Search

Quantum metrology offers superior measurement precision compared to classical counterparts. Traditionally, achieving this enhancement involves employing multi-particle entangled quantum states, necessitating state preparation and detection schemes that are practically challenging. In this article, we present a versatile and on-demand protocol for deterministic parameter estimation that leverages two state-transfer operations on a single bosonic mode. Specifically, we demonstrate this protocol in the context of phase and amplitude estimation using the superposition of coherent states in the bosonic circuit quantum electrodynamics (cQED) platform. With low photon numbers of up to 1.76, we achieve quantum-enhanced precision approaching the Heisenberg scaling, reaching a metrological gain of 7.5(6) dB and 9.3(5) dB respectively for phase and amplitude estimation. We show that the gain or sensitivity range can be further enhanced on the fly by tailoring the input states based on specific system constraints. Our protocol can be adapted to further optimize the desired figures of merit using tailored quantum states or operations, not only for bosonic cQED hardware but also readily extensible to other continuous-variable platforms. The realisation of this versatile and effective scheme affords a promising path towards practical quantum-enhanced sensing., Comment: Main text (4 figures, 5 pages without references) and Supplementary text (6 figures, 5 pages)

Quantum state reconstruction is an essential element in quantum information processing. However, efficient and reliable reconstruction of non-trivial quantum states in the presence of hardware imperfections can be challenging. This task is particularly demanding for high-dimensional states encoded in continuous-variable (CV) systems, as many error-prone measurements are needed to cover the relevant degrees of freedom of the system in phase space. In this work, we introduce an efficient and robust technique for optimized reconstruction based on excitation number sampling (ORENS). We use a standard bosonic circuit quantum electrodynamics (cQED) setup to experimentally demonstrate the robustness of ORENS and show that it outperforms the existing cQED reconstruction techniques such as Wigner and Husimi Q tomography. Our investigation highlights that ORENS is naturally free of parasitic system dynamics and resilient to decoherence effects in the hardware. Finally, ORENS relies only on the ability to accurately measure the excitation number of the state, making it a versatile and accessible tool for a wide range of CV platforms and readily scalable to multimode systems. Thus, our work provides a crucial and valuable primitive for practical quantum information processing using bosonic modes., Comment: Main text (6 pages with 4 figures) and Appendices (10 pages with 7 figures and 4 tables)

The diverse applications of light-matter interactions in science and technology stem from the qualitatively distinct ways these interactions manifest, prompting the development of physical platforms that can interchange between regimes on demand. Bosonic cQED employs the light field of high-Q superconducting cavities coupled to non-linear circuit elements, harnessing the rich dynamics of their interaction for quantum information processing. However, implementing fast switching of the interaction regime without deteriorating the cavity coherence is a significant challenge. We present the first experiment to achieve this feat, combining nanosecond-scale frequency tunability of a transmon coupled to a cavity with lifetime of hundreds of microseconds. Our implementation affords a range of new capabilities for quantum information processing; from fast creation of cavity Fock states using resonant interaction and interchanging tomography techniques at qualitatively distinct interaction regimes on the fly, to the suppression of unwanted cavity-transmon dynamics during idle evolution. By bringing flux tunability into the bosonic cQED toolkit, our work opens up a new paradigm to probe the full range of light-matter interaction dynamics within a single platform and provides valuable new pathways towards robust and versatile quantum information processing.

With its rich dynamics, the quantum harmonic oscillator is an innate platform for understanding real-world quantum systems and could even excel as the heart of a quantum computer. A particularly promising and rapidly advancing platform that harnesses quantum harmonic oscillators for information processing is the bosonic circuit quantum electrodynamics (cQED) system. In this article, we provide perspectives on the progress, challenges, and future directions in building a bosonic cQED quantum computer. We describe the main hardware building blocks and how they facilitate quantum error correction, metrology, and simulation. We conclude with our views of the key challenges that lie on the horizon, as well as scientific and cultural strategies for overcoming them and building a practical quantum computer with bosonic cQED hardware.

Cat states, with their unique phase-space interference properties, are ideal candidates for understanding fundamental principles of quantum mechanics and performing key quantum information processing tasks. However, they are highly susceptible to photon loss, which inevitably diminishes their quantum non-Gaussian features. Here, we protect these non-Gaussian features against photon loss by compressing the phase-space distribution of a cat state. We achieve this compression with a deterministic technique based on the echo conditional displacement operation in a circuit QED device. We present a versatile technique for creating robust non-Gaussian continuous-variable resource states in a highly linear bosonic mode and manipulating their phase-space distribution to achieve enhanced resilience against photon loss. Compressed cat states offer an attractive avenue for obtaining new insights into quantum foundations and quantum metrology, and for developing inherently more protected bosonic codewords for quantum error correction., Comment: 12 pages, 9 figures

Quantum computing offers a powerful new paradigm of information processing that has the potential to transform a wide range of industries. In the pursuit of the tantalizing promises of a universal quantum computer, a multitude of new knowledge and expertise has been developed, enabling the construction of novel quantum algorithms as well as increasingly robust quantum hardware. In particular, we have witnessed rapid progress in the circuit quantum electrodynamics (cQED) technology, which has emerged as one of the most promising physical systems that is capable of addressing the key challenges in realizing full-stack quantum computing on a large scale. In this article, we present some of the most crucial building blocks developed by the cQED community in recent years and a pr\'{e}cis of the latest achievements towards robust universal quantum computation. More importantly, we aim to provide a synoptic outline of the core techniques that underlie most cQED experiments and offer a practical guide for a novice experimentalist to design, construct, and characterize their first quantum device

The unique features of quantum theory offer a powerful new paradigm for information processing. Translating these mathematical abstractions into useful algorithms and applications requires quantum systems with significant complexity and sufficiently low error rates. Such quantum systems must be made from robust hardware that can coherently store, process, and extract the encoded information, as well as possess effective quantum error correction (QEC) protocols to detect and correct errors. Circuit quantum electrodynamics (cQED) provides a promising hardware platform for implementing robust quantum devices. In particular, bosonic encodings in cQED that use multi-photon states of superconducting cavities to encode information have shown success in realizing hardware-efficient QEC. Here, we review recent developments in the theory and implementation of quantum error correction with bosonic codes and report the progress made towards realizing fault-tolerant quantum information processing with cQED devices., Comment: 26 pages, 5 figures

The efficient simulation of quantum systems is a primary motivating factor for developing controllable quantum machines. For addressing systems with underlying bosonic structure, it is advantageous to utilize a naturally bosonic platform. Optical photons passing through linear networks may be configured to perform quantum simulation tasks, but the efficient preparation and detection of multiphoton quantum states of light in linear optical systems are challenging. Here, we experimentally implement a boson sampling protocol for simulating molecular vibronic spectra [Nature Photonics $\textbf{9}$, 615 (2015)] in a two-mode superconducting device. In addition to enacting the requisite set of Gaussian operations across both modes, we fulfill the scalability requirement by demonstrating, for the first time in any platform, a high-fidelity single-shot photon number resolving detection scheme capable of resolving up to 15 photons per mode. Furthermore, we exercise the capability of synthesizing non-Gaussian input states to simulate spectra of molecular ensembles in vibrational excited states. We show the re-programmability of our implementation by extracting the spectra of photoelectron processes in H$_2$O, O$_3$, NO$_2$, and SO$_2$. The capabilities highlighted in this work establish the superconducting architecture as a promising platform for bosonic simulations, and by combining them with tools such as Kerr interactions and engineered dissipation, enable the simulation of a wider class of bosonic systems.

Photonic states of superconducting microwave cavities controlled by transmon ancillas provide a platform for encoding and manipulating quantum information. A key challenge in scaling up the platform is the requirement to communicate on demand the information between the cavities. It has been recently demonstrated that a tunable bilinear interaction between two cavities can be realized by coupling them to a bichromatically-driven transmon ancilla, which allows swapping and interfering the multi-photon states of the cavities [Gao et al., Phys. Rev. X 8, 021073(2018)]. Here, we explore both theoretically and experimentally the regime of relatively strong drives on the ancilla needed to achieve fast SWAP gates but which can also lead to undesired non-perturbative effects that lower the SWAP fidelity. We develop a theoretical formalism based on linear response theory that allows one to calculate the rate of ancilla-induced interaction, decay and frequency shift of the cavities in terms of a susceptibility matrix. We treat the drives non-perturbatively using Floquet theory, and find that the interference of the two drives can strongly alter the system dynamics even in the regime where the rotating wave approximation applies. We identify two major sources of infidelity due to ancilla decoherence. i) Ancilla dissipation and dephasing leads to incoherent hopping among Floquet states which occurs even when the ancilla is at zero temperature, resulting in a sudden change of the SWAP rate. ii) The cavities inherit finite decay from the relatively lossy ancilla through the inverse Purcell effect; the effect can be enhanced when the drive-induced AC Stark shift pushes certain ancilla transition frequencies to the vicinity of the cavity frequencies. The theoretical predictions agree quantitatively with the experimental results, paving the way for using the theory to design future experiments., Comment: 43 pages, 18 figures. Extended discussions on transmon-induced cavity dephasing in Sec. IVD

