Search

Using sensing devices for noncontact information transfer enhances data security in human‐machine interaction by eliminating direct contact between the information carrier and the communication interface. However, current contactless information transfer strategies struggle with complex application scenarios due to limitations in sensing mechanisms. Here, this work proposes an innovative noncontact information transfer approach that leverages invisible thermal radiation and the Seebeck effect, and demonstrates its feasibility by designing a high‐resolution temperature sensor based on a laminar thermoelectric aerogel of carbon nanotube/PEDOT:PSS/nanocellulose. The sensor exhibits exceptional sensitivity, ultralow detection limits (0.02 K), rapid response time, and reliable cycling stability in temperature detection without interference from pressure stimuli. This work further presents a sensor array‐based communication interface capable of extracting, decoding, and transmitting high‐capacity encrypted information contactlessly. The interface also serves as a contactless input terminal for precisely monitoring finger movements. Additionally, the sensor can convert pressure into resistance signals, functioning as tactile electronic skin in contact scenarios. This study presents a dependable strategy for transmitting information without physical contact, contributing to the development of future integrated devices. [ABSTRACT FROM AUTHOR]

To alleviate resource shortage and environmental pollution, solar energy can be converted into thermal energy stored in phase change materials and in turn generate electrical energy. To enhance the solar energy utilization efficiency of solar‐thermal‐electrical conversion devices and prevent the heat loss to the environment at night, an intelligent solar‐responsive phase‐change system is innovatively designed consisting of a graphene aerogel film/paraffin wax stamen with an ultra‐high thermal conductivity of 46.7 W m−1 K−1, and thermally preserving aerogel film/liquid crystal elastomer bilayer petals that can bend solar‐responsively by the synergistic effect of solar‐thermal energy conversion and heat‐induced contraction. The solar‐responsive phase‐change system achieves daytime blooming for solar‐thermal conversion with simultaneous energy storage and nighttime closing for minimizing heat loss to the environment, exhibiting a high solar‐thermal conversion and energy storage efficiency of 89.4% and delaying its temperature drop by the thermal preservation effect of the petals. The assembled solar‐responsive solar‐thermal‐electric generator can reach an output voltage of 1033.8 mV at a light intensity of 500 mW cm−2 and continue to generate electrical energy during nighttime, holding tremendous promise in efficient solar energy conversion, storage, and utilization. [ABSTRACT FROM AUTHOR]

Solar‐driven steam generation has emerged as a sustainable technology for addressing freshwater scarcity. However, significant challenges still exist in developing high‐performance, multifunctional evaporators that are adept at both efficiently evaporating water and degrading pollutants, primarily because of the trade‐offs among functional designs. Here, a self‐floating solar evaporator is reported by functionalizing balsa wood with solar‐thermal conversion material carbon nanotubes and catalytic manganese dioxide (MnO2) nanoflowers for simultaneous solar evaporation and pollutant degradation. MnO2 nanoflowers are rich in oxygen vacancies that can effectively activate peroxymonosulfate to generate reactive oxygen species for efficient organic pollutant degradation. A distinctive non‐wetted porous interior structure and a precisely targeted water pathway are spontaneously established in the multifunctional evaporator, ensuring fast water supply, thermal insulation, efficient mass transfer, and high buoyancy. The resulting evaporators successfully combine an impressive evaporation rate of 2.74 kg m−2 h−1, a high pollutant degradation efficiency (98.3% for 100 mg L−1 tetracycline and 97.4% for 200 mg L−1 Methyl orange), and stable self‐floating and self‐standing capabilities that ensure long‐term operation stability even in complex real‐world environments. This work provides an approach to design multifunctional solar evaporators, ensuring strong alignment with practical requirements while expanding their potential application scenarios. [ABSTRACT FROM AUTHOR]

Although skin-like sensors that can simultaneously detect various physical stimuli are of fair importance in cutting-edge human-machine interaction, robotic, and healthcare applications, they still face challenges in facile, scalable, and cost-effective production using conventional active materials. The emerging two-dimensional transition metal carbide, Ti 3 C 2 T x MXene, integrated with favorable thermoelectric properties, metallic-like conductivity, and a hydrophilic surface, is promising for solving these problems. Herein, skin-like multifunctional sensors are designed to precisely detect and distinguish temperature and pressure stimuli without cross-talk by decorating elastic and porous substrates with MXene sheets. Because the combination of the thermoelectric and conductive MXene with the thermally insulating, elastic, and porous substrate integrates efficient Seebeck and piezoresistive effects, the resultant sensor exhibits not only an ultralow detection limit (0.05 K), high signal-to-noise ratio, and excellent cycling stability for temperature detection but also high sensitivity, fast response time, and outstanding durability for pressure detection. Based on the impressive dual-mode sensing properties and independent temperature and pressure detections, a multimode input terminal and an electronic skin are created, exhibiting great potential in robotic and human-machine interaction applications. This work provides a scalable fabrication of multifunctional tactile sensors for precisely detecting and distinguishing temperature and pressure stimuli.

Aim: To evaluate the effect of long-term weightlessness on retina and optic nerve in tail-suspension (TS) rats., Methods: A stimulated weightlessness model was established by suspending rats' tail. After 12wk, the ultrastructure and the number of optic nerve axons were observed by transmission electron microscope. The number of survival retinal ganglion cells (RGCs) was calculated by fluorescent gold retrograde labeling. Retina cells apoptosis was detected by TUNEL staining. The function of optic nerve and retina was evaluated by the visual evoked potential (VEP) and oscillatory potentials (Ops)., Results: The optic nerve axons were swollen and sparsely aligned, and the lamellar separation and myelin disintegration occurred after 12wk in TS rats. The density of optic nerve axons was 32.23±3.92 (vs 37.43±4.13, P=0.0145), the RGCs density was 1645±46 cells/mm(2) (vs 1867±54 cells/mm(2) P=0.0000), the incidence rate of retinal cells apoptosis was 5.38%±0.53% (vs 4.75%±0.54%, P=0.0238), the amplitude of VEP-P100 was 15.43±2.14 µV (vs 17.67±2.17 µV, P=0.0424), the latency of VEP-P100 was 69.05±5.34ms (vs 62.43±4.87ms P=0.0143) and the sum amplitude of Ops was 81.05±8.34 µV (vs 91.67±10.21 µV, P=0.0280) in TS group and the control group, respectively., Conclusion: Long-term weightlessness can induce the ultrastructural changes and functional depress of the optic nerve, as well as retinal cell damages in TS rats.

Aim: To record multifocal electroretinogram from different dosage of N(2)O(4) injected mice. In order to provide a foundation for further study., Methods: Normal winstar mice which were injected by different dosage of N(2)O(4) were studied for recording multifocal electroretinogram in the same time in the evening after N(2)O(4) injection., Results: The latency and amplitude density of "b" wave of each ring of multifocal electroretinogram was studied. The latency of "b" wave of each ring of multifocal electroretinogram of each group varies to each other. But the difference of the amplitude of "b" wave of multifocal electroretinogram of each ring between each group had no significance., Conclusion: Recording multifocal electroretinogram of N(2)O(4) injected mice will give more support for further study in related science and clinic research.