Search

During the late phase of HIV-1 infection, viral Gag polyproteins are targeted to the plasma membrane (PM) for assembly. Gag localization at the PM is a prerequisite for the incorporation of the envelope protein (Env) into budding particles. Gag assembly and Env incorporation are mediated by the N-terminal myristoylated matrix (MA) domain of Gag. Nonconservative mutations in the trimer interface of MA (A45E, T70R, and L75G) were found to impair Env incorporation and infectivity, leading to the hypothesis that MA trimerization is an obligatory step for Env incorporation. Conversely, Env incorporation can be rescued by a compensatory mutation in the MA trimer interface (Q63R). The impact of these MA mutations on the structure and trimerization properties of MA is not known. In this study, we employed NMR spectroscopy, X-ray crystallography, and sedimentation techniques to characterize the structure and trimerization properties of HIV-1 MA A45E, Q63R, T70R, and L75G mutant proteins. NMR data revealed that these point mutations did not alter the overall structure and folding of MA but caused minor structural perturbations in the trimer interface. Analytical ultracentrifugation data indicated that mutations had a minimal effect on the MA monomer-trimer equilibrium. The high-resolution X-ray structure of the unmyristoylated MA Q63R protein revealed hydrogen bonding between the side chains of adjacent Arg-63 and Ser-67 on neighboring MA molecules, providing the first structural evidence for an additional intermolecular interaction in the trimer interface. These findings advance our knowledge of the interplay of MA trimerization and Env incorporation into HIV-1 particles., Competing Interests: Conflict of interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Retroviruses assemble and bud from infected cells in an immature form and require proteolytic maturation for infectivity. The CA (capsid) domains of the Gag polyproteins assemble a protein lattice as a truncated sphere in the immature virion. Proteolytic cleavage of Gag induces dramatic structural rearrangements; a subset of cleaved CA subsequently assembles into the mature core, whose architecture varies among retroviruses. Murine leukemia virus (MLV) is the prototypical γ-retrovirus and serves as the basis of retroviral vectors, but the structure of the MLV CA layer is unknown. Here we have combined X-ray crystallography with cryoelectron tomography to determine the structures of immature and mature MLV CA layers within authentic viral particles. This reveals the structural changes associated with maturation, and, by comparison with HIV-1, uncovers conserved and variable features. In contrast to HIV-1, most MLV CA is used for assembly of the mature core, which adopts variable, multilayered morphologies and does not form a closed structure. Unlike in HIV-1, there is similarity between protein-protein interfaces in the immature MLV CA layer and those in the mature CA layer, and structural maturation of MLV could be achieved through domain rotations that largely maintain hexameric interactions. Nevertheless, the dramatic architectural change on maturation indicates that extensive disassembly and reassembly are required for mature core growth. The core morphology suggests that wrapping of the genome in CA sheets may be sufficient to protect the MLV ribonucleoprotein during cell entry., Competing Interests: The authors declare no conflict of interest., (Copyright © 2018 the Author(s). Published by PNAS.)

Human T-cell leukemia virus type 1 (HTLV-1) is an important cancer-causing human retrovirus that has infected approximately 15 million individuals worldwide. Many aspects of HTLV-1 replication, including virus particle structure and assembly, are poorly understood. Group-specific antigen (Gag) proteins labeled at the carboxy terminus with a fluorophore protein have been used extensively as a surrogate for fluorescence studies of retroviral assembly. How these tags affect Gag stoichiometry and particle morphology has not been reported in detail. In this study, we used an HTLV-1 Gag expression construct with the yellow fluorescence protein (YFP) fused to the carboxy-terminus as a surrogate for the HTLV-1 Gag-Pol to assess the effects of co-packaging of Gag and a Gag-YFP on virus-like particle (VLP) morphology and analyzed particles by cryogenic transmission electron microscopy (cryo-TEM). Scanning transmission electron microscopy (STEM) and fluorescence fluctuation spectroscopy (FFS) were also used to determine the Gag stoichiometry. We found that ratios of 3:1 (Gag:Gag-YFP) or greater resulted in a particle morphology indistinguishable from that of VLPs produced with the untagged HTLV-1 Gag, i.e., a mean diameter of ~113 nm and a mass of 220 MDa as determined by cryo-TEM and STEM, respectively. Furthermore, FFS analysis indicated that HTLV-1 Gag-YFP was incorporated into VLPs in a predictable manner at the 3:1 Gag:Gag-YFP ratio. Both STEM and FFS analyses found that the Gag copy number in VLPs produced with a 3:1 ratio of Gag:Gag-YFP was is in the range of 1500-2000 molecules per VLP. The observations made in this study indicate that biologically relevant Gag-Gag interactions occur between Gag and Gag-YFP at ratios of 3:1 or higher and create a Gag lattice structure in VLPs that is morphologically indistinguishable from that of VLPs produced with just untagged Gag. This information is useful for the quantitative analysis of Gag-Gag interactions that occur during virus particle assembly and in released immature particles.

Retrovirus particle (virion) infectivity requires diffusion and clustering of multiple transmembrane envelope proteins (Env 3 ) on the virion exterior, yet is triggered by protease-dependent degradation of a partially occluding, membrane-bound Gag polyprotein lattice on the virion interior. The physical mechanism underlying such coupling is unclear and only indirectly accessible via experiment. Modelling stands to provide insight but the required spatio-temporal range far exceeds current accessibility by all-atom or even coarse-grained molecular dynamics simulations. Nor do such approaches account for chemical reactions, while conversely, reaction kinetics approaches handle neither diffusion nor clustering. Here, a recently developed multiscale approach is considered that applies an ultra-coarse-graining scheme to treat entire proteins at near-single particle resolution, but which also couples chemical reactions with diffusion and interactions. A model is developed of Env 3 molecules embedded in a truncated Gag lattice composed of membrane-bound matrix proteins linked to capsid subunits, with freely diffusing protease molecules. Simulations suggest that in the presence of Gag but in the absence of lateral lattice-forming interactions, Env 3 diffuses comparably to Gag-absent Env 3 Initial immobility of Env 3 is conferred through lateral caging by matrix trimers vertically coupled to the underlying hexameric capsid layer. Gag cleavage by protease vertically decouples the matrix and capsid layers, induces both matrix and Env 3 diffusion, and permits Env 3 clustering. Spreading across the entire membrane surface reduces crowding, in turn, enhancing the effect and promoting infectivity.This article is part of the themed issue 'Multiscale modelling at the physics-chemistry-biology interface'., (© 2016 The Author(s).)