The realization of robust universal quantum computation with any platform ultimately requires both the coherent storage of quantum information and (at least) one entangling operation between individual elements. The use of continuous-variable bosonic modes as the quantum element is a promising route to preserve the coherence of quantum information against naturally-occurring errors. However, operations between bosonic modes can be challenging. In analogy to the exchange interaction between discrete-variable spin systems, the exponential-SWAP unitary [$\mathbf{U}_{\mathrm{E}}\left(\theta_c\right)$] can coherently transfer the states between two bosonic modes, regardless of the chosen encoding, realizing a deterministic entangling operation for certain $\theta_c$. Here, we develop an efficient circuit to implement $\mathbf{U}_{\mathrm{E}}\left(\theta_c\right)$ and realize the operation in a three-dimensional circuit QED architecture. We demonstrate high-quality deterministic entanglement between two cavity modes with several different encodings. Our results provide a crucial primitive necessary for universal quantum computation using bosonic modes., Comment: 13 pages, 10 figures, 4 tables

Interference experiments provide a simple yet powerful tool to unravel fundamental features of quantum physics. Here we engineer an RF-driven, time-dependent bilinear coupling that can be tuned to implement a robust 50:50 beamsplitter between stationary states stored in two superconducting cavities in a three-dimensional architecture. With this, we realize high contrast Hong-Ou- Mandel (HOM) interference between two spectrally-detuned stationary modes. We demonstrate that this coupling provides an efficient method for measuring the quantum state overlap between arbitrary states of the two cavities. Finally, we showcase concatenated beamsplitters and differential phase shifters to implement cascaded Mach-Zehnder interferometers, which can control the signature of the two-photon interference on-demand. Our results pave the way toward implementation of scalable boson sampling, the application of linear optical quantum computing (LOQC) protocols in the microwave domain, and quantum algorithms between long-lived bosonic memories., Comment: 6 pages, 5 figures

Entangling gates between qubits are a crucial component for performing algorithms in quantum computers. However, any quantum algorithm must ultimately operate on error-protected logical qubits encoded in high-dimensional systems. Typically, logical qubits are encoded in multiple two-level systems, but entangling gates operating on such qubits are highly complex and have not yet been demonstrated. Here, we realize a controlled NOT (CNOT) gate between two multiphoton qubits in two microwave cavities. In this approach, we encode a qubit in the high-dimensional space of a single cavity mode, rather than in multiple two-level systems. We couple two such encoded qubits together through a transmon, which is driven by an RF pump to apply the gate within 190 ns. This is two orders of magnitude shorter than the decoherence time of the transmon, enabling a high-fidelity gate operation. These results are an important step towards universal algorithms on error-corrected logical qubits., Comment: 10 pages, 11 figures (incl. Supplementary Information)

Quantum superpositions of distinct coherent states in a single-mode harmonic oscillator, known as "cat states", have been an elegant demonstration of Schrodinger's famous cat paradox. Here, we realize a two-mode cat state of electromagnetic fields in two microwave cavities bridged by a superconducting artificial atom, which can also be viewed as an entangled pair of single-cavity cat states. We present full quantum state tomography of this complex cat state over a Hilbert space exceeding 100 dimensions via quantum non-demolition measurements of the joint photon number parity. The ability to manipulate such multi-cavity quantum states paves the way for logical operations between redundantly encoded qubits for fault-tolerant quantum computation and communication.

We study the energy relaxation times ($T_1$) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean electromagnetic environment and suppressed non-equilibrium quasiparticle density, we find an approximately proportional relation between the transmon relaxation rates and surface participation ratios. These results suggest dielectric dissipation arising from material interfaces is the major limiting factor for the $T_1$ of transmons in 3D cQED architecture. Our analysis also supports the notion of spatial discreteness of surface dielectric dissipation., Comment: Main text: 5 pages 4 figures; Supplementary Materials: 6 pages 4 figures 1 table

Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reducing the lifetimes of detrimental single-electron-like excitations known as quasiparticles. Using a contactless injection technique with unprecedented dynamic range, we quantitatively distinguish between recombination and trapping mechanisms in controlling the dynamics of residual quasiparticles, and show quantized changes in quasiparticle trapping rate due to individual vortices. These results highlight the prominent role of quasiparticle trapping in future development of superconducting qubits, and provide a powerful characterization tool along the way., Comment: 8 pages with 4 figures for the main text, 13 pages with 11 figures for supplementary material

As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxation is dominated by quasiparticle loss. Resolution on the scale of a single quasiparticle is obtained by performing quantum non-demolition projective measurements within a time interval much shorter than $T_1$, using a quantum limited amplifier (Josephson Parametric Converter). The quantum jumps statistics switches between the expected Poisson distribution and a non-Poissonian one, indicating large relative fluctuations in the quasiparticle population, on time scales varying from seconds to hours. This dynamics can be modified controllably by injecting quasiparticles or by seeding quasiparticle-trapping vortices by cooling down in magnetic field.

We develop a framework for solving the action of a three-channel passive optical interferometer on single-photon pulse inputs to each channel using SU(3) group-theoretic methods, which can be readily generalized to higher-order photon-coincidence experiments. We show that features of the coincidence plots vs relative time delays of photons yield information about permanents, immanants, and determinants of the interferometer SU(3) matrix.