Search

Although stochastic modeling methods can achieve multiple implementations of sedimentary microfacies model in dense well blocks, it is difficult to realize continuous convergence of well spacing. Taking the small high-sinuosity meandering river sediments of the third member of Quantou Formation in Songliao Basin as an example, a deterministic modeling method based on geological vector information was explored in this article. Quantitative geological characteristics of point bar sediments were analyzed by field outcrops, modern sediments, and dense well block anatomy. The lateral extension distance, length, and spacing parameters of the point bar were used to quantitatively characterize the thickness, dip angle, and frequency of the lateral layer. In addition, the three-dimensional architecture modeling of the point bar was carried out in the study. The established three-dimensional architecture model of well X24-1 had continuous convergence near all wells, which conformed to the geological knowledge of small high-sinuosity meandering river, and verified the reliability of this method in the process of geological modeling in dense well blocks.

Tight sandstone and shale oil and gas are the key targets of unconventional oil and gas exploration in the lake-delta sedimentary systems of China. Understanding the coevolutionary diagenesis of sandstone and shale reservoirs is crucial for the prediction of reservoir quality, ahead of drilling, in such systems. Thin-section description, scanning electron microscopy (SEM), X-ray diffraction (XRD), fluid inclusion analysis, porosity and permeability tests, high-pressure mercury intrusion (HPMI) measurements and nuclear magnetic resonance tests (NMR) were used to reveal the coevolutionary diagenetic mechanisms of a sandstone and shale reservoir in the Lianggaoshan Formation of the Eastern Sichuan Basin, China. The thermally mature, organic-matter-rich, dark shale of layer3 is the most important source rock within the Lianggaoshan Formation. It started to generate abundant organic acids at the early stage of mesodiagenesis and produced abundant hydrocarbons in the early Cretaceous. Porewater with high concentrations of Ca2+ and CO32− entered the sandstone reservoir from dark shale as the shale was compacted during burial. Potassium feldspar dissolution at the boundary of the sandstone was more pervasive than at the center of the sandstone. The K+ released by potassium feldspar dissolution migrated from the sandstone into mudstone. Grain-rimming chlorite coats occurred mainly in the center of the sandstone. Some silica exported from the shale was imported by the sandstone boundary and precipitated close to the shale/sandstone boundary. Some intergranular dissolution pores and intercrystal pores were formed in the shale due to dissolution during the early stages of mesodiagenesis. Chlorite coats, which precipitated during eodiagenesis, were beneficial to the protection of primary pore space in the sandstone. Calcite cement, which preferentially precipitated at the boundary of sandstone, was not conducive to reservoir development. Dissolution mainly occurred at the early stage of mesodiagenesis due to organic acids derived from the dark shale. Calcite cement could also protect some primary pores from compaction and release pore space following dissolution. The porosity of sandstone and shale was mainly controlled by the thickness of sandstone and dark shale. [ABSTRACT FROM AUTHOR]

China shale oil, which is preserved in lacustrine shale with strong heterogeneity and relatively low maturity, has been a research hotspot of unconventional resources. However, controlling factors of shale oil enrichment and resource potential evaluation restricted efficient exploration and development of lacustrine shale oil. On the basis of well logging data, TOC content, Rock-Eval pyrolysis values, thermal maturity, 100 oil saturation data, and pressure coefficient, the core observation, X-ray diffraction analysis, physical property analysis, scanning electron microscopy, CT scan, well logging interpretation, and volumetric genesis method depending on three-dimensional geological modeling were used to determine enrichment factors and evaluate the resource potential of Qingshankou Formation shale oil in the Southern Songliao Basin. Shale oil was mainly enriched in the semideep and deep lake shale of K2qn1, with the high capacity of hydrocarbon generation and favorable petrological and mineralogical characteristics, pore space characteristics, and physical properties in the low structural part of the Southern Songliao Basin. The three-dimensional geological resource model of Qingshankou Formation lacustrine shale oil was determined by the key parameters (Ro, TOC, and S 1 ) of shale oil in the favorable zone of the Southern Songliao Basin, northeast China. The geological resource of shale oil, which was calculated by two grid computing methods ( F 1 and F 2 ), was, respectively, 1.713 × 10 12 kg and 1.654 × 10 12 kg. The great shale oil resource indicates a promising future in the exploration and development of Qingshankou Formation shale oil of the Southern Songliao Basin. [ABSTRACT FROM AUTHOR]

A novel sample pretreatment method, gas purge micro-syringe extraction (GP- MSE), coupled to comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (GC x GC/TOFMS) has been developed for the characterization of volatile and semi-volatile compounds in crude oils. In the sample pretreatment process, the analytes were carried to the microsyringe barrel by inert gas, and at the same time, trapped by an organic solvent. The whole process of extraction takes less than 10 min, and only 20 μL of organic solvent was needed. Using two custom standard solutions containing alkanes and polycyclic aromatic hydrocarbons (PAHs), the influences of the extraction conditions were investigated. The optimized conditions were as follows: 5 mg crude oil, 20 μL hexane (extraction solvent), extraction for 3 min at 300 °C, condensation temperature set at -2 °C, gas flow rate set at 2 mL/min. Under the optimized conditions, a real crude oil sample was extracted and then analyzed in detail. It showed that the proposed method was very effective in simultaneously analyzing the normal and branched alkanes, cycloalkanes, aromatic hydrocarbons, and biomarkers of crude oil such as steranes and terpanes. The recoveries obtained ranged from 82.0% to 107.3% and the detection limits ranged from 34 to 93 μg/L. The correlation coefficients (R2) were more than 0.99. The relative standard deviations (RSDs, n = 5) for all the analytes were below 10%. The results indicate that the proposed method is suitable for the characterization of volatile and semi-volatile compounds in crude oils with easy operation, high sensitivity and efficiency.

Abundant geochemical information can be acquired by analyzing the chemical compositions of petroleum geological samples. The information obtained from the analysis provides scientifical evidences for petroleum exploration. However, these samples are complicated and can be easily influenced by physical (e. g. evaporation, emulsification, natural dispersion, dissolution and sorption), chemical (photodegradation) and biological (mainly microbial degradation) weathering processes. Therefore, it is very difficult to analyze the petroleum geological samples and they cannot be effectively separated by traditional gas chromatography/mass spectrometry. A newly developed separation technique, comprehensive two-dimensional gas chromatography (GC x GC), has unique advantages in complex sample analysis, and recently it has been applied to petroleum geological samples. This article mainly reviews the research progres- ses in the last five years, the main problems and the future research about GC x GC applied in the area of petroleum geology.

A simple and efficient method to analyze the volatile and semivolatile organic compounds in crude oils has been developed based on direct immersion solid-phase microextraction coupled to comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (DI-SPME-GC × GC/TOFMS). A novel fiber, multiwalled carbon nanotubes/hydroxyl-terminated silicone oil (MWNTs-TSO-OH), was prepared by sol-gel technology. Using standard solutions, the extraction conditions were optimized such as extraction mode, extraction temperature, extraction time, and salts effect. With the optimized conditions, a real crude oil sample was extracted and then analyzed in detail. It shows that the proposed method is very effective in simultaneously analyzing the normal and branched alkanes, cycloalkanes, aromatic hydrocarbons, and biomarkers of crude oil such as steranes and terpanes. Furthermore, the method showed good linearity (r > 0.999), precision (RSD < 8%), and detection limits ranging from 0.2 to 1.6 ng/L.