Unlabelled: The Gag protein is the main retroviral structural protein, and its expression alone is usually sufficient for production of virus-like particles (VLPs). In this study, we sought to investigate-in parallel comparative analyses-Gag cellular distribution, VLP size, and basic morphological features using Gag expression constructs (Gag or Gag-YFP, where YFP is yellow fluorescent protein) created from all representative retroviral genera: Alpharetrovirus, Betaretrovirus, Deltaretrovirus, Epsilonretrovirus, Gammaretrovirus, Lentivirus, and Spumavirus. We analyzed Gag cellular distribution by confocal microscopy, VLP budding by thin-section transmission electron microscopy (TEM), and general morphological features of the VLPs by cryogenic transmission electron microscopy (cryo-TEM). Punctate Gag was observed near the plasma membrane for all Gag constructs tested except for the representative Beta- and Epsilonretrovirus Gag proteins. This is the first report of Epsilonretrovirus Gag localizing to the nucleus of HeLa cells. While VLPs were not produced by the representative Beta- and Epsilonretrovirus Gag proteins, the other Gag proteins produced VLPs as confirmed by TEM, and morphological differences were observed by cryo-TEM. In particular, we observed Deltaretrovirus-like particles with flat regions of electron density that did not follow viral membrane curvature, Lentivirus-like particles with a narrow range and consistent electron density, suggesting a tightly packed Gag lattice, and Spumavirus-like particles with large envelope protein spikes and no visible electron density associated with a Gag lattice. Taken together, these parallel comparative analyses demonstrate for the first time the distinct morphological features that exist among retrovirus-like particles. Investigation of these differences will provide greater insights into the retroviral assembly pathway., Importance: Comparative analysis among retroviruses has been critically important in enhancing our understanding of retroviral replication and pathogenesis, including that of important human pathogens such as human T-cell leukemia virus type 1 (HTLV-1) and HIV-1. In this study, parallel comparative analyses have been used to study Gag expression and virus-like particle morphology among representative retroviruses in the known retroviral genera. Distinct differences were observed, which enhances current knowledge of the retroviral assembly pathway., (Copyright © 2016, American Society for Microbiology. All Rights Reserved.)

A key stage in HIV-1 maturation toward an infectious virion requires sequential proteolytic cleavage of the Gag polyprotein leading to the formation of a conical capsid core that encloses the viral RNA genome and a small complement of proteins. The final step of this process involves severing the SP1 peptide from the CA-SP1 maturation intermediate, which triggers the condensation of the CA protein into the capsid shell. The details of the overall mechanism, including the conformation of the SP1 peptide in CA-SP1, are still under intense debate. In this report, we examine tubular assemblies of CA and the CA-SP1 maturation intermediate using magic angle spinning (MAS) NMR spectroscopy. At magnetic fields of 19.9 T and above, outstanding quality 2D and 3D MAS NMR spectra were obtained for tubular CA and CA-SP1 assemblies, permitting resonance assignments for subsequent detailed structural characterization. Dipolar- and scalar-based correlation experiments unequivocally indicate that SP1 peptide is in a random coil conformation and mobile in the assembled CA-SP1. Analysis of two CA protein sequence variants reveals that, unexpectedly, the conformations of the SP1 tail, the functionally important CypA loop, and the loop preceding helix 8 are modulated by residue variations at distal sites. These findings provide support for the role of SP1 as a trigger of the disassembly of the immature CA capsid for its subsequent de novo reassembly into mature cores and establish the importance of sequence-dependent conformational plasticity in CA assembly.

During HIV assembly, a protein coat on the inner leaflet of the plasma membrane drives the formation of virus particles, and appears to induce the preferential accumulation of 'raft' lipids in the viral envelope, although the lipid raft concept mainly proposes microdomains of these lipids in the outer leaflet. The common hypothesis is that Gag preferentially associates with, and thereby probably induces, raft-like domains, because the protein is multimerized and specifically linked to two saturated acyl chains. To test this hypothesis, we constructed a minimal in vitro system in which we analysed the interaction of a Gag derivative, which could be triggered to multimerize, with a domain-forming model membrane resembling the inner leaflet of the plasma membrane. Confirming studies with authentic Gag, this Gag derivative only bound to membranes when it was multimerized, myristoylated and when phosphatidylinositol 4,5-bisphosphate was present in the membrane. Unexpectedly, however, the multimerized Gag derivative was largely excluded from ordered domains in model membranes. This suggests that the mechanism of membrane reorganization during HIV assembly does not simply result from a higher affinity of the clustered Gag membrane binding domain to ordered membrane domains, but involves more complex biophysical interactions or possibly also an additional protein machinery., (© 2012 Blackwell Publishing Ltd.)

The HIV structural protein Gag assembles to form spherical particles of radius ∼70 nm. During the assembly process, the number of Gag proteins increases over several orders of magnitude from a few at nucleation to thousands at completion. The challenge in studying protein assembly lies in the fact that current methods such as standard fluorescence or electron microscopy techniques cannot access all stages of the assembly process in a cellular context. Here, we demonstrate an approach using super-resolution fluorescence imaging that permits quantitative morphological and molecular counting analysis over a wide range of protein cluster sizes. We applied this technique to the analysis of hundreds of HIV-Gag clusters at the cellular plasma membrane, thus elucidating how different fluorescent labels can change the assembly of virions.

HIV-1 nucleocapsid protein, NCp7, contains two highly conserved CCHC zinc fingers. Binding of Zn(2+) drives NCp7 from an unfolded to a highly folded structure that is critical for its functions. Using the intrinsic fluorescence of Trp(37), we investigated, by the stopped-flow technique, the folding of NCp7 distal finger through the pH dependence of its Zn(2+) association and dissociation kinetics. Zn(2+) binding was found to involve four different paths associated with the four deprotonated states of the finger. Each binding path involves the rapid formation of an intermediate complex that is subsequently rearranged and stabilized in a rate-limiting step. The equilibrium and kinetic rate constants of the full Zn(2+)-binding process have been determined. At neutral pH, the preferential pathway for the Zn(2+)-driven folding implies Zn(2+) binding to the deprotonated Cys(36) and His(44) residues, in the bidentate state of the finger. The resulting intermediate is then converted with a rate constant of 500 s(-1) into a more suitably folded form, probably through a rearrangement of the peptide backbone around Zn(2+) to optimize the binding geometry. This form then rapidly leads to the final native complex, through deprotonation of Cys(39) and Cys(49) residues and intramolecular substitution of coordinated water molecules. Zn(2+) dissociation is also characterized by a multistep process and occurs fastest via the deprotonated Zn(2+)-bound bidentate state with a rate constant of 3 s(-1). Due to their critical role in folding, the intermediates identified for the first time in this study may constitute potential targets for HIV therapy.

