Search

The second generation (2G) high-temperature superconducting (HTS) REBCO tape and the HTS cable made by the REBCO company are considered to be alternative materials for future superconducting magnet design due to their exceptional performance. The twisted stacked-tape slotted-core (TSSC) cable-in-conduit-conductor cable, which is one of the crucial layout structures in HTS cables, has been extensively studied by numerous research groups over the years. In this paper, a 3D finite element model of the TSSC HTS cable under bending and axial tensile loads is established using the bilinear isotropic hardening model in COMSOL commercial finite element software. The mechanical behavior of the TSSC cable under bending and axial tensile loads, as well as the evolution process of overall cable performance and critical current of individual tapes inside slots, are revealed by conducting mechanical analysis and using an empirical fitting formula between the critical current density of the 2G HTS tapes and axial strain. Furthermore, optimization engineering suggestions for its structure are provided, such as reducing the twist pitch, decreasing the tape width, increasing the number of tapes, reducing the slot width while avoiding direct contact between tapes and slot walls, increasing the number of slots, increasing diameter of diversion trench and inner diameter of helical core under predominant bending loads. In the case of axial tensile loads, the aforementioned suggestions are also applicable except for the inner and outer diameters of the helical core. The critical current performance can be enhanced by augmenting the outer diameter of the helical core in this case. However, it is almost unaffected by the inner diameter of the helical core. [ABSTRACT FROM AUTHOR]

Topological insulators (TIs) are a new type of quantum state materials. Due to their novel physical properties, such as topological protection defect immunity to edge states, TIs have become the focus of attention in condensed matter and material physics. At present, the research on TIs has been gradually extended to classical wave fields such as electromagnetic waves, acoustic waves, and elastic waves, and has aroused extensive research interest. However, for elastic wave systems, most TIs cannot actively control topological interface states due to the limitation of fixed structure, which hinders their application in practical situations. Here, we propose a kind of tunable three-dimensional (3D) valley Hall insulator composed of magnetoelastic materials. First, the topological phase transition can be induced by the asymmetric geometry. Then, the working frequency of topological interface states can be changed by using static magnetic fields. Second, topological phase transformation can also be induced by independently tuning the distribution of static magnetic fields or pre-stress in each unit. Based on this, reconfigurable propagation routes of interface states with arbitrary shapes can be realized by tuning the distribution of static magnetic fields or pre-stress in each unit. Finally, considering the sandwich structure composed of different magnetic fields or pre-stress distribution modes, the waveguide with tunable width and route is designed by coupling edge and bulk states, which is convenient for application and better energy transfer. This study provides a reference for the design of a tunable intelligent elastic waveguide. [ABSTRACT FROM AUTHOR]

Given the importance of large-scale engineering applications of the superconducting compound Nb3Sn, both its use and performance under certain operating conditions have attracted the interest of applied superconductivity researchers and material scientists for several years now. Huge efforts are directed toward understanding the response to applied loads and predicting fracture damage within their internal microstructure; this is fundamental in the design of superconducting coils and magnets which must meet stringent requirements in terms of maximum thermal and electromagnetic loads. In this paper, the fracture behaviors in polycrystalline Nb3Sn and Nb3Sn filaments with composite structures are investigated using the micromechanical finite element (FE) models with Voronoi tessellation. First, the 2D and 3D Voronoi FE models of the polycrystalline Nb3Sn tensile tests are developed and validated to provide insight into the cracking behavior in the intergranular brittle fracture of polycrystalline Nb3Sn. A cohesive zone model is used to simulate crack propagation at the grain level model including grain boundary zones. It is found that the pre-existing cracks of polycrystals and martensitic phase transformation of grains significantly impact the fracture properties in polycrystalline Nb3Sn. Second, detailed FE models of powder-in-tube (PIT) and bronze route filaments with Voronoi structures for fracture analysis are then developed on the basis of experimental observations of sectional morphologies. The mechanism of crack initiation and propagation under tensile load have been investigated by analyzing the mechanical properties of each component and the characteristics of multi-scale composite structures of filaments. Furthermore, the damage situation is investigated in PIT filaments undergoing transverse compressive load. The proposed simulation method in this paper can be extended to the fracture and damage analysis of Nb3Sn superconducting wires with different layouts and fabrication processes. [ABSTRACT FROM AUTHOR]