Search

Polydactyly is one of the most common congenital hand deformities managed by orthopaedic surgeons. It is most often found in isolation; however, rarely, it may be associated with genetic syndromes. Polydactyly is classified as postaxial, preaxial, or central depending on the radioulnar location of the duplicated digits. Postaxial polydactyly, which affects the ulnar side of the hand, is most common and is typically managed with excision or suture ligation of the supernumerary digit. Preaxial polydactyly, which affects the thumb or radial side of the hand, often requires reconstructive techniques to ensure a functional, stable thumb. Central polydactyly is much less common, and reconstruction can be challenging.

Background This study evaluated patients with and without a prosthetic dislocation after reverse total shoulder arthroplasty (RTSA) to identify risk factors for instability. Methods Dislocation and nondislocation cohorts were established for analysis in 119 patients who had undergone RTSA at our institution between 2011 and 2014. Preoperative history and parameters pertaining to RTSA design were evaluated for correlation with instability. A logistic regression model was used to analyze independent predictors. Results Eleven patients (9.2%) demonstrated instability in the early postoperative period. Dislocations occurred at an average of 8 weeks postoperatively (range, 3 days-5 months). The mean follow-up of all patients was 28 months (range, 6-106 months). Postoperative instability was associated with male gender, history of prior open shoulder surgery, and preoperative diagnoses of fracture sequelae, particularly proximal humeral or tuberosity nonunion. Absence of subscapularis repair was an independent predictor of instability. In addition, 5 of the 11 patients (45%) in the instability cohort sustained a second dislocation requiring another operation. Conclusions Redislocation after revision surgery for the initial dislocation was an unexpected and alarming finding. Treatment for the initial dislocation event by placement of a thicker polyethylene insert was inadequate in 45% of patients of our cohort and required another revision with a larger glenosphere and thicker humeral inserts. Initial instability after RTSA must be carefully managed, especially in the revision and post-traumatic setting. Exchange to a thicker polyethylene insert only carries a higher risk of recurrent instability.

This article reviews treatment and presents complications seen in the treatment of 7 common congenital hand differences, including syndactyly, camptodactyly, ulnar and radial polydactyly, thumb hypoplasia, radial longitudinal deficiency, and epidermolysis bullosa. The management of these conditions is challenging but has evolved over the last several decades with refined understanding of the disease processes and treatments. The goal of this article is to synthesize prior knowledge and provide further insights into these conditions that will help the surgeon avoid treatment complications.

Background: Recombinant human bone morphogenetic protein-2 (rhBMP-2) is a growth factor known to have in vitro effects on the growth and invasiveness of cancer. It has been approved by the U.S. Food and Drug Administration in limited doses for single-level anterior spinal arthrodesis, but it is commonly used off-label and at high doses. The effect of rhBMP-2 on the risk of cancer has been a concern. We sought to evaluate the risk of new cancers in patients receiving high-dose rhBMP-2. Methods: We used publicly available data from a pivotal, multicenter, randomized controlled trial of patients with degenerative lumbar spine conditions who underwent a single-level instrumented posterolateral arthrodesis with either high-dose rhBMP-2 in a compression-resistant matrix (CRM) (rhBMP-2/CRM; n = 239) or autogenous bone graft (control group; n = 224). We compared the risks of new cancers in the rhBMP-2/CRM and control groups at two and five years after surgery. Results: At two years, with 86% follow-up, there were fifteen new cancer events in eleven patients in the rhBMP-2/CRM group compared with two new cancer events in two patients in the control group treated with autogenous bone graft. The incidence rate of new cancer events per 100 person-years was 3.37 (95% confidence interval [CI], 1.89 to 5.56) in the rhBMP-2/CRM group at two years compared with 0.50 (95% CI, 0.06 to 1.80) in the control group. The incidence rate ratio was 6.75 (95% CI, 1.57 to 60.83; p = 0.0026) at two years. Calculated in terms of the number of patients with one or more cancer events two years after the surgery, the incidence rate per 100 person-years was 2.54 (95% CI, 1.27 to 4.54) in the rhBMP-2/CRM group compared with 0.50 (95% CI, 0.06 to 1.82) in the control group at two years; the incidence rate ratio was 5.04 (95% CI, 1.10 to 46.82; p = 0.0194). At five years, there was a 37% loss of follow-up, but a significantly greater incidence of cancer events was still observed in the rhBMP-2/CRM group. Conclusions: A high dose of 40 mg of rhBMP-2/CRM in lumbar spinal arthrodesis was associated with an increased risk of new cancer. Level of Evidence: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Purpose The importance of flexor tendon repair with both core and epitendinous suture placement has been well established. The objective of this study was to determine whether suture placement order affects gliding resistance and bunching in flexor digitorum profundus tendons in a human ex vivo model. Methods The flexor digitorum profundus tendons of the index, middle, ring, and little fingers of paired cadaver forearms were tested intact for excursion and mean gliding resistance in flexion and extension across the A2 pulley. Tendons were subsequently transected and repaired with either an epitendinous-first (n = 12) or a control (n = 12) repair. Gliding resistance of pair-matched tendons were analyzed at cycle 1 and during the steady state of tendon motion. The tendon repair breaking strength was also measured. Results The mean steady state gliding resistance was less for the epitendinous-first repair than for the control repair in flexion (0.61 N vs 0.72 N) and significantly less in extension (0.68 N vs 0.85 N). Similar results were seen for cycle 1. None of the repairs demonstrated gap formation; however, control repairs exhibited increased bunching. Load to failure was similar for both groups. Conclusions The order of suture placement for flexor tendon repair is important. Epitendinous-first repair significantly decreased mean gliding resistance, allowed for easier placement of core sutures, and resulted in decreased bunching. Clinical relevance Epitendinous-first flexor tendon repairs may contribute to improved clinical outcomes compared with control repairs by decreasing gliding resistance and bunching.

