Search

In the present paper, porous materials were prepared from the hydrothermal treatment of aqueous solutions of tannin, a renewable phenolic resource extracted from tree barks, containing dissolved salts of transition metals: V, Cr, Ni and Fe. Hydrothermal treatment produced carbonaceous particles doped with the aforementioned metals, and such materials were treated according to two different routes: (i) calcination in air in order to burn the carbon and to recover porous oxides; (ii) pyrolysis in inert atmosphere so as to recover porous metal/carbon hybrid materials. The nature of the metal salt was found to have a dramatic impact on the structure of the materials recovered by the first route, leading either to nano-powders (V, Cr) or to hollow microspheres (Ni, Fe). The second route was only investigated with iron, leading to magnetic Fe-loaded micro/mesoporous carbons whose texture, pore volumes and surface areas gradually changed with the iron content.

Background Pacemaker (PM) interrogation requires correct manufacturer identification. However, an unidentified PM is a frequent occurrence, requiring time-consuming steps to identify the device. Objective The purpose of this study was to develop and validate a novel algorithm for PM manufacturer identification, using the ECG response to magnet application. Methods Data on the magnet responses of all recent PM models (↜15 years) from the 5 major manufacturers were collected. An algorithm based on the ECG response to magnet application to identify the PM manufacturer was subsequently developed. Patients undergoing ECG during magnet application in various clinical situations were prospectively recruited in 7 centers. The algorithm was applied in the analysis of every ECG by a cardiologist blinded to PM information. A second blinded cardiologist analyzed a sample of randomly selected ECGs in order to assess the reproducibility of the results. Results A total of 250 ECGs were analyzed during magnet application. The algorithm led to the correct single manufacturer choice in 242 ECGs (96.8%), whereas 7 (2.8%) could only be narrowed to either 1 of 2 manufacturer possibilities. Only 2 (0.4%) incorrect manufacturer identifications occurred. The algorithm identified Medtronic and Sorin Group PMs with 100% sensitivity and specificity, Biotronik PMs with 100% sensitivity and 99.5% specificity, and St. Jude and Boston Scientific PMs with 92% sensitivity and 100% specificity. The results were reproducible between the 2 blinded cardiologists with 92% concordant findings. Conclusion Unknown PM manufacturers can be accurately identified by analyzing the ECG magnet response using this newly developed algorithm. [ABSTRACT FROM AUTHOR]

Objective: The aims of this study were: (1) to define and classify those connective structures of the female pelvis that are of potential clinical interest, (2) to evaluate the adequacy of the Terminologia Anatomica (official nomenclature) and (3) to establish a correspondence between the official nomenclature and the most commonly used terms. Study design: The results of 30 macroscopic and laparoscopic dissections of fresh cadavers with and without vessel injection of colored latex solutions were compared with the descriptions and definitions in the Terminologia Anatomica and the most frequently cited English and non-English literature from 1890 to 2003. Results: We identified 3 groups of fasciae, parietal pelvic fascia, visceral pelvic fascia, and extraserosal pelvic fascia, which could be divided into diverse clinically relevant anatomical structures characterized by different locations, spatial orientation, and consistency. These structures differed considerably with regard to number and nomenclature from those described in the Terminologia Anatomica and part of the literature. Conclusion: Our results suggest that the official terminology applied to the connective structures of the female pelvis could be profitably revised and expanded. We offer a complete description of these structures and suggest a classification that may he useful for teaching and clinical purposes. [ABSTRACT FROM AUTHOR]

The present study deals with the preparation of carbonaceous materials from flavonoid tannin by a two-step process: hydrothermal carbonisation (HTC) at 180 °C in aqueous solution, followed by pyrolysis at 900 °C. Whereas such process and the resultant materials have been described elsewhere ( Braghiroli et al., 2014 ), two modifications of the HTC step were introduced and investigated for the first time: 1) pH reduction, by para-toluenesulphonic acid addition, as catalyst of tannin rearrangement reactions; 2) silver nitrate addition as nucleating agent by silver metal nanoparticles formation. Carbon from tannin simply pyrolysed at 900 °C (i.e., without HTC step) was also prepared and used as a reference material. The impacts of these modifications on yield, composition, porosity and nanotexture of the resultant carbon materials were investigated in detail. The carbons produced at low pH were monolitic and had te highest surface areas, up to 800 m 2 g −1 , with the same microporous size distribution as the material prepared at non-modified pH. The presence of silver produced a decrease and a homogenisation of the microsphere particle size with an increase of the yield. Adding H + and Ag + both produced more crystalline carbons, although HTC itself at non-modified pH produced less crystalline carbon compared to the reference material. [ABSTRACT FROM AUTHOR]

Hyper-crosslinked polymers (HCPs) have been produced by the Friedel-Crafts reaction using anthracene, benzene, carbazole or dibenzothiophene as precursors and dimethoxymethane as crosslinker, and the effect of graphene oxide (GO) addition has been studied. The resulting HCPs were highly microporous with BET areas (A BET ) between 590 and 1120 m 2 g -1 . The benzene-derived HCP (B1FeM2) and the corresponding composite with GO (B1FM2-GO) exhibited the highest A BET and were selected to study their hydrogen adsorption capacities in the pressure range of 0.1 - 14 MPa at 77 K. The maximum H 2 excess uptake was 2.1 and 2.0 wt% for B1FeM2 and B1FeM2-GO, respectively, at 4 MPa and 77 K. The addition of GO reduced the specific surface area but increased the density of the resultant HCP-GO composites, which is beneficial for practical applications and proves that materials giving higher gravimetric storage capacities are not necessarily those that offer higher volumetric capacities. H 2 adsorption-desorption cycles up to 14 MPa showed irreversible deformation of both HCP and HCP-GO materials, which calls into question their application for hydrogen adsorption at pressures above 4 MPa., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: Pelvic organ prolapse is a common condition among post-menopausal women, and surgery is often the standard treatment proposed. Native tissue vaginal surgery is burdened by a high rate of recurrence, and mesh vaginal surgery has become current practice. The purpose of this study was to evaluate the safety and the effectