Search

Silent communication based on biosignals from facial muscle requires accurate detection of its directional movement and thus optimally positioning minimum numbers of sensors for higher accuracy of speech recognition with a minimal person-to-person variation. So far, previous approaches based on electromyogram or pressure sensors are ineffective in detecting the directional movement of facial muscles. Therefore, in this study, high-performance strain sensors are used for separately detecting

A thin-film transistor (TFT) with a color filter function achieved by designing periodic nanohole arrays in the metal electrodes was studied. Since this metal electrode is not opaque but transparen...

Semiconducting polymer thin films are essential elements of soft electronics for both wearable and biomedical applications

A skin-like electronic health care patch is demonstrated with a stretchable organic light-emitting diode display and photodiode., Skin-like health care patches (SHPs) are next-generation health care gadgets that will enable seamless monitoring of biological signals in daily life. Skin-conformable sensors and a stretchable display are critical for the development of standalone SHPs that provide real-time information while alleviating privacy concerns related to wireless data transmission. However, the production of stretchable wearable displays with sufficient pixels to display this information remains challenging. Here, we report a standalone organic SHP that provides real-time heart rate information. The 15-μm-thick SHP comprises a stretchable organic light-emitting diode display and stretchable organic photoplethysmography (PPG) heart rate sensor on all-elastomer substrate and operates stably under 30% strain using a combination of stress relief layers and deformable micro-cracked interconnects that reduce the mechanical stress on the active optoelectronic components. This approach provides a rational strategy for high-resolution stretchable displays, enabling the production of ideal platforms for next-generation wearable health care electronics.

Numerous light-based diagnostic and therapeutic devices are routinely used in the clinic. These devices have a familiar look as items plugged in the wall or placed at patients' bedsides, but recently, many new ideas have been proposed for the realization of implantable or wearable functional devices. Many advances are being fuelled by the development of multifunctional materials for photonic healthcare devices. However, the finite depth of light penetration in the body is still a serious constraint for their clinical applications. In this Review, we discuss the basic concepts and some examples of state-of-the-art implantable and wearable photonic healthcare devices for diagnostic and therapeutic applications. First, we describe emerging multifunctional materials critical to the advent of next-generation implantable and wearable photonic healthcare devices and discuss the path for their clinical translation. Then, we examine implantable photonic healthcare devices in terms of their properties and diagnostic and therapeutic functions. We next describe exemplary cases of noninvasive, wearable photonic healthcare devices across different anatomical applications. Finally, we discuss the future research directions for the field, in particular regarding mobile healthcare and personalized medicine.

As organic photodetectors with less than 1 μm pixel size are in demand, a new way of enhancing the sensitivity of the photodetectors is required to compensate for its degradation due to the reduction in pixel size. Here, we used Ag nanoparticles coated with SiOxNy as a light-absorbing layer to realize the scale-down of the pixel size without the loss of sensitivity. The surface plasmon resonance appeared at the interface between Ag nanoparticles and SiOxNy. The plasmon resonance endowed the organic photodetector with boosted photon absorption and external quantum efficiency. As the Ag nanoparticles with SiOxNy are easily deposited on ITO/SiO2, it can be adapted into various organic color image sensors. The plasmon-supported organic photodetector is a promising solution for realizing color image sensors with high resolution below 1 μm.

In this work, organic photodiodes (OPDs) based on two newly synthesized p-type dipolar small molecules are reported for application to green-light-selective OPDs. In order to reduce the blue-color absorption induced by the use of C60 as the n-type material in a bulk heterojunction (BHJ), the electron donor:electron acceptor composition ratio is tuned in the BHJ. With this light manipulation approach, the blue-wavelength external quantum efficiency (EQE) is minimized to 18% after reducing the C60 concentration in the center part of the BHJ. The two p-type molecules get a cyanine-like character with intense and sharp absorption in the green color by adjusting the strength of their donating and accepting parts and by choosing a selenophene unit as a π-linker. When combined to C60, the green-wavelength EQE reaches 70% in a complete device composed of two transparent electrodes. Finally, the optical simulation shows the good color-balance performance of hybrid full-color image sensor without an additional filter by using the developed green OPD as the top-layer in stacked device architecture.