A single multi-domain viral protein, termed Gag, is sufficient for assembly of retrovirus-like particles in mammalian cells. We have purified the human immunodeficiency virus type 1 (HIV-1) Gag protein (lacking myristate at its N terminus and the p6 domain at its C terminus) from bacteria. This protein is capable of assembly into virus-like particles in a defined in vitro system. We have reported that it is in monomer-dimer equilibrium in solution, and have described a mutant Gag protein that remains monomeric at high concentrations in solution. We report that the mutant protein retains several properties of wild-type Gag. This mutant enabled us to analyze solutions of monomeric protein. Hydrodynamic studies on the mutant protein showed that it is highly asymmetric, with a frictional ratio of 1.66. Small-angle neutron scattering (SANS) experiments confirmed its asymmetry and yielded an R(g) value of 34 A. Atomic-level structures of individual domains within Gag have previously been determined, but these domains are connected in Gag by flexible linkers. We constructed a series of models of the mutant Gag protein based on these domain structures, and tested each model computationally for its agreement with the experimental hydrodynamic and SANS data. The only models consistent with the data were those in which Gag was folded over, with its N-terminal matrix domain near its C-terminal nucleocapsid domain in three-dimensional space. Since Gag is a rod-shaped molecule in the assembled immature virion, these findings imply that Gag undergoes a major conformational change upon virus assembly.

HIV-1 nucleocapsid protein (NCp7) condenses the viral RNA within the mature capsid. In a capsid-free system, NCp7 promotes an efficient mechanism of aggregation with both RNA and DNA. Here, we show an analysis of these macromolecular complexes by dark-field imaging using transmission electron microscopy. Thousands of mature NCp7 proteins co-aggregate with hundreds of single-stranded circular DNA molecules (ssDNA) within minutes, as observed with poly(rA). These co-aggregates are highly stable but dynamic structures, as they dissociate under harsh conditions, and after addition of potent ssDNA or NCp7 competitive ligands. The N-terminal domain and zinc fingers of NCp7 are both required for efficient association. Addition of magnesium slightly increases the avidity of NCp7 for ssDNA, while it strongly inhibits co-aggregation with relaxed circular double-stranded DNA (dsDNA). This DNA selectivity is restricted to mature NCp7, compared to its precursors NCp15 and NCp9. Moreover, for NCp15, the linkage of NCp7 with the Gag C-terminal p6-peptide provokes a deficiency in ssDNA aggregation, but results in DNA spreading similar to prototypical SSB proteins. Finally, this co-aggregation is discussed in a dynamic architectural context with regard to the mature HIV-1 nucleocapsid. On the basis of the present data, we propose that condensation of encapsidated RNA requires the C-terminal processing of NCp. Subsequently, disassembly of the nucleocapsid should be favoured once dsDNA is produced by HIV-1 reverse transcriptase.

Recently proposed models that have gained wide acceptance posit that HIV-1 virion morphogenesis is initiated by targeting the major structural protein (Gag) to late endosomal membranes. Thereafter, late endosome-based secretory pathways are thought to deliver Gag or assembled virions to the plasma membrane (PM) and extracellular milieu. We present several findings that are inconsistent with this model. Specifically, we demonstrate that HIV-1 Gag is delivered to the PM, and virions are efficiently released into the extracellular medium, when late endosome motility is abolished. Furthermore, we show that HIV-1 virions are efficiently released when assembly is rationally targeted to the PM, but not when targeted to late endosomes. Recently synthesized Gag first accumulates and assembles at the PM, but a proportion is subsequently internalized via endocytosis or phagocytosis, thus accounting for observations of endosomal localization. We conclude that HIV-1 assembly is initiated and completed at the PM, and not at endosomal membranes.

Human T-cell leukemia virus type 1 (HTLV-1) Gag is targeted to the plasma membrane for particle assembly and release. How HTLV-1 Gag targeting occurs is not well understood. The PPPY and PTAP motifs were previously shown to be involved in HTLV-1 particle release with PTAP playing a more subtle role in virus budding. These L domains function through the interaction with host cellular proteins normally involved in multivesicular body (MVB) morphogenesis. The plasma membrane pathway rather than the MVB pathway was found to be the primary pathway for HTLV-1 particle release in HeLa cells. Intriguingly, disruption of the PTAP motif led to a defect in the targeting of Gag from the plasma membrane to CD63-positive MVBs. Particles or particle buds were observed to be associated with MVBs by electron microscopy, implying that Gag targeting to the MVB resulted in particle budding. Blocking clathrin-dependent endocytosis was found not to influence localization of the HTLV-1 Gag PTAP mutant, indicating that Gag did not reach the MVBs through clathrin-dependent endocytosis. Our observations imply that the interaction between Gag and TSG101 is not required for Gag targeting to the MVB. Overexpression of dynamitin p50 increased particle release, suggesting that there was an increase in the intracellular transport of MVBs to the cell periphery by the utilization of the dynein-dynactin motor complex. Intriguingly, virus particle release with this mutant was reduced by 20-fold compared to that of wild type in HeLa cells, which is in marked contrast to the less-than-twofold defect observed for particle production of the HTLV-1 Gag PTAP mutant from 293T cells. These results indicate that the role of the PTAP motif in L domain function is cell type dependent.

A critical early event in the HIV type 1 (HIV-1) particle assembly pathway is the targeting of the Gag protein to the site of virus assembly. In many cell types, assembly takes place predominantly at the plasma membrane. Cellular factors that regulate Gag targeting remain undefined. The phosphoinositide phosphatidylinositol (4,5) bisphosphate [PI(4,5)P2] controls the plasma membrane localization of a number of cellular proteins. To explore the possibility that this lipid may be involved in Gag targeting and virus particle production, we overexpressed phosphoinositide 5-phosphatase IV, an enzyme that depletes cellular PI(4,5)P2, or overexpressed a constitutively active form of Arf6 (Arf6/Q67L), which induces the formation of PI(4,5)P2-enriched endosomal structures. Both approaches severely reduced virus production. Upon 5-phosphatase IV overexpression, Gag was no longer localized on the plasma membrane but instead was retargeted to late endosomes. Strikingly, in cells expressing Arf6/Q67L, Gag was redirected to the PI(4,5)P2-enriched vesicles and HIV-1 virions budded into these vesicles. These results demonstrate that PI(4,5)P2 plays a key role in Gag targeting to the plasma membrane and thus serves as a cellular determinant of HIV-1 particle production.

Mason-Pfizer monkey virus immature capsids selected from the cytoplasm of baculovirus-infected cells were imaged by scanning transmission electron microscopy. The masses of individual selected Gag particles were measured, and the average mass corresponded to 1,900 to 2,100 Gag polyproteins per particle. A large variation in Gag particle mass was observed within each population measured.