Background context Retrograde ejaculation (RE) is a complication of anterior lumbar interbody fusion (ALIF) techniques. Most commonly, this results from mechanical or inflammatory injury to the superior hypogastric plexus near the aortic bifurcation. Bone morphogenetic protein-2 (BMP-2) has been used in spinal fusions and has been associated with inflammatory and neuroinflammatory adverse reactions, which may contribute to RE development after anterior lumbar surgery. Purpose While controlling for anterior approach technique, we compared the incidence of RE with and without rhBMP-2 exposure, in large, matched cohorts of patients after ALIF. Study design Retrospective analysis of 10 years of prospectively gathered outcomes data on consecutive-patient cohorts having the same anterior exposure technique for ALIF with and without rhBMP-2 use. Patient sample All male patients without baseline sexual incapacity and having ALIF for lumbar spondylosis or spondylolisthesis of the lowest one or two lumbar levels with and without rhBMP-2, from 2002 through 2011. Outcome measures Diagnosis of RE as a new finding after ALIF compared against BMP-2 exposure, comorbid conditions, and other urological complications after ALIF surgery. Methods From the comprehensive surgical database at a high volume, university practice, male subjects having ALIF at one (L5/S1) or two levels (L4/5, L5/S1) from 2002 to 2011 were identified. Baseline comorbid factors, postoperative urinary catheter/retention events, and RE events were recorded and comparative incidence compared. Results There were four consecutive-patient cohorts identified: one before rhBMP-2 use was adopted (n=174), two cohorts in which BMP-2 use was routine (n=88 and n=151), and one final cohort after BMP-2 use was discontinued from routine use (n=59). The cohorts with and without BMP-2 exposure were closely comparable for age, approach, levels of surgery, comorbid factors affecting RE. Of 239 patients with ALIF and exposure to BMP-2, RE was diagnosed in 15 subjects (6.3%), compared with an RE diagnosis rate of two of 233 control patients without BMP-2 exposure (0.9%; p=.0012). Urinary retention after bladder catheter removal was also more frequently observed in patients exposed to BMP-2 (9.7%) compared with control patients (4.6%; p=.043). Of the baseline comorbid factors, medical or surgical treatment for prostatic hypertrophy disease was associated with an increased risk of RE in the BMP-2 patients (p=.034). Conclusions This study confirms previous reports of a higher rate of RE in ALIF procedures using rhBMP-2 and an open anterior approach to the spine. This effect may be associated with an increased risk of postoperative urinary retention after BMP-2 exposure. The magnitude of the RE effect may be increased with concomitant prostatic disease treatments.

