Search

Astronomers have been measuring the separations and position angles between the two components of binary stars since William Herschel began his observations in 1781. In 1970, Anton Labeyrie pioneered a method, speckle interferometry, that overcomes the usual resolution limits induced by atmospheric turbulence by taking hundreds or thousands of short exposures and reducing them in Fourier space. Our 2022 automation of speckle interferometry allowed us to use a fully robotic 1.0-meter PlaneWave Instruments telescope, located at the El Sauce Observatory in the Atacama Desert of Chile, to obtain observations of many known binaries with established orbits. The long-term objective of these observations is to establish the precision, accuracy, and limitations of this telescope's automated speckle interferometry measurements. This paper provides an early overview of the Known Binaries Project and provide example results on a small-separation (0.27") binary, WDS 12274-2843 B 228.

Investigations of the main asteroid belt and efforts to constrain that population's physical characteristics involve the daunting task of studying hundreds of thousands of small bodies. Taxonomic systems are routinely employed to study the large scale nature of the asteroid belt because they utilize common observational parameters, but asteroid taxonomies only define broadly observable properties and are not compositionally diagnostic (Tholen, 1984; Carvano et al., 2010, Hasselmann et al., 2012). This work builds upon the results of Hardersen et al. (2014, 2015), which has the goal of constraining the abundance and distribution of basaltic asteroids throughout the main asteroid belt. We report on the near infrared (NIR: 0.7 to 2.5 microns) reflectance spectra, surface mineralogical characterizations, spectral band parameter analysis, and meteorite analogs for 33 Vp asteroids. NIR reflectance spectroscopy is an effective remote sensing technique to detect most pyroxene group minerals, which are spectrally distinct with two very broad spectral absorptions at 0.9 and 1.9 microns (Cloutis et al., 1986; Gaffey et al., 2002; Burbine et al., 2009). Combined with the results from Hardersen et al. (2014, 2015), we identify basaltic asteroids for 95 percent (39 of 41) of our inner-belt Vp sample, but only 25 percent (2 of 8) of the outer-belt Vp sample. Inner belt basaltic asteroids are most likely associated with 4 Vesta and represent impact fragments ejected from previous collisions. Outer belt Vp asteroids exhibit disparate spectral, mineralogic, and meteorite analog characteristics and likely originate from diverse parent bodies. The discovery of two additional likely basaltic asteroids provides additional evidence for an outer-belt basaltic asteroid population., Comment: 32 pages, 5 figures, 4 tables

The objective of multi-use telescopes is to reduce the initial and operational costs of space telescopes to the point where a fair number of telescopes, a dozen or so, would be affordable. The basic approach is to develop a common telescope, control system, and power and communications subsystem that can be used with a wide variety of instrument payloads, i.e., imaging CCD cameras, photometers, spectrographs, etc. By having such a multi-use and multi-user telescope, a common practice for earth-based telescopes, development cost can be shared across many telescopes, and the telescopes can be produced in economical batches.

It is argued that increases in the precision of photometric measurements and the development of fully automatic photometric telescopes (APTs) now make possible the detection of Jupiter-size objects around other stars. The two most promising approaches are to monitor binary stars that have their orbital plane nearly in our line of sight and to measure the rotation periods of stars that are known to have dark companions and have very accurate values for Vsini. Differential photometry with APTs, based on a rapid comparison among a group of stars, provides a precision of 2 parts in 1000. Transits of solar-type stars by planets or brown dwarfs the size of Jupiter or Saturn will produce brightness variations of about 10 parts per 1000.

The paper presents photoelectric photometry of Lambda And never before published, obtained between February 1982 and December 1990 at 29 different observatories. Then it is combined with all other photometry available (previously published, contained in the I.A.U. Commission 27 Archives, and obtained with the Vanderbilt 16-inch automatic telescope but not yet published), to yield a 14.8-year data base. Analysis reveals a long-term cycle in mean brightness, with a full range of 0.15 m and a period of 11.4 +/- 0.4 years. Because most of the new photometry was concentrated in the 1983-1984 observing season, this one well-defined light curve is analyzed with a two-spot model. Spot A keeps a 0.04 m amplitude throughout four rotation cycles whereas the amplitude of spot B diminishes from 0.09 m down almost to 0.03 m. The spot rotation periods were 55.9 d +/- 0.6 d and 52.8 d +/- 1.0 d, respectively.

The objective of multi-use telescopes is to reduce the initial and operational costs of space telescopes to the point where a fair number of telescopes, a dozen or so, would be affordable. The basic approach is to develop a common telescope, control system, and power and communications subsystem that can be used with a wide variety of instrument payloads, i.e., imaging CCD cameras, photometers, spectrographs, etc. By having such a multi-use and multi-user telescope, a common practice for earth-based telescopes, development cost can be shared across many telescopes, and the telescopes can be produced in economical batches.

The factors limiting the precision of differential stellar photometry are reviewed. Errors due to variable atmospheric extinction can be reduced to below 0.001 mag at good sites by utilizing the speed of robotic telescopes. Existing photometric systems produce aliasing errors, which are several millimagnitudes in general but may be reduced to about a millimagnitude in special circumstances. Conventional differential photometry neglects several other important effects, which are discussed in detail. If all of these are properly handled, it appears possible to do differential photometry of variable stars with an overall precision of 0.001 mag with ground based robotic telescopes.