Search

Palladium-based nanoparticles immobilized in polymeric matrices were applied to the reductive dechlorination of 3,3',4,4'-tetrachlorobiphenyl (PCB77) at room temperature. Two different dechlorination platforms were evaluated using (1) Pd nanoparticles within conductive polypyrrole films; or (2) immobilized Fe/Pd nanoparticles within polyvinylidene fluoride microfiltration membranes. For the first approach, the polypyrrole film was electrochemically formed in the presence of perchlorate ions that were incorporated into the film to counter-balance the positive charges of the polypyrrole chain. The film was then incubated in a solution containing tetrachloropalladate ions, which were exchanged with the perchlorate ions within the film. During this exchange, reduction of tetrachloropalladate by polypyrrole occurred, which led to the formation of palladium nanoparticles within the film. For the second approach, the membrane-supported Fe/Pd nanoparticles were prepared in three steps: polymerization of acrylic acid in polyvinylidene fluoride microfiltration membrane pores was followed by ion exchange of Fe(2+), and then chemical reduction of the ferrous ions bound to the carboxylate groups. The membrane-supported iron nanoparticles were then soaked in a solution of tetrachloropalladate resulting in the deposition of Pd on the Fe surface. The nanoparticles prepared by both approaches were employed in the dechlorination of PCB77. The presence of hydrogen was required when the monometallic Pd nanoparticles were employed. The results indicate the removal of chlorine atoms from PCB77, which led to the formation of lower chlorinated intermediates and ultimately biphenyl. Toxicity associated with vascular dysfunction by PCB77 and biphenyl was compared using cultured endothelial cells. The data strongly suggest that the dechlorination system used in this study markedly reduced the proinflammatory activity of PCB77, a persistent organic pollutant.

Quantitative determinations of ions in a variety of media have been performed traditionally via one of three approaches: optical instrumental methods (e.g., atomic absorption, and inductively-coupled plasma-optical emission or mass spectrometry), "wet" methods, or ion-selective sensors. Each of the approaches, though, possesses limitations including: power/reagent consumption and lack of portability for instrumental techniques; laborious sample-treatment steps for wet methods; and lack of selectivity and sensitivity with sensors when employed with complex samples. Microfluidic device have emerged as a solution to some of these challenges associated with ion analysis. Such systems can integrate multiple sample handling, calibration, and detection steps ("lab-on-a-chip" concept) into a footprint amenable to portability, while requiring small amounts of sample and power. Furthermore, devices can be constructed for multi-analyte detection, either through multiple parallel fluidic architectures or by using arrays of detection elements. This paper reviews recent progress in the development of total-analysis systems for ionic species. Fabrication techniques and various fluid-handling operations are discussed briefly, followed by a number of more mature strategies for microfluidic ion analysis. A variety of approaches expected to comprise the next generation of devices are also presented.

Exposure to specific congeners of polychlorinated biphenyls (PCBs) can induce proinflammatory alterations, which may contribute to the formation of blood-borne tumor metastasis. The main aim of the present study was to establish an experimental model of PCB exposure in which PCBs are administered by oral gavage, which resembles the human exposure through the food chain. To determine structure-function relationship, we studied induction of inflammatory responses in the livers, lungs and brains of mice treated with PCB77 (a major coplanar PCB), PCB104 (a non-coplanar PCB with multiple ortho-chlorine substituents), and PCB153 (a major non-coplanar PCB) after a single gavage dose (150 µmol/kg body weight). The strongest expression of proinflammatory proteins occurred 24 h following the PCB administration independent of the class of PCB congeners. These data indicate that food-chain exposure to PCBs can induce proinflammatory mediators in organs that are potential targets for PCB-induced toxicity.

