Search

The creation of skeletal muscle tissue in vitro is a major topic of interest today in the field of biomedical research, due to the lack of treatments for muscle loss due to traumatic accidents or disease. For this reason, the intrinsic properties of nanofibrillar structures to promote cell adhesion, proliferation, and cell alignment presents an attractive tool for regenerative medicine to recreate organized tissues such as muscle. Electrospinning is one of the processing techniques often used for the fabrication of these nanofibrous structures and the combination of synthetic and natural polymers is often required to achieve optimal mechanical and physiochemical properties. Here, polycaprolactone (PCL) is selected as a synthetic polymer used for the fabrication of scaffolds, and the effect of protein addition on the final scaffolds' properties is studied. Collagen and gelatin were the proteins selected and two different concentrations were analyzed (2 and 4 wt/vol%). Different PCL/protein systems were prepared, and a structural, mechanical and functional characterization was performed. The influence of fiber alignment on the properties of the final scaffolds was assessed through morphological, mechanical and biological evaluations. A bioreactor was used to promote cell proliferation and differentiation within the scaffolds. The results revealed that protein addition produced a decrease in the fiber size of the membranes, an increase in their hydrophilicity, and a softening of their mechanical properties. The biological study showed the ability of the selected systems to harbor cells, allow their growth and, potentially, develop musculoskeletal tissues., (© 2021 The Authors. Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

The crosslinking and related gel properties of 3 wt% gelatin (type-A and type-B) catalyzed by microbial transglutaminase (MTG, dose of 0-20 U/g gelatin) have been investigated. A MTG-depended increase in the molecular weight and mean diameter of both gelatins was observed, where type-A presented a higher crosslinking efficiency than type-B due to more acyl donors of the former. As MTG concentration increased, the surface hydrophobicity and thermal stability of type-A gelatin increased. Textural profile analysis (TPA) of type-A gelatin hydrogel showed a decrease in hardness and slight increase in springiness, while type-B gelatin gel was not affected generally. Rheological measurements confirmed the melting point of type-A gelatin hydrogel continually increased until the disappearance of gel thermo-reversibility at higher MTG levels (≥12 U/g gelatin), while type-B gelatin hydrogel always showed a sol-gel transition, suggesting that the gel performance was depended on the dominance of whether physical crosslinking or chemical crosslinking. Scanning electron microscope (SEM) results showed that the network structure of the type-A gelatin became more irregular as MTG increasing which indicated that introducing additional covalent cross-links within or between gelatin chains had a profound influence on gel's network structure, closely associated with the gel properties mentioned above. In summary, the superiority of type-A in MTG-crosslinking efficiency than type-B, can be used to modulate the physical and mechanical properties of gelatin hydrogel, governing by the combing of weak physical crosslinking and strong covalent crosslinking, which will be suitable for numerous industrial applications., Competing Interests: Declaration of competing interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The effects of two pretreatments (microwaves or oven-drying) on the dogfish (Squalus acanthias) skin as well as two drying processes (freeze-drying or spray-drying) on the extracted gelatins were studied. Thus six types of gelatins were obtained, three of which were freeze-dried (FG) and the others were spray-dried (SG), from the untreated skin (US), microwaves-pretreated skin (MS) and oven-pretreated skin (OS). The highest yield (8.67%) was obtained for the OSFG, while the lowest one (3.06%) was measured for the OSSG. Interestingly, all gelatins exhibited relatively high protein (84.02-89.53%), and low lipid (0.50-1.71%) and ash (3.05-7.17%) contents. In addition, gelatins were analyzed by the Fourier transform infrared and the spectra displayed important differences in some specific peaks, particularly in the amide I, amide II and amide III. The gelatins extracted from the untreated skin, regardless the drying method, presented the highest foaming capacity. The textural profile analysis showed that USSG was the hardest (213.6 g) and the chewier (23.8 N × mm) gelatin. Moreover, analysis of thermal properties showed that USSG also has the highest glass-transition temperature. The interesting properties of gelatin extracted from dogfish skin encourage their future use as a functional ingredient in industrial food formulations., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The synergistic effects of the combination of acetylated distarch adipate and sesbania gum (C-ADA-SG) with the ratio of 5:0, 4:1, 2.5:2.5, 1:4, 0:5, accounting for 5% (w/w) of the starch on gelatinization and retrogradation properties of wheat starch (WS) were studied. Scanning Electron Microscopy (SEM) showed that the microstructure of gelatinized WASs (WS added with C-ADA-SG) tended to be smoother. Based on the results of Rapid Visco-Analyzer (RVA) and Differential Scanning Calorimetry (DSC), the pasting characteristics of WS were affected and the gelatinization process was retarded by C-ADA-SG. After seven-day storage at 4 °C, compared to WS, the gel firmness, syneresis, retrogradation enthalpy, and the relative crystallinity of WASs clearly decreased by 17.47-44.36 g, 11.16-17.93%, 0.22-0.80 J·g -1 , and 4.06-8.61%, respectively. However, the band ratio 1639:1157 cm -1 by FTIR and loss tangent (tan δ) value were increased with C-ADA-SG addition. Meanwhile, X-Ray Diffraction (XRD) reflected that native WS showed A-type crystal structure, which transferred to B + V type after retrogradation. Furthermore, Low-Field Nuclear Magnetic Resonance (LF-NMR) declared that C-ADA-SG increased the water mobility and limited the diffusion and seepage of water during storage. Generally, ADA and SG produced a synergistic effect on retarding the gelatinization and retrogradation of WS., Competing Interests: Declaration of competing interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Current wound dressings have poor antimicrobial activities and are difficult to degrade. Therefore, biodegradable and antibacterial dressings are urgently needed. In this article, we used the hydrothermal method and side-by-side electrospinning technology to prepare a gelatin mat with incorporated zinc oxide/graphene oxide (ZnO/GO) nanocomposites. The resultant fibers were characterized by field emission environment scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). Results indicated that the gelatin fibers had good morphology, and ZnO/GO nanocomposites were uniformly dispersed on the fibers. The loss of Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ) viability were observed to more than 90% with the incorporation of ZnO/GO. The degradation process showed that the composite fibers completely degraded within 7 days and had good controllable degradation characteristics. This study demonstrated the potential applicability of ZnO/GO-gelatin mats with excellent antibacterial properties as wound dressing material.

