Search

The effective procedure for activating muscles and improving movements in individuals who have a central nervous system injury is Functional electrical stimulation (FES). To have accurate movements of the limbs, appropriate stimulation patterns should be generated and exerted on the muscles. The challenging problem is the redundancy in the musculoskeletal system that makes it necessary to use optimal control to derive muscle activations. For doing this, the redundant musculoskeletal model of the ankle joint is derived in this paper, then an optimal control method for estimating muscle activation during the gait cycle is designed. The aim of optimal control theory is to minimize the cost function, including muscle activation as the control input and joint angle tracking error as the output of the model. Two optimal control algorithms are implemented in this research. These approaches present direct and indirect control methods to solve the optimization problem of ankle movement achieved by experimental research on two healthy males during the gait cycle. Based on the results, the direct method is smoother for nonlinear systems and estimates desired muscle activation more precisely and the cost function coefficients are chosen with logical and less values in comparison to the indirect method.

Total ankle arthroplasty (TAA) is a motion-preserving treatment for end-stage ankle arthritis. An effective tool for analyzing these implants’ mechanical performance and longevity in silico is finite element analysis (FEA). An FEA in ABAQUS was used to statically analyze the mechanical behavior of the ultra-high-molecular-weight polyethylene (UHMWPE) bearing component at varying dorsiflexion/plantarflexion ankle angles and axial loading conditions during the stance phase of the gait cycle for a single cycle. The von Mises stress and contact pressure were examined on the articulating surface of the bearing component in two newly installed fixed-bearing TAA implants (Wright Medical INBONE II and Exactech Vantage). Six different FEA models of variable ankle compressive load levels and ankle angle positions, for the varying subphases of the stance phase of the gait cycle, were created. The components in these models were constrained to be conducive to the bone–implant interface, where implant loosening occurs. Our results showed that the von Mises stress and contact pressure distributions increased as the compressive load increased. The highest stress was noted at dorsiflexion angles > 15°, in areas where the UHMWPE liner was thinnest, at the edges of the talar and UHMWPE components, and during the terminal stance phase of the gait cycle. This static structural analysis highlighted these failure regions are susceptible to yielding and wear and indicated stress magnitudes that are in agreement (within 25%) with those in previous static structural TAA FEAs. The mechanical wear of the UHMWPE bearing component in TAA can lead to aseptic loosening and peri-implant cyst formation over time, requiring surgical revision. This study provides ankle replacement manufacturers and orthopedic surgeons with a better understanding of the stress response and contact pressure sustained by TAA implants, which is critical to optimizing implant longevity and improving patient care.

Abstract Gait cycle variability during steady walking, described by the stride interval time series, has been used as a gait-stability-related measure. In particular, the positive persistency in the stride intervals with 1/f-like fluctuation and reduction of the persistency are the well-documented metrics that can characterize gait patterns of healthy young adults and elderly including patients with neurological diseases, respectively. Here, we examined effects of a dual task on gait cycle variability in healthy young adults, based on the mean and standard deviation statistics as well as the positive persistency of the stride intervals during steady walking on a treadmill. Specifically, three gait conditions were examined: control condition, non-cognitive task with holding a smartphone in front of the chest using their dominant hand and looking fixedly at a blank screen of the smartphone, and cognitive motor task with holding a smartphone as in the non-cognitive task and playing a puzzle game displayed on the smartphone by one-thumb operation. We showed that only the positive persistency, not the mean and standard deviation statistics, was affected by the cognitive and motor load of smartphone usage in the cognitive condition. More specifically, the positive persistency exhibited in the control and the non-cognitive conditions was significantly reduced in the cognitive condition. Our results suggest that the decrease in the positive persistency during the cognitive task, which might represent the deterioration of healthy gait pattern, is caused endogenously by the cognitive and motor load, not necessarily by the reduction of visual field as often hypothesized.

The ability of humans to coordinate stereotyped, alternating movements between the two legs during bipedal walking is a complex motor behavior that requires precisely timed activities across multiple nodes of the supraspinal network. Understanding of the neural network dynamics that underlie natural walking in humans is limited. We investigated cortical and subthalamic neural activities during overground walking and evaluated spectral biomarkers to decode the gait cycle in three patients with Parkinson's disease without gait disturbances. Patients were implanted with chronic bilateral deep brain stimulation (DBS) leads in the subthalamic nucleus (STN) and electrocorticography paddles overlaying the primary motor and somatosensory cortices. Local field potentials were recorded from these areas while the participants performed overground walking and synchronized to external gait kinematic sensors. We found that the STN displays increased low-frequency (4-12 Hz) spectral power during the period before contralateral leg swing. Furthermore, STN shows increased theta frequency (4-8 Hz) coherence with the primary motor through the initiation and early phase of contralateral leg swing. Additional analysis revealed that each patient had specific frequency bands that could detect a significant difference between left and right initial leg swing. Our findings indicate that there are alternating spectral changes between the two hemispheres in accordance with the gait cycle. In addition, we identified patient-specific, gait-related biomarkers in both the STN and cortical areas at discrete frequency bands that may be used to drive adaptive DBS to improve gait dysfunction in patients with Parkinson's disease.

