Search

The realization of non-close-packed nanoscale patterns with multiple feature sizes and length scales via colloidal self-assembly is a highly challenging task. We demonstrate here the creation of a variety of tunable particle arrays by harnessing the sequential self-assembly and deposition of two differently sized microgel particles at the fluid-fluid interface. The two-step process is essential to achieve a library of 2D binary colloidal alloys, which are kinetically inaccessible by direct co-assembly. These versatile binary patterns can be exploited for a range of end-uses. Here we show that they can for instance be transferred to silicon substrates, where they act as masks for the metal-assisted chemical etching of binary arrays of vertically aligned silicon nanowires (VA-SiNWs) with fine geometrical control. In particular, continuous binary gradients in both NW spacing and height can be achieved. Notably, these binary VA-SiNW platforms exhibit interesting anti-reflective properties in the visible range, in agreement with simulations. The proposed strategy can also be used for the precise placement of metallic nanoparticles in non-close-packed arrays. Sequential depositions of soft particles enable therefore the exploration of complex binary patterns, e.g. for the future development of substrates for biointerfaces, catalysis and controlled wetting.

Near-equilibrium stimulus-responsive polymers have been used extensively to introduce morphological variations in dependence of adaptable conditions. Far-less-well studied are triggered transformations at constant conditions. These require the involvement of metastable states, which are either able to approach the equilibrium state after deviation from metastability or can be frozen on returning from nonequilibrium to equilibrium. Such functional nonequilibrium macromolecular systems hold great promise for on-demand transformations, which result in substantial changes in their material properties, as seen for triggered gelations. Herein, a diblock copolymer system consisting of a hydrophilic block and a block that is responsive to both pressure and temperature, is introduced. This species demonstrates various micellar transformations upon leaving equilibrium/nonequilibrium states, which are triggered by a temperature deflection or a temporary application of hydrostatic pressure., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Controlling the microstructure of monolayers of microgels confined at a water/oil interface is the key to their successful application as nanolithography masks after deposition on a solid substrate. Previous work demonstrated that compression of the monolayer can be used to tune the microgel arrangement and to explore the full two-dimensional area-pressure phase diagram of the particles trapped at the interface. Here, we explore a new size range, using microgels with 210 nm and 1.45 μm bulk diameters, respectively. We start by investigating the properties of isolated particles in situ at the interface by freeze-fracture cryo-SEM, and after deposition using an atomic force microscope. We then study their collective behavior in a compressed monolayer and highlight significant differences in terms of the accessible structural phases and their transitions. More specifically, the larger microgels behave similar to colloids with a hard core and a soft polymeric shell, exhibiting capillarity driven clustering at a large specific area and a solid-solid phase transition between two hexagonal lattices at higher compressions. The smaller particles instead show no aggregation and a smooth transition from a hexagonal lattice to a dense disordered monolayer. Finally, we demonstrate that the larger microgels can be effectively turned into masks for the fabrication of vertically aligned silicon nanowires by means of metal-assisted chemical etching. These findings highlight the subtle interplay between particle architecture, adsorption and interactions at the interface, the understanding and harnessing of which are at the basis of their successful use as nanopatterning tools.

We have studied the complete two-dimensional phase diagram of a core-shell microgel-laden fluid interface by synchronizing its compression with the deposition of the interfacial monolayer. Applying a new protocol, different positions on the substrate correspond to different values of the monolayer surface pressure and specific area. Analyzing the microstructure of the deposited monolayers, we discovered an isostructural solid-solid phase transition between two crystalline phases with the same hexagonal symmetry, but with two different lattice constants. The two phases corresponded to shell-shell and core-core inter-particle contacts, respectively; with increasing surface pressure the former mechanically failed enabling the particle cores to come into contact. In the phase-transition region, clusters of particles in core-core contacts nucleate, melting the surrounding shell-shell crystal, until the whole monolayer moves into the second phase. We furthermore measured the interfacial rheology of the monolayers as a function of the surface pressure using an interfacial microdisk rheometer. The interfaces always showed a strong elastic response, with a dip in the shear elastic modulus in correspondence with the melting of the shell-shell phase, followed by a steep increase upon the formation of a percolating network of the core-core contacts. These results demonstrate that the core-shell nature of the particles leads to a rich mechanical and structural behavior that can be externally tuned by compressing the interface, indicating new routes for applications, e.g. in surface patterning or emulsion stabilization.

