Search

Solution-processed high-performing ambipolar organic phototransistors (OPTs) can enable low-cost integrated circuits. Here, a heteroatom engineering approach to modify the electron affinity of a low band gap diketopyrrolopyrole (DPP) co-polymer, resulting in well-balanced charge transport, a more preferential edge-on orientation and higher crystallinity, is demonstrated. Changing the comonomer heteroatom from sulfur (benzothiadiazole (BT)) to oxygen (benzooxadiazole (BO)) leads to an increased electron affinity and introduces higher ambipolarity. Organic thin film transistors fabricated from the novel PDPP-BO exhibit charge carrier mobility of 0.6 and 0.3 cm2 Vs⁻1 for electrons and holes, respectively. Due to the high sensitivity of the PDPP-based material and the balanced transport in PDPP-BO, its application as an NIR detector in an OPT architecture is presented. By maintaining a high on/off ratio (9 × 104), ambipolar OPTs are shown with photoresponsivity of 69 and 99 A W⁻1 and specific detectivity of 8 × 107 for the p-type operation and 4 × 109 Jones for the n-type regime. The high symmetric NIR-ambipolar OPTs are also evaluated as ambipolar photo-inverters, and show a 46% gain enhancement under illumination. © 2024 The Authors. Advanced Materials published by Wiley-VCH GmbH.

Neuromorphic computing requires electronic systems that can perform massively parallel computational tasks with low energy consumption. Such systems have traditionally been based on complementary metal-oxide-semiconductor circuits, but further advances in computational performance will probably require devices that can offer high-order complexity combined with area and energy efficiency. Halide perovskites can handle both ions and electronic charges, and could be used to create adaptive computing systems based on intrinsic device dynamics. The materials also offer exotic switching phenomena, providing opportunities for multimodal systems. Here we explore the development of neuromorphic hardware systems based on halide perovskites. We examine how devices based on these materials can serve as synapses and neurons, and can be used in neuromorphic computing networks. We also consider the challenges involved in developing practical perovskite neuromorphic systems, and highlight how these systems could augment and complement digital circuits.|This Review examines the development of neuromorphic hardware systems based on halide perovskites, considering how devices based on these materials can serve as synapses and neurons, and can be used in neuromorphic computing networks.

In organic solar cells with very small energetic-offset (& UDelta;ELE - CT), the charge-transfer (CT) and local-exciton (LE) states strongly interact via electronic hybridization and thermal population effects, suppressing the non-radiative recombination. Here, we investigated the impact of these effects on charge generation and recombination. In the blends of PTO2:C8IC and PTO2:Y6 with very small, ultra-fast CT state formation was observed, and assigned to direct photoexcitation resulting from strong hybridization of the LE and CT states (i.e., LE-CT intermixed states). These states in turn accelerate the recombination of both CT and charge separated (CS) states. Moreover, they can be significantly weakened by an external-electric field, which enhanced the yield of CT and CS states but attenuated the emission of the device. This study highlights that excessive LE-CT hybridization due to very low , whilst enabling direct and ultrafast charge transfer and increasing the proportion of radiative versus non-radiative recombination rates, comes at the expense of accelerating recombination losses competing with exciton-to-charge conversion process, resulting in a loss of photocurrent generation., Funding Agencies|Swedish Research Council VR [2019-00677]; National Natural Science Foundation of China (NSFC) [51973146]; Shandong Provincial Natural Science Foundation [ZR2022JQ09]; Collaborative Innovation Center of Suzhou Nano Science amp; Technology; EPSRC project ATIP [EP/TO28513/1]; Office of Naval Research [N00014-20-1-2110]

[Abstract] Emergent bioelectronic technologies are underpinned by the organic electrochemical transistor (OECT), which employs an electrolyte medium to modulate the conductivity of its organic semiconductor channel. Here we utilize postpolymerization modification (PPM) on a conjugated polymer backbone to directly introduce glycolated or anionic side chains via fluoride displacement. The resulting polymers demonstrated increased volumetric capacitances, with subdued swelling, compared to their parent polymer in p-type enhancement mode OECTs. This increase in capacitance was attributed to their modified side chain configurations enabling cationic charge compensation for thin film electrochemical oxidation, as deduced from electrochemical quartz crystal microbalance measurements. An overall improvement in OECT performance was recorded for the hybrid glycol/ionic polymer compared to the parent, owing to its low swelling and bimodal crystalline orientation as imaged by grazing-incidence wide-angle X-ray scattering, enabling its high charge mobility at 1.02 cm2·V–1·s–1. Compromised device performance was recorded for the fully glycolated derivative compared to the parent, which was linked to its limited face-on stacking, which hindered OECT charge mobility at 0.26 cm2·V–1·s–1, despite its high capacitance. These results highlight the effectiveness of anionic side chain attachment by PPM as a means of increasing the volumetric capacitance of p-type conjugated polymers for OECTs, while retaining solid-state macromolecular properties that facilitate hole transport.

[Abstract]: We report the first examples of carborane-containing non-fullerene acceptors (NFAs), and their use in organic photovoltaic (OPV) devices. NFAs employing an A–D–A′–D–A type design centred around a central electron withdrawing carborane unit (A′), using either para, meta, or ortho-carborane isomers are reported. We demonstrate that the nature of the isomer has a major impact on device performance, despite minor differences in optoelectronic and morphological properties, with the use of ortho-carborane resulting in the highest device efficiencies. We further show that end-group fluorination is an efficient strategy to modulate energy levels and improve device performance of such NFAs.