Search

Pomace, a waste product, generates a huge problem in the fruit and vegetable industry. Numerous studies prove that pomace and fibre are valuable sources of many nutrients. Due to their properties, their popularity is growing in many industries. Water vapour isotherms and kinetics were determined for selected fruit fibre and pomace. The activity and water content, colour, apparent and bulk density, and material structure were also investigated. In addition, the thermal stability of the tested fibres and pomace was examined. Fibre and pomace from chokeberries, apples and currants were used in the research. The determined kinetic curves proved that apple fibre absorbed more water vapour. The isotherms were found to have a shape characteristic of type III sorption isotherms. The Guggenheim–Anderson–de Boer model (GAB) described experimental data for sorption isotherms well (taking an RMS value of less than 10% as a good fit of the model to the sorption data). Thermogravimetric analysis showed good thermal stability, and all analysed fruit fibre and pomace showed similar behaviour in the three main stages of weight loss. The results suggest that the analysed waste materials can be used for different applications, including flour replacements for food products or filling materials in edible packaging films. [ABSTRACT FROM AUTHOR]

Copyright of Zywnosc is the property of Polish Society of Food Technologists - Scientific Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Featured Application: The developed edible coatings and films can be used as an alternative to plastic packaging and additionally increase the attractiveness of the product. The use of an appropriate coating composition obtains high-quality freeze-dried vegetable bars. The aim of this study was to analyze the selected physical properties of vegetable bars coated with a coating based on pork gelatin (8% or 12%) with (25% or 50%) or without vegetable broth. The scope of work included developing the composition of edible coatings; preparing bars and coating freeze-dried vegetable bars; analyzing the water activity, dry matter content, the structure of vegetable bars based on microscopic analysis, and porosity; and then conducting a comparative analysis of the obtained results. The analyses show that the composition of the coating and the coating method influence the structure and selected physical properties of freeze-dried bars. Coating freeze-dried vegetable bars increases their water activity to the range of 0.215–0.389, and reduces their dry matter content to 93–96%. The porosity of the samples decreased (85–91%), but the use of coatings in the form of an edible film was more beneficial than immersing the dried material in a film-forming solution. The addition of vegetable broth to edible films improves the physical properties of the dried fruit and may additionally increase the taste of vegetable bars. [ABSTRACT FROM AUTHOR]

The study aimed to evaluate the effect of storage temperature on quality changes in freeze-dried carrot–orange–ginger (COG) snacks obtained with 2% of apple (AP) or blackcurrant (BP) pomace powder or 1.5% of pectin (LMP). The material was stored at 4, 25 and 40 °C for 1, 3, 6 and 12 months in pouches impermeable to vapour, oxygen and light. Water content and activity, texture, colour, total polyphenol content and antioxidant activity were examined to evaluate the products' quality. During storage, water content and activity fluctuations were noted, but no critical values were exceeded. Texture properties remained stable in snacks with pomace powders compared to those with pectin, the hardness of which significantly decreased when stored at ambient and elevated temperatures. However, the product with pectin was found to change colour the least over time. The results obtained for chemical properties were not clear, but they strongly indicated the occurrence of the transformation of some chemical compounds. Overall, a lowered temperature helped to maintain the quality of the freeze-dried snacks for the longest time. The presented research contributes to the general knowledge of the behaviour of innovative products with the addition of nonconventional but sustainable compounds, revealing the potential for quality and stability improvements. [ABSTRACT FROM AUTHOR]