Background: Although the stability of proteins is of significance to maintain protein function for therapeutical applications, this remains a challenge. Herein, a general method of preserving protein stability and function was developed using gelatin films., Methods: Enzymes immobilized onto films composed of gelatin and Ethylene Glycol (EG) were developed to study their ability to stabilize proteins. As a model functional protein, β-glucosidase was selected. The tensile properties, microstructure, and crystallization behavior of the gelatin films were assessed., Results: Our results indicated that film configurations can preserve the activity of β-glucosidase under rigorous conditions (75% relative humidity and 37°C for 47 days). In both control films and films containing 1.8 % β-glucosidase, tensile strength increased with increased EG content, whilst the elongation at break increased initially, then decreased over time. The presence of β-glucosidase had a negligible influence on tensile strength and elongation at break. Scanning electron-microscopy (SEM) revealed that with increasing EG content or decreasing enzyme concentrations, a denser microstructure was observed., Conclusion: In conclusion, the dry film is a promising candidate to maintain protein stabilization and handling. The configuration is convenient and cheap, and thus applicable to protein storage and transportation processes in the future., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Pomegranate ( Punica granatum L.) seed juice by-product (PSP) was added as reinforcing and antimicrobial agent to fish gelatin (FG) films as a promising eco-friendly active material for food packaging applications. A complete linkage analysis of polysaccharides in PSP showed xylan and cellulose as main components. This residue showed also high total phenolic content and antioxidant activity. Three formulations were processed by adding PSP to FG (0, 10, 30 wt. %) by the casting technique, showing films with 10 wt. % of PSP the best performance. The addition of PSP decreased elongation at break and increased stiffness in the FG films, particularly for 30 wt. % loading. A good compatibility between FG and PSP was observed by SEM. No significant ( p < 0.05) differences were obtained for barrier properties to oxygen and water vapour permeability compared to the control with the incorporation of PSP, whereas water resistance considerably increased and transparency values decreased ( p < 0.05). High thermal stability of films and inhibition against S. aureus were observed. The addition of PSP at 10 wt. % into FG was shown as a potential strategy to maintain the integrity of the material and protect food against lipid oxidation, reducing huge amounts of pomegranate and fish wastes.

In this study, surface, chemical, physicochemical and barrier properties of films treated with hexamethyldisiloxane (HMDSO) cold plasma were investigated. Normal and high amylose starches were gelatinized at different level to obtain films with different amount of free amylopectin. The obtained films were subjected to HMDSO plasma treatment. XPS analysis indicated chemical changes including substitution and crosslinking of the starch molecule, as reflected by the CSi bond increasing and the C-OH bonds reduction on treated films. These changes modified the thermal transitions (Tm and ΔH). The highest amount of CSi bonds was more noticeable in the TF50 film, suggesting a better interaction between active species of plasma and the free amylopectin released into the continuous phase of the film. Moreover, active species of plasma increased the crystallinity in all films. These results suggested that a higher helical packaging, crosslinking and hydrophobic blocking groups (CSi) of starch molecules resulted in films with improved barrier performance against water molecules., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this paper, we studied the aggregation of amphiphilic polymer epoxy-terminated polydimethylsiloxane (PDMS-E) grafted gelatin (PGG) in water induced by methanol, ethanol, 2-propanol, acetone, tetrahydrofuran (THF), and 1,4-dioxane. The aggregation pattern of the polymer was monitored by infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. It was revealed that the aggregate morphology showed clear dependence on the solvent polarity. The PGG aggregates had regular spherical morphology in polar solvents, including water, methanol, ethanol, 2-propanol, and acetone. The coating performance was evaluated by X-ray photoelectron spectroscopy and friction experiment, and PGG and acetone coating exhibited excellent coating performance on the surface of pigskin. Gel was formed in acetone and tetrahydrofuran (THF) with the slow evaporation of solvent, and this property can possibly be applied to industrial sewage treatment. White precipitate and soft film were formed in non-polar 1,4-dioxane.

Glaucoma is a lifelong disorder that necessitates continuous medical therapy to manage its symptoms and preserve the vision of patients; accordingly, it is highly beneficial to develop a long-acting injectable depot system that can exhibit better drug delivery capability. This study aims to investigate the effect of the amination degree of gelatin on the carbodiimide-mediated grafting of thermo-responsive poly(N-isopropylacrylamide) segments onto biodegradable protein backbone molecules. Moreover, the potential applications of these carrier materials for intracameral pilocarpine administration in glaucomatous subjects will be considered. The gelatins with different amination degrees that are prepared by controlling the feed amount of adipic acid dihydrazide are further used for the synthesis of graft copolymers. The results of chemical characterization and electron microscopy studies showed that both grafting reaction effectiveness and gelling carrier ultrastructure vary in response to biomaterial amination. Compared to unmodified biopolymer thermogel without gel formation, graft copolymers that are composed of aminated gelatin networks showed a more remarkable temperature-triggered pilocarpine capture under physiological conditions. This could create more stable depot-forming carrier systems with improved in vivo pharmacological efficacy. Although the increase in amination degree enhances the biodegradation resistance of graft copolymers for achieving extended drug release profiles and provides significant therapeutic benefits, carriers with excess positive charges may potentiate the cytotoxic actions of oxidative stress signals and may cause damage in cellular barrier integrity. Consequently, unfavorable ocular tissue responses and poor treatment outcomes are observed in glaucomatous rabbits. For the first time, our findings suggest that the amination degree of gelatin performs a crucial function in guiding the development of structure-property-function relationships of biodegradable thermogels as intracameral drug delivery systems., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A novel material for making capsules was prepared with tilapia scale gelatin and konjac glucomannan (KGM). Rheological behaviors of gelatin with KGM at different levels (0.1%, 0.15%, and 0.2%, w/w) were investigated. The highest values (P < 0.05) of gel strength (518.33 ± 6.17 g) and melting temperature (39.7 ± 0.11 °C) could be observed at the gelatin solution with 0.15% (w/w) KGM. The tensile strength (TS) and elongation at break (EAB) of the films increased with the increasing of KGM. The water contact angle was enhanced with the increasing of KGM, indicating the decrease of the film hydrophilicity. XRD and FTIR showed the interactions between gelatin and KGM. Gelatin solution with 0.15% KGM is suitable for preparing capsules. Drug dissolution test in vitro showed the shell rupture time is in range of 3-5 min, and 80% of the drugs were released within 10 min. Therefore, the composite materials made of tilapia scale gelatin and KGM can be utilized for hard capsules., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Rheological, microstructural and emulsifying properties of fish gelatin phosphorylated using sodium trimetaphosphate (STMP) were studied. Phosphorylation was carried out at 50 °C for 0, 0.5, 1 or 2 h. Rheological behaviors indicated that phosphorylation decreased gelation rate constant (k gel ) and apparent viscosity of gelatin solutions. Phosphorylation time was inversely proportional to tan δ; gelling and melting points of fish gelatin gels; however gel properties could be improved by short time of phosphorylation. Scanning electron microscopy and atomic force microscopy revealed that longer time of phosphorylation resulted in looser gel network with more aggregation. Longer phosphorylation time could stabilize fish gelatin emulsions, and endowed emulsions with smaller particle size and lower coefficient viscosity, but higher ζ-potential values. These results suggested that phosphorylation could be applied to obtain fish gelatin with varying functional properties suitable for numerous industrial applications., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The demand of new strategies for the induction of bone regeneration is continuously increasing. Biomimetic porous gelatin-nanocrystalline hydroxyapatite scaffolds with tailored properties were previously developed, showing a positive response in terms of cell adhesion, proliferation, and differentiation. In the present paper, we focused on their osteoinductive properties. The effect of scaffolds on osteogenic differentiation of human mesenchymal stromal cells (hMSCs) was investigated in vitro. hMSCs were seeded on GEL (type A gelatin) and GEL containing 10 wt% hydroxyapatite (GEL-HA) and cultured in osteogenic medium. Results showed that GEL and GEL-HA10 sustained hMSC differentiation, with an increased ALP activity and a higher expression of bone specific genes. The osteoinductive ability of these scaffolds was then studied in vivo in a heterotopic bone formation model in nude mice. The influence of hMSCs within the implants was examined as well. Both GEL and GEL-HA10 scaffolds mineralized when implanted without hMSCs. On the contrary, the presence of hMSC abolished or reduced mineralization of GEL and GEL-HA10 scaffolds. However, we could observe a species-specific response to the presence of HA, which stimulated osteogenic differentiation of human cells only. In conclusion, the scaffolds showed promising osteoinductive properties and may be suitable for use in confined critical defects. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 914-923, 2018., (© 2017 Wiley Periodicals, Inc.)