Utilizing organic electronics compatible with conventional semiconductor fabrication processes is extremely difficult because of their low chemical resistivity and poor environmental durability. To preserve the intrinsic functionality of organic materials, only a few fabrication processes can be used. Moreover, it is essential to achieve process expandability and silicon-process compatibility to develop high-resolution electronics suitable for mass production. Therefore, we developed wet-process-compatible organic photodetectors by replacing the conventional shadow-mask process with photolithography. This suppresses particle deposition during the serial fabrication processes, providing high operational stability. The fabricated green organic photodiodes exhibit a low dark current (1.0 × 10−11 A/cm2) with high photon–electron conversion efficiency (EQE = 65%). The charge collection and charge separation efficiencies are stable (ηcc = 84.6% and ηcs = 97.7%, respectively). Moreover, the organic semiconductors are compatible with conventional wet- and dry-etching processes owing to thin-film encapsulation layers. Finally, the novel organic image sensor can withstand 500 h under 85 °C/85% relative humidity and 1000 thermal cycles (−55–125 °C). Because of its robustness and strong barrier properties, the novel process architecture reported herein can be extended to any organic electronic devices, including widely commercialized organic light-emitting diodes and organic photovoltaic devices.

A novel approach for the thin film encapsulation (TFE) of organic photo-diode (OPD) for the next generation of organic/inorganic hybrid complementary metal oxide semiconductor (CMOS) image sensor is reported. The TFE is composed of two different metal-oxides stacked in bi-layer thin film architecture. The first layer is composed of aluminum oxide (AlOx) deposited by atomic layer deposition (ALD) at a moderate temperature of 100 °C to avoid any damage to the organic active layer. The first layer acts as a water barrier layer and also as a first protective layer for the deposition of a second silicon oxynitride (SiON) layer that could be processed by plasma-enhanced chemical vapor deposition (PECVD) at higher temperatures. The second layer ensures a better mechanical and chemical stability of the whole structure and also serves as a second protective layer from damages induced during the additional processing stages, such as photolithography or microlensing. With the TFE architecture the overall device stability at 85 °C and 85% relative humidity exceeded 1000 h without observable device performance decrease. This was confirmed by fabricating a green-light sensitive OPD characterized by a stable external quantum efficiency of 60–70%.

Charge transfer (CT) states at the donor–acceptor interfaces play an important role in organic optoelectronic devices, yielding photocarrier generation or recombination losses. In this study, we fabricate and characterize vacuum-deposited organic photodiodes (OPDs) composed of SubPc:C60 with various active-layer thicknesses and mixing ratios in terms of the charge separation efficiency (CSE) and charge collection efficiency (CCE). We demonstrate that the combined field-assisted quenching study using both photoluminescence (PL) and electroluminescence (EL) reveals detailed information on the device physics of bulk heterojunction photodiodes as related to the CT state. Our modified PL quenching efficiency approach allows us to reasonably evaluate the CSE. In addition, we find that the EL energy is closely related to the recombination loss factor, and the energy gap between PL and EL exhibits a strong linear relationship with the CCE. As a result, the energy gap is proved to be a meaningful indicator of the ...

Controlling defect states in a buffer layer for organic photo devices is one of the vital factors which have great influence on the device performance. Defect states in silicon oxynitride (SiOxNy) buffer layer for organic photo devices can be controlled by introducing appropriate dopant materials. We performed ab initio simulations to identify the effect on doping SiOxNy with carbon (C), boron (B), and phosphorous (P) atoms. The results unveil that hole defects in the SiOxNy layer diminish with the phosphorous doping. Based on the simulation results, we fabricate the small molecule organic photodetector (OPD) including the phosphorous-doped SiOxNy buffer layer and the active film of blended naphthalene-based donor and C60 acceptor molecules, which shows excellent enhancement in the external quantum efficiency (EQE). The results of our charge-based deep level transient spectroscopy (Q-DLTS) measurements confirmed that the EQE enhancement originates from the decrease of the hole traps induced by the reduced hole defects. The method of controlling the defect states in SiOxNy buffer layers by the doping can be used to improve the performance in various organic photo devices.