In this study, we examined the ability of human T-cell leukemia virus type I (HTLV-I) Gag and Gag-Pro to assemble immature virus-like particles (VLPs) and bud from insect and mammalian cells. Transmission electron microscopy of insect cells infected with a recombinant baculovirus carrying the entire gag gene revealed that Pr53(Gag) is targeted to the plasma membrane, where it extensively accumulates and forms electron-dense evaginations. However, no particles could be detected either inside the cells or in the culture supernatants. With the Gag-Pro-expressing construct, we observed HTLV-I-specific cytoplasmic proteolysis of the Gag precursor, but again no particle released in the culture supernatants. Transmission electron microscopic analysis of insect cells expressing Gag-Pro polyprotein revealed large vacuoles in the cytoplasm and no budding particles at the plasma membrane. In contrast, human immunodeficiency virus type 1 Gag polyprotein expressed in insect cells is able to release VLPs. These data showed that unlike other retroviruses, Pr53(Gag) is unable to be released as immature VLPs from insect cells. To determine whether the block in particle budding and release is due to an intrinsic property of Pr53(Gag) or the absence of essential cellular factors in insect cells, we expressed Gag and Gag-Pro polyproteins in human 293 cells. The results indicate that Pr53(Gag) and p24 capsid are released within particles into the culture supernatants of human 293 cells. We found that the myristylation of the N-terminal glycine residue is essential for Gag release. Altogether, these results strongly suggest that the proper assembly of HTLV-I particles is dependent on mammalian host cell factors., (Copyright 2000 Academic Press.)

Budding of lentiviruses occurs at the plasma membrane, but the preceding steps involved in particle assembly are poorly understood. Since the Gag polyprotein mediates virion assembly and budding, studies on the localization of Gag within the cell should provide insight into the mechanism of particle assembly. Here, we utilize biochemical fractionation techniques as well as high-resolution confocal imaging of live cells to demonstrate that Gag is localized at the plasma membrane in a striking punctate pattern. Mutation of the N-terminal myristoylation site results in the formation of large cytosolic complexes, whereas mutation of the N-terminal basic residue cluster in the matrix domain redirects the Gag protein to a region partially overlapping the Golgi apparatus. In addition, we show that Gag and Env colocalize at the plasma membrane and that mistargeting of a mutant Gag to the Golgi apparatus alters the pattern of surface expression of Env.

Human immunodeficiency virus (HIV) Gag proteins are assembled into virus particles and then cleaved by the virion-associated HIV protease. Concomitant with Gag processing, doughnut-like HIV particles (the immature form) are converted to particles containing condensed cores (the mature form). Here we describe the in vitro processing of immature HIV Gag virus-like particles (VLP) by exogenously added HIV protease. Following delipidization, sequential processing of immature VLP showed that the matrix (MA)/capsid (CA) junction was cleaved faster than the CA/nucleocapsid (NC) junction, an altered order of processing when compared with authentic processing. When the in vitro processed VLP were analyzed on density gradients, most of the MA, CA-p15 intermediate, and NC were detected as a highly multimeric form, equivalent to the unprocessed VLP. In contrast, CA was found as a monomer dissociated from the multimeric CA-p15 following cleavage of the CA/NC junction. Electron microscopy revealed that the in vitro processing was accompanied by conversion of the doughnut-like particles to particles containing condensed cores and spherical outer shells. The cores, however, lacked core shells, which are normally observed for authentic HIV, suggesting that the in vitro processing of immature VLP failed to produce core shells., (Copyright 2000 Academic Press.)

The matrix protein p17gag (MA) is a product of proteolytic cleavage of the gag gene encoded polyprotein (pr55gag) and is formed when HIV particles undergo the process of maturation. The MA protein is associated with the inner surface of the viral membrane and determines the overall shape of the virion. Previous studies have shown the existence of trimers of MA in solution and in the crystalline state. Here, we used molecular modelling methods to identify feasible interactions between pairs of MA trimers and have related this to structural data from electron microscopy. A systematic search docking procedure was able to identify many energetically favourable conformations for a pair of trimers, including some which have been previously reported. These conformations were used to generate several networks of MA trimers, which were then evaluated against structural observations of the MA network. The model suggested here provides a good match with experimental data such as the spacing between gag protein rings, the number and disposition of glycoprotein (gp41-gp120) knobs and the number of copies of MA in a virus particle. It also rationalizes the observed distribution of sizes of virus particles and is consistent with the presence of icosahedral organisation in mature HIV. Energy minimisation performed with explicit water and counter ions, was used to identify residues participating in inter-trimer interactions. The nature of these interactions is discussed in relation to the conservation of these residues in reported variants of the HIV and SIV MA protein sequences., (Copyright 2000 Academic Press.)

Assembly of infectious human immunodeficiency virus type 1 (HIV-1) proceeds in two steps. Initially, an immature virus with a spherical capsid shell consisting of uncleaved Gag polyproteins is formed. Extracellular proteolytic maturation causes rearrangement of the inner virion structure, leading to the conical capsid of the infectious virus. Using an in vitro assembly system, we show that the same HIV-1 Gag-derived protein can form spherical particles, virtually indistinguishable from immature HIV-1 capsids, as well as tubular or conical particles, resembling the mature core. The assembly phenotype could be correlated with differential binding of the protein to monoclonal antibodies recognizing epitopes in the HIV-1 capsid protein (CA), suggesting distinct conformations of this domain. Only tubular and conical particles were observed when the protein lacked spacer peptide SP1 at the C-terminus of CA, indicating that SP1 may act as a molecular switch, whose presence determines spherical capsid formation, while its cleavage leads to maturation.

We have used an in vitro system that mimics the assembly of immature Moloney murine leukemia virus (M-MuLV) particles to examine how viral structural (Gag) proteins oligomerize at membrane interfaces. Ordered arrays of histidine-tagged Moloney capsid protein (his-MoCA) were obtained on membrane bilayers composed of phosphatidylcholine (PC) and the nickel-chelating lipid 1, 2-di-O-hexadecyl-sn-glycero-3-(1'-2"-R-hydroxy-3'N-(5-amino-1-carboxy pentyl)iminodiacetic acid)propyl ether (DHGN). The membrane-bound arrays were analyzed by electron microscopy (EM) and atomic force microscopy (AFM). Two-dimensional projection images obtained by EM showed that bilayer-bound his-MoCA proteins formed cages surrounding different types of protein-free cage holes with similar cage holes spaced at 81.5-A distances and distances between dissimilar cage holes of 45.5 A. AFM images, showing topological features viewed near the membrane-proximal domain of the his-MoCA protein, revealed a cage network of only symmetrical hexamers spaced at 79-A distances. These results are consistent with a model in which dimers constitute structural building blocks and where membrane-proximal and distal his-MoCA regions interact with different partners in membrane-bound arrays.