We demonstrate a fabrication breakthrough to produce large-area arrays of vertically aligned silicon nanowires (VA-SiNWs) with full tunability of the geometry of the single nanowires and of the whole array, paving the way toward advanced programmable designs of nanowire platforms. At the core of our fabrication route, termed "Soft Nanoparticle Templating", is the conversion of gradually compressed self-assembled monolayers of soft nanoparticles (microgels) at a water-oil interface into customized lithographical masks to create VA-SiNW arrays by means of metal-assisted chemical etching (MACE). This combination of bottom-up and top-down techniques affords excellent control of nanowire etching site locations, enabling independent control of nanowire spacing, diameter and height in a single fabrication route. We demonstrate the fabrication of centimeter-scale two-dimensional gradient photonic crystals exhibiting continuously varying structural colors across the entire visible spectrum on a single silicon substrate, and the formation of tunable optical cavities supported by the VA-SiNWs, as unambiguously demonstrated through numerical simulations. Finally, Soft Nanoparticle Templating is combined with optical lithography to create hierarchical and programmable VA-SiNW patterns.

We investigate the influence of a solid core and of the cross-link density on the compression of microgel particles at oil-water interfaces by means of compression isotherms and computer simulations. We investigate particles with different morphology, namely core-shell particles containing a solid silica core surrounded by a cross-linked polymer shell of poly(N-isopropylacrylamide), and the corresponding hollow microgels where the core was dissolved. The polymer shell contains different amounts of cross-linker. The compression isotherms show that the removal of the core leads to an increase of the surface pressure at low compression, and the same effect can be observed when the polymer cross-link density is decreased. Low cross-link density and a missing core thus facilitate spreading of the polymer chains at the interface and, at high compression, hinder the transition to close hexagonal packing. Furthermore, the compression modulus only depends on the cross-link density at low compression, and no difference can be observed between the core-shell particles and the corresponding hollow microgels. It is especially remarkable that a low cross-link density leads to a high compression modulus at low compression, while this behavior is reversed at high compression. Thus, the core does not influence the particle behavior until the polymer shell is highly compressed and the core is directly exposed to the pressure. This is related to an enhanced spreading of polymer chains at the interface and thus high adsorption energy. These conclusions are fully supported by computer simulations which show that the cross-link density of the polymer shell defines the degree of deformation at the interface. Additionally, the core restricts the spreading of polymer chains at the interface. These results illustrate the special behavior of soft microgels at liquid interfaces.

Microgel-covered interfaces, e.g., in emulsions, have attracted much interest lately. Different imaging techniques have been used to image these interfaces, either flat or curved, to investigate their properties and appearance. Techniques such as cryogenic scanning electron microscopy (cryo-SEM) and confocal microscopy have provided valuable insight into microgel-covered systems but still have some disadvantages such as part of the microgels being trapped in vitrified liquid or the need for fluorescent markers. Some of these disadvantages can be overcome by using transmission X-ray microscopy (TXM), which has the advantage of allowing the investigation of adsorbed and free microgels simultaneously. We used TXM to acquire tomographic image series of microgel-covered droplets and calculated 3D reconstructions from these image stacks. As a result, we could show that microgels deform anisotropically and penetrate the oil droplets in the hydrated state. Additionally, 3D reconstruction gives an idea of the arrangement of microgels adsorbed to oil droplets and reveals that droplet stabilization is possible without full coverage of the interface with polymer segments.

Monolayers of micro- and nanoparticles at fluid interfaces are a key component in a variety of applications, ranging from particle lithography to stabilizers in foams or emulsions. In addition to commonly used "hard" colloids, soft polymeric particles like microgels are attracting increasing attention due to their potential in the fabrication of tailored and responsive assemblies. In particular, regular hexagonal arrays of microgels have been previously deposited after assembly at a fluid interface. While the arrangement cannot be easily controlled after adsorption and self-assembly from the bulk phase, specific structures can be achieved by compressing an interfacial microgel monolayer spread in a Langmuir trough and by transferring it onto substrates at distinct compression states. The degree of ordering after compression surpasses the one that is reached after self-assembly from the bulk and is, in general, independent from the presence of charges and different microgel morphologies. As a consequence, by monitoring the surface pressure during compression it is possible to produce highly ordered microgel arrays where the interparticle distance can be systematically and externally controlled.