We report on two novel p-type small molecules with a donor–acceptor molecular structure for application to green-light-selective organic photodiodes (OPDs). To achieve the requirement of high light selectivity and sensitivity, an electron-donating aryl amino moiety is combined with two respective electron-accepting heterocycles so that the molecules approach cyanine-like character, characterized by intense and sharp absorption. Molecular stacking is controlled by the addition of bulky aryl functional groups to the main backbone to further control the electrical charge transport properties. With this molecular design, a maximum external quantum efficiency close to 61% (λmax = 550 nm) and a dark-current density below 1.6 nA cm−2 (or specific detectivity D* = 1.19 × 1013 cm Hz1/2 W−1) at an applied reverse bias of 3 V are obtained when mixed with fullerene (C60) in an inverted-structure bulk heterojunction OPD composed of two transparent electrodes. The potential construction of a full-color photodetector or an image sensor is demonstrated by combining the green-light-selective OPD with a silicon photodiode containing solely blue and red color filters in a stacked architecture.

As organic photodetectors with less than 1 μm pixel size are in demand, a new way of enhancing the sensitivity of the photodetectors is required to compensate for its degradation due to the reduction in pixel size. Here, we used Ag nanoparticles coated with SiO

We examined double-layered transparent conducting oxide (TCO) anode structures consisted of zinc-doped indium oxide (IZO) over the gallium-doped zinc oxide (GZO), and IZO over the GZO with electrochemical treatment. In bottom type OLEDs, power efficiency and current efficiency were enhanced by a factor of 1.50 and 1.14 at a current density of 10 mA/cm2 in IZO/GZO anode structure, compared to the only IZO anode structure. Due to the reduced sheet resistance of the IZO/GZO TCO surface, the operating voltage of the OLED with IZO/GZO anode structure was lowered, leading to mostly enhance power efficiency. More enhanced in power efficiency and current efficiency by a factor of 1.21 and 1.25 at a current density of 10 mA/cm2 were achieved in IZO/GZO anode structure with electrochemical treatment, compared to the IZO/GZO anode structure due to the change of the surface morphology of the GZO and the existence of the nanoporous layer beneath the GZO surface by an electrochemical treatment. In total, double-layered IZO/GZO anode structure with electrochemical treatment was revealed at an enhancement factor of 1.80 in power efficiency and 1.42 in current efficiency, compared to the only IZO anode structure.

The dynamic characterization of two green-sensitive organic photodetectors (OPDs) using nonfullerene small molecules is investigated by analyzing the electrical parameters based on the experimental results and the simulated data. The two OPDs comprise N,N-dimethyl quinacridone (DMQA) as the common donor and dibutyl-substituted dicyanovinyl terthiophene (DCV3T) or boron-subphthalocyanine chloride (SubPc) as respective acceptors. At the applied voltage of −5 V, the device composed of DMQA/SubPc shows a higher frequency response at 148.3 kHz, by 55 kHz higher than the device based on DMQA/DCV3T. The impedance spectroscopy results indicate that the former device exhibits the low resistance due to the high mobility and the low capacitance linked to the dielectric constant. According to the molecular quantum calculation, the linear structure of DCV3T may promote packing of adjacent molecules in the linear direction, resulting in a high polarizability. In contrast, the fused structure of SubPc leads to a decreas...