This work aimed to develop gluten-free snacks such as crispbread based on beetroot pomace (Beta vulgaris L.) and golden linseed (Lini semen). Beetroot is attracting more and more consumer attention because of its nutritional and health properties. The use of beet pomace contributes to waste management. Linseed, known as a superfood with many health-promoting properties, was used to produce crispbreads as an alternative to cereals, which are allergens. Beetroot pomace and whole or ground linseed were used in different proportions to produce crispbread snacks. Chemical and physical analyses were performed including water activity, dry matter, betalains, and polyphenols content, as well as Fourier transform infrared spectroscopy (FTIR). A sensory evaluation and microstructure observations were also performed. The obtained snacks were characterized by low water activity (0.290–0.395) and a high dry matter content (93.43–97.53%), which ensures their microbiological stability and enables longer storage. Beetroot pomace provided betalains—red (14.59–51.44 mg betanin/100 g d.m.) and yellow dyes (50.02–171.12 mg betanin/100 g d.m.)—while using linseed enriched the product with polyphenols (730–948 mg chlorogenic acid/100 g d.m.). FTIR analysis showed the presence of functional groups such as the following: -OH, -C-O, -COOH, and -NH. The most desired overall consumer acceptability was achieved for snacks containing 50% beetroot pomace and 50% linseed seeds. The obtained results confirmed that beetroot pomace combined with linseed can be used in the production of vegetable crispbread snacks. [ABSTRACT FROM AUTHOR]

Edible hydrogel coatings or films in comparison to conventional food packaging materials are characterized as thin layers obtained from biopolymers that can be applied or enveloped onto the surface of food products. The use of lipid-containing hydrogel packaging materials, primarily as edible protective coatings for food applications, is recognized for their excellent barrier capacity against water vapor during storage. With the high brittleness of waxes and the oxidation of different fats or oils, highly stable agents are desirable. Jojoba oil obtained from the jojoba shrub is an ester of long-chain fatty acids and monovalent, long-chain alcohols, which contains natural oxidants α, β, and δ tocopherols; therefore, it is resistant to oxidation and shows high thermal stability. The production of hydrogel films and coatings involves solvent evaporation, which may occur in ambient or controlled drying conditions. The study aimed to determine the effect of drying conditions (temperature from 20 to 70 °C and relative humidity from 30 to 70%) and jojoba oil addition at the concentrations of 0, 0.5, 1.0, 1.5, and 2.0% on the selected physical properties of hydrogel edible films based on whey protein isolate. Homogenization resulted in stable, film-forming emulsions with bimodal lipid droplet distribution and a particle size close to 3 and 45 µm. When higher drying temperatures were used, the drying time was much shorter (minimum 2 h for temperature of 70 °C and relative humidity of 30%) and a more compact structure, lower water content (12.00–13.68%), and better mechanical resistance (3.48–3.93 MPa) of hydrogel whey protein films were observed. The optimal conditions for drying hydrogel whey protein films are a temperature of 50 °C and an air humidity of 30% over 3 h. Increasing the content of jojoba oil caused noticeable color changes (total color difference increased from 2.00 to 2.43 at 20 °C and from 2.58 to 3.04 at 70 °C), improved mechanical elasticity (the highest at 60 °C from 48.4 to 101.1%), and reduced water vapor permeability (the highest at 70 °C from 9.00·10−10 to 6.35·10−10 g/m·s·Pa) of the analyzed films. The observations of scanning electron micrographs showed the heterogeneity of the film surface and irregular distribution of lipid droplets in the film matrix. [ABSTRACT FROM AUTHOR]

Crispbread is gaining popularity as a healthy snack or bread substitute. This is a lightweight dry type of flat food that stays fresh for a very long time due to its lack of water and usually contains different types of grain flour, including gluten-containing wheat or rye flour. The incorporation of legume purée into crispbread represents an innovative approach to enhancing the nutritional profile and taste of the product. The rheological properties of various legume purées (chickpea, white bean, black bean, and red bean) mixed with citrus pectin were examined, revealing significant differences in fluid behavior and viscosity. Crispbread formulations were analyzed for water content and activity, color, structure, FT-IR spectra, water vapor adsorption isotherms, and sensory evaluation. The results showed the possibility of obtaining crispbread based on the purée of legumes and citrus pectin. Crispbread enriched with red bean purée exhibited low water activity (0.156) and water content (3.16%), along with a continuous porous structure, and received the highest sensory evaluation score among the products. These findings can be treated as a basis for the development of other innovative recipes and combinations using legumes. [ABSTRACT FROM AUTHOR]

