Search

© 2016 David Maestre, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0). This work was supported by UCM-Banco Santander, program GR3/14 and MINECO (Project Nos. MAT 2012-31959, MAT 2015-65274-R and Consolider Ingenio CSD 2009-00013)., Microtubes and rods with nanopipes of transparent conductive oxides (TCO), such as SnO_2, TiO_2, ZnO and In_2O_3, have been fabricated following a vapor-solid method which avoids the use of catalyst or templates. The morphology of the as-grown tubular structures varies as a function of the precursor powder and the parameters employed during the thermal treatments carried out under a controlled argon flow. These materials have been also doped with different elements of technological interest (Cr, Er, Li, Zn, Sn). Energy Dispersive X-ray Spectroscopy (EDS) measurements show that the concentration of the dopants achieved by the vapor-solid method ranges from 0.5 to _3 at.%. Luminescence of the tubes has been analyzed, with special attention paid to the influence of the dopants on their optical properties. In this work, we summarize and discuss some of the processes involved not only in the anisotropic growth of these hollow micro and nanostructures, but also in their doping., Ministerio de Economía y Competitividad (MINECO), Universidad Complutense de Madrid (UCM), Banco Santander Central Hispano (BSCH), Actividad Investigadora CONSOLIDER - INGENIO (MINECO), Depto. de Física de Materiales, Fac. de Ciencias Físicas, TRUE, pub

Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce Cu2-xS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our Cu2-xS electrodes reach a state-of-the-art performance of ∼400 mA cm-2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our Cu2-xS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient Cu2-xS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions.

Metal oxides and oxyhydroxides exhibit state-of-the-art activity for the oxygen evolution reaction (OER); however, their reaction mechanism, particularly the relationship between charging of the oxide and OER kinetics, remains elusive. Here, we investigate a series of Mn-, Co-, Fe-, and Zn-doped nickel oxides using operando UV-vis spectroscopy coupled with time-resolved stepped potential spectroelectrochemistry. The Ni2+/Ni3+redox peak potential is found to shift anodically from Mn- < Co- < Fe- < Zn-doped samples, suggesting a decrease in oxygen binding energetics from Mn- to Zn-doped samples. At OER-relevant potentials, using optical absorption spectroscopy, we quantitatively detect the subsequent oxidation of these redox centers. The OER kinetics was found to have a second-order dependence on the density of these oxidized species, suggesting a chemical rate-determining step involving coupling of two oxo species. The intrinsic turnover frequency per oxidized species exhibits a volcano trend with the binding energy of oxygen on the Ni site, having a maximum activity of ∼0.05 s-1at 300 mV overpotential for the Fe-doped sample. Consequently, we propose that for Ni centers that bind oxygen too strongly (Mn- and Co-doped oxides), OER kinetics is limited by O-O coupling and oxygen desorption, while for Ni centers that bind oxygen too weakly (Zn-doped oxides), OER kinetics is limited by the formation of oxo groups. This study not only experimentally demonstrates the relation between electroadsorption free energy and intrinsic kinetics for OER on this class of materials but also highlights the critical role of oxidized species in facilitating OER kinetics.

Exposing BiVO photoanodes to light-aging treatments is known to produce a significant photocurrent enhancement. Until now, the interpretation given to this phenomenon is associated to the formation of oxygen vacancies and little is reported about chemical changes in the material. Herein, the chemical segregation of Bi species toward the surface upon light-aging treatment is demonstrated, which takes place with the concomitant formation of intra-bandgap states associated to the oxygen vacancies. It is further demonstrated that these intra-bandgap states are photoactive and generate photocurrent under infrared excitation. These results highlight the importance of understanding light-induced effects while employing multinary metal oxide photoelectrodes.

Sustainable electrocatalysis of the oxygen evolution reaction (OER) constitutes a major challenge for the realization of green fuels. Oxides based on Ni and Fe in alkaline media have been proposed to avoid using critical raw materials. However, their ill-defined structures under OER conditions make the identification of key descriptors difficult. Here, we have studied Fe−Ni−Zn spinel oxides, with a well-defined crystal structure, as a platform to obtain general understanding on the key contributions. The OER reaches maximum performance when: (i) Zn is present in the Spinel structure, (ii) very dense, equimolar 1 : 1 : 1 stoichiometry sites appear on the surface as they allow the formation of oxygen vacancies where Zn favors pushing the electronic density that is pulled by the octahedral Fe and tetrahedral Ni redox pair lowering the overpotential. Our work proves cooperative electronic effects on surface active sites as key to design optimum OER electrocatalysts.

Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin‐coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo‐oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar‐to‐current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted.