Search

Obstructive sleep apnea (OSA) is a clinical syndrome characterized by periodic reduction (hypopnea) or cessation (apnea) of airflow through the nose/mouth during sleep due to collapse of the upper respiratory tract lasting 10 seconds or more. Severe snoring, hypoxemia and micro-awakenings occur, leading to sleep fragmentation, daytime fatigue and drowsiness. One of the key factors for the development of OSA is obesity. Excessive alcohol consumption, smoking, and presence of relatives with sleep apnea are risk-increasing factors. The gold standard in diagnosis is polysomnographic examination.Various values and indices are monitored, the most important of which is the apnea/hypopnea index. Treatment includes control of risk factors and removal of breathing obstacles. In patients with more severe obstructive sleep apnea syndrome, the gold standard of treatment remains constant positive pressure ventilation during sleep. Water sports have been part of programs for prevention of breathing disorders during sleep for many years. Our goal is to confirm whether after active sea treatment, water sports and weight loss of patients symptoms of obstructive sleep apnea and snoring would be favorably affected, as well as to actively promote and educate our patients about a more active sports (and aquatic) life. Results from our studies on patients with problems with the upper respiratory tract and OSA show that more than half did not practice sport. Some have common diseases, incl. allergic conditions. The influence of bad habits and the hereditary factor were confirmed as well. Obstructive sleep apnea and snoring syndrome is a serious disease with consequences for patients and other people. Screening of at-risk patients should be continued and studies should be conducted on the effectiveness of current and new methods for diagnosing and treating the syndrome.

Using the retrieved devices from one autopsy and five reoperations, the biocompatibility of explanted Talent stent-grafts was investigated to highlight the capacity of the fabric to act as an effective scaffold to regenerate a blood conduit. The autopsy device was encapsulated both internally and externally, but the capsules did not penetrate through the fabric structure. The reoperation devices showed discrete patches of compact fibrin and irregularly scattered mural thrombi. Positive staining of α-actin, tissue plasminogen activator (tPA), urokinase (uPA), urokinase receptor (uPAR), and urokinase inhibitors (PAI 1, PAI 2, PAI 3, and protease nexin), and D-dimer was more frequently identified in the autopsy sample than in the reoperation samples. This preliminary assessment shows that the stent-graft retrieved during autopsy was better healed than those explanted at reoperation.

Twenty-nine modular stent-grafts deployed transrenally to repair AAAs with short necks in dogs were harvested at autopsy of the animals after scheduled durations of implantations of 10 days, one month, three months, and six months. Analyses of the explanted devices included non-destructive techniques such as gross observations, X-rays CT scan, IVUS and angioscopy. Further to appropriate dissection, histological investigations were carried out by means of scanning electron microscopy (SEM) and light microscopy. All the 29 specimens were extensively encapsulated with fibrous tissues but the fibrous capsule was thin in six of them; four capsules were ulcerated. The X-rays confirmed the stability of the devices that were still straight (12), slightly bent (12) or bent (4). The modules were misaligned in only one case. IVUS and angioscopy confirmed the patency of all the stent-grafts with thin internal capsules both proximally and distally with variable capsulation in the mid-section of the grafts. The left renal artery orifices were found to be patent at dissection with no obstruction to flow. The luminal flow surface of the stent-grafts was smooth and glistening proximally and distally containing endothelial like cells and vasa-vasorum. Poor healing was noted in the aneurysm area. Transrenal deployment of this modular stent-graft is feasible and gave excellent results with regard to biofunctionality and biocompatibility. The device proved to be safe and efficient.

A patient was fitted with an Anaconda stent graft for which there was a persistent type II endoleak. Two subsequent attempts at embolization were unable to resolve the endoleak. The diameter of the aneurysm varied initially from 5.5 cm in diameter down to 4.8 cm but then later re-dilated to 6.1 cm, with evidence of persistent flow into the aneurysmal sac from the inferior mesenteric artery. Results from serial computed tomography scans demonstrated clear evidence of a type II endoleak that originated from the inferior mesenteric artery with outflow to a distal lumbar artery. The harvested stent graft did not show evidence of a device-related failure. The stent graft and its modular segments were found to have been properly deployed. Only a thin external capsule was evident at explantation. The internal wall of the device showed irregular and thin encapsulation with scattered mural thrombi, which were more prominent at the bifurcation of the main body of the device. Blood deposits and tissue development were sufficient to prevent blood oozing through the wall. The explanted Anaconda stent graft was devoid of any construction flaws or damage (fatigue of the textile or corrosion of the Nitinol wires) after implantation.

Rationale: Prosthetic heart valves designed to be implanted percutaneously must be loaded within delivery catheters whose diameter can be as low as 18 F (6 mm). This mandatory crimping of the devices may result in deleterious damages to the tissues used for valve manufacturing. As bovine and porcine pericardial tissue are currently given preference because of their excellent availability and traceability, a preliminary comparative study was undertaken to highlight their potential advantages. Materials and methods: Bovine and pericardium patches were compared morphologically (light microscopy, scanning electron microscopy and transmission electron microscopy). The acute thrombogenicity of both materials was measured in term of platelet uptake and observed by scanning electron microscopy, porcine intact and injured arteries being used as controls. The pericardium specimens were also subjected to uniaxial tensile tests to compare their respective mechanical characteristics. Results: Both pericardiums showed a layered architecture of collagen bundles presenting some interstitial cells. They displayed wavy crimps typical of an unloaded collagenous tissue. The collagen bundles were not bound together and the fibrils were parallel with characteristic periodicity patterns of cross striations. The mesothelial cells found in vivo on the serous surface were no longer present due to tissue processing, but the adjacent structure was far more compacted when compared to the fibrous side. The fibrinocollagenous surfaces were found to be more thrombogenic for both bovine and porcine tissues and the serous side of the porcine pericardium retained more platelets when compared to the bovine samples, making the acute thrombogenicity more important in the porcine pericardium. Conclusion: Both bovine and porcine pericardium used in cardiovascular implantology can be selected to manufacture percutaneous heart valves. The selection of one pericardium preferably to the other should deserve additional testing regarding the innocuousness of crimping when loaded in delivery catheters and the long-term durability after percutaneous deployment.

Further to the rapid enlargement of an aneurysm to 5.6 cm in diameter after 3 years of surveillance, a 79-year-old patient was fitted with a Vanguard modular stent graft and monitored on a regular basis for 6 years. Two years later, the aneurysmal sac ruptured. The patient died 1 month after an open surgery. The device was devoid of any encapsulation and the ipsilateral limb was detached from the body. The Nitinol skeleton was mostly maintained, however, some polypropylene sutures were broken. The resulting motion of the sharp-angled Nitinol wires caused abrasion and resulted in a few localized holes that were sufficient to permit blood to percolate through the textile wall. Some polyester yarns in the warp direction were ruptured. The Nitinol wire used in this device was shown to be corrosion resistant but the selection of the polypropylene suture was inappropriate. Because this technology is maturing rapidly, these weaknesses can be avoided in the future generations of endovascular devices. It is recommended that these Nitinol wires be sutured to the fabric and that polyester yarns stronger than 68 decitex in tubes 8 mm in diameter are selected.

Sixty-two explanted Liotta porcine bioprostheses were examined to review the issues related to their biocompatibility, biofunctionality, and biodurability. These bioprostheses were harvested from 56 patients with implantation times ranging from only a few hours to more than nine years of implantation. There were 10 acute and short-term (1 year), 20 midterm (1t5 years), and 32 long-term (5 years) cases. The indications for the reoperations were: hemodynamic (59), thrombosis (10), and endocarditis (3). The major indications varied according to the duration of implantation: blood infiltration, fibrin buildup, thrombosis in the short-term; endocarditis and hemodynamic insufficiency in the midterm; and mineralization and tears causing hemodynamic incompetence in the long term. Mineralization proved to be the main threat to long-term durability for porcine valves. Besides a few short-term failures, these explanted devices slowly degenerated over time and were replaced to prevent congestive heart failure. Documentation of the failure modes of these porcine valves is important since the demand for bioprostheses will increase in the future, in particular for percutaneous devices. Such bioprostheses emphasize a critical biocompatibility issue following implantation because they have the capacity to remain free of thrombus in the absence of anticoagulation. The biofunctionality appears to be adequate in the absence of subsequent pathology with restoration of normal valve function. However, the documentation of such significant long-term biodurability issues raises questions that have been addressed but not fully answered yet with the new generations of bioprostheses.