Typical CMOS colour image sensors consist of Si-based photodetectors (PDs) attached with colour filter arrays (i.e., the Bayer pattern). Recent trends on the development of high resolution image sensors, however, require downsizing the pixel dimension, which inevitably results in the loss of sensitivity due to the reduction in the photon acquisition. Very recently, hybrid stacks of organic photodetectors (OPDs) on conventional CMOS technologies have been proposed as one of the promising approaches to realise highly sensitive image sensors by doubling the light detecting area in the limited pixel size. Specifically, OPDs with orthogonal photosensitivity to green light and Si-based PDs with red and blue colour filters serve as the top and bottom photo-conversion layers, respectively. In this presentation, we will introduce the recent development of high performance green light sensitive OPDs and the demonstration of colour images from hybrid CMOS image sensors proposed. OPDs consisting of small molecule organic bulk heterto-junction structures, hole/electron buffer layers, and transparent top/bottom ITO electrodes exhibited peak external quantum efficiencies of 60-65% at 550-560 nm wavelengths and full width at half maximum of ~120 nm at reverse bias of 3 V. Extremely low dark current densities in the range of 0.2-0.5 nA/cm2 at reverse bias of 3V and consequently high specific detectivities over 2×10^13 Jones were obtained from the developed OPD system. Further investigations in terms of the molecular structures of organic light absorbing materials, buffer materials, layer sequences, and even integration issues of the OPD on the CMOS will be described in detail.

There are growing opportunities and demands for image sensors that produce higher-resolution images, even in low-light conditions. Increasing the light input areas through 3D architecture within the same pixel size can be an effective solution to address this issue. Organic photodiodes (OPDs) that possess wavelength selectivity can allow for advancements in this regard. Here, we report on novel push–pull D−π–A dyes specially designed for Gaussian-shaped, narrow-band absorption and the high photoelectric conversion. These p-type organic dyes work both as a color filter and as a source of photocurrents with linear and fast light responses, high sensitivity, and excellent stability, when combined with C60 to form bulk heterojunctions (BHJs). The effectiveness of the OPD composed of the active color filter was demonstrated by obtaining a full-color image using a camera that contained an organic/Si hybrid complementary metal-oxide-semiconductor (CMOS) color image sensor.

In this paper, multidirectional light-control reflective (LCR) films are developed in order to create an active reflective structure that will enhance the image brightness and contrast ratio of reflective dye-doped polymer-dispersed liquid crystal (D-PDLC) displays at lower viewing angles. Advantages of LCR films are that their production is low cost and they require a simple photolithographic fabrication method. The optimum design prism-type light-control reflective film succeeded in minimising the surface scattering effect; thus, the contrast ratio is much enhanced. The symmetric and asymmetric LCR films produced multidirectional scattering that enhances the reflectance at lower viewing angles, which has importance in future display applications. In particular, the prism LCR film has been found to be more influential on the reflectance of D-PDLC films due to multidirectional scattering of light by non-symmetric arrays. The improvement in contrast ratio has been confirmed by the enhancement of optical pr...

Dye-doped PDLC has a high probability to be used as reflective optical shutter due to its good reflectance compared to normal PDLC or LC shutter structures. The black state can be significantly enhanced by the minimized surface scattering between polymer and LC surface, which makes a harmful result to the contrast ratio, one of most important factors for optical shutter. To remove this scattering effect, we have developed new combinational structure, consisted of guest dye-doped LC (DLC) and dye-doped PDLC (DPDLC). In the newly fabricated dye-doped PDLC structure, the front location of dye-doped LC layer can remove the light scattering effect of the surface of single dye PDLC structure. The proposed process can also remove the randomly distributed dyes in polymer area of dye PDLC. This technique enhances the reflectance as well as the contrast ratio.

The enhancement of electro-optical properties in reflective-type dye polymer dispersed liquid crystal (PDLC) has been achieved by applying an additional white PDLC layer along with dye PDLC layer. This newly modified structure that consists of white PDLC layer and scattering reflector acts as an active reflector. In this practice, an additional arrangement of a polymer barrier layer is made-up over white PDLC layer, to block the absorption of any solution from dye PDLC. The contrast ratio of this new configuration is almost doubled with low driving voltage and high ON reflectance. Simultaneously, the “off” state has been observed darker than single layer dye PDLC structure. This new configuration can be potentially significant for various display applications such as E-paper, outdoor billboard, and flexible display. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

