of IgA-reactive Ags between the antigens (p>0.4). So, the breast milk from first hours after birth presented significant levels of IgA specific against important virulence of antigens those oral streptococci, which can disrupt the installation and accumulation process of these microorganisms in the oral cavity., (Copyright © 2014 Elsevier GmbH. All rights reserved.)

Purpose: This study's purpose was to evaluate the acid resistance of demineralized enamel irradiated with high-intensity lasers., Methods: Enamel fragments were demineralized and treated as follows (N=10): Group 1-no treatment; Group 2-five percent sodium fluoride (NaF) varnish; Group 3-Er, Cr:YSGG laser (8.92 J/cm2, 0.5 W, 20 Hz, 30 seconds); Group 4-NaF and Er, Cr:YSGG laser; Group 5-Er, Cr:YSGG laser and NaF; Group 6-Nd:YAG laser (84.9 J/cm2, 0.5 W, 10 Hz, 30 seconds); Group 7-NaF and Nd:YAG laser; and Group 8-Nd:YAG laser and NaF. The samples were subjected to pH-cycling and assessed by microhardness (analysis of variance; α equals five percent) at different depths from the outer enamel surface. Samples were observed using polarized light microscopy (PLM) and scanning electron microscopy (SEM)., Results: There were no significant differences among the experimental groups in any of the subsurface layers evaluated. PLM observation revealed that the extent of demineralization of the irradiated samples was similar to the samples for Group 1 (control). SEM observation showed that irradiated surfaces were ablated and presented areas of melting., Conclusions: Laser irradiation, with or without applying five percent sodium fluoride, was not capable of increasing the enamel white spot lesions' acid resistance.

Little is known about the ontogeny of the cytokines in saliva of newborn. Previous studies showed that levels of immunoglobulin A (IgA) in saliva could be influenced by prematurity. So, the aim of this study was to analyze the levels of interleukin 6 (IL-6), interleukin 10 (IL-10), interleukin 12 (IL-12), and interferon gamma (IFN-γ) in sample saliva of fullterm (FT) and preterm (PT) neonates at birth (T0) and after 3 months of age (T3). Saliva from 50 infants (25 FT and 25 PT) were collected at T0 and T3 and analyzed by Luminex Corporation (Austin, Texas, United States) multiplex assay. Clinical characteristics and social-economic data were assessed through questionnaires. All cytokines could be detected at birth in levels higher than found in T3. The mean levels and frequency of detection of cytokines were significantly higher in PT than FT at T0 (P<0.05). There were a positive association between IL-10 and infection (P<0.05) and IL-6 and stress (P<0.005). Salivary cytokines were detected within the first hours after birth and their levels decreased after 3 months. The cytokine levels were different between PT and FT children and appear to be influenced by stress situation and/or antigenic microbial challenge. The results confirm the necessity for further studies about the mucosal immune system by using of saliva as a source of diagnostic by identification of biomarkers of the status of the immune., (Copyright © 2014 Elsevier GmbH. All rights reserved.)

Unlabelled: The use of erbium lasers to prevent caries in enamel has shown positive results. However, it is not known if Er,Cr:YSGG laser can also be used to increase acid resistance of root dentine, which is another dental tissue susceptible to the action of cariogenic bacteria., Objective: To analyze the effects of the Er,Cr:YSGG laser (λ=2.78 μm, 20 Hz) irradiation associated with 2% neutral sodium fluoride (NaF) to prevent root dentin demineralization., Material and Methods: One hundred human root dentin samples were divided into 10 groups (G) and treated as follows: G1: no treatment; G2: NaF; G3: laser (4.64 J/cm2) with water cooling (WC=5.4 mL/min); G4: laser (4.64 J/cm2) without WC; G5: laser (8.92 J/cm2) with WC; G6: laser (8.92 J/cm2) without WC; G7: laser (4.64 J/cm2) with WC and NaF; G8: laser (4.64 J/cm2) without WC and NaF; G9: laser (8.92 J/cm2) with WC and NaF; G10: laser (8.92 J/cm2) without WC and NaF. The NaF gel was applied alone or after 4 min of irradiation. After 14 days of acid challenge, the samples were sectioned and the Knoop microhardness (KHN) test was done at different depths (30, 60, 90 and 120 μm) from the outer dentin surface. Data were analyzed by one-way ANOVA and Fisher's test (α=5%)., Results: The results showed that G8 and G10 presented higher KHN than the G1 for the depths of 30 and 60 μm, indicating an increase of the acid resistance of the dentin in up to 35% (p<0.05)., Conclusions: The use of Er,Cr:YSGG laser irradiation at 4.64 J/ cm2 and 8.92 J/cm2 without water cooling and associated with 2% NaF can increase the acid resistance of human root dentin.