An array of four sensing microdome optodes (potassium, sodium, calcium, and chloride) was incorporated into a centrifugal microfluidics platform to obtain a multiion analysis system. The behavior of each sensing microdome was in good agreement with a theoretical model describing the response. The selectivity of each optode over common interfering ions was established and was used to identify calibrant solutions that can be employed for the simultaneous calibration of all four optodes without significant cross-interference. The microfluidic platform was designed to facilitate both three-point calibration of the optodes and triplicate analysis of a sample within a single run, which increases the accuracy of the determination. The optimized microfluidic system was used to determine simultaneously the concentration of potassium, sodium, calcium, and chloride in aquarium water (with the composition of Lake Tanganyika water) with less than 6% error. The simple process of fabrication of these microdomes and their incorporation into a centrifugal microfluidic platform should facilitate the development of portable ion-sensing analysis systems.

A self-contained ion-selective sensing system within a nanoliter-volume vial has been developed by integrating screen printing, laser ablation, and molecular imprinting techniques. Screen printing and laser ablation are used in tandem to fabricate nanoliter-volume vials with carbon and Ag/AgCl ring electrodes embedded in the sidewalls. Using multisweep cyclic voltammetry, the surface of the carbon electrode can be modified with a polypyrrole film. By polymerizing pyrrole in the presence of nitrate, pores complementary to the nitrate anion in size, shape, and charge distribution are formed in the resulting film. Electrochemical cells modified with this nitrate-imprinted polypyrrole film show a near-Nernstian response to nitrate, and excellent reproducibility. The integration of molecular recognition and electrochemical response in the nanoliter vials is demonstrated by the detection of as little as 0.36 ng nitrate in nanoliter-volume samples. The integration of tailored molecular recognition within nanoliter vials via established fabrication and imprinting protocols should result in a number of nanosensor devices with applications in BioMEMS and micro total analysis systems.

Poly(amino acids) are natural chelating agents for various metal ions. Zinc ions were encapsulated in situ in a conductive polypyrrole film using polyglutamic acid as a localized complexing agent within the film. The subsequent electrochemical reduction of the metal ions to zero-valent metal leads to the formation of the nanoparticles. The electrochemical approach demonstrated in this report provides facile regeneration of the particles and also prevents aggregation of nanoparticles in the conductive polymeric film. The correlation of the amount of zinc with the thickness of the film indicates that the zinc resides largely in the outer layer of the film. TEM and EDS data show that the nanoparticles formed are composed of zinc and are 18 +/- 7 nm in diameter. The nanoparticle/ polymer composite was used to reduce halogenated organics, indicating its potential usefulness in remediation applications.

Optode sensing membranes employing decyl methacrylate cross-linked with 1,6-hexanediol dimethacrylate as the polymer support were fabricated by a direct microspotting method on several surfaces. Photopolymerization was used to attach the microspots to the substrate. Using this method, diameters in the micrometer domain were obtained. Silanized glass, poly(methyl methacrylate) (PMMA), polycarbonate, and poly(dimethylsiloxane) were tested as possible substrates. Both polypropylene tips and the steel tips of drafting pens were used for spotting. It was determined that both silanized glass and PMMA gave working optodes, but the ones on PMMA did not fit the theoretical model. Diameters of 994 +/- 80 and 1279 +/- 85 microm were obtained on silanized glass and PMMA, respectively, using the polypropylene tips for spotting. Different size optodes were fabricated using 0.35- and 0.50-mm steel drafting pen tips. The 0.35-mm tips produced diameters of 895 +/- 26 and 688 +/- 54 microm on silanized glass and PMMA, respectively, and the 0.50-mm tips produced diameters of 1274 +/- 94 microm on silanized glass and 839 +/- 28 microm on PMMA. Thus, the microspot size can be controlled based on the hydrophobicity of the surface and the size of the tip used for spotting. Calibration plots of potassium optode microspots indicated that miniaturization does not alter response characteristics, such as selectivity, response time, and dynamic range, of the optodes.

