Search

In this paper the problem of improving techniques for rainfall intensity estimation over the sea surface through spaceborne rain radars is analysed. In such case, the backscattered signal is composed of a rainfall volumetric contribution and of the sea surface contribution, which gives rise to the problem of extracting the information of interest from the composite echo. In particular, we focus on the problem of deriving a better estimation of the rain perturbed backscattering coefficient of the sea surface from polarimetric measurements, as a means for achieving such improvements. The effects of the additional roughness of the sea surface due to the rainfall have been taken into account and analysed by resorting to an electromagnetic model able to provide a full polarimetric description of the rainfall perturbed sea surface.

Objectives: The following study proposes and tests an integrated methodology involving Health Technology Assessment (HTA) and Failure Modes, Effects and Criticality Analysis (FMECA) for the assessment of specific aspects related to robotic surgery involving safety, process and technology., Methods: The integrated methodology consists of the application of specific techniques coming from the HTA joined to the aid of the most typical models from reliability engineering such as FMEA/FMECA. The study has also included in-site data collection and interviews to medical personnel., Results: The total number of robotic procedures included in the analysis was 44: 28 for urology and 16 for general surgery. The main outcomes refer to the comparative evaluation between robotic, laparoscopic and open surgery. Risk analysis and mitigation interventions come from FMECA application., Conclusions: The small sample size available for the study represents an important bias, especially for the clinical outcomes reliability. Despite this, the study seems to confirm the better trend for robotics' surgical times with comparison to the open technique as well as confirming the robotics' clinical benefits in urology. More complex situation is observed for general surgery, where robotics' clinical benefits directly measured are the lowest blood transfusion rate.

Background: The management and the monitoring of the operating rooms on the part of the general management have the objective of optimizing their use and maximizing the internal safety. The expenses owed to their safe use represent, besides reimbursements coming from the surgical activity, important factors for the analysis of the medical facility., Objective: Given that it is not possible to reduce the safety, it is necessary to develop supporting systems with the aim to enhance and optimize the use of the rooms., Methods: The developed analysis model of the operating rooms in this study is based on the specific performance indicators and allows the effective monitoring of both the parameters that influence the safety (environmental, microbiological parameters) and those that influence the efficiency of the usage (employment rate, delays, necessary formalities, etc.). This allows you to have a systematic dashboard on hand for all of the OTs and, thus, organize the intervention schedules and more appropriate improvements., Results: A monitoring dashboard has been achieved, accessible from any platform and any device, capable of aggregating hospital information. The undertaken organizational modifications, through the use of the dashboard, have allowed for an average annual savings of 29.52 minutes per intervention and increase the use of the ORs of 5%. The increment of the employment rate and the optimization of the operating room have allowed for savings of around $299,88 for every intervention carried out in 2013, corresponding to an annual savings of $343,362,60., Conclusions: Integration dashboards, as the one proposed in this study as a prototype, represent a governance model of economically sustainable healthcare systems capable of guiding the hospital management in the choices and in the implementation of the most efficient organizational modifications.

Background: This paper reports the development of standard techniques for technology evaluation in hospital carried out at the Florence Teaching Hospital Careggi (AOUC), where, as a complex system, the technological evaluation is a strategic and essential element for the maintenance of high-quality clinical activity and maximization of available resources., Objective: The aim of this paper has been the development of a system of economically sustainable models for the implementation of HTA and HS analyses in the hospital environment as well as presenting, in addition to a valid scientific resilience, the methodological and temporary flexibility to satisfy needs of hospital decision-makers., Methods: The evaluation models call for 3 main phases: an initial analysis of the in-hospital request, a collection of data, and finally a draft of a specific, easily usable set of reports., Results: Three standardized and tested models of evaluation were developed, which, in relation to the objective of the request and schedule of the assignment, provide for the production of a speedy report (1-week), an intermediate report (1-month), or a extensive report typical of classical studies of hospital based HTA (1-year). It is then related to the evaluation model of the IORT (Intra-Operative Radiation Therapy) technology., Discussions and Conclusion: The developed models have permitted the construction, using personnel and laboratories within the hospital, of an evaluation system reliable and responsive to the HOSPITAL's temporary needs based on the HS and HTA analyses in the hospital environment. Regarding the applicable case of IORT, this has shown how in-hospital requests have been satisfied in the preset time: although it establishes expected improvements on the social effect and weight of the illness and reveals a high territorial strategic relevance, the introduction of IORT in the hospital presents some criticalities on the impact on the healthcare organization and the necessity of specific training of medical technologist personnel.