The aim of this work was to develop edible films derived from gelatin and beef broth and to analyze the physical properties of the output products. The presented research is important from the point of view of searching for food packaging solutions that may replace traditionally used plastic packaging. This study's conceptual framework is in line with the trend of sustainable development and zero waste. This study was conducted to develop a recipe for edible films derived from beef gelatin with gelatin concentrations at 4%, 8%, and 12% enriched with additions of beef broth in amounts of 25, 50, 75, and 100%. Selected physical properties of the output edible films were examined in terms of thickness, swelling in water, opacity, water content, water solubility, structure, and mechanical properties. The conducted research made it plausible to conclude that the addition of broth has a positive effect on the extensibility of the edible films and the other physical properties under consideration, especially on decreasing the film thickness, which was found to vary between 50.2 and 191.6 µm. When gelatin and broth were added at low concentrations, the tensile strength of the films increased, and subsequently decreased; however, an opposite effect was observed for elongation at break. The increased broth concentration caused the film opacity to increase from 0.39 to 4.54 A/mm and from 0.18 to 1.04 A/mm with gelatin concentrations of 4% and 12%, respectively. The water solubility of the gelatin films decreased as a result of the broth addition. However, it was noticed that increasing the content of broth caused the water solubility to increase in the tested films. The mere presence of broth in the gelatin films changed the microstructure of the films and also made them thinner. [ABSTRACT FROM AUTHOR]

BACKGROUND: This study aimed to determine the effect of various amounts of dried apple pomace (AP) powder and calcium ions on selected physicochemical properties of restructured freeze‐dried snacks in comparison with products obtained with low‐methoxyl pectin (LMP). The material was prepared using frozen carrot, orange concentrate, ginger, water, and various concentrations of AP (1, 3, 5%) and calcium lactate (0, 0.01, 0.05%). The reference samples were without additives, and with 0.5 or 1.5% of LMP combined with 0.01% of calcium lactate. RESULTS: The material was studied in terms of water content and activity, hygroscopic properties, structure, texture, color, and polyphenol content (TPC), and antioxidant activity. The addition of AP resulted in reducing water activity and porosity. As a consequence of the increasing density of the structure, the reduction of hygroscopic properties by up to 16% followed the increasing amount of AP. Apple pomace and calcium ions strengthened the structure. The addition of 3% and 5% of AP gave a hardening effect close to or better than 0.5% LMP. Because of the pigment dilution, LMP caused significantly greater total color change than AP. The incorporation of AP also increased TPC and enhanced antioxidant activity in comparison with the reference materials by up to 18%. CONCLUSION: The results showed that dried AP powder can be applied successfully as an additive enhancing stability, texture and bioactive compound content, thus fortifying the physicochemical properties of restructured freeze‐dried fruit and vegetable snacks. © 2023 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Highly methylated apple pectin (HMAP) and pork gelatin (PGEL) have been proposed as gelling agents for pumpkin purée-based films. Therefore, this research aimed to develop and evaluate the physiochemical properties of composite vegetable films. Granulometric analysis of film-forming solutions showed a bimodal particle size distribution, with two peaks near 25 µm and close to 100 µm in the volume distribution. The diameter D4.3, which is very sensitive to the presence of large particles, was only about 80 µm. Taking into account the possibility of creating a polymer matrix from pumpkin purée, its chemical characteristic was determined. The content of water-soluble pectin was about 0.2 g/100 g fresh mass, starch at the level of 5.5 g/100 g fresh mass, and protein at the level of about 1.4 g/100 g fresh mass. Glucose, fructose, and sucrose, the content of which ranged from about 1 to 1.4 g/100 g fresh mass, were responsible for the plasticizing effect of the purée. All of the tested composite films, based on selected hydrocolloids with the addition of pumpkin purée, were characterized by good mechanical strength, and the obtained parameters ranged from about 7 to over 10 MPa. Differential scanning calorimetry (DSC) analysis determined that the gelatin melting point ranged from over 57 to about 67 °C, depending on the hydrocolloid concentration. The modulated differential scanning calorimetry (MDSC) analysis results exhibited remarkably low glass transition temperature (Tg) values, ranging from −34.6 to −46.5 °C. These materials are not in a glassy state at room temperature (~25 °C). It was shown that the character of the pure components affected the phenomenon of water diffusion in the tested films, depending on the humidity of the surrounding environment. Gelatin-based films were more sensitive to water vapor than pectin ones, resulting in higher water uptake over time. The nature of the changes in water content as a function of its activity indicates that composite gelatin films, with the addition of pumpkin purée, are characterized by a greater ability to adsorb moisture from the surrounding environment compared to pectin films. In addition, it was observed that the nature of the changes in water vapor adsorption in the case of protein films is different in the first hours of adsorption than in the case of pectin films, and changes significantly after 10 h of the film staying in an environment with relative humidity RH = 75.3%. The obtained results showed that pumpkin purée is a valuable plant material, which can form continuous films with the addition of gelling agents; however, practical application as edible sheets or wraps for food products needs to be preceded with additional research on its stability and interactions between films and food ingredients. [ABSTRACT FROM AUTHOR]