We report on a single-shot micropatterning of an organic polymer achieved by ablation with demagnifying projection using a plasma-based extreme ultraviolet (XUV) laser at 21 nm. A nickel mesh with a period of 100 μ m was 10×demagnified and imprinted on poly(methyl methacrylate) (PMMA) via direct ablation. This first demonstration of single-shot projection, single-step lithography illustrates the great potential of XUV lasers for the direct patterning of materials with a resolution scalable down to the submicrometer domain. In the second part, we present a novel experimental method for improving the efficiency of surface processing of various solids achieved by simultaneous action of XUV, obtained from high-order harmonic generation, and near-infrared (NIR)–VIS laser pulses. The NIR–VIS pulse interacts with free charge carriers produced by the energetic XUV photons, so that its absorption dramatically increases. Laser-induced periodic surface structures were effectively produced using this technique.

Complementary metal–oxide–semiconductor (CMOS) colour image sensors are representative examples of light-detection devices. To achieve extremely high resolutions, the pixel sizes of the CMOS image sensors must be reduced to less than a micron, which in turn significantly limits the number of photons that can be captured by each pixel using silicon (Si)-based technology (i.e., this reduction in pixel size results in a loss of sensitivity). Here, we demonstrate a novel and efficient method of increasing the sensitivity and resolution of the CMOS image sensors by superposing an organic photodiode (OPD) onto a CMOS circuit with Si photodiodes, which consequently doubles the light-input surface area of each pixel. To realise this concept, we developed organic semiconductor materials with absorption properties selective to green light and successfully fabricated highly efficient green-light-sensitive OPDs without colour filters. We found that such a top light-receiving OPD, which is selective to specific green wavelengths, demonstrates great potential when combined with a newly designed Si-based CMOS circuit containing only blue and red colour filters. To demonstrate the effectiveness of this state-of-the-art hybrid colour image sensor, we acquired a real full-colour image using a camera that contained the organic-on-Si hybrid CMOS colour image sensor.

We have developed a novel method for efficient structuring of the surface of materials by applying femtosecond near infrared laser pulses simultaneously with a weak extreme ultraviolet beam, which leads to a very strong radiation-matter interaction and brings a dramatic increase of the surface processing speed. We present our recent experimental results on surface nanostructuring of thin films of amorphous carbon and polymethyl methacrylate deposited on bulk substrates and discuss the underlying physical mechanisms. In the case of amorphous carbon, large areas of laser-induced periodic surface structures with a spatial period of 550 nm were created, having their origin in laser-induced convective currents. Our method provides a powerful tool for fast modification of tribological properties of the irradiated sample.

The color optical switching device by polymer network liquid crystal (PNLC) with color filter on a specular reflector shows excellent performance; white reflectance of 22%, color gamut of 32%, and contrast ratio up to 50:1 in reflective mode measurement. The view-angle dependence of the reflectance can be adjusted by changing the PNLC thickness. The color chromaticity shown by the device is close to the limit value of color filters, and its value nearly remains with respect to the operating voltage. These optical properties of the device can be explained from the prediction based on multiple interactions between the light and the droplets of liquid crystal. The high reflectance, vivid color image, and moderate responds time allow the PNLC device to drive good color moving image. It can widely extend the applications of the reflective device.

The optical properties and the theoretical prediction of color optical shutter with dye-doped polymer network liquid crystal (PNLC) were investigated. The view-angle dependence of reflectance according to the bias conditions showed distinctive characteristics, which could be explained from the effects of dye absorption and path length. It was also shown that the thickness dependence of reflectance was strongly influenced by the light-scattering coefficient. Our experimental results matched up well with the theoretical prediction based on the light scattering of liquid crystals in polymer network and the absorption of dichroic dye. This work indicates potential to improve the optical device using dye-doped liquid crystal-polymer composite.