Numerous endovascular stent grafts to treat intrarenal aortic aneurysms are now commercially available, and many new concepts are currently in development worldwide. In order to objectively quantify their outcomes, we propose a detailed protocol to examine a reference device that was harvested from a patient who died a few hours after endovascular stent-graft deployment for an abdominal aortic aneurysm according to the 3Bs rule (biocompatibility, biofunctionality, and biodurability). Relevant patient history of this 63-year-old man included radiotherapy treatment for lung cancer. Following the patient's death, the device was harvested en bloc together with the aneurysmal sac. The analysis of the device was conducted using nondestructive testing (X-rays, CT scan, magnetic resonance imaging [MRI], and endoscopy) and destructive testing (dissection, histology, and fabric and wire component analyses). Results from the gross examination demonstrated that the outer layer of the aneurysm sac was white, stiff, and continuous without any disruption. The Xray analysis, CT scan, and MRI confirmed that the device together with its modular segments was properly deployed at implantation. Endoscopy showed that the device was deployed securely immediately distal to the renal arteries. As anticipated, thin scattered mural thrombi at the blood/foreign material interface were observed on the blood tight flow surface. There were no tears in the fabric, and the dimensions and textile structure were well preserved. The metallic wires were intact. This fatality had no association with the stent graft as the patient's death was caused by the rupture of the pulmonary artery following intensive radiotherapy. In conclusion, autopsy, nondestructive testing, and destructive testing are therefore the necessary steps to validate any explanted endovascular stent graft in terms of biocompatibility, biofunctionality, and biodurability. In this specific case, the endovascular device fulfills the 3Bs rule. The authors recommend this protocol to investigate explanted endovascular devices.

International audience; Severely angulated (> 60°) or short (< 15mm) proximal necks remain significant anatomical limitations for endovascular stent-graft repairs for abdominal aortic aneurysms. Ensuring proper proximal fixation of the stent-graft to the host artery without the short-or long-term risks of endoleak or migration represents a particular technical challenge for these anatomical circumstances. An innovative balloon expandable stent combined with a weft-knitted prosthesis was specifically designed for these situations by modelling the stent to the neck anatomy without overdistension or potential barotrauma allowing better incorporation of the device. The Latecba stent-graft consists of a 2 parts modular design. The first one, Module A, is deployed at the transrenal level and consists of a Palmaz type stent whose first half is bare and second half is sutured to a crimped weft-knitted polyester graft whose distal end holds a constriction. The second Module B is a non-crimped weft-knitted graft attached to 2 stainless steel stents. The first stent is entirely contained in the proximal textile tube, allowing fixation to module A. The second stent, which is left uncovered over the distal third, ensures proper fixation of the stent-graft distally. Following the creation of a prosthetic aneurysm in the infrarenal aorta in 32 dogs, 29 received the Latecba stent-graft for scheduled durations of 10 days, 1 month, 3 months and 6 months. Proper deployment of the stent-grafts was achieved without difficulty. All 29 animals survived and the devices were all patent at sacrifice. No device defects or migrations were observed and the stent-grafts proved to be efficient in this setting to exclude the aneurysm. Analyses of the explanted devices (gross observations, RX, CT scan, IVUS, angioscopy) confirmed the stability of this modular stent-graft. Further on-going clinical investigations are warranted to validate this concept before this stent-graft becomes commercially available without any restriction.

The arterial wall viscoelasticity plays an essential role in the vascular responsiveness to vasoactive drugs or pathologies. The aim of this investigation was to derive and compare resonance curve (RC), natural frequency (f(0)), dynamic modulus of elasticity (E'), and coefficient of viscosity (beta) of (i) vital and devitalized preparations of rat thoracic and abdominal aorta, (ii) human arterial prostheses, and to study the histomorphology of vital and devitalized rat aorta. The method of low frequency forced oscillations was employed. RC of vital preparations showed a hardening type of elasticity whereas in devitalized preparations it was of softening type. E' increased nonlinearly, f(0) decreased and beta increased linearly with equivalent intraluminal pressure (p(eqi)). Distensibility of abdominal aorta was lower than thoracic aorta. Distensibility decreased with increasing p(eqi). E', f(0), and beta increased significantly after devitalization. It was suggested that postmortem viscoelastic characteristics should not be used directly to specify the vital arteries viscoelasticity. RC of human prostheses showed a softening type of elasticity. Arterial prostheses have low circumferential distensibility with E'-values higher than reported in the literature for human arteries. The method of forced oscillations could be employed for studying the arterial wall biomechanics and viscoelasticity of arterial prostheses.