The work aimed to investigate the rheological properties and the gelling process of selected film-forming solutions obtained based on hydrocolloids, such as sodium alginate, highly methylated pectin, and soy protein isolate with the addition of pumpkin purée. It was found that both concentration of hydrocolloid and the addition of pumpkin purée affected the rheological parameters. The non-linear nature of the flow curves was demonstrated, which allowed the curves to be described using the Ostwald de Waele model. The addition of pumpkin purée and the concentration of the structure-forming substance affected the apparent viscosity of the composite film-forming solutions. Considering the applied parameters, only the gelation temperature of composite gelatin film-forming solutions with the addition of pumpkin purée was possible to determine. Additionally, degassing of the solutions with the addition of pumpkin purée resulted in the reduction of the aeration degree and smoothening of the edible films' surface. [ABSTRACT FROM AUTHOR]

The main research objective of the work was to demonstrate that the low-temperature sous-vide method allows obtaining a culinary product with selected physical, chemical, microbiological, and sensory properties that are more favorable compared to the corresponding features of the product obtained by conventional methods used in closed-type mass catering establishments, with the example of chicken breast. In addition, the aim was to demonstrate higher storage stability of culinary samples of chicken breast prepared by the sous-vide technique compared to samples prepared by conventional methods. The results confirm that the sous-vide method allows obtaining a product with the expected physical and chemical properties, comparable or even better with samples obtained by heat treatment methods, provided that high-quality raw materials and a high level of hygiene in the production process are used. Implementation of the innovative sous-vide method allows for extending the gastronomic offer of closed-type mass catering establishments with microbiologically safe dishes, desirable in sensory evaluation and stable during storage, which also allows for reducing the loss of prepared meals. [ABSTRACT FROM AUTHOR]

Multigrain bars can contain ingredients recommended in daily diets, which are nutritious and beneficial to human health; without white sugar, "harmful" fats, and synthetic additives. This review describes the current nutritional trends in the consumption of snacks and characterizes the most important groups of raw materials for the composition of bars. Many plant materials can be used for the production of multigrain bars, including cereals and their products, oilseeds, nuts, fruit, vegetables, and plant waste, which are primarily a source of fiber, but also other compounds with antioxidant properties. The binding component may be honey, malt extract, fruit or vegetable juice, or purée. Attention was paid to the microbiological quality of the raw materials and their influence on the sensory characteristics of the bars. The pro-health and technological role of fiber is emphasized. In addition to providing nutritionally balanced snacks, these raw materials can be used to shape sensory properties such as color, flavor, aroma, and texture. The most important methods of making bars are indicated. In addition to the common extrusion and baking processes, the use of different drying methods to produce multigrain bars in combination with a wide recipe range can help expand the market for multigrain snack bars. [ABSTRACT FROM AUTHOR]