Retroviral Gag protein is sufficient to produce Gag virus-like particles when expressed in higher eukaryotic cells. Here we describe the in vitro assembly reaction of human immunodeficiency virus Gag protein, which consists of two sequential steps showing the optimal conditions for each reaction. Following expression and purification, Gag protein lacking only the C-terminal p6 domain was present as a monomer (50 kDa) by velocity sedimentation analysis. Initial assembly of the Gag protein to 60 S intermediates occurred by dialysis at 4 degrees C in low salt at neutral to alkaline pH. However, higher order of assembly required incubation at 37 degrees C and was facilitated by the addition of Mg(2+). Prolonged incubation under these conditions produced complete assembly (600 S), equivalent to Gag virus-like particles obtained from Gag-expressing cells. Neither form disassembled by treatment with nonionic detergent, suggesting that correct assembly might occur in vitro. Electron microscopic observation confirmed that the 600 S assembly products were spherical particles similar to authentic immature human immunodeficiency virus particles. The latter assembly stage but not the former was accelerated by the addition of RNA although not inhibited by RNaseA treatment. These results suggest that Gag protein alone assembles in vitro, but that additional RNA facilitates the assembly reaction.

Immunoelectron microscopy was used to detect actin in wild-type (wt) Moloney murine leukemia virus (MoMuLV) and in virus-like particles (VLP) produced by recombinant Semliki Forest virus expressing only the MoMuLV gag polyprotein. Gold immunolabeling revealed the presence of actin on the surface of delipidized VLP and delipidized wt virus particles. Statistical evaluation of the number of colloidal gold particles per VLP revealed a large range of values and a prevalence of VLP with small numbers of gold particles. Labeling for actin was lost after prolonged treatment of VLP with 1% Nonidet-P40, high-pH buffer, or gelsolin. Gold immunolabeling with antibodies to gag proteins p15 (MA) and p12 and p30 (CA) was abundant and was not affected by treatment of VLP or wt virus with 1% Nonidet or gelsolin. VLP treated with a mixture of detergent and aldehyde fixatives showed more uniform and consistent labeling for actin than without fixatives. Negative staining or heavy metal shadowing revealed a globular surface of delipidized VLP. Stereomicrographs of gold-immunolabeled VLP showed that p15gag and p12gag were associated with the globular projections. Delipidized VLP were also well labeled with antibody to p30gag, which indicated that the gag shell permitted access of antibodies to p30gag and was therefore not a closely packed structure. Labeling for actin-binding proteins moesin and ezrin was negative in both the wt virus and the VLP. The absence of Gaussian distribution of actin in the sample of VLP suggests that actin is not a structural protein and its presence in MuLV virus particles may be fortuitous. This, however, does not rule out any possible role of actin in transport, assembly, budding, or release of virus particles, events which take place in the cytoplasm or at the plasma membrane. The site of actin in VLP is discussed in relation to the present knowledge of the molecular organization of the MuLV gag shell., (Copyright 1999 Academic Press.)

The fullerene-like model for the organization of HIV gag encoded precursor pr55gag was based on the study of prebudding assemblies at the plasma membrane of cells infected with a recombinant baculovirus expressing HIV-1 gag protein. The objective of the present study was to support the model by image processing of virus-like particles (VLP). In this work we used VLP purified by density gradient centrifugation, which caused partial or occasionally complete loss of the lipid bilayer in some VLP without the use of detergent. In addition more plasma membrane-associated pr55gag protein assemblies were processed. Image processing of negatively stained specimens revealed the presence of threefold symmetry and a hexagonal network of rings with a resolution of 29 A in VLP and better than 25 A in membrane associated assemblies. The center-to-center spacing of the rings was 67 A in VLP and 70 A in membrane assemblies. Patches of gag protein oligomers at the plasma membrane were usually round and varying in size, but some of them were triangular. Indication of triangular-shaped gag protein assemblies was also seen in partly dissociated VLP. Since the hexagonal network is formed by the uncleaved gag polyprotein, we conclude that the threefold symmetry applies to all domains including p24gag. The presence of threefold symmetry and the hexagonal network in VLP are consistent with the hypothesis that immature HIV particles possess icosahedral symmetry., (Copyright 1998 Academic Press.)

The determinants for HIV-1 particle morphology were investigated using various deletion and insertion mutants of the Gap precursor protein (Gag) expressed in baculovirus-infected cells and ultrastructural analysis of membrane-enveloped Gag particles under the electron microscope. Five discrete regions were found to influence the size, the variability in dimension, and the sphericity of the particles: (i) the matrix (MA) N-terminal domain, within residues 10-21, the junctions of (ii) MA-CA (capsid), (iii) CA-spacer peptide SP1 and (iv) nucleocapsid (NC)-SP2, and (v) the p6gag C-terminus. Internal regions (ii), (iii), and (iv) contained HIV-1 protease cleavage sites separating major structural domains. No particle assembly was observed for am276, a MA-CA polyprotein mutant lacking the C-terminal third of the CA domain. However, MA-CA domains including the MHR (residues 277-306), or downstream sequence to CA residue 357, resulted in the assembly into tubular or filamentous structures, suggesting a helical symmetry of Gag packing. Mutant amb374, derived from amb 357 by further addition of the heptadecapeptide motif HKARVLAEAMSQVTNSA, overlapping the CA-SP1 junction and the SP1 domain, showed a drastic change in the pattern of Gag assembly, compared to amb357, with formation of spherical particles. These data suggested a novel function for the spacer domain SP1, acting as a spherical shape determinant of the Gag particle which would negatively affect the helical symmetry of assembly of the Gag precursor molecules conferred by the MHR and the downstream CA sequence, within residues 307-357.

The Gag polyprotein of retroviruses is sufficient for assembly and budding of virus-like particles from the host cell. In the case of human immunodeficiency virus (HIV), Gag contains the domains matrix, capsid (CA), nucleocapsid (NC) and p6 which are separated by the viral proteinase inside the nascent virion, leading to morphological maturation to yield an infectious virus. In the mature virus, CA forms a capsid shell surrounding the ribonucleoprotein core consisting of NC and the genomic RNA. To define requirements for particle assembly and functional contributions of individual domains, we expressed domains of HIV Gag in Escherichia coli and purified the products to near homogeneity. In vitro assembly of CA, with or without the C-terminally adjacent spacer peptide, yielded tubular structures with a diameter of approximately 55 nm and heterogeneous length. Efficient particle formation required high protein concentration, high salt and neutral to alkaline pH. In contrast, in vitro assembly of CA-NC occurred at a 20-fold lower protein concentration and in low salt, but required addition of RNA. These results suggest that hydrophobic interactions of capsid proteins are sufficient for particle formation while the RNA-binding nucleocapsid domain may concentrate and align structural proteins on the viral genome.

In previous studies, we demonstrated that the substitution of amino acid triplets for alanines in the carboxy-terminal portion (amino acids 341-352: ATL EEM MTA CQC) of the capsid protein domain (p24) of human immunodeficiency virus type 1 (HIV-1) partly led to an inhibitory effect on the capacity to form virus-like particles (VLPs). In these experiments, the uncleaved Pr55gag precursor protein was expressed by recombinant vaccinia viruses. We have now investigated the effects of these mutations with respect to a replication-competent HI-provirus system. Substitution of amino acids 344-346 (EEM) for alanines, which was previously shown to lead to an inhibition of VLP formation, completely blocked assembly and release of HIV. A substantial reduction of HIV synthesis was also observed in the proviral system after exchange of amino acids 347-348 [MT(A)] which, in contrast, was formerly shown to result in an increased formation of VLPs. Western blot analysis of lysates of cells transfected with these mutated proviral constructs revealed an abnormal intracellular processing pattern of the Pr55gag precursor molecules. Further analyses suggest a structural aberration of these altered polyproteins as the basis for the observed block of virus formation.