Total ankle arthroplasty (TAA) is a motion-preserving treatment for end-stage ankle arthritis. An effective tool for analyzing these implants' mechanical performance and longevity in silico is finite element analysis (FEA). An FEA in ABAQUS was used to statically analyze the mechanical behavior of the ultra-high-molecular-weight polyethylene (UHMWPE) bearing component at varying dorsiflexion/plantarflexion ankle angles and axial loading conditions during the stance phase of the gait cycle for a single cycle. The von Mises stress and contact pressure were examined on the articulating surface of the bearing component in two newly installed fixed-bearing TAA implants (Wright Medical INBONE II and Exactech Vantage). Six different FEA models of variable ankle compressive load levels and ankle angle positions, for the varying subphases of the stance phase of the gait cycle, were created. The components in these models were constrained to be conducive to the bone–implant interface, where implant loosening occurs. Our results showed that the von Mises stress and contact pressure distributions increased as the compressive load increased. The highest stress was noted at dorsiflexion angles > 15°, in areas where the UHMWPE liner was thinnest, at the edges of the talar and UHMWPE components, and during the terminal stance phase of the gait cycle. This static structural analysis highlighted these failure regions are susceptible to yielding and wear and indicated stress magnitudes that are in agreement (within 25%) with those in previous static structural TAA FEAs. The mechanical wear of the UHMWPE bearing component in TAA can lead to aseptic loosening and peri-implant cyst formation over time, requiring surgical revision. This study provides ankle replacement manufacturers and orthopedic surgeons with a better understanding of the stress response and contact pressure sustained by TAA implants, which is critical to optimizing implant longevity and improving patient care. [ABSTRACT FROM AUTHOR]

Among older people, walking difficulty results from actual and perceived declines in physical capacities and environmental requirements for walking. We investigated whether the physiological complexity of the gait cycle covaries with experience of walking difficulty. Walking difficulty, gait speed, and gait cycle complexity were evaluated among 702 community-dwelling older people aged 75, 80, and 85 years who took part in the six-minute walking test in the research laboratory. Walking difficulty for 500 m was self-reported. Complexity was quantified as trunk acceleration multiscale entropy during the gait cycle. Complexity was then compared between those with no reported walking difficulty, walking with modifications but no difficulty, and those reporting walking difficulty. Higher entropy differentiated those reporting no difficulty walking from those reporting walking difficulties, while those reporting having modified their walking, but no difficulty formed an intermediate group that could not be clearly distinguished from the other categories. The higher complexity of the gait cycle is associated with slower gait speed and the presence of self-reported walking difficulty. Among older people, gait cycle complexity which primarily reflects the biomechanical dimensions of gait quality, could be a clinically meaningful measure reflecting specific features of the progression of walking decline. This encourages further investigation of the sensitivity of gait cycle complexity to detect early signs of gait deterioration and to support targeted interventions among older people.

Abstract Background Anterior femoral notching (AFN) is a severe complication of total knee replacement (TKR), which in a percentage of patients may lead to fractures after surgery. The purpose of this study was to investigate the stress distribution in patients with AFN and the safety depth of AFN during the gait cycle. Methods We performed a finite element (FE) analysis to analyse the mechanics around the femur during the gait cycle in patients with AFN. An adult volunteer was selected as the basis of the model. The TKR models were established in the 3D reconstruction software to simulate the AFN model during the TKR process, and the 1 mm, 2 mm, 3 mm, 4 mm, and 5 mm AFN models were established, after which the prosthesis was assembled. Three key points of the gait cycle (0°, 22°, and 48°) were selected for the analysis. Results The stress on each osteotomy surface was stable in the 0° phase. In the 22° phase, the maximum equivalent stress at 3 mm was observed. In the 48° phase, with the increase in notch depth, each osteotomy surface showed an overall increasing trend, the stress range was more extended, and the stress was more concentrated. Moreover, the maximum equivalent force value (158.3 MPa) exceeded the yield strength (115.1 MPa) of the femur when the depth of the notch was ≥ 3 mm. Conclusions During the gait cycle, if there is an anterior femoral cortical notch ≥ 3 mm, the stress will be significantly increased, especially at 22° and 48°. The maximum equivalent stress exceeded the femoral yield strength and may increase the risk of periprosthetic fractures.