Background: This study, carried out at the Florence Teaching Hospital Careggi (AOUC), reports the technological evaluation, through the use of Health Technology Assessment (HTA), on the application of mitral clips in the treatment of mitral insufficiency., Objective: The assessment, carried out by analyzing the clinical, technological, social, procedural, safety and economic elements, sought to answer the following research questions: Evaluation of the general technological status of the mitral clips in the treatment process of mitral regurgitation, with particular reference to traditional methods; and contextualisation of the analyses within the hospital structure, by identifying criticality issues and improvements., Methods: The methodology was based on the following steps: technological description; areas of evaluation and the selection of Key Performance Indicators; research of scientific facts and the collection of expert opinions; evaluation and reporting of findings., Results: The results are based on an analysis which included a total of 50 indicators, effectively evaluating 86.5% of them, from the least from the clinical sector (80%) to the most in the areas of procedure, safety and social (100%). Traditional surgery (repair or valve replacement) still represents the gold standard for the treatment of mitral regurgitation due to its maturity both on a technological and clinical level. The minimally invasive procedures which use the mitral clips present interesting opportunities both on a social level (minimum stay in hospital and no post-operative rehabilitation) and clinical level, especially as an alternative to medication, even if they are still at an emergent level (the long-term results are unknown) and complex to use. From the clinical point of view they show some interesting findings related to immediate and post-operative mortality (none during the operation and a minor and equal amount 30 days and 12 months later in comparison to traditional methods) whilst economically, despite the fact that the cost of the device is greater than those used in traditional interventions, the cost-refund relationship does not show significant differences compared to the traditional types of treatment., Conclusion: The HTA evaluation of minimally invasive technologies that use clips for the treatment of mitral regurgitation shows, in the hospital setting, very interesting results, particularly for inoperable patients, where the clinical and social improvements are significant compared to pharmacological treatments, whilst for 'operable' patients, the traditional techniques are still the most appropriate.

The appropriate maintenance of medical devices, including performance inspections and preventive maintenance, is fundamental in mitigating clinical risk caused by adverse events in health care. Although several models for managing and planning preventive maintenance have been developed, the problem is lacking in standard methodology and still presents an open challenge for today's health experts. This paper aims to provide and develop methodology together with support systems able to assist decision makers in constructing preventive maintenance and performance inspection plans, taking into account both the technical and economic needs of hospital clinical engineering departments. Interventions by decision makers are of crucial importance within complex situations where large numbers, types of devices and different contractual situations are involved. SISMA system has achieved optimal results with minimum expense and maximum security for patients and technicians at the University Hospital of Florence where it has been applied in actual case studies.

Technology management in healthcare must continually respond and adapt itself to new improvements in medical equipment. Multidisciplinary approaches which consider the interaction of different technologies, their use and user skills, are necessary in order to improve safety and quality. An easy and sustainable methodology is vital to Clinical Engineering (CE) services in healthcare organizations in order to define criteria regarding technology acquisition and replacement. This article underlines the critical aspects of technology management in hospitals by providing appropriate indicators for benchmarking CE services exclusively referring to the maintenance database from the CE department at the Careggi Hospital in Florence, Italy.

We present a new coaxial antenna for microwave interstitial coagulative therapy, working at 2450 MHz and endowed with a miniaturized sleeve choke in order to reduce back heating effects and make the system response less dependent on the antenna insertion depth into the tissue; the way the choke is implemented makes the overall transversal size minimum and allows small adjustments of the choke section length even during operation. We describe the main technical features of the antenna and show experimental results clearly proving the choke effectiveness. Numerical simulations well agree with experimental data, confirming the suitability of the proposed device for minimally invasive medical applications.

A simple microwave technique for in vivo monitoring of human pulmonary and cardiac activity is here presented. The technique is based on detecting the changes in the modulation envelope of amplitude modulated waves passing through the human body. A simplified human chest model was developed, proving an unambiguous correlation between heart blood filling and microwave transmission through the chest. A prototype system for transmittance measurement was realized at the 868.5-MHz operating frequency, demonstrating the feasibility of a small, lowcost microwave plethysmograph. In vivo measurements showed a good agreement with numerical simulations.

In this paper, the electromagnetic and thermal behavior of interstitial applicators was analyzed by using the Finite-Difference Time-Domain method. Two configurations were considered: a simple insulated dipole antenna radiating in a layered tissue, and an air cooled applicator radiating in a tissue-equivalent phantom. The proposed approach allows a detailed modeling of the complete structure of the applicator. Furthermore, Specific Absorption Rate and temperature distributions can be determined considering real clinical or experimental conditions. The temperature distribution for the air cooled applicator has been compared with experimental results.

A prototype of a water-cooled electromagnetic applicator for intracavitary hyperthermia has been tested. The temperature distributions produced in a polyacrylamide dissipative medium have been shown using liquid crystals. A complete electromagnetic and heat transfer model can predict the experimental temperatures.

An insulated, water-cooled dipole, radiating in a biological tissue, is analyzed with a theoretical electromagnetic and thermal model. The SAR and temperature distributions are calculated taking into account the effect of the water flowing inside the applicator. The steady-state temperatures in a dissipative medium, interacting with the dipole, are evaluated for several thicknesses of the external casing, water temperatures and blood perfusions. A correct design of the external casing thickness and a proper choice of the temperature and flow velocity of water allows to control the wall temperature of the applicator within physiological limits. The influence of the blood perfusion on the temperature distribution is investigated.