Background: Human immunodeficiency virus type 1 (HIV-1) is the causative agent of AIDS and the subject of intense study. The immature HIV-1 particle is traditionally described as having a well ordered, icosahedral structure made up of uncleaved Gag protein surrounded by a lipid bilayer containing envelope proteins. Expression of the Gag protein in eukaryotic cells leads to the budding of membranous virus-like particles (VLPs)., Results: We have used cryo-electron microscopy of VLPs from insect cells and lightly fixed, immature HIV-1 particles from human lymphocytes to determine their organization. Both types of particle were heterogeneous in size, varying in diameter from 1200-2600 A. Larger particles appeared to be broken into semi-spherical sectors, each having a radius of curvature of approximately 750 A. No evidence of icosahedral symmetry was found, but local order was evidenced by small arrays of Gag protein that formed facets within the curved sectors. A consistent 270 A radial density was seen, which included a 70 A wide low density feature corresponding to the carboxy-terminal portion of the membrane attached matrix protein and the amino-terminal portion of the capsid protein., Conclusions: Immature HIV-1 particles and VLPs both have a multi-sector structure characterized, not by an icosahedral organization, but by local order in which the structures of the matrix and capsid regions of Gag change upon cleavage. We propose a model in which lateral interactions between Gag protein molecules yields arrays that are organized into sectors for budding by RNA.

We have developed a system for analysis of histidine-tagged (His-tagged) retrovirus core (Gag) proteins, assembled in vitro on lipid monolayers consisting of egg phosphatidylcholine (PC) plus the novel lipid DHGN. DHGN was shown to chelate nickel by atomic absorption spectrometry, and DHGN-containing monolayers specifically bound gold conjugates of His-tagged proteins. Using PC + DHGN monolayers, we examined membrane-bound arrays of an N-terminal His-tagged Moloney murine leukemia virus (M-MuLV) capsid (CA) protein, His-MoCA, and in vivo studies suggest that in vitro-derived His-MoCA arrays reflect some of the Gag protein interactions which occur in assembling virus particles. The His-MoCA proteins formed extensive two-dimensional (2D) protein crystals, with reflections out to 9.5 A resolution. The image-analyzed 2D projection of His-MoCA arrays revealed a distinct cage-like network. The asymmetry of the individual building blocks of the network led to the formation of two types of hexamer rings, surrounding protein-free cage holes. These results predict that Gag hexamers constitute a retrovirus core substructure, and that cage hole sizes define an exclusion limit for entry of retrovirus envelope proteins, or other plasma membrane proteins, into virus particles. We believe that the 2D crystallization method will permit the detailed analysis of retroviral Gag proteins and other His-tagged proteins.

The HIV-1 capsid protein forms the conical core structure at the center of the mature virion. Capsid also binds the human peptidyl prolyl isomerase, cyclophilin A, thereby packaging the enzyme into the virion. Cyclophilin A subsequently performs an essential function in HIV-1 replication, possibly helping to disassemble the capsid core upon infection. We report the 2.36 A crystal structure of the N-terminal domain of HIV-1 capsid (residues 1-151) in complex with human cyclophilin A. A single exposed capsid loop (residues 85-93) binds in the enzyme's active site, and Pro-90 adopts an unprecedented trans conformation. The structure suggests how cyclophilin A can act as a sequence-specific binding protein and a nonspecific prolyl isomerase. In the crystal lattice, capsid molecules assemble into continuous planar strips. Side by side association of these strips may allow capsid to form the surface of the viral core. Cyclophilin A could then function by weakening the association between capsid strips, thereby promoting disassembly of the viral core.

The zinc-bound form of the human immunodeficiency virus type 1 (HIV-1) nucleocapsid protein, p7, aggregates into particles visible by electron microscopy. The HIV primer tRNA(Lys,3) forms similar high molecular weight complexes with p7 that are also detected by gel mobility shift assays. RNA oligonucleotides of the three stem-loop structures in tRNA(Lys,3) were assayed for the competitive inhibition of p7-tRNA(Lys,3) binding by the intensities of free tRNA(Lys,3) bands on native gels. This reveals that the p7 binds specifically to the central domain of tRNA(Lys,3) where the D and T psi C loops come together, but not the anticodon stem-loop.

The internal structural proteins of retroviruses are proteolytically processed from the Gag polyprotein, which alone is able to assemble into virus-like particles when expressed in cells. All Gag proteins contain domains corresponding to the three structural proteins MA, CA, and NC. We have expressed the CA and NC domains together as a unit in Escherichia coli, both for Rous sarcoma virus (RSV) and for human immunodeficiency virus type 1 (HIV-1). We also expressed a similar HIV-1 protein carrying the C-terminal p6 domain. RSV CA-NC, HIV-1 CA-NC, and HIV-1 CA-NC-p6 were purified in native form by classic methods. After adjustment of the pH and salt concentration, each of these proteins was found to assemble at a low level of efficiency into structures that resembled circular sheets and roughly spherical particles. The presence of RNA dramatically increased the efficiency of assembly, and in this case all three proteins formed hollow, cylindrical particles whose lengths were determined by the size of the RNA. The optimal pH at which assembly occurred was 5.5 for the RSV protein and 8.0 for the HIV-1 proteins. The treatment of the RSV CA-NC cylindrical particles with nonionic detergent, with ribonuclease, or with viral protease caused disassembly. These results suggest that RNA plays an important structural role in the virion and that it may initiate and organize the assembly process. The in vitro system described should facilitate the dissection of assembly pathways in retroviruses.

Expression of TyA (reading frame A) of the yeast retrotransposon Ty1 in Escherichia coli is possible by using efficient transcriptional and translational initiation signals. When expressed in E. coli, the gag homologue of Ty1 assembles into spherical particles similar, but not identical to virus-like particles in the natural host of Ty1, Saccharomyces cerevisiae. Deletion analysis reveals a domain in the C-terminus of TyA that is essential for the assembly process. These findings indicate that an early step of the retroelement life cycle, assembly of the gag homologue into spherical particles, does not depend on specific host factors. The experiments also demonstrate that Ty1 Gag fusion proteins, potential tools for immunization, can be produced in E. coli, an organism that lacks endogenous retrotransposons.

