Search

Beta-phase gallium oxide ($\beta$-Ga$_2$O$_3$) research has gained accelerated pace due to its superiorly large bandgap and commercial availability of large-diameter native substrates. However, the high acceptor activation energy obstructs the development of homojunction bipolar devices employing $\beta$-Ga$_2$O$_3$. The recently demonstrated semiconductor grafting technique provides an alternative and viable approach towards lattice-mismatched $\beta$-Ga$_2$O$_3$-based p-n heterojunctions with high quality interfaces. Understanding and quantitatively characterizing the band alignment of the grafted heterojunctions is crucial for future bipolar device development employing the grafting method. In this work, we present a systematic study of the band alignment in the grafted monocrystalline Si/$\beta$-Ga$_2$O$_3$ heterostructure by employing X-ray photoelectron spectroscopy (XPS). The core level peaks and valence band spectra of the Si, $\beta$-Ga$_2$O$_3$, and the grafted heterojunction were carefully obtained and analyzed. The band diagrams of the Si/$\beta$-Ga$_2$O$_3$ heterostructure were constructed using two individual methods, the core level peak method and the valence band spectrum method, by utilizing the different portions of the measured data. The reconstructed band alignments of the Si/$\beta$-Ga$_2$O$_3$ heterostructure using the two different methods are identical within the error range. The band alignment is also consistent with the prediction from the electron affinity values of Si and $\beta$-Ga$_2$O$_3$. The study suggests that the interface defect density in grafted Si/$\beta$-Ga$_2$O$_3$ heterostructure is at a sufficiently low level such that Fermi level pinning at the interface has been completely avoided and the universal electron affinity rule can be safely employed to construct the band diagrams of grafted monocrystalline Si/$\beta$-Ga$_2$O$_3$ heterostructures., Comment: 18 pages, 5 figures

In this work, we report the fabrication and characterizations of a monocrystalline GaAs/$\beta$-Ga$_2$O$_3$ p-n heterojunction by employing semiconductor grafting technology. The heterojunction was created by lifting off and transfer printing a p-type GaAs single crystal nanomembrane to an Al$_2$O$_3$-coated n-type$\beta$-Ga$_2$O$_3$ epitaxial substrate. The resultant heterojunction diodes exhibit remarkable performance metrics, including an ideality factor of 1.23, a high rectification ratio of 8.04E9 at +/- 4V, and a turn on voltage of 2.35 V. Furthermore, at +5 V, the diode displays a large current density of 2500 A/cm$^2$ along with a low ON resistance of 2 m$\Omega\cdot$cm$^2$., Comment: 14 pages, 5 figures

Beta phase gallium oxides, an ultrawide-bandgap semiconductor, has great potential for future power and RF electronics applications but faces challenges in bipolar device applications due to the lack of p-type dopants. In this work, we demonstrate monocrystalline AlGaAs_GaAsP_beta phase gallium oxides n-p-n double-heterojunctions, synthesized using semiconductor grafting technology. By transfer printing an n-AlGaAs_p-GaAsP nanomembrane to the n-beta phase-Ga$_2$O$_3$ epitaxial substrate, we simultaneously achieved AlGaAs_GaAsP epitaxial n-p junction diode with an ideality factor of 1.29 and a rectification ratio of 2.57E3 at +/- 2 V, and grafted GaAsP_beta_phase_gallium oxides p-n junction diode exhibiting an ideality factor of 1.36 and a rectification ratio of 4.85E2 at +/- 2 V., Comment: 12 pages, 4 figures

As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the black-body radiation limit at ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9 W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflection in the mid-infrared spectral region. With this configuration, both sides of a planar thermal emitter can be used to perform radiative cooling and a record cooling power density beyond 280 W/m2 was realized in a single thin-film thermal emitter. Under the standard pressure, we realized a temperature reduction of 14 degree Celsius below the ambient temperature in the laboratory environment, and over 12 degree Celsius in the outdoor test., Comment: 17 pages, 4 figures

Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thin film structure fabricated using fast solution coating process that is scalable for large area manufacturing. By manipulating the beaming effect of the thermal radiation, temperature reduction of 9.5 {\deg}C and 11.0 {\deg}C were demonstrated in the laboratory and out-door environment, respectively. In addition, a spectral-selective solar shelter architecture was designed and implemented to suppress the solar input during the daytime. Due to the enhanced directionality of the thermal emission, the dependence of the radiative cooling performance on the surrounding environment was minimized. Out-door experiments were performed in Buffalo NY, realizing continuous all-day radiative cooling with an average power of ~120 W/m2 on a typical clear sunny day at Northern United States latitudes. This practical passive cooling strategy that cools without any electricity input could have a significant impact on global energy consumption., Comment: 11 pages, 5 figures

Enhancing light absorption in the recording media layer can improve the energy efficiency and prolong the device lifetime in heat assisted magnetic recording (HAMR). In this work, we report the design and implementation of a resonant nanocavity structure to enhance the light-matter interaction within an ultrathin FePt layer. In a Ag/SiO2/FePt trilayer structure, the thickness of the dielectric SiO2 layer is systematically tuned to reach maximum light absorption at the wavelength of 830 nm. In the optimized structure, the light reflection is reduced by more than 50%. This results in effective laser heating of the FePt layer, as imaged by an infrared camera. The scheme is highly scalable for thinner FePt layers and shorter wavelengths to be used in future HAMR technologies., Comment: 15 pages, 6 figures

Vapor condensation plays a crucial role in solar water-purification technologies. Conventional condensers in solar water-purification systems do not provide sufficient cooling power for vapor condensation, limiting the water production rate to $0.4 L m^{-2} hour^{-1}$. On the other hand, radiative dew condensation, a technique used by existing radiative dew condensers, only works at nighttime and is incompatible with solar water-purification technologies. Here, we develop daytime radiative condensers that reflect almost all solar radiation, and can thus create dew water even in direct sunlight. Compared to state-of-art condensers, our daytime radiative condenser doubles the production of purified water over a 24-hour period. The integration of our daytime radiative condenser with solar water-purification systems can increase the water production rate in sunlight from $0.4 L m^{-2} hour^{-1}$ to more than $1 L m^{-2} hour^{-1}$.

In the last few decades, the development of miniature biological sensors that can detect and measure different phenomena at the nanoscale has led to transformative disease diagnosis and treatment techniques. Among others, biofunctional Raman nanoparticles have been utilized in vitro and in vivo for multiplexed diagnosis and detection of different biological agents. However, existing solutions require the use of bulky lasers to excite the nanoparticles and similarly bulky and expensive spectrometers to measure the scattered Raman signals, which limit the practicality and applications of this nano-biosensing technique. In addition, due to the high path loss of the intra-body environment, the received signals are usually very weak, which hampers the accuracy of the measurements. In this paper, the concept of cooperative Raman spectrum reconstruction for real-time in vivo nano-biosensing is presented for the first time. The fundamental idea is to replace the single excitation and measurement points (i.e., the laser and the spectrometer, respectively) by a network of interconnected nano-devices that can simultaneously excite and measure nano-biosensing particles. More specifically, in the proposed system a large number of nanosensors jointly and distributively collect the Raman response of nano-biofunctional nanoparticles (NBPs) traveling through the blood vessels. This paper presents a detailed description of the sensing system and, more importantly, proves its feasibility, by utilizing accurate models of optical signal propagation in intra-body environment and low-complexity estimation algorithms. The numerical results show that with a certain density of NBPs, the reconstructed Raman spectrum can be recovered and utilized to accurately extract the targeting intra-body information.

We report the first experimental observation of trapped rainbow1 in graded metallic gratings2-4, designed to validate theoretical predictions for this new class of plasmonic structures. One-dimensional tapered gratings were fabricated and their surface dispersion properties tailored by varying the grating period and depth, whose dimensions were confirmed by atomic force microscopy. Reduced group velocities and the plasmonic bandgap were observed. Direct measurements on graded grating structures show that light of different wavelengths in the 500-700nm region is "trapped" at different positions along the grating, consistent with computer simulations, thus verifying the "rainbow" trapping effect. The trapped rainbow effect offers exciting pathways for optical information storage and optical delays in photonic circuits at ambient temperature.