The aim of this work was to evaluate the plasticizing effect of Lysine (Lys), Arginine (Arg) and Histidine (His) on gelatin films. Gelatin films incorporated with Lys, Arg and His at different levels (0, 0.5 and 1.0%) were prepared. The films without amino acids were prepared as controls. The addition of Lys increased the elongation at break (EAB) but decreased the tensile strength (TS) compared to the control, especially at 1.0% incorporated level. Arg had cross-linking effect on gelatin films through hydrogen bonds demonstrated by FTIR Analysis, which increased TS of the films. His films showed worse EAB, transmission and transparence compared to the control. Furthermore, the addition of Lys and His reduced L* value and a* value with the coincidentally increased b* and ΔE* values compared with the control. Thermal stability (DSC) and UV light barrier of gelatin films were improved by the addition of three kinds of amino acids. Thus, Lys and Arg had potential to improve the properties of gelatin films as natural plasticizer and cross-linker, respectively., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This study investigated the physico-mechanical and structural properties of composite edible films based on eggshell membrane gelatin (G) and chitosan (Ch) (75G:25Ch, 50G:50Ch, 25G:75Ch). The results demonstrated that the addition of Ch increased elongation at break significantly (p<0.05), but resulted in no significant change in tensile strength (TS) using 75G:25Ch, 50G:50Ch mixtures in comparison with gelatin-based film. The water solubility and water vapor permeability of the 50G:50Ch film decreased significantly compared to plain films (100G:0Ch and 0G:100Ch) and other composite films (p<0.05). Fourier transform infrared spectroscopy evaluation of structural properties showed that both polymers are totally miscible. Scanning electron microscopy was used to study the morphology of the composite films; it revealed a homogenous and compact structure in 75G:25Ch and 50G:50 Ch. Also, the chemical interactions introduced by the addition of chitosan to eggshell membrane gelatin as new resources could improve the films' functional properties., (Copyright © 2017. Published by Elsevier B.V.)

The development of chitin-based materials with favorable mechanical properties and biocompatibility is an important research goal owing to the wide-ranging practical applications. In this study, a composite film was prepared using chitin nanofibers and gelatin. The CNF/gelatin composite film was highly viscous and had a fine nanofiber structure. The transmittances indicated high transparency, regardless of nanofiber content. The water content of the CNF/gelatin composite film increased linearly as the gelatin content increased. Although the CNF/gelatin composite film did not induce severe inflammation, it strongly induced fibroblast proliferation, indicating high biocompatibility. Based on these results, the films are suitable for biological applications, e.g., tissue engineering, medicines, and cosmetics., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Objective: Biomimetic design will significantly improve growth and regeneration of dural cells and tissue for better repairing effects and fewer complications in repairing the native dura. This study designed a novel composite, biomimetic substitute based on the characteristics of native dura extracellular matrix., Methods and Results: This substitute is expected to rapidly induce cell adhesion, migration, and fast regeneration of neotissue. The material characteristics (contact angle, surface charge, and zeta potential were evaluated), in vitro biological characteristics (cell stretch, connections between cells, cell proliferation) and in vivo tissue regeneration capability of this substitute were evaluated, compared to those of collagen dura substitute, the mostly used dura substitute. The results showed that the surface properties of this composite substitute were more biomimetic to native extracellular matrix than collagen substitute did, together with better cytocompatibility, tissue ingrowth, and neoangiogenesis. This composite substitute further demonstrated in clinical case study its ideal repair effect with no CSF leakage or other adverse reactions., Conclusion: In conclusion, the new biomimetic composite substitute provides alternative substitute for dura repairing.

This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

Enzymatically crossliked gelatin hydrogel was submitted to two different drying methods: air drying and freeze drying. The resulting polymeric tridimensional arrangement (compact or porous, respectively) led to different thermal and swelling properties. Significant differences (p < 0.05) on thermal and mechanical characteristics as well as swelling in non-enzymatic gastric and intestinal simulated fluids (37 ºC) were detected. Water absorption data in such media was modelled according to Higuchi, Korsmeyer-Peppas, and Peppas-Sahlin equations. Freeze dried hydrogel showed Fickian diffusion behavior while air dried hydrogels presented poor adjustment to Higuchi model suggesting the importance of the relaxation mechanism at the beginning of swelling process. It was possible to conclude that the same gelatin hydrogel may be suitable to different applications depending on the drying process used.

The prospects for successful peripheral nerve repair using fibre guides are considered to be enhanced by the use of a scaffold material, which promotes attachment and proliferation of glial cells and axonal regeneration. Macroporous alginate fibres were produced by extraction of gelatin particle porogens from wet spun fibres produced using a suspension of gelatin particles in 1.5% w/v alginate solution. Gelatin loading of the starting suspension of 40.0, 57.0, and 62.5% w/w resulted in gelatin loading of the dried alginate fibres of 16, 21, and 24% w/w respectively. Between 45 and 60% of the gelatin content of hydrated fibres was released in 1h in distilled water at 37°C, leading to rapid formation of a macroporous structure. Confocal laser scanning microscopy (CLSM) and image processing provided qualitative and quantitative analysis of mean equivalent macropore diameter (48-69μm), pore size distribution, estimates of maximum porosity (14.6%) and pore connectivity. CLSM also revealed that gelatin residues lined the macropore cavities and infiltrated into the body of the alginate scaffolds, thus, providing cell adhesion molecules, which are potentially advantageous for promoting growth of glial cells and axonal extension. Macroporous alginate fibres encapsulating nerve cells [primary rat dorsal root ganglia (DRGs)] were produced by wet spinning alginate solution containing dispersed gelatin particles and DRGs. Marked outgrowth was evident over a distance of 150μm at day 11 in cell culture, indicating that pores and channels created within the alginate hydrogel were providing a favourable environment for neurite development. These findings indicate that macroporous alginate fibres encapsulating nerve cells may provide the basis of a useful strategy for nerve repair., (Copyright © 2016 Elsevier B.V. All rights reserved.)

We studied the potential of polymeric cryogel matrices such as 2-hydroxyethyl methacrylate (HEMA)-agarose (HA) and gelatin matrix as a transporting and storage material for mammalian cells. Both the HA and gelatin matrices were found to possess a homogenous distribution of pores as shown by scanning electron microscopic (SEM) images and flow rate of 8 and 5 mL/min, respectively. In the case of HA cryogel, after 5 days of simulated transportation, C2C12 cells kept in cryogel matrix showed higher percentage viability (89%) as compared to 64.5% viability of cells kept in suspension culture. The cells recovered from the HA cryogel were able to proliferate as revealed by the microscopic analysis. In the case of gelatin cryogel, it was shown that C2C12 cells seeded on the cryogel under simulated transportation condition were found to proliferate over the period of 5 days. It was also observed that the cells after simulation can be cryopreserved and the duration of cryopreservation does not affect their viability. Furthermore, gelatin cryogel was used for cryopreservation of HepG2 and HUVEC cells to extend the system for other cell types. These results show the potential of cryogels as efficient, low-cost transporting matrix at room temperature and in cryo-conditions., Competing Interests: The authors declare no competing financial interests.

The rheological behavior, gel properties and nanostructure of complex modified fish scales gelatin (FSG) by pectin and microbial transglutaminase (MTGase) were investigated. The findings suggested that MTGase and pectin have positive effect on the gelation point, melting point, apparent viscosity and gel properties of FSG. The highest values of gel strength and melting temperature could be observed at 0.8% (w/v) pectin. Nevertheless, at highest pectin concentration (1.6% w/v), the gel strength and melting temperature of complex modified gelatin gels decreased. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) analysis revealed that MTGase catalyzed cross-links among soluble fish scales gelatin - pectin complexes, which could be responsible for the observed increase in rheological behavior, gel strength and melting temperature of modified complex gels., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Multi-layer film structures of poly(lactic acid) (PLA) and fish gelatin (FG), prepared using the solvent casting technique, were studied in an effort to produce bio-based films with low oxygen (OP) and water vapor permeability (WVP). The scanning electron microscopy (SEM) images of triple-layer film showed that the outer PLA layers are being closely attached to the inner FG layer to make continuous film. The OP of multi-layer film (5.02cm 3 /m 2 daybar) decreased more than 8-fold compared with that of the PLA film, and the WVP of multi-layer film (0.125gmm/kPah m 2 ) also decreased 11-fold compared with that of the FG film. Lamination with PLA profoundly increased the water resistance of the bare gelatin film. Meanwhile, the tensile strength of the triple-layer film (25±2.13MPa) was greater than that of FG film (7.48±1.70MPa). At the same time, the resulting film maintains high optical clarity. Differential scanning calorimetry (DSC) analysis also revealed that the materials were compatible showing only one T g which decreased with FG deposition. This material exhibits an environmental-friendliness potential and a high versatility in food packaging., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Gelatin, derived from collagen, has both the mechanical properties required for tissue growth, as well the functional domains required for cell binding. In its natural state, gelatin derives its properties from a network of structured, intertwined, triple helical chains, which is stabilized by hydrogen bonds at temperatures below 37 °C. The mechanical properties of such a structure can be further controlled by additional enzymatic cross-linking. But, in contrast to simple polymer systems, the response to an imposed deformation is here determined by two competing factors: the establishment of the cross-linked mesh vs. the self-assembly of the fibrils into larger and stronger hierarchical structures. Therefore, properties deduced from the response to measurements such as rheology or swelling, are a combination of these two very different factors, hence a modeling is impossible unless more precise knowledge regarding the internal structure is available. The cryogenic-temperature scanning electron microscopy (cryo-SEM) was adopted to image the fully hydrated gelatin network in which distinct chain folding was observed at low densities, while cross-linked networks were observed at higher densities. Based on these images, a theoretical model which results in good agreement between the mesh sizes of both networks and their mechanical properties was developed.

Gelatin nanoparticles can be tuned with respect to their drug loading efficiency, degradation rate, and release kinetics, which renders these drug carriers highly suitable for a wide variety of biomedical applications. The ease of functionalization has rendered gelatin an interesting candidate material to introduce specific motifs for selective targeting to specific organs, but gelatin nanoparticles have not yet been modified to increase their affinity to mineralized tissue. By means of conjugating bone-targeting alendronate to biocompatible gelatin nanoparticles, a simple method is developed for the preparation of gelatin nanoparticles which exhibit strong affinity to mineralized surfaces. It has been shown that the degree of alendronate functionalization can be tuned by controlling the glutaraldehyde crosslinking density, the molar ratio between alendronate and glutaraldehyde, as well as the pH of the conjugation reaction. Moreover, it has been shown that the affinity of gelatin nanoparticles to calcium phosphate increases considerably upon functionalization with alendronate. In summary, gelatin nanoparticles have been developed, which exhibit great potential for use in bone-specific drug delivery and regenerative medicine., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The barberry (Berberis vulgaris) extract which is a rich source of anthocyanins was used for spray drying encapsulation with three different wall materials, i.e., combination of maltodextrin and gum Arabic (MD+GA), maltodextrin and gelatin (MD+GE), and maltodextrin (MD). Response Surface Methodology (RSM) was applied for optimization of microencapsulation efficiency and physical properties of encapsulated powders considering wall material type as well as different ratios of core to wall materials as independent variables. Physical characteristics of spray-dried powders were investigated by further analyses of moisture content, hygroscopicity, degree of caking, solubility, bulk and absolute density, porosity, flowability and microstructural evaluation of encapsulated powders. Our results indicated that samples produced with MD+GA as wall materials represented the highest process efficiency and best powder quality; the optimum conditions of microencapsulation process for barberry anthocyanins were found to be the wall material content and anthocyanin load of 24.54% and 13.82%, respectively. Under such conditions, the microencapsulation efficiency (ME) of anthocyanins could be as high as 92.83%., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This article presented a study on the effects of solution properties (i.e., gelatin concentration, alginate concentration, content of alginate solution in the blend solution, and content of acetic acid in the solvent of gelatin solution) on the average diameter of electrospun gelatin/sodium alginate nanofibers, as well as its standard deviation. For this purpose, blend solutions of two natural polymers (gelatin and sodium alginate) were prepared both in the absence and presence of ethanol. Response surface methodology based on a three-level, four-variable Box-Benkhen design was employed to define quadratic relationships between the responses and the solution properties. The individual and interactive effects of the solution properties were determined. Moreover, the adequacy of the models was verified by the validation experiments. Results showed that the average diameters of the resultant nanofibers were 68-166 nm and 90-155 nm in the absence and presence of ethanol, respectively. The experimental results were in good agreement with the predicted response values. Hence, this study provides an overview on the fabrication of gelatin/sodium alginate nanofibers with targeted diameter, which may have potential to be used in the field of tissue engineering., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In humans, high level of collagen remodeling is seen during normal physiological events such as bone renewal, as well as in pathological conditions, such as arthritis, tumor growth and other chronic wounds. Our lab recently discovered that collagen mimetic peptide (CMP) is able to hybridize with denatured collagens at these collagen remodeling sites with high affinity. Here, we show that the CMP's high binding affinity to denatured collagens can be utilized to deliver angiogenic signals to scaffolds composed of heat-denatured collagens (gelatins). We first demonstrate hybridization between denatured collagens and QKCMP, a CMP with pro-angiogenic QK domain. We show that high levels of QKCMP can be immobilized to a new artificial matrix containing both fibrous type I collagen and heat denatured collagen through triple helix hybridization, and that the QKCMP is able to stimulate early angiogenic response of endothelial cells (ECs). We also show that the QKCMP can bind to excised tissues from burn injuries in cutaneous mouse model, suggesting its potential for promoting neovascularization of burn wounds., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The current study presents an effective and simple strategy to obtain stable porous scaffolds from gelatin via a gas foaming method. The technique exploits the intrinsic foaming ability of gelatin in the presence of CO2 to obtain a porous structure stabilised with glutaraldehyde. The produced scaffolds were characterised using physical and mechanical characterisation methods. The results showed that gas foaming may allow the tailoring of the 3-dimensional structure of the scaffolds with an interconnected porous structure. To assess the effectiveness of the preparation method in mitigating the potential cytotoxicity risk of using glutaraldehyde as a crosslinker, direct and in-direct cytotoxicity assays were performed at different concentrations of glutaraldehyde. The results indicate the potential of the gas foaming method, in the preparation of viable tissue engineering scaffolds., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The effect of transglutaminase (TGase) on the properties of tilapia scale gelatin films in the presence of soy protein isolate (SPI) was investigated. When 3% TGase was added into gelatin films, the total soluble matter and protein solubility of films were decreased from 89.36% and 92.78% to 35.83% and 40.05%, respectively, and the decline was promoted by adding 5% SPI. The strength of the films was increased by adding 1% TGase irrespective of SPI addition, but decreased when the TGase concentration was further raised. No obvious colour change was observed in the films with or without TGase and SPI. Based on the results of SDS-PAGE, DSC and SEM, it was revealed that the movement of low molecular weight hydrophilic protein was depressed by the cross-linking network structure induced by TGase and SPI during film drying, indicating that adding SPI is essential to improve the thermal stability and water resistance properties of TGase-induced gelatin films., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Hydroxyapatite-chitosan/gelatin (HA:Chi:Gel) nanocomposite scaffold has potential to serve as a template matrix to regenerate extra cellular matrix of human bone. Scaffolds with varying composition of hydroxyapatite, chitosan, and gelatin were prepared using lyophilization technique where glutaraldehyde (GTA) acted as a cross-linking agent for biopolymers. First, phase pure hydroxyapatite-chitosan nanocrystals were in situ synthesized by coprecipitation method using a solution of 2% acetic acid dissolved chitosan and aqueous solution of calcium nitrate tetrahydrate [Ca(NO3)2,4H2O] and diammonium hydrogen phosphate [(NH4)2H PO4]. Keeping solid loading constant at 30 wt% and changing the composition of the original slurry of gelatin, HA-chitosan allowed control of the pore size, its distribution, and mechanical properties of the scaffolds. Microstructural investigation by scanning electron microscopy revealed the formation of a well interconnected porous scaffold with a pore size in the range of 35-150 μm. The HA granules were uniformly dispersed in the gelatin-chitosan network. An optimal composition in terms of pore size and mechanical properties was obtained from the scaffold with an HA:Chi:Gel ratio of 21:49:30. The composite scaffold having 70% porosity with pore size distribution of 35-150 μm exhibited a compressive strength of 3.3-3.5 MPa, which is within the range of that exhibited by cancellous bone. The bioactivity of the scaffold was evaluated after conducting mesenchymal stem cell (MSC) - materials interaction and MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay using MSCs. The scaffold found to be conducive to MSC's adhesion as evident from lamellipodia, filopodia extensions from cell cytoskeleton, proliferation, and differentiation up to 14 days of cell culture.

Gelatin scaffolds incorporating or not 50 wt% of magnesium calcium phosphate (MCP) or β-tricalcium phosphate (βTCP) were prepared and the in vitro osteogenic differentiation of rat bone marrow mesenchymal stem cells (MSCs) in the scaffolds was investigated. The pore sizes of the scaffolds were in the range 123.8 ± 47.2-153 ± 60.72 µm in diameter, while the porosity was 33.3 ± 2-44.9 ± 3.4%. The compression modulus of the sponges was about 2.04-2.24 mPa. There was no significant difference among groups regarding the physical and mechanical properties. When seeded into the sponges by an agitation method, the MSCs were distributed throughout the scaffold. Higher MSC proliferation was observed for scaffolds incorporating minerals. Following the incubation of MSCs in scaffolds incorporating MCP, the alkaline phosphatase activity was significantly higher at weeks 2, 3 and 4 in comparison with other scaffolds; however, the osteocalcin levels of MSCs did not show significant differences among groups. These findings indicate that MSCs seeded in scaffolds incorporating MCP showed significantly superior biological results in terms of proliferation and osteogenic differentiation in comparison with other scaffold types., (Copyright © 2012 John Wiley & Sons, Ltd.)

This study proposes a novel method for improving surface hydrophobicity of glycerol plasticized high amylose (HAG) films. We used polyethylene glycol isocyanate (PEG-iso) crosslinker to link HAG and three natural waxes (beeswax, candelilla wax and carnauba wax) to produce HAG+wax+PEG-iso films. The spatial distributions of wax and PEG-iso across the thickness of these films were determined using Synchrotron-based Fourier transform infrared spectroscopy. The hydrophobicity and surface morphology of the films were determined using contact angle (CA) and scanning electron microscopic measurements, respectively. The distribution patterns of wax and the PEG-iso across the thickness of the film, and the nature of crystalline patterns formed on the surface of these films were found to be the key factors affecting surface hydrophobicity. The highest hydrophobicity (CA >90°) was created when the PEG-iso was primarily distributed in the interior of the films and a hierarchical circular pinnacle structure of solidified wax was formed on the surface., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Microtissues on the scale of several hundred microns are a promising cell culture configuration resembling the functional tissue units in vivo. In contrast to conventional cell culture, handling of microtissues poses new challenges such as medium exchange, purification and maintenance of the microtissue integrity. Here, we developed magnetic microcryogels to assist microtissue formation with enhanced controllability and robustness. The magnetic microcryogels were fabricated on-chip by cryogelation and micro-molding which could endure extensive external forces such as fluidic shear stress during pipetting and syringe injection. The magnetically controllable microtissues were applied to constitute a novel separable 3D co-culture system realizing functional enhancement of the hepatic microtissues co-cultured with the stromal microtissues and easy purification of the hepatic microtissues for downstream drug testing. The magnetically controllable microtissues with pre-defined shapes were also applied as building blocks to accelerate the tissue assembly process under magnetic force for bottom-up tissue engineering. Finally, the magnetic microcryogels could be injected in vivo as cell delivery vehicles and tracked by MRI. The injectable magnetic microtissues maintained viability at the injection site indicating good retention and potential applications for cell therapy. The magnetic microcryogels are expected to significantly promote the microtissues as a promising cellular configuration for cell-based applications such as in drug testing, tissue engineering and regenerative therapy.

Physico-chemical and mechanical properties of cuttlefish skin gelatin (G), chitosan (C) from shrimp (Penaeus kerathurus) and composite films (G75/C25, G50/C50, G25/C75) plasticized with glycerol were investigated. The results indicated that chitosan film had higher tensile strength and lower elongation at break when compared with the other films. Composite films show no significant difference in tensile strength (TS), thickness and transparency. The structural properties evaluated by FTIR and DSC showed total miscibility between both polymers. DSC scans showed that the increase of chitosan content in the composite films increases the transition temperature (Tg) and enthalpy (ΔHg) of films. The morphology study of gelatin, chitosan and composite films showed a compact and homogenous structure. In addition, gelatin and G75/C25 films demonstrated a high antioxidant activities monitored by β-carotene bleaching, DPPH radical-scavenging and reducing power activities, while films contained chitosan exhibited higher antimicrobial activity against Gram-positive than Gram-negative bacteria., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Bacterial cellulose (BC) has become established as a remarkably versatile biomaterial and can be used in a wide variety of applied scientific applications, especially for medical devices. In this work, the bacterial cellulose fermentation process is modified by the addition of hyaluronic acid and gelatin (1% w/w) to the culture medium before the bacteria is inoculated. Hyaluronic acid and gelatin influence in bacterial cellulose was analyzed using Transmission Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Adhesion and viability studies with human dental pulp stem cells using natural bacterial cellulose/hyaluronic acid as scaffolds for regenerative medicine are presented for the first time in this work. MTT viability assays show higher cell adhesion in bacterial cellulose/gelatin and bacterial cellulose/ hyaluronic acid scaffolds over time with differences due to fiber agglomeration in bacterial cellulose/gelatin. Confocal microscopy images showed that the cell were adhered and well distributed within the fibers in both types of scaffolds.

The effect of anionic surfactants on the interfacial compatibility in mono epoxy terminated polydimethylsiloxane (PDMS-E) macromonomer and gelatin mixed system was studied by Gibbs free energy (ΔGM), which played a crucial role in deciding the grafting density of immiscible polymer in heterogeneous system. Aggregation behavior of gelatin chains at boundary between gelatin phase and solvent phase was investigated using viscosity, surface tension and conductivity measurements. Viscosity analysis showed a regular increase in viscosity with the increasing alkyl chain length from C7 to C16 of the homologous alkyl sulfate surfactants. Changes of surface tension exhibited the regular curves of polyelectrolyte-anionic surfactant for alkyl sulfate surfactant systems. The results demonstrated that aggregate structure of gelatin-sulfate surfactants was dominated by electrostatic and hydrophobic interactions, which resulted in a self-assembly process of the hydrophobic segments and hydrophilic segments among gelatin chains and surfactant molecules. However, the interactions between gelatin and alkyl sulfonate surfactants were mainly governed by hydrophobic interactions, which induced conformation change of gelatin molecules. Well-ordered arrangement of gelatin chains at a fluid interface has observed by high-resolution transmission electron microscopy (HR-TEM). It is a key factor to contribute to the reduction of interfacial free energy, which mainly depends on the hydrophobic interaction between gelatin and alkyl sulfate/sulfonate surfactants. MD simulations conclusions are great agreement with our experimental results., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Purpose: To develop and characterize microparticles containing fluoride sources (FS) from sodium fluoride, sodium monofluorophosphate (MFP) or aminofluoride and evaluate their characteristics as fluoride delivery systems., Methods: Ethylcellulose microparticles containing fluoride (EM) were prepared by emulsification of ethyl acetate dispersion containing polymer and FS (ethylcellulose:FS ratio of 1:0.25 wt/wt) with aqueous external phase containing polysorbate 80 (0.8% vol/vol) using the volume ratio (organic:aqueous) of 1:5. The organic solvent was evaporated; microparticles were collected by centrifuging, washed with deionized water and freeze-dried. Gelatin microparticles containing FS (GM) was obtained by dispersion of the natural polymer in water, adding FS (6:1 wt/wt) and 20% (wt/wt) of mannitol. The final dispersions were spray-dried. Particle morphology and size were investigated using optical microscopy. The content of fluoride ions in the microparticles was quantified using a potentiometric method. The encapsulation efficiency and in vitro release profile of fluoride was also determined., Results: Microparticles exhibited polydispersity and mean diameters <145.35 and <124.22 µm for EM and GM, respectively. Considering the entrapment efficiency, the spray-drying technique exhibited greater values than microencapsulation by emulsification and solvent evaporation. The release profile of fluoride ions from microparticles was shown to be modified, fitted first order and guided by Fickian diffusion., Conclusions: Microparticles prepared with ethylcellulose or gelatin can be used as platform for oral delivery of fluoride, providing a means to increase the local supply of this ion in a controlled manner, providing an increased protection against caries. Moreover, further investigations are needed to demonstrate this property in vivo.

Aims: To assess the antibacterial efficacy of new composite materials developed from microparticles of 45S5 bioactive glass (BG) and agar-gelatin films., Methods and Results: In vitro antibacterial activity was evaluated against Staphylococcus spp. because of the importance of this pathogen in damaged tissues and in failures associated with biomaterial implants. To our knowledge, this is the first paper reporting on the suitable combination of BG and agar-gelatin for bioactive and antibacterial films. Bacterial suspensions up or below 10(5) CFU ml(-1) reflecting situations of wound infection and of noninfection, respectively, were prepared and then put in contact with the biomaterials at 37°C. After 24 and 48 h of incubation, the pH value was measured and the staphylococci strains viability was determined by counting in Mueller-Hinton agar plates. Moreover, the biomaterials were prepared for observation under scanning electron microscopy (SEM). Biocomposites (BCs) showed a strong antibacterial effect against all staphylococci strains tested. Some differences were found depending on the strain, the inoculum size and the contact time. This effect was correlated with an alkalinization of the media. By SEM analyses, no bacterial presence was observed on the surface of BCs in any of the cell concentrations tested at any time., Conclusions: Overall, the coating of 45S5 BG on agar-gelatin films promoted BCs with strong antistaphylococcal activity. The effect was efficient under bacterial concentration up or below 10(5) CFU ml(-1). Additionally, none of the strains were found on BCs surfaces., Significance and Impact of Study: 45S5 bioglass/agar-gelatin biocomposite films are reported for the first time. The results suggest a potential application as wound dressing., (© 2013 The Society for Applied Microbiology.)