For time-continuous analysis of gait, the problem of variations in cycle durations is resolved by normalizing to the gait cycle, but results depend on the definition of the cycle start. Gait cycle normalization ignores variations in gait phase durations, which results in averaging and comparing data across different phases. We propose gait phase normalization as part of a comprehensive method for independently analyzing magnitude and timing differences. First, gait phases are identified and differences in absolute and/or relative timing of phase durations or any point of interest between conditions or groups are analyzed using standard statistics. Next, time-continuous gait data is normalized to gait phases, and statistical parametric mapping (SPM) is used to assess magnitude differences in gait data. This approach is demonstrated on data recorded from ten young healthy adults walking on a treadmill at five different speeds. Sagittal knee angle was normalized to gait cycle or gait phase using five different gait cycle start events. Walking at different speeds resulted in significant changes in gait phase durations, highlighting a problem ignored by gait cycle normalization. SPM results for knee angle normalized to gait cycle varied from normalization to gait phases. Gait phase normalized SPM results were robust to the definition of the cycle start, in contrast to gait cycle normalized data. The approach of analyzing phase durations and normalizing data to gait phases overcomes previous limitations and enables a comprehensive analysis of magnitude and timing differences in time-continuous gait data and could be readily adapted to other tasks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: The prevalence of falls among the older population underscores the imperative of comprehending human adaptations to gait perturbations. Dual-belt treadmills offer a controlled setting for such investigations. The purpose of this study was to examine the effect of the acceleration of one belt of the treadmill during three different phases of the gait cycle on kinematic and kinetic parameters and relate these changes to unperturbed gait. Methods: Twenty-one healthy young females walked on a treadmill in a virtual environment, in which five unexpected perturbations were applied to the left belt at the Initial Contact (IC), Mid Stance (MS), and Pre-Swing (PS) phase of the gait cycle. Data from the undisturbed gait and the first disturbance of each trial were extracted for analysis. Results: All perturbations significantly affected the gait pattern, mainly by decreasing the knee extension angle. The perturbation in the IC phase had the most significant effect, resulting in a 248.48% increase in knee flexion torque. The perturbation in the MS phase mainly affected plantar flexion torque, increasing it by 118.18%, while perturbation in the PS phase primarily increased the hip extension torque by 73.02%. Conclusions: The presence of perturbations in the IC and PS phases caused the most aggressive and significant changes in gait parameters.

Objectives: The ankle kinematic characteristics of chronic ankle instability (CAI) at different gait phases and dimensions were not directly and overall explained. These characteristics have yet to be established. This study aimed to observe ankle kinematic changes of CAI, and explore their mechanisms, at different gait phases and dimensions in full gait cycle. Methods: A three-dimensional (3D) motion capture system measured the 3D ankle movements of 53 individuals with CAI (meanage = 25.11 ± 6.01years, meanheight = 170.77 ± 7.80 cm, meanmass = 64.28 ± 9.28 kg) and 53 healthy controls (meanage = 24.66 ± 6.32 years, meanheight = 169.98 ± 9.00 cm, meanmass = 63.11 ± 9.62 kg) during barefoot walking overground at a self-selected speed. Once the acquisition results were processed with visual 3D software, the kinematics data were exported, and the eight phases of the gait cycle were identified. Results: As compared with the control group, individuals with CAI displayed a significantly smaller plantarflexion in toe off (P = 0.049, Cohen's d = 0.387), a significantly increased inversion in heel strike (P = 0.007, Cohen's d = 0.271) and initial swing (P = 0.035, Cohen's d = 0.233), mid-swing (P = 0.019, Cohen's d = 0.232) and end-swing (P = 0.021, Cohen's d = 0.214), and significantly smaller eversion in mid stance（P = 0.010, Cohen's d = 0.288）and heel off (P = 0.033, Cohen's d = 0.089). Significant between-group differences in ankle kinematics were observed in the sagittal and frontal planes, but not in the horizontal plane, during walking. Conclusion: When walking, patients with CAI have altered sagittal- and frontal-plane kinematics during different stance and swing phases. These kinematic changes require multi-dimensional, dynamic, continuous functional assessment and specialized rehabilitation intervention.

Context: This work presents the development of a dynamic model for human lower limb motion in the sagittal plane during the gait cycle. The primary objective of this model is to serve as a powerful tool for the design of rehabilitation and assistive devices, such as exoskeletons, prostheses, and orthoses. It achieves this by facilitating the estimation of joint torques, the detailed analysis of kinematic variables, optimal actuator selection, and the exploration of advanced control techniques. Method: The dynamic model consists of two primary components: (1) the plant model and (2) a closed-loop controller. The plant model represents the forward dynamics of human gait and is based on a multi-mass pendulum composed of three segments of the lower limb (thigh, lower leg, and foot) and three joints (hip, knee, and ankle). It is analyzed using the Euler-Lagrange formulation and the nonlinear second-order differential equations are implemented in MATLAB’s Simulink. To reproduce reference human gait trajectories and simulate the functioning of the neuromusculoskeletal system and the central nervous system, a closed-loop PID controller is incorporated into the plant model. It is noteworthy that the scope of this dynamic model is specifically confined to the sagittal plane. Results: The dynamic model is evaluated in terms of angular displacement tracking using the relative maximum error (RME) and the root mean square error (RMSE) for reference trajectories of healthy adult male human gait as reported in the literature. The model demonstrates tracking with errors below 2.2 [°] in magnitude and 3,5% for all three considered segments (thigh, lower leg, and foot). Conclusions: The quantitative results show that the dynamic model developed in this work is reliable and allows for a precise reproduction of human gait trajectories.