We demonstrate a novel experimental method for unusual structural surface modification of various solids (PMMA, amorphous carbon) achieved by simultaneous action of XUV (21.6 nm), obtained from high-order harmonic generation, and Vis-NIR (410/820 nm) laser pulses. Although the fluence of each individual pulse was far below the surface ablation threshold, very efficient and specific material expansion was observed after irradiation by a few shots of mixed XUV/Vis-NIR radiation.

We report on the development of ultrafast coherent soft X-ray beamline at the Prague Asterix Laser System (PALS) Research Center intended for interdisciplinary applications such as ablation and controlled surface modification of solid materials for a micro/nano-patterning, soft X-ray interferometry and holography for surface probing with nanometric resolution, and improvement of focusing optics for soft X-ray beams. The beamline is based on 1 kHz, table-top, highorder harmonic generation (HHG) source capable of delivering fully coherent beam, tunable in the 13 - 40 nm spectral range. The Ti:sapphire (810 nm) laser pulses with a duration of 35 fs and energy 1.1 mJ are focused into a static gas cell containing conversion medium (Ar). To achieve highly efficient HHG at 30 nm we apply the technique of guided laser pulses. Experimental results on HHG source characterization, optimization, and spectral tunability are presented. Achievements on the implementation of so called two-color HHG using gas cell have been reported for the first time. The complete beamline will consist of a tandem of two vacuum chambers: one for the HHG source and its diagnostics, and second intended for the application experiments. The access to this new soft X-ray installation will be opened to external users since 2009.

The polarization of high-harmonics from aligned N(2) molecules was measured by observing the visibility of spatial interference between two high-harmonics generated separately. The minimum visibility was observed at an angle of 60 degrees between the polarization of the harmonic generation laser field and the molecular orientation. In this case, the angular shift of harmonic polarization is 15 degrees from the molecular orientation. Our measurement of the visibility variation matches the theoretical prediction based on the harmonic field calculation for aligned N(2) molecules.

We experimentally observed revival signals of high-order harmonics under field-free molecular alignment by applying chirp-free and chirped laser pulses. The revival signal obtained even with chirp-free laser pulses exhibited linearly dependant spectral phase with respect to frequency, and the slope of the spectral phase changed with the laser chirp condition.

Highly efficient high-harmonic generation was achieved using a two-color laser field that consisted of the fundamental and its second harmonic. The harmonics generated in an orthogonally polarized two-color field were stronger than those obtained in the fundamental field by more than two orders of magnitude. Conversion efficiency as high as 5 × 10−5 was obtained for the 38th harmonic (21.6 nm) from helium driven by the two-color laser field with a proper relative phase. This enhancement is explained by analyzing the electron behavior in the two-color field. In addition, we confirmed the effects of mixed field by controlling the time delay between the two-color laser fields.

Highly efficient high-harmonic generation was achieved in helium using an orthogonally polarized two-color laser field that consisted of the fundamental and second harmonic of a femtosecond Ti:sapphire laser. By applying a higher intensity second harmonic, the harmonics in the two-color field were stronger than those obtained in the fundamental field by more than two orders of magnitude. The conversion efficiency was as high as 5/spl times/10/sup -5/ for the 38/sup th/ harmonic at 21.6 nm.

Highly efficient high-harmonic generation was achieved in helium using a two-color laser field that consisted of the fundamental and the second harmonic fields of a femtosecond Ti:sapphire laser. By applying a high intensity second harmonic, the harmonics generated in the orthogonally polarized two-color field were stronger than those obtained in the fundamental field by more than 2 orders of magnitude, and even stronger than those of the parallel polarization case. A conversion efficiency as high as $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}5}$ was obtained for the 38th harmonic at 21.6 nm. The physical origin of this enhancement was deduced by analyzing the electron behavior in the two-color field.

Submicrometer air gap structure has formed on diffuse reflection structure to improve light reflectance. Covering polymer or liquid on a diffuse reflector to make optical components induces the severe decrease of the total reflectance, since the diffuse reflected angle of some light rays is larger than the critical angle and the rays travel to the medium until meeting a proper small incident angle. The reflectance drops to 68% of the original value with just a polymer coating on the diffuse reflector. The formation of an air tunnel structure between the polymer layer and the diffuse reflector makes a symmetrical reflective index matching state and recovers 95% of the original reflectance. Due to the simple fabrication process and the chemical stability, the structure can be applied to various optical components and reflective display devices.