The aim of this paper is to determine how microgels adsorb at a model oil-water interface and how they adapt their conformation to compression, which gives rise to surface elasticity depending on the microgel packing. The structure of the film is determined by the Langmuir films approach (forced compression) and compared to spontaneous adsorption using the pendant drop method. The behaviour of microgels differs significantly from that of non-deformable particles but resembles that of linear polymers or proteins. We also correlate the properties of microgels spontaneously adsorbed at model interfaces to their forced adsorption during emulsification. Finally we propose a route to easily control a posteriori the microgel packing at the surface of droplets and the flow properties of emulsions stabilised by the microgels.

The water-soluble tin(IV) porphyrin dichlorido-5,10,15,20-tetrakis(p-carboxyphenyl)-porphyrinato-tin(IV) (SnTPPC, 1) was synthesised as a mimic of biological chlorophyll photosensitisers. In natural photosynthesis, chlorophyll pigments start the multi-electron transfer processes resulting in water-oxidation and NADP(+)-reduction. The photochemical properties of compound 1 were characterised by measuring absorption and fluorescence spectra. Electrochemical measurements in water revealed well-suited redox potentials of 1 for both proton-reduction to H2 as well as water-oxidation to O2. The tin(IV) porphyrin was then used as a photosensitiser in model systems for light-induced proton-reduction in aqueous solution, where an optimization of the experimental conditions was carried out to achieve reaction rates comparable to those found for [Ru(bipy)3](2+), a standard dye in artificial photosynthesis. By employing UV/Vis-spectroelectrochemistry, we found that the porphyrin ligand of 1 is redox non-innocent in water. A complex set of reduction reactions of the porphyrin macrocycle occurs during photocatalytic experiments involving the ligand's chlorin form as a key intermediate. On the basis of these results, a potential reaction sequence for light-driven H2-formation is formulated, where the reductive quenching of 1 forms the initial reaction step and reduced forms of 1 serve as hydride transfer agents to the H2 evolution catalyst. The spectroscopic, electrochemical and catalytic properties of SnTPPC make this compound class an attractive, affordable and easily accessible choice for photosensitisers in artificial photosynthetic systems. Finally, the detected complicated redox reactions of the porphyrin ring in water offer a possible explanation of why the chlorophylls of P680 or P700 are carefully wrapped in a water-free part of the PSII and PSI proteins.

pH-responsive microgels are unique stabilizers for stimuli-sensitive emulsions that can be broken on demand by changing the pH value. However, recent experiments have indicated that electrostatic interactions play a different role to that in conventional Pickering emulsions. The influence of charges on the interactions between microgels at the oil-water interface is now described. Compression isotherms of microgels with different charge density and architecture were determined in a Langmuir trough, and counter-intuitive results were obtained: Charged microgels can be compressed more easily than uncharged microgels. The compressibility of microgels is thus not determined by direct Coulomb repulsion. Instead, the different swelling of the microgels in the charged and the uncharged states is proposed to be the key parameter., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Risk-taking behavior involves making choices with uncertain positive or negative outcomes. Evidence suggests that risk-taking behavior is influenced by emotional state. One such emotional experience is social anxiety, which has been related to both risk-avoidant and risk-seeking decision making. The present study examined a community sample of 34 adolescents grouped into low (Low SA Group) and high (High SA Group) social anxiety (SA). Both groups were compared on changes in performance on a risk taking task (Balloon Analogue Risk Task) between a social threat condition (modified Trier Social Stress Test, High Stress) and a control condition (Low Stress). These conditions were administered on different days, and the order was counterbalanced across subjects. A group×condition interaction revealed that the High SA Group showed greater risk-taking behavior when exposed to the High Stress Condition compared to the Low Stress Condition, while the Low SA Group evidenced no difference between the two conditions. Interpretations for the increased risk behavior under the condition of social stress for those high in social anxiety are discussed as well as implications for understanding the complex relationship between social anxiety and risk behavior., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Responsive microgels are deformable submicrometer cross-linked polymeric hydrogel particles that are used as a novel class of emulsion stabilizers. Their flexibility and the triggering of conformational changes by external stimuli lead to several advantages compared to rigid particles used in conventional Pickering emulsions. Despite their rapidly increasing use, several key aspects relating to microgel microstructure and localization at liquid interfaces are still unexplored. We present here a novel characterization that employs freeze-fracture shadow-casting cryo-SEM to disclose quantitative 3D information on the deformation and protrusion of microgels at water/oil interfaces. Despite the bulk pH response (swelling), we report here the unexpected absence of size and vertical position changes as a function of pH at liquid interfaces and interpret the results using simple arguments that link the particle interfacial activity, solvation, and internal deformation. These results pave the way to a deeper understanding of a novel class of soft materials.