Search

Abstract: A key objective of Stage 2 of the CO2CRC Otway Project is to explore the ability of geophysical methods to detect and monitor injection of greenhouse gas into a saline formation. For this purpose, injection o f some 10,000 30,000 tonnes of CO2-rich mixture into the Paaratte formation, a saline aquifer located at a depth of about 1,400 m, is planned. Before such an injection experiment is undertaken, we assess the feasibility of geophysical monitoring using computer modelling. To examine the detectability of the plume we need to estimate the time-lapse signal and time- lapse noise. The time lapse signal is modelled using flow simulations, fluid substitution and seismic forward modelling. In order to assess the applicability of time-lapse seismic to monitor the injection, the predicted signal is compared to the time-lapse noise level from the recent 4D seismic survey acquired at the Otway site in 2009-2010. The methodology is applied to two alternative reservoir intervals located at a depth of 1392-1399 m and 1445-1465 m below the sea level, respectively. These intervals are considered to be the two possible options for the injection. The results show that injection into the lower interval will produce a plume of a larger thickness and smaller lateral extent, and a seismic response that is more likely to be detectable. The developed feasibility assessment workflow, and the results of its application to the Otway site, can be used to assess the ability of seismic methods to detect and monitor greenhouse gas leakage in other CCS projects. [Copyright &y& Elsevier]

The dependence of shear-wave splitting in fractured reservoirs on the properties of the filling fluid may provide a useful attribute for identifying reservoir fluids. If the direction of wave propagation is not perpendicular or parallel to the plane of fracturing, the wave polarized in the plane perpendicular to the fractures is a quasi-shear mode, and therefore the shear-wave splitting will be sensitive to the fluid bulk modulus. The magnitude of this sensitivity depends upon the extent to which fluid pressure can equilibrate between pores and fractures during the period of the deformation. In this paper, we use the anisotropic Gassmann equations and existing formulations for the excess compliance due to fracturing to estimate the splitting of vertically propagating shear waves as a function of the fluid modulus for a porous medium with a single set of dipping fractures and with two conjugate fracture sets, dipping with opposite dips to the vertical. This is achieved using two alternative approaches. In the first approach, it is assumed that the deformation taking place is quasi-static: that is, the frequency of the elastic disturbance is low enough to allow enough time for fluid to flow between both the fractures and the pore space throughout the medium. In the second approach, we assume that the frequency is low enough to allow fluid flow between a fracture set and the surrounding pore space, but high enough so that there is not enough time during the period of the elastic disturbance for fluid flow between different fracture sets to occur. It is found that the second approach yields a much stronger dependence of shear-wave splitting on the fluid modulus than the first approach. This is a consequence of the fact that at higher wave frequencies there is not enough time for fluid pressure to equilibrate and therefore the elastic properties of the fluid have a greater effect on the magnitude of the shear-wave splitting. [ABSTRACT FROM AUTHOR]