A color-reflective optical shutter structure has been studied using polymer-stabilized liquid crystal (PSLC) devices with a specular reflector. The combined effect of an LC, a polymer, a color dye, and a specular reflector results in a high performance of a reflective-mode optical shutter as well as of a simple structure with a fast response time capable of smooth moving images. The reflectance is up to 40%, one of highest for reflective devices, whose response times are fast enough to provide video speed response (

Materials processing utilizing ultrashort near-infrared (NIR) laser pulses with duration in the range of tens to hundreds of femtoseconds (1fs = 10 15 s) has attracted a great deal of interest in the scientific and industrial world recently. Unfortunately, a number of materials that often exhibit great technological and scientific importance are transparent in NIR, making it very difficult to process them by laser radiation in this spectral range. Here, we present a new method for the efficient structuring of the surface of materials by applying femtosecond NIR laser pulses simultaneously with a weak extreme ultraviolet (XUV) beam, which leads to very strong radiation-matter interaction, bringing a dramatic increase in the surface processing speed. A laser system providing 5mJ, 820nm, 32fs, 10Hz pulses was used to generate high-order harmonics with the strongest spectral line at 21nm and with a conversion efficiency of 5%. The two beams were focused on the samples by using an off-axis paraboloidal multilayer mirror. As an example, we present the results of the surface nanostructuring of thin films of amorphous carbon and poly(methyl methacrylate) deposited on bulk substrates. We discuss the physical mechanisms that lead to the laser-induced periodic surface structures when our method is used.

Characteristics of high harmonics generated from aligned N2 molecules were investigated by rotating the molecules with respect to the polarization of harmonic generation pulses. The high harmonics in the plateau and the cutoff regions showed distinctive behaviour, which could be explained from the calculation of transition dipole moments between recolliding electron and multi-orbitals of N2 molecule consisting of the highest occupied molecular orbital (HOMO) and the lower-lying orbital below HOMO (HOMO-1). It was also observed that the angular dependence of harmonics from aligned molecules with respect to the polarization of harmonic generation pulses was closely related to the geometrical structure of molecular orbitals, and that the harmonic in the transition region from the plateau to the cutoff was influenced comparably by both HOMO and HOMO-1. These results confirmed that high harmonic generation and molecular structure were closely linked.

Various type color PDLC structures have been characterized on a glass and a plastic substrate for reflective mode color display. The standard PDLC and the black diachronic dye mixed PDLC structure with color filter (RGB) show a good black state with high color purity and 256 gray levels, even though both structures have a dark color images. Color dichroic dye (RGB/CMY) mixed PDLC cells promise a good white reflectance. The problem of using color dye system is the enhancement of a poor black state. Using new CMY color based filter with black dye PDLC shutter structure can improve a white state with a proper color vision.

We present the experimental evidence of structural surface modifications of poly(methyl methacrylate) (PMMA) caused by simultaneous action of extreme ultraviolet (XUV) (∼21 nm) and visible-near infrared (visible-NIR) (820/410 nm) ultrashort pulses. Although the fluence of each individual beam was far below the surface modification threshold, very efficient and specific material expansion was observed after irradiation of PMMA by more than ∼20 shots of mixed XUV/visible-NIR radiation. As the XUV photons generate free charge carriers, absorption of the optical radiation dramatically increases, which heats up the material and further enhances the XUV induced damage to the polymer chain.

We have achieved very efficient high-harmonic generation in a two-color laser field using a long gas jet of He. With the optimization of laser parameters and target conditions, strong harmonics were produced at 2(2n+1)th orders in an orthogonally polarized two-color field. The strongest harmonic at the 38th order (21.6nm) reached an energy of 0.6μJ with a 6mm gas jet, giving a conversion efficiency as high as 2×10−4.