Context: The knowledge of the reasons for the placement of direct restorations makes possible to trace an epidemiological profile of a specific population and to direct the teaching of dentistry to techniques that are commonly used today and will be continued performed in the future., Purpose: The aim of this study was to verify the reasons for placement and replacement of direct restorations in patients treated in the Dental Clinic of the Uberaba University - Brazil., Materials and Methods: This study evaluated 306 restorative procedures carried out on 60 patients. During the treatment planning, a form that contained information about the patient's gender, tooth number, the classification of restorations, the reasons for placement and replacement of amalgam and tooth-colored restorations, the material that had to be removed and the new material used to fill the cavities was filled for each patient. Statistical analysis was carried out using Chi-square test (α = 0.05)., Results: The data showed that most of the patients were female (66.7%). Of all the restorations placed, 60.45% were 1(st)-time placements, while 39.55% were replacements. For 1(st)-time restorations, the main reason for placement was primary caries (76.76%), followed by non-carious cervical lesions (15.14%). The amalgam restorations were replaced more frequently (67.77%). The primary reason for replacements was the presence of secondary caries (for both previous amalgam (42.68%) and composite (66.67%) restorations (P < 0.05). The resin composite was the most indicated material for the new restorations (98.04%) (P < 0.05)., Conclusions: The main reason for placement of direct restorations was primary caries, while secondary caries was the main reason for replacements. In almost all cases, the material used to fill the cavities was the resin composite.

The objective of this study was to evaluate the effects of chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation on the acid resistance of dental enamel. Forty human enamel samples were divided into four groups. They were manually irradiated with an Er,Cr:YSGG laser device (λ = 2.78 µm, 20 Hz, 20 s), in a scanning mode, with and without water cooling, according to the following parameters: Group 1: 0.25 W, 62.5 J/cm(2), no water cooling; group 2: 0.25 W, 62.5 J/cm(2), 5.0 ml/min; group 3: 0.5 W, 125 J/cm(2), no water cooling; group 4: 0.5 W, 125 J/cm(2), 5.0 ml/min. No airflow was used. Afterwards, the samples were submitted to an acid challenge and assessed by cross-sectional Knoop microhardness at different depths (20, 40, 60, 80, and 100 µm) from the outer enamel surface. Average values were obtained for both irradiated and control areas in each sample and they were compared to obtain a percentage of microhardness increase. Data were analyzed by analysis of variance and Fisher's exact test (α = 5%). The percentage of microhardness increase observed in group 1 (+23.58%) was similar to group 3 (+19.12%), but higher than groups 2 (+3.61%) and 4 (10.9%) (p < 0.05). The comparison of the depths showed that the Er,Cr:YSGG laser acted in the superficial layers of the dental enamel. The findings of the present study suggest that the energy densities of 62.5 and 125 J/cm(2) were capable of increasing the acid resistance of human enamel. The presence of water during irradiation makes it difficult to obtain an enamel surface more resistant to acids.

In this study we compared the microleakage of conventional glass ionomer cement (GIC) restorations following the use of different methods of root caries removal. In vitro root caries were induced in 75 human root dentin samples that were divided in five groups of 15 each according to the method used for caries removal: in group 1 spherical carbide burs at low speed were used, in group 2 a hand-held excavator was used, and in groups 3 to 5 an Er,Cr:YSGG laser was used at 2.25 W, 40.18 J/cm(2) (group 3), 2.50 W, 44.64 J/cm(2) (group 4) and 2.75 W, 49.11 J/cm(2) (group 5). The air/water cooling during irradiation was set to 55%/65% respectively. All cavities were filled with GIC. Five samples from each group were evaluated by scanning electron microscopy (SEM) and the other ten samples were thermocycled and submitted to a microleakage test. The data obtained were compared by ANOVA followed by Fisher's test (p≤0.05). Group 4 showed the lowest microleakage index (56.65 6.30; p<0.05). There were no significant differences among the other groups. On SEM images samples of groups 1 and 2 showed a more regular interface than the irradiated samples. Demineralized dentin below the restoration was observed, that was probably affected dentin. Group 4 showed the lowest microleakage values compared to the other experimental groups, so under the conditions of the present study the method that provided the lowest microleakage was the Er,Cr:YSGG laser with a power output of 2.5 W yielding an energy density of 44.64 J/cm(2).

The aim of this in vitro study was to evaluate some parameters of dental etching when irradiated with an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser. One-hundred sound human third molars were selected and randomly distributed into ten groups (n = 10). The class V cavities of group 1 (control) were prepared with a bur and etched with 37% phosphoric acid, while groups G2 to G10, were prepared with laser (5 W, 88.46 J/cm(2), 90/70% air/water) and etched with the following powers: G3 and G4, 0.25 W; G5 and G6, 0.5 W; G7 and G8, 0.75 W; G9 and G10, 1 W. Group G2 received no laser etching. Prior to restoration, G2, G4, G6, G8 and G10 received acid etching. After restoration, all samples were submitted to a microleakage test. According to statistical analysis (Kruskal-Wallis and Dunn's tests), G10 presented the lowest microleakage values (P<0.05). The other groups showed no differences between them. Etching with Er,Cr:YSGG laser (1 W) followed by phosphoric acid was effective in reducing the microleakage of class V restorations.