Background: Surgical hemostasis is achieved using adjunctive hemostats when conventional methods fail., Objective: This study compares the effectiveness of two adjunctive gelatin-thrombin hemostats., Hypothesis: To determine effectiveness, hemostats were compared in vivo, in vitro, and using scanning electron microscopy (SEM)., Methods: In vivo, a heparinized porcine liver abrasion model was used to compare hemostatic success, degree of bleeding, and blood loss at 2, 5, and 10 minutes post-treatment. In vitro, thrombin in the supernatant of each hemostat and Red Blood Cells (RBC'S) in the supernatant of clots formed by each was compared., Results: Ultrastructure of one gelatin was smooth and the other stellate. In vivo, smooth gelatin provided superior hemostatic success at 5 (85% vs. 60%; OR: 5.3; 95% CI: 1.66 to 17.9) and 10 mins (72.5% vs. 47.5%; OR: 5.0; 95% CI: 1.55 to 16.1). Smooth gelatin had a statistically different degree of bleeding at 5 (0.58 ± 0.87 [Mean ± SD] vs. 1.03 ± 1.12; OR: 3.36; 95% CI: 1.34 to 8.41) and 10 mins (1.13 ± 1.14 vs. 1.65 ± 1.05; OR: 3.87; 95% CI: 1.62 to 9.21). Mean blood loss was less with smooth gelatin at 2 (0.07 ± 0.19 vs. 0.13 ± 0.63 ml/min), 5 (0.04 ± 0.13 vs. 0.23 ± 0.45 ml/min), and 10 mins (0.09 ± 0.24 vs. 0.21 ± 0.32 ml/min). In vitro, supernatant of smooth gelatin had significantly less thrombin (6.81 vs. 10.9 IU/ml, p = .001), and significantly less RBC's than stellate gelatin (0.07 vs. 0.09 × 10(6)/ul, p = .0085)., Conclusion: Smooth gelatin has an increased ability to retain thrombin and RBC's in vitro which may explain why it provides superior hemostatic effectiveness, superior control of bleeding, and greater reduced blood loss in vivo.

In the engineering of soft tissues, designing the scaffolds with adequate strength and controllable biodegradation properties are essential. To fulfill such design criteria gelatin/carbohydrate chitosan (G/CC) scaffolds have gained much attention in engineering replacement of soft tissues. In this research, the influence of different cross-linking methods and parameters with genipin on the physico-chemical properties of G/CC scaffolds was investigated in detail. The scaffolds with different concentrations of G and CC were prepared and cross-linked trough two different methods, and the impact of cross-linker concentration beside of cross-linking time and temperature were fully analyzed. The obtained results suggested that the 1% genipin-cross-linked G60/CC40 scaffolds, prepared at room temperature for 24h through scaffold cross-linking method, could be a promising replacement in missing segments of load-bearing soft tissues. This article describes a systematic study of genipin cross-linking effects on G/CC scaffolds., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Microstructure of gelatin particles played a key role in determining the physicochemical properties of gelatin. Ionic strength and pH as systematic manners were considered to affect gelatin particles structure on the micrometer scale. Scanning electron microscopy was used for depicting the morphologies of gelatin particles. Increasing pH to 10.0 or decreasing pH to 4.0, spherical, spindle, and irregular aggregates of gelatin particles at 2, 6, 10, and 14% solution (w/w) were all transformed to spindle aggregates. When NaCl was added to the system, the molecular chains of gelatin possibly rearranged themselves in a stretched state, and the ribbon aggregates was observed. The structural transitions of gelatin aggregates were strongly depended on the electrostatic repulsion. In the gelatin-sodium dodecyl sulfate (SDS) case, the micrometer scale of aggregates was larger and the different degrees of cross-links were induced through hydrophobic interaction and electrostatic repulsion., (Copyright © 2012 Wiley Periodicals, Inc.)

There has been a considerable interest in recent years in developing polymer gel matrices for many important applications such as 2DE for quantization and separation of a variety of proteins and drug delivery system to control the release of active agents. However, a well-defined knowledge of the ultrastructures of the gels has been elusive. In this study, we report the characterization of two different polymers used in 2DE: Gelatin, a naturally occurring polymer derived from collagen (protein) and agar, a polymer of polysaccharide (sugar) origin. Low-temperature SEM is used to examine the internal structure of these gels in their frozen natural hydrated states. Results of this study show that both polymers have an array of hollow cells that resembles honeycomb structures. While agar pores are almost circular, the corresponding Gaussian curve is very broad exhibiting a range of radii from nearly 370 to 700 nm. Gelatin pores are smaller and more homogeneous reflecting a narrower distribution from nearly 320 to 650 nm. Overall, these ultrastructural findings could be used to correlate with functions of the polymers., (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This work studies the effect of the helix-coil transition in gelatin on the structure development in the complex forming water-gelatin-BSA system using dynamic light scattering, environment scanning electron microscopy, rheometry, differential scanning microcalorimetry, circular dichroism, fluorescence, and absorption measurements. It was established that the structure of the complexes formed and the mechanism of intermacromolecular interaction are different in the case of two conformation states of gelatin. Above the temperature of the conformational transition (40 °C) intermacromolecular interaction leads to collapse gelatin macromolecules and formation compact (30 nm in radius) BSA-gelatin complexes (∼6:1, mole/mole), partial stabilization of the secondary structure (increase the mean helix content), and stabilization of BSA molecules against thermo aggregation. At the same time it does not leads to an appreciable change in the thermodynamic parameters of the thermal transitions for BSA and gelatin. Below the temperature of the conformation transition (at 18 °C) the interaction results in formation of the large (600-1000 nm in radius) complex particles due to trapping BSA molecules into the meshes of the gelatin network and, as consequence, a substantial increase in the storage and loss moduli of the system., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This study focuses on determining the effect of varying the composition and crosslinking of collagen-based films on their physical properties and interaction with myoblasts. Films composed of collagen or gelatin and crosslinked with a carbodiimide were assessed for their surface roughness and stiffness. These samples are significant because they allow variation of physical properties as well as offering different recognition motifs for cell binding. Cell reactivity was determined by the ability of myoblastic C2C12 and C2C12-α2+ cell lines (with different integrin expression) to adhere to and spread on the films. Significantly, crosslinking reduced the cell reactivity of all films, irrespective of their initial composition, stiffness or roughness. Crosslinking resulted in a dramatic increase in the stiffness of the collagen film and also tended to reduce the roughness of the films (R(q) = 0.417 ± 0.035 μm, E = 31 ± 4.4 MPa). Gelatin films were generally smoother and more compliant than comparable collagen films (R(q) = 7.9 ± 1.5 nm, E = 15 ± 3.1 MPa). The adhesion of α2-positive cells was enhanced relative to the parental C2C12 cells on collagen compared with gelatin films. These results indicate that the detrimental effect of crosslinking on cell response may be due to the altered physical properties of the films as well as a reduction in the number of available cell binding sites. Hence, although crosslinking can be used to enhance the mechanical stiffness and reduce the roughness of films, it reduces their capacity to support cell activity and could potentially limit the effectiveness of the collagen-based films and scaffolds., (Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Gold-gelatin bionanocomposite films are prepared by the reduction of gold ions by sodium borohydride in an aqueous solution. It is shown that both the solution and the films on glass substrates contain entrapped hydrogen micro- and nanobubbles with diameters in the range of 200 nm-3 μm. The optical properties of gold nanoparticles in the presence of gelatin and hydrogen nanobubbles are measured and simulated by using the discrete dipole approximation method. The composite films having micro- and nanobubble inclusions have been found to be very stable. The calculated localized surface plasmon resonance band is found in agreement with the experimental band position only when the presence of hydrogen bubbles around the gold nanoparticles is taken into account. The different morphological features engendered by the presence of the bubbles in the film (gelatin receptacles for the nanoparticles, gelatin hemispheres raised by the bubbles under the surface, cavities on the surface of the film, etc) are described in detail and considered for potential applications. This work is highly relevant to the new and exciting topic of nanobubbles on surfaces and interfaces.

