Search

Geothermal energy is a resource that has the potential for development in many countries around the world. Despite its versatility and economic viability, this resource faces numerous obstacles that hinder its deployment and capacity for achieving a similar market share as other renewable and clean energy sources. Both technical and non-technical barriers can be highly detrimental to the implementation of geothermal projects. A social license to operate (SLO) is a tool that can help the deployment of geothermal energy. As a new concept, SLO is little developed in the business literature but is still being adopted in many industries. Its main challenges reside in its context-dependence and the lack of clear frameworks to utilize it. This paper introduces, in a first known attempt, through a qualitative approach, a conceptual model of the social license to operate in the geothermal energy sector. For its development, three case studies, working group discussion and surveying were conducted in the framework of the H2020 funded CROWDTHERMAL project, which aims to empower EU citizens for direct participation in geothermal projects through crowdfunding. Findings of this paper also drew on existing general conceptual models of the SLO, and experiences from other sectors that have developed their own SLO models. The paper contributes to a more contextualized understanding of the social license within the geothermal sector and sheds the light on practices and challenges that influence the acquisition and maintenance of SLO in geothermal energy projects and initiatives.

In a context of pesticide use reduction, alternatives to chemical-based crop protection strategies are needed to control diseases. Crop and plant architectures can be viewed as levers to control disease outbreaks by affecting microclimate within the canopy or pathogen transmission between plants. Modeling and simulation is a key approach to help analyze the behaviour of such systems where direct observations are difficult and tedious. Modeling permits the joining of concepts from ecophysiology and epidemiology to define structures and functions generic enough to describe a wide range of epidemiological dynamics. Additionally, this conception should minimize computing time by both limiting the complexity and setting an efficient software implementation. In this paper, our aim was to present a model that suited these constraints so it could first be used as a research and teaching tool to promote discussions about epidemic management in cropping systems. The system was modelled as a combination of individual hosts (population of plants or organs) and infectious agents (pathogens) whose contacts are restricted through a network of connections. The system dynamics were described at an individual scale. Additional attention was given to the identification of generic properties of host-pathogen systems to widen the model's applicability domain. Two specific pathosystems with contrasted crop architectures were considered: ascochyta blight on pea (homogeneously layered canopy) and potato late blight (lattice of individualized plants). The model behavior was assessed by simulation and sensitivity analysis and these results were discussed against the model ability to discriminate between the defined types of epidemics. Crop traits related to disease avoidance resulting in a low exposure, a slow dispersal or a de-synchronization of plant and pathogen cycles were shown to strongly impact the disease severity at the crop scale.

Human age estimation from trace samples may give important leads early in a police investigation by contributing to the description of the perpetrator. Several molecular biomarkers are available for the estimation of chronological age, and currently, DNA methylation patterns are the most promising. In this study, a QIAGEN age protocol for age estimation was tested by five forensic genetic laboratories. The assay comprised bisulfite treatment of the extracted DNA, amplification of five CpG loci (in the genes of ELOVL2 , C1orf132 , TRIM59 , KLF14 , and FHL2 ), and sequencing of the amplicons using the PyroMark Q48 platform. Blood samples from 49 individuals with ages ranging from 18 to 64 years as well as negative and methylation controls were analyzed. An existing age estimation model was applied to display a mean absolute deviation of 3.62 years within the reference data set., Key Points: Age determination as an intelligence tool during investigations can be a powerful tool in forensic genetics.In this study, five laboratories ran 49 samples and obtained a mean absolute deviation of 3.62 years.Five markers were analyzed on a PyroMark Q48 platform., (© The Author(s) 2024. Published by OUP on behalf of the Academy of Forensic Science.)