International audience; Problems of displacement, poor healing, degradation of the polymers and corrosion of the metallic frame in endovascular devices still require in-depth investigations. As the tissues and the foreign materials are in close contact, it is of paramount importance to efficiently investigate the interfaces between them. Inclusion in polymethymethacrylate (PMMA) permits us to obtain thin slides and preserve the capacity to perform the appropriate stainings. An AneuRx prosthesis was harvested in bloc with the surrounding tissues at the autopsy of a patient 25 months post deployment in a 5.7 cm diameter AAA and sectioned in the direction of the blood flow in two halves. A cross-section of the encapsulated distal segment together with the surrounding aneuryshmal sac was embedded in polymethylmethacrylate (PMMA). Further to complete polymerization, slices of the specimen were cut on a precision banding saw under coolant. They were affixed onto methacrylate slides with a UV cured adhesive. Binding and polishing were done on a numeric grinder and slices 25 to 30 µm in thickness were stained with toluidine blue prior to observation in light microscopy. Additional slices were prepared for scanning electron microscopy and X-ray energy dispersive spectrometry for determination of the elemental composition of the Nitinol stent. The aortic wall did not demonstrate complete integrity along with its circumference. Some areas of rupture were noted. The content of the sac was heavily shrunk and was mostly acellular. The walls of the device were very well encapsulated. The PMMA embedding permitted the polyester wall, the Nitinol wire and the collagen to keep in close contact. Scanning electron microscopy involved backscattered electrons and confirmed the corrosion the Nitinol wire at the boundary with living tissues. Based upon the results obtained, we believe that PMMA embedding is the most appropriate method to process endovascular devices for histological and material investigation. Needless to say, that paraffin embedding would have not been feasible for such a big size specimen involving different materials.

PURPOSE To validate the deployment, in vivo performance, biostability, and healing capacity of the Anaconda self-expanding endoprosthesis in a canine aortic aneurysm model. METHODS Aneurysms were surgically created in 12 dogs by sewing a woven polyester patch onto the anterior side of the thoracic or abdominal aorta. Anaconda prostheses were implanted transfemorally for prescheduled periods (1 or 3 months). Aneurysm exclusion and stent-graft patency were monitored angiographically. Healing was assessed with histological analysis and scanning electron microscopy (SEM). Textile analysis determined the physical and chemical stability of the woven polyester material, while the biostability of the nitinol wires was evaluated with SEM and spectroscopy. RESULTS All prostheses were intact at explantation. After 1 month, endothelial-like cells were migrating in a discontinuous manner both proximally and distally over the internal collagenous pannus at the device-host boundary. After 3 months, endothelialization had reached the midsections of the devices, with a thicker collagenous internal capsule. Patches of endothelial-like cells were sharing the luminal surface with thrombotic deposits. However, the wall of the device at the level of the aneurysm was generally poorly healed, with multiple thrombi scattered irregularly over the luminal surface. The polyester fabric was intact except for some filaments that were ruptured adjacent to the sutures and some abrasion caused by the nitinol wires. No evidence of corrosion was found on the nitinol stents. CONCLUSIONS This Anaconda stent-graft has demonstrated its ability to exclude arterial aneurysms. The device used in this study was an experimental prototype, and the manufacturer has incorporated new immobilization features into the model for clinical use. The constituent materials appear to be suitable in terms of biocompatibility, biofunctionality, and short-term durability.

International audience; The formation of a fibrous capsule made of long collagen fibers surrounding breast implants represents an unavoidable phenomenon as the patients reaction to the presence of a foreign body. Depending upon the size and shape of the implants and the chemicals percolating through the shell, this fibrous capsule is continuously remodeled. The compaction of the foreign debris in the vicinity of the silicone shell is followed by the loss of cellular activity, shrinkage and necrosis. Calcification is the ultimate step. These phenomena were illustrated in the analysis of 18 explanted breast prostheses after 20 or more years of implantation. The degenerative mineralization was shown in scanning electron microscopy and light microscopy. The minerals proved to be bone-like hydroxyapatite by X-ray diffraction and Solid State NMR analysis. Whatever the characteristics of any sophisticated new model of breast implant, phenomenon of mineralization might be minimized but it is very unlikely that it would be totally eliminated.