Drug delivery is a promising technique to enhance the therapeutic efficacy of the drug. However, properties of carrier materials require intense improvement for effective transport of drug molecules. In the current study, attempts have been made to develop freeze dried gelatin matrices cross linked with genipin at various temperatures (5°C, 15°C and 25°C) prior to freeze-drying (-80°C). The freeze dried matrices thus obtained at the said temperatures are characterized for crosslinking density, compression strength, swelling behaviors. The matrix crosslinked at 25°C showed highest Flory-Rehner crosslinking density (467 ± 46) (p<0.05), highest compressive strength (12.36 ± 0.12) (p<0.05) and lowest equilibrium water content. In this context, scanning electron microscopy (SEM) was performed to study the surface morphology (size and shape of pores) of the crosslinked matrices. These images were further processed for quantitative analysis of morphological features, viz., areas, radius, ferret diameter, length of major and minor axis and eccentricity using MATLAB toolboxes. These quantitative analyses correlate transport and the release kinetics of model anti-inflammatory drug (indomethacin) from crosslinked matrices in vitro to tune as a controllable delivery system. The diffusional exponent (n) for all constructs ranging from 0.61 to 0.69 (p<0.05) (0.45

Scaffolds based on gelatin (G) are considered promising for tissue engineering, able to mimic the natural extracellular matrix. G drawback is its poor structural consistency in wet conditions. Therefore, crosslinking is necessary to fabricate stable G scaffolds. In this work, a comparative study between the performance of two different crosslinkers, genipin (GP) and γ-glycidoxypropyltrimethoxysilane (GPTMS), is presented. Flat membranes by solvent casting and porous crosslinked scaffolds by freeze-drying were prepared. Infrared spectroscopy and thermal analysis were applied to confirm G chain crosslinking. Moreover, GP and GPTMS increased the stability of G in aqueous media and improved the mechanical properties. Crosslinking reduced the wettability, especially in the case of G&#95;GPTMS samples, due to the introduction of hydrophobic siloxane chains. Both G&#95;GP and G&#95;GPTMS scaffolds supported MG-63 osteoblast-like cell adhesion and proliferation., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Blend films based on cuttlefish (Sepia pharaonis) ventral skin gelatin (CG) and mungbean protein isolate (MPI) at different blend ratios (CG/MPI=10:0, 8:2, 6:4, 4:6, 2:8 and 0:10, w/w) prepared at pH 11 using 50% glycerol (based on total protein) as plasticizer were characterized. CG films incorporated with MPI at increasing amounts had the decreases in tensile strength (TS) (p<0.05). The increases in elongation at break (EAB) were observed when CG/MPI ratios of 6:4 or 4:6 were used (p<0.05). Decreased water vapor permeability (WVP) was obtained for films having the increasing proportion of MPI (p<0.05). CG/MPI blend films with higher MPI proportion had lower film solubility and L*-values (lightness) but higher b*-values (yellowness) and ΔE*-values (total color difference) (p<0.05). Electrophoretic study revealed that disulfide bond was present in MPI and CG/MPI blend films. However, hydrogen bonds between CG and MPI in the film matrix were dominant, as elucidated from FTIR spectroscopic analysis. Moreover, thermal stability of CG/MPI blend film was improved as compared to that of films from respective single proteins. Differential scanning calorimetry result suggested solid-state morphology of CG/MPI (6:4) blend film that consisted of amorphous phase of partially miscible CG/MPI mixture and the coexisting two different order phases of individual CG and MPI domains. Thus, the incorporation of MPI into gelatin film could improve the properties of resulting blend film, which were governed by CG/MPI ratio., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The structural properties of collagen have been the subject of numerous studies over past decades, but with the arrival of new technologies, such as the atomic force microscope and related techniques, a new era of research has emerged. Using microthermal analysis, it is now possible to image samples as well as performing localized thermal measurements without damaging or destroying the sample itself. This technique was successfully applied to characterize the thermal response between native collagen fibrils and their denatured form, gelatin. Thermal transitions identified at (150 ± 10)°C and (220 ± 10)°C can be related to the process of gelatinization of the collagen fibrils, whereas at higher temperatures, both the gelatin and collagen samples underwent two-stage transitions with a common initial degradation temperature at (300 ± 10)°C and a secondary degradation temperature of (340 ± 10)°C for the collagen and of (420 ± 10)°C for the gelatin, respectively. The broadening and shift in the secondary degradation temperature was linked to the spread of thermal degradation within the gelatin and collagen fibrils matrix further away from the point of contact between probe and sample. Finally, similar measurements were performed inside a bone resorption lacuna, suggesting that microthermal analysis is a viable technique for investigating the thermomechanical response of collagen for in situ samples that would be, otherwise, too challenging or not possible using bulk techniques., (Copyright © 2011 Biophysical Society. Published by Elsevier Inc. All rights reserved.)