The determination of tissue type is important when reconstructing a crime scene as skin cells may indicate innocent contact, whereas other types of cells, such as blood and semen, may indicate foul play. Up to now, there has been no specific DNA methylation-based marker to distinguish skin cell DNA from other body fluids. The goal of this study is to develop a DNA methylation-based assay to detect and identify skin cells collected at forensic crime scenes for use in DNA typing. For this reason, we have utilized a DNA methylation chip array-based genome-wide association study to identify skin-specific DNA methylation markers. DNA obtained from skin along with other body fluids, such as semen, saliva, blood, and vaginal epithelia, were tested using five genes that were identified as sites for potential new epigenetic skin markers. Samples were collected, bisulfite converted, and subjected to real-time polymerase chain reaction (PCR) with high-resolution melt analysis. In our studies, when using WDR11, PON2, and NHSL1 assays with bisulfite-modified PCR, skin/sweat amplicons melted at lower temperatures compared to blood, saliva, semen, and vaginal epithelia. One-way analysis of variance demonstrates that these three skin/sweat markers are significantly different when compared with other body fluids (p < 0.05). These results demonstrate that high-resolution melt analysis is a promising technology to detect and identify skin/sweat DNA from other body fluids., (© 2022 Wiley-VCH GmbH.)

For over 10 years, various studies have attempted to increase the recovery of DNA from ammunition by modifying the DNA collection, extraction, purification, and amplification procedures, with varying levels of success. This study focused on the "soaking" method of Montpetit & O'Donnell [1] and the "rinse-and-swab" method of Bille et al. [2]. First, testing for the presence of exogenous DNA, 210 boxed cartridges (brass, steel, and nickel-plated) from nine manufacturers were swabbed and DNA was extracted, concentrated, and quantified. Extracts that quantified > 0 ng/µL (44 of 210) were amplified and genotyped with GlobalFiler™. Of those, only one extract yielded two alleles indicating that the manufacturing and packaging of ammunition was virtually DNA free. Next, to obtain a baseline comparison of two DNA collection methods on a non-metallic substrate and identify a suitable number of cells to spot on cartridges, different DNA input amounts of primary human adult epidermal keratinocytes (HEKa) were tested. Thereafter, 300 brass and 300 nickel-plated, cartridges were spotted with HEKa cells containing ~5 ng of DNA, fired or unfired, and processed with either method. Finally, five methods representing hybrids of the soaking and rinse-and-swab methods were tested to determine if variations of those methods could be used to increase DNA yield and recovery. The results show that the soaking method consistently yielded more DNA than the rinse-and-swab method from a non-metallic substrate. However, the comparison study demonstrated that both methods performed comparably for cartridges. On average, the soaking method recovered 0.25 ng of DNA (5.1% recovery) and the rinse-and-swab method recovered 0.28 ng (5.8% recovery). However, average recoveries were significantly different among three analysts and considerable variation in yields were observed, possibly due to storage time. Furthermore, consistent with prior reports, the DNA recovered from brass casings was only 16% of that recovered from nickel-plated casings and the average yield of DNA from fired casings was reduced to 67% of unfired casings. Moreover, DNA extracts from brass or nickel-plated casings did not appear to contain amplification inhibitors and only 30/596 appeared severely degraded. Finally, both the published rinse-and-swab and soaking methods yielded more DNA than all modifications of the two methods. Overall, both methods yielded equivalent DNA quantities. Additionally, recovery of DNA from any given cartridge casing may be dependent on storage time as well as the skill, proficiency, and experience of the analyst and may reflect stochastic effects, particularly for casings containing low copy and/or degraded DNA., (Published by Elsevier B.V.)