In vivo monitoring of various analytes is important for many bioanalytical and biomedical applications. The crucial challenge in this type of applications is the interaction of the sensor with the host environment, which is qualitatively described by the term biocompatibility. This review discusses recent advances in methods and materials used for the improvement of the biocompatibility of ion-selective electrodes especially as it relates to their interaction with blood components.

A novel biotinylated fullerene has been synthesized to facilitate the attachment of biotin-conjugated proteins to C(60) through the use of streptavidin as a molecular adapter. The strong biotin-streptavidin interaction enables the attachment of fullerenes to streptavidin and, because of the availability of four biotin-binding sites on streptavidin, to biotinylated biomolecules. The feasibility of this approach is demonstrated by using biotinylated alkaline phosphatase. Due to the insolubility of fullerenes in aqueous media, the immobilized enzyme can be eventually recovered by simple centrifugation with no significant loss in activity.

A new approach to the modification of carbon nanotubes with biomolecules for the development of nanoscale biosensors is presented. Alkaline phosphatase was immobilized on the surface of multi-wall carbon nanotubes utilizing a layer-by-layer methodology. Carbon nanotubes were incubated with streptavidin, resulting in the formation of a protein layer on the surface of the nanotubes. Biotinylated alkaline phosphatase was then allowed to bind to streptavidin, anchoring the sensing protein onto the surface. Electrochemical biosensors were constructed by using carbon nanotubes compacted into pellets. 1-Naphthyl phosphate, which is hydrolyzed by alkaline phosphatase to the electroactive 1-naphthol, was used as a substrate. Electrodes constructed in this manner were observed to generate an electrochemical signal that was a function of substrate concentration.

A new type of composite material based on carbon nanotubes and an aqueous sol-gel process has been developed. The electrochemical characteristics of these composites were investigated and compared to composites made with an alkoxy silane sol-gel process. The use of carbon nanotubes, as the conductive part of the composite, facilitated fast electron transfer rates. The feasibility of this type of composite for the development of biosensors was demonstrated using l-amino acid oxidase. The stability of the enzyme was increased when it was encapsulated in the aqueous sol-gel, and the sensor retained more that 50% of its response after 1 month of testing.

Nanoscale carbon materials (i.e., fullerenes and nanotubes) are an attractive platform for applications in biotransformations and biosensors. The interesting properties displayed by nanoparticles demand new strategies for the manipulation of these materials on the nanoscale. Controlled modification of their surface with biomolecules is required to fully realize their potential in bionanotechnology. In this work, immobilization of a fullerene derivative with a mutant subtilisin is demonstrated, and the effect of the fullerene on the protein activity is determined. The fullerene-conjugated enzyme had improved catalytic properties in comparison to subtilisin immobilized on nonporous silica. Further, the pH profile of free and fullerene-conjugated subtilisin were almost identical.

Electrodes based on oxidized polypyrrole films have potentiometric selectivity toward anions. When the films are overoxidized, however, electron-rich groups are introduced on to the polymer chains, reversing the selectivity of the electrodes from anionic to cationic. In this study, electrochemically overoxidized polypyrrole film electrodes were prepared, and the conditions for film formation that lead to near-Nernstian potentiometric response were investigated. It was found that the doping ion, overoxidation solution, and pH affect the response of these electrodes. Redox interference is significantly lower for the overoxidized polypyrrole films than for polypyrrole electrodes.

A novel porous active carbon is utilized in order to adsorb the diethylaminoethyl-dextran (DEAE-dextran)-enzyme stabilized complexes, for the construction of highly stable biosensors. The interaction of DEAE-dextran with the examined enzymes increases dramatically the operational stabilization of the sensors, without adverse effects on the enzyme activity. At the same time, the porous active carbon allows for high enzyme loading, good electrical contact and low resistance throughout the sensing element. Glucose oxidase and horseradish peroxidase are used as model enzymes in this study to construct biosensors, with very good reproducibility (less than 5% RSD). As a result, the glucose sensor exhibits very long operational stability (over a period of 5 months), while the hydrogen peroxide sensor retains its initial activity after several weeks.