Objective: This study aimed to analyze in vitro inhibitory effects of restorative materials containing the antibacterial monomer 12-methacryloyloxydodecylpyridinium bromide (MDPB) on the formation of artificial secondary root caries lesions., Methods: Class V cavities (2mmx2mm) were prepared in 75 human root fragments. Specimens were randomly divided into five groups (n=15 fragments per group) and restored as follows: (I) MDPB-free adhesive system+MDPB-free composite (negative control); (II) resin modified glass ionomer (RM-GIC; positive control); (III) MDPB-free adhesive system+MDPB-containing composite (2.83% MDPB); (IV) MDPB-containing adhesive system+MDPB-free composite; (V) MDPB-containing adhesive system+MDPB-containing composite. Artificial secondary root caries lesions were produced by a biological artificial caries challenge. The restored specimens were immersed into a culture medium containing Streptococcus mutans and sucrose for 15 days. Histological slices (80+/-20 microm) of the specimens were used for measuring the mean depths of the artificial lesions produced in both margins of the restorations using polarized light microscopy. Results were expressed in percentage related to the mean depth of the negative control, considered 100%. Data were compared by ANOVA followed by the Tukey's test (p< or =0.05)., Results: The depths of lesions adjacent to cavities filled with RM-GIC (GII; 85.17+/-15.2%) were significantly (p<0.01) shallower than those adjacent to restorations with MDPB-free composite (GI; 100.00+/-10.04%), despite the presence of MDPB in the adhesive system (GIV; 101.95+/-21.32%). The depths of lesions adjacent to cavities restored with MDPB-containing composite (GIII; 82.68+/-12.81% and GV; 85.65+/-15.42%), despite the adhesive system used, were similar to those of RM-GIC (GII). Mean lesions depths in these groups decreased from 13% (GV) to 17% (GIII) in relation to the negative control (GI)., Conclusions: MDPB-containing composite inhibits the progression of artificial secondary root caries lesions regardless of adhesive systems.

Little is known about the physiological mechanisms related to low-intensity laser therapy (LILT), particularly in acute inflammation and subsequent wound healing. The objective of this study was to verify the effect of LILT on mast cell degranulation. Epulis fissuratum tissues from eight patients were used. One part of the lesion was irradiated with an AsGaAl laser (lambda = 670 nm, 8.0 J/cm(2), 5 mW, 4 min). The other part was not irradiated. Then, the specimens were immediately removed, fixed and examined by light microscopy. The number of mast cells was similar in laser-treated samples when compared with non-irradiated specimens. The degranulation indexes of the mast cells observed in the irradiated samples were significantly higher than those of controls (P < 0.05). LILT with the parameters used increased the number of degranulated mast cells in oral mucosa.

Aim: The aim of this study was to evaluate the influence of chlorhexidine on microleakage of composite restorations in class V cavities prepared with a carbide bur (CB) and a erbium:yttrium-aluminum-garnet (Er:YAG) laser., Methods and Materials: Cavity preparations were created on the buccal surfaces of 48 bovine incisors using different methods then equally dividing them into four groups. Groups I and II were prepared with a #56 CB in a high speed handpiece while Groups III and IV were prepared with a Er:YAG laser at 350m J/4Hz on enamel and at 80.24 J/cm2 on dentin. The cavity preparations were rinsed with 2% chlorhexidine solution before the application of Clearfill SE Bond system and placement of a Z100 composite resin restoration. After 24 hours, the teeth were polished, thermocycled, and sealed with cosmetic varnish. The samples were then immersed in 2% methylene blue for four hours and sectioned in the buccolingual direction to determine the degree of microleakage., Results: After statistical analysis (Kruskal-Wallis, p<0.05), no significant differences were verified among the tested groups and between the evaluated cervical or incisal margins of the restoration., Conclusion: The use of the chlorhexidine did not interfere with the adhesion process regardless of whether a CB or the Er:YAG laser were used to prepare class V cavities when restored with the tested self-etching adhesive system.

Objective: This investigation evaluated the variation of the intrapulpal temperature when dentine was irradiated by the Er:YAG laser., Background Data: The effect of preparation with the Er:YAG laser on the intrapulpal temperature is probably the biggest problem in using the laser for preparation of dental hard tissue., Materials and Methods: Seventy-two bovine incisors were studied that had the enamel and dentine of the buccal surface polished to a thickness of 2.0 mm. The teeth were divided into three groups, according to the repetition rate used (Group I = 2 Hz, Group II = 4 Hz, and Group III = 6 Hz), and irradiated, with or without water cooling, using 250, 300, and 350 mJ of energy per pulse. Thermocouples were introduced inside the pulp chamber through the palatine opening of the samples and fixed to the vestibular wall of the pulp chamber using a thermal paste., Results: It was verified that there was a decrease of the intrapulpal temperature for all of the parameters in the Group I irradiated with water cooling and for the parameters of 350 mJ/4 Hz with water cooling. The other irradiations showed an increase of the intrapulpal temperature, varying from 0.03 degrees to 2.5 degrees C., Conclusion: We conclude that the use of the Er:YAG laser promoted acceptable temperature increases inside the pulp chamber. However, we do not recommend this procedure without water cooling because macroscopic observations of the dentine irradiated without water cooling showed dark lesions, suggesting carbonization of this tissue.