DNA methylation has become one of the most useful biomarkers for age prediction and body fluid identification in the forensic field. Therefore, several assays have been developed to detect age-associated and body fluid-specific DNA methylation changes. Among the many methods developed, SNaPshot-based assays should be particularly useful in forensic laboratories, as they permit multiplex analysis and use the same capillary electrophoresis instrumentation as STR analysis. However, technical validation of any developed assays is crucial for their proper integration into routine forensic workflow. In the present collaborative exercise, two SNaPshot multiplex assays for age prediction and a SNaPshot multiplex for body fluid identification were tested in twelve laboratories. The experimental set-up of the exercise was designed to reflect the entire workflow of SNaPshot-based methylation analysis and involved four increasingly complex tasks designed to detect potential factors influencing methylation measurements. The results of body fluid identification from each laboratory provided sufficient information to determine appropriate age prediction methods in subsequent analysis. In age prediction, systematic measurement differences resulting from the type of genetic analyzer used were identified as the biggest cause of DNA methylation variation between laboratories. Also, the use of a buffer that ensures a high ratio of specific to non-specific primer binding resulted in changes in DNA methylation measurement, especially when using degenerate primers in the PCR reaction. In addition, high input volumes of bisulfite-converted DNA often caused PCR failure, presumably due to carry-over of PCR inhibitors from the bisulfite conversion reaction. The proficiency of the analysts and experimental conditions for efficient SNaPshot reactions were also important for consistent DNA methylation measurement. Several bisulfite conversion kits were used for this study, but differences resulting from the use of any specific kit were not clearly discerned. Even when different experimental settings were used in each laboratory, a positive outcome of the study was a mean absolute age prediction error amongst participant's data of only 2.7 years for semen, 5.0 years for blood and 3.8 years for saliva., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Tissue-specific differentially methylated regions (tDMRs) are regions of the genome with methylation patterns that modulate gene expression in those tissue types. The detection of tDMRs in forensic evidence can permit the identification of body fluids at trace levels. In this report, we have performed a bioinformatic analysis of an existing array dataset to determine if new tDMRs could be identified for use in body fluid identification from forensic evidence. Once these sites were identified, primers were designed and bisulfite modification was performed. The relative methylation level for each body fluid at a given locus was then determined using qPCR with high-resolution melt analysis (HRM). After screening 127 tDMR's in multiple body fluids, we were able to identify four new markers able to discriminate blood (2 markers), vaginal epithelia (1 marker) and buccal cells (1 marker). One marker for each target body fluid was also tested with pyrosequencing showing results consistent with those obtained by HRM. This work successfully demonstrates the ability of in silico analysis to develop a novel set of tDMRs capable of being differentiated by real time PCR/HRM. The method can rapidly determine the body fluids left at crime scenes, assisting the triers of fact in forensic casework., (© 2021 Wiley-VCH GmbH.)

Age-at-death estimation constitutes one of the key parameters for identification of human remains in forensic investigations. However, for applications in forensic anthropology, many current methods are not sufficiently accurate for adult individuals, leading to chronological age estimates erring by ±10 years. Based on recent trends in aging studies, DNA methylation has great potential as a solution to this problem. However, there are only a few studies that have been published utilizing DNA methylation to determine age from human remains. The aim of the present study was to expand the range of this work by analyzing DNA methylation in dental pulp from adult individuals. Healthy erupted third molars were extracted from individuals aged 22-70. DNA from pulp was isolated and bisulfite converted. Pyrosequencing was the chosen technique to assess DNA methylation. As noted in previous studies, we found that ELOVL2 and FHL2 CpGs played a role in age estimation. In addition, three new markers were evaluated-NPTX2, KLF14, and SCGN. A set of CpGs from these five loci was used in four different multivariate regression models, providing a Mean Absolute Error (MAE) between predicted and chronological age of 1.5-2.13 years. The findings from this research can improve age estimation, increasing the accuracy of identification in forensic anthropology.

This study investigates the adsorption of a block copolymer composed of a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) cationic polyelectrolyte and a poly(di(ethylene glycol) methyl ethermethacrylate) (PDEGMA) on oxidized cellulose nanocrystals (TO-CNCs) to produce hydrogels. PDMEAMA- b-PDEGMA was synthesized by atom-transfer radical polymerization. The extent and dynamics of the adsorption of PDMAEMA- b-PDEGMA on TO-CNCs were determined by electromechanical microbalance and optical techniques. Electrostatic adsorption was identified on TO-CNCs with the quaternized block copolymer. Small-angle neutron scattering experiments were performed to investigate the polymer behavior on the TO-CNC surfaces. Depending on the temperature, block copolymer induces the aggregation of nanocrystals after adsorption by connecting CNCs bundles with block copolymer chains. A reversible liquid-to-gel transition, triggered by temperature, was clearly detected by rheological measurements for the copolymer-CNC mixtures. At the optimal copolymer to CNC ratio the viscosity increased by 4 orders of magnitude at low shear rates. These stimuli-responsive CNC-based materials could be used as injectable biomedical systems.