The primary functions of most virus capsids are to protect the viral genome in the extra-cellular milieu and deliver it to the host. In contrast, the capsids of fungal viruses, like the cores of all other known double stranded RNA viruses, are not involved in host recognition but do shield their genomes, and they also carry out transcription and replication. Nascent (+) strands are extruded from transcribing virions. The capsids of the yeast virus L-A are composed of Gag (capsid protein; 76 kDa), with a few molecules of Gag-Pol (170 kDa). Analysis of these 420 A diameter shells and those of the fungal P4 virus by cryo-electron microscopy and image reconstruction shows that they share the same novel icosahedral structure. Both capsids consist of 60 equivalent Gag dimers, whose two subunits occupy non-equivalent bonding environments. Stoichiometry data on other double-stranded RNA viruses indicate that the 120-subunit structure is widespread, implying that this molecular architecture has features that are particularly favorable to the design of a capsid that is also a biosynthetic compartment.

Six mutants that differ in the extent of their carboxyterminal sequences and two deletion mutants of the gag gene of HIV-1 have been characterized morphologically following their expression in Spodoptera frugiperda cells using recombinant baculoviruses. Electron microscopy has revealed distinct morphological forms of the Gag protein that can be classified as either (i) particulate, three-dimensional, spherical or tubular shells or (ii) non-particulate, two-dimensional, flat, curved or convoluted sheets. Progressive truncation of the carboxy terminus of Gag was accompanied by changes in the morphology and formation of spherical particles from predominantly C-type assembly and budding at the plasma membrane, through B-type intracytoplasmic assembly, to A-type assembly with budding mainly into cytoplasmic vacuoles. Deletions within the Pr24 CA domain of Gag abolished particle formation but retained association of the protein with the plasma membrane. All of the observed morphologies of the mutant Gag proteins could be accommodated within an icosahedral model for the organization of spherical particles and a basic hexagonal arrangement of assembled Gag protein monomers.

The three-dimensional structure of peptides encompassing the two zinc-saturated finger motifs of the nucleocapsid protein NCp7 of HIV-1 has been reported by several groups. Whereas the folded structures of the finger motifs were in good agreement, discrepancies existed concerning their spatial relationship since the fingers were found either close to each other [Morellet, N., Jullian, N., De Rocquigny, H., Maigret, B., Darlix, J. L., & Roques, B. P. (1992) Embo J. 11, 3059-3065] or independently folded [Omichinski, J. G., Clore, G. M., Sakaguchi, K., Appella, E., & Gronenborn, A. M. (1991) FEBS Lett. 292, 25-30, Summers, M. F., Henderson, L. E., Chance, M. R., Bess, J. W., Jr., South, T. L., Blake, P. R., Sagi, I., Perez-Alvarado, G., Sowder, R.C., III, Hare, D.R., & Arthur, L. O. (1992) Protein Sci. 1, 563-574]. As in the interacting finger model, Phe16 in the NH2-terminal finger and Trp37 in the COOH-terminal finger were found to be spatially close, the fluorescence properties of the aromatic residues at positions 16 and 37 in the wild-type and two conservatively substituted (12-53) NCp7 peptides were investigated and compared with those of three negative control derivatives where the finger motifs were not in close contact. Direct distance measurements by Tyr-Trp fluorescence resonance energy transfer of the former derivatives yielded a 7-12 A interchromophore distance range which is clearly inconsistent with the 12.5-18 A range measured for the negative controls and thus a random orientation of the zinc finger motifs.(ABSTRACT TRUNCATED AT 250 WORDS)

In the past 10 years, a large number of investigators have produced an enormous amount of information concerning the molecular biology of HIV. These studies at the most basic biological level have provided essential insights into the pathogenesis of the disease. They have supplied the information necessary for the creation of the antiviral therapies now available and have indicated the direction for the development of new therapies now in clinical trials and under investigation. Although the relatively ineffective therapies currently available serve as a constant source of disappointment for those practitioners who care for HIV-infected patients, there is some comfort to be gained from the rapid pace of investigation into the basic biology of the virus and the certainty that any more effective therapy must build upon the basic biological knowledge already obtained. A detailed study of some of the unique features observed during pediatric and perinatal HIV infection, particularly the relatively shortened time from infection to symptoms and the relative importance of CNS disease, may suggest new therapeutic approaches that will benefit both adult and pediatric patients. Finally, a comprehensive knowledge of HIV biology is an essential requirement for therapeutic maneuvers designed to interrupt the transmission of HIV from mother to child.

A panel of 28 insertion mutants of the human immunodeficiency virus type 1 (HIV-1) Gag precursor (Pr55Gag) was constructed by linker-insertion mutagenesis and expressed in recombinant baculovirus-infected insect cells. One set of 14 mutants carried the normal N-myristylation signal; the other set constituted their non-N-myristylated counterparts. The mutants were characterized with respect to (i) assembly and extracellular release of membrane-enveloped budding Gag particles, (ii) intracellular assembly and nuclear transport of Gag cores, (iii) specific processing of Pr55Gag by HIV-1 protease in vivo, and (iv) binding of Pr55Gag to an HIV-1 genomic RNA probe in Northwestern blotting. Insertions within the region between amino acid residues 209 and 334 in the CA domain appeared to be the most detrimental to Gag particle assembly and release of Gag into the external medium, whereas a narrower window, between residues 209 and 241, was found to be critical for secretion of soluble Pr55Gag. Differences in Pr55Gag processing in vivo and RNA binding in vitro between N-myristylated and non-N-myristylated Gag mutants suggested a major conformational role for the myristylated N terminus of Gag precursor. In coinfection experiments using wild-type Gag- and mutant Gag-expressing recombinants, a transdominant negative effect on Gag particle assembly and release was observed for insertions located in two separate domains, the matrix and nucleocapsid.

To analyze the constituents of retroviruses, the Moloney murine leukemia virus was disrupted and observed by dark-field electron microscopy. Virus disruption was achieved by several methods: osmotic shock, freezing-thawing cycles, and exposure to urea up to 4 M, to NaCl up to 1 M, and to Triton X-100. Several components associated with broken Moloney murine leukemia virus were repeatedly found in preparations. These components have been described as rings, thick filaments, chain-like filaments, threads covered with proteins, threads with buckles, and naked threads. A quantitative analysis of the occurrence of these components has been carried out. Among them, the thick filaments composed of a compact helical arrangement of small beads 5 nm in diameter were considered to represent the nucleocapsid. The protease-sensitive buckles found on some threads could be a compact form of the viral RNA associated to the nucleocapsid protein NCp10. The RNase-sensitive naked threads are interpreted as the deproteinized viral RNA itself. The ubiquitous chain-like filaments possess a periodic structure identical to that of polymerized type VI collagen. It is proposed that this adhesive protein is associated with the viral envelope taken from the cell membrane during the budding process of retroviruses.

Virus-like particles produced by a recombinant baculovirus containing the HIV gag gene were examined by negative staining after delipidization. This technique demonstrated that the gag-protein shell consisted of radially arranged short rods which formed a network of ring-like structures. Similar structures were observed at the plasma membrane of infected cells which had been opened by wet-cleaving. Occasionally five or six subunits were observed forming a ring. These findings suggest that the gag-encoded precursor (pr55) is a rod-like molecule about 34 A in diameter and 85 A in length. A protein cylinder of such dimensions would have a molecular weight of 56K. The center-to-center distance of two neighboring rings formed by the rods was 66 +/- 8 A (N = 200) by direct measurements and 65 A as obtained from averaged images. This morphology and these dimensions indicate that the virus-like particles contain the gag precursor in the form of a near-spherical "fullerene-like" icosahedral shell. Our data indicate that the triangulation number of the rings equals 63. However, since one rod of pr55 is shared by two rings, the number of copies of the precursor will be 1890 as opposed to 2522 if the molecules were closely packed. The particle diameter of 102 nm deduced from the proposed model was close to the diameter obtained from thin sections of low-temperature-embedded specimens (103-108 nm).

To obtain a better understanding of the processes of assembly and morphogenesis of simian immunodeficiency virus (SIV), recombinant vaccinia viruses containing regions of the gag-pol open reading frame were constructed and their intracellular expression as well as the ability of the Gag polypeptides to be released into the culture medium as constituents of virus-like particles were studied. Biochemical and electron microscopy analyses of cells infected with a recombinant expressing only the SIV matrix (MA) domain of the Gag polyprotein (v-p17 gag) showed that this protein self-assembles into 100-nm virus-like particles which are released into the culture medium. Interestingly, coexpression of SIV MA and Env proteins resulted in incorporation of gp120 and gp41 proteins into the recombinant p17-made particles. In addition when a positively charged domain of SIV MA (residues 26-33), which is highly conserved among all HIV and SIV MA proteins, was mutated into an acidic region, particle release was abolished without affecting protein expression, processing, or stability. Further characterization of the phenotype of this mutant by electron microscopy indicated that this mutant was blocked at the stage of assembly. These results suggest that SIV MA protein, along with its function in myristic acid-mediated membrane targeting, has intrinsic information for self-assembly as well as incorporation of viral Env glycoproteins into particles.

Nuclei of cells infected with Moloney murine leukemia virus (MoMuLV) were examined for the presence of gag proteins. This analysis was performed in conjunction with other studies suggesting a possible role for gag proteins in regulating nuclear events relating to processing and/or transport of viral genomic RNA. We detected Pr65gag and a p30-related protein in a nuclear fraction of infected cells. We also found evidence that a highly conserved amino acid sequence, which is shared by p30 and U1 small nuclear ribonucleoprotein 70-kDa protein, is a component of the nuclear targeting sequence for Pr65gag. Immunoelectron microscopy studies with a monoclonal anti-p12 antibody established that approximately 18% of gag-containing proteins of MoMuLV are located in the nucleus. Such gag-containing proteins from a mutant MoMuLV that lacks N-terminal myristic acid had greater affinity for the nucleus, suggesting that fatty acid acylation of Pr65gag plays a role in overcoming the proposed nuclear transport signal. The possible roles that nuclear gag proteins may play in retroviral replication are discussed.

The gag-pol coding region of the HIV-2BEN genome was expressed in CV-1 cells infected with four recombinant vaccinia viruses (VV). These recombinant VV encoded either the whole gag-pol region or the gag gene including the protease-coding region of the pol gene or the gag gene truncated at its 3'-end or only the pol gene. The HIV-2BEN gag precursor p55, its mature cleavage products p24 and p17 as well as the pol reverse transcriptase (RT) p66 were detected in VV-infected CV-1 cells. The p55 and two intermediate cleavage products p40 and p35 were myristilated. Comparison to lysates of permanently HIV-2BEN-infected Molt 4 clone 8 cells revealed that several additional gag and pol proteins were present in the VV-infected CV-1 cells. Deletion of the gag and pol overlapping region coding for the viral protease prevented cleavage of the recombinant gag precursor. Electron microscopy of VV-infected CV-1 cells revealed budding structures and immature as well as mature retroviral particles formed by the recombinant gag proteins. Striking differences in the ability to form complete particles were observed between the different recombinant VV. Expression of the truncated gag gene led to the formation of budding structures, but completely budded circular particles were not detectable. Such particles were produced by expression of the whole gag gene and the protease. Mature virions with an internal core structure were only detected in VVgagpol-infected cells. From these findings we conclude that the 3'-end of the gag gene coding for the p16 protein is essential for the formation of complete HIV-2 particles and that the pol proteins support the assembly of the viral core.

Seven recombinants of AcNPV harboring various forms of complete or truncated gag gene from HIV-1 were constructed to determine which functional domains of the gag polyprotein are implicated in its self-assembly and cellular localization. The p6 carboxy-terminal portion of the p15 NCgag domain appeared to be dispensable for assembly, budding, and release of gag particles by insect cells. However, all the morphopoietic information was not entirely confined to the p9 NC domain, as N-myristylation could compensate for p15 NC deletion in gag assembly and the budding process. The two consensus karyophilic signals situated in the p17 MAgag domain were inefficient for targeting nonmyristylated forms of gag polyprotein to the nucleus when the p6 NC domain was deleted. In the presence of p6, or with a third, baculovirus-specific, karyophilic signal added at its N-terminus, gag particles relocated in the nucleus. These data suggested that p6 played a critical role in the conformation of gag polyprotein.

The human immunodeficiency virus type 1 (HIV-1) Gag protein was expressed in A549 cells infected with recombinant adenovirus types 4 and 7, each carrying the HIV-1 gag and pro genes. The Gag protein was assembled into enveloped virus-like particles that budded from plasma and vacuolar membranes. The particles, isolated by precipitation and isopycnic density centrifugation, contained both processed and unprocessed Gag-associated proteins.

The vaccinia virus expression system was used to determine the role of human immunodeficiency virus type 1 (HIV-1) protease in viral morphogenesis and maturation. The unprocessed p55 gag precursor polyprotein alone was assembled to form HIV-1 particles which budded from cells. The particles were spherical and immature, containing an electron-dense shell in the particle submembrane; there was no evidence of core formation. Expression of both gag and pol proteins from a recombinant containing the complete gag-pol coding sequences resulted in intracellular processing of gag-pol proteins and the production of mature particles with electron-dense cores characteristic of wild-type HIV virions. To ascertain the role of protein processing in particle maturation, the pol ORF in the gag-pol recombinant was truncated to limit expression of the pol gene to the protease domain. With this recombinant expressing p55 gag and protease, intracellular processing was observed. Some of the resultant particles were partially mature and contained processed gag protein subunits. In contrast, particle maturation was not observed when the HIV-1 protease and p55 gag were coexpressed from separate recombinants, despite evidence of intracellular gag processing. These findings suggest that HIV-1 protease must be an integral component of the full-length gag-pol precursor for optimal processing and virion maturation.