Emergency medicine (EM) physicians are frequently responsible for evaluating and treating patients with urgent or emergent musculoskeletal conditions, so it is critical that they achieve a basic level of proficiency in musculoskeletal medicine. However, inadequacies in musculoskeletal education have previously been documented among medical students, residents, and attending physicians in a number of specialties. The goal of this study was to assess the proficiency with musculoskeletal medicine among EM physicians in particular.A validated musculoskeletal medicine competency examination was administered to the EM residents and faculty at a university-affiliated level 1 trauma center. Demographic data and satisfaction with musculoskeletal education were also surveyed.Twenty-three EM residents and 21 attending physicians completed the survey. Thirty-five percent of residents and 43% of attending physicians failed to demonstrate proficiency on the examination. Pass rates were not significantly different among junior residents, senior residents, or attending physicians. Twenty-three percent of respondents indicated that they were dissatisfied with their musculoskeletal education.Significant deficiencies in musculoskeletal education exist among EM physicians in training and attending staff. Given the frequency with which these physicians evaluate and treat acute musculoskeletal conditions, additional resources should be committed to their training.

Purpose Surgeons confronted with a long spiral metacarpal fracture may choose to fix it solely with lagged screws. A biomechanical analysis of a metacarpal spiral fracture model was performed to determine whether 3 1.5-mm screws or 2 2.0-mm screws provided more stability during bending and torsional loading. Methods Second and third metacarpals were harvested from 12 matched pairs of fresh-frozen cadaveric hands and spiral fractures were created. One specimen from each matched pair was fixed with 2 2.0-mm lagged screws whereas the other was fixed with 3 1.5-mm lagged screws. Nine pairs underwent combined cyclic cantilever bending and axial compressive loading followed by loading to failure. Nine additional pairs were subjected to cyclic external rotation while under a constant axial compressive load and were subsequently externally rotated to failure under a constant axial compressive load. Paired t tests were used to compare cyclic creep, stiffness, displacement, rotation, and peak load levels. Results Average failure torque for all specimens was 7.2 ± 1.7 Nm. In cyclic torsional testing, the group with 2 screws exhibited significantly less rotational creep than the one with 3 screws. A single specimen in the group with 2 screws failed before cyclic bending tests were completed. No other significant differences were found between test groups during torsional or bending tests. Conclusions Both constructs were biomechanically similar except that the construct with 2 screws displayed significantly less loosening during torsional cyclic loading, although the difference was small and may not be clinically meaningful. Clinical relevance Because we found no obvious biomechanical advantage to using 3 1.5-mm lagged screws to fix long spiral metacarpal fractures, the time efficiency and decreased implant costs of using 2-2.0 mm lagged screws may be preferred.

The patient was a 19-year-old right-hand-dominant collegiate football lineman who sustained a left scaphoid proximal pole fracture during a game. He was treated with closed reduction and percutaneous fixation with placement of a cannulated headless compression screw (Mini-Acutrak 2, Acumed, Hillsboro, OR). Postoperative radiographs demonstrated maintained reduction and appropriate fixation of the compression screw. Five months after surgery, the patient noted resolution of pain, excellent range of motion, and apparent radiographic union. He was allowed to return to sport, but subsequently reported pain with wrist motion and lifting that limited his functional ability.

>> Despite efforts to curtail tobacco use, smoking continues to be the leading preventable cause of death both in the United States and internationally.>> Tobacco use is associated with a number of systemic complications as well as orthopaedic-related complications.>> New quality measures by the Cen

Background context In lumbar surgery, local bone graft is often harvested and used in posterolateral fusion procedures. The volume of local bone graft available for posterolateral fusion has not been determined in North American patients. Some authors have described this as minimal, but others have suggested the volume was sufficient to be reliably used as a stand-alone bone graft substitute for single-level fusion. Purpose To describe the technique used and determine the volume of local bone graft available in a cohort of patients undergoing single-level primary posterolateral fusion by the authors harvesting technique. Study design Technical description and cohort report. Patient sample Consecutive patients undergoing lumbar posterolateral fusion with or without instrumentation for degenerative processes. Outcome measure Local bone graft volume. Methods Consecutive patients undergoing lumbar posterolateral fusion with or without instrumentation for degenerative processes of were studied. Local bone graft was harvested by a standard method in each patient and the volume measured by a standard procedure. Results Twenty-five patients were studied, and of these 11 (44%) had a previous decompression. The mean volume of local bone graft harvested was measured to be 25 cc (range, 12–36 cc). Local bone graft was augmented by iliac crest bone in six of 25 patients (24%) if the posterolateral fusion bed was not well packed with local bone alone. There was a trend to greater local bone graft volumes in men and in patients without previous decompression. Conclusion Large volumes of local bone can be harvested during posterolateral lumbar fusion surgery. Even in patients with previous decompression the volume harvested is similar to that reported harvested from the posterior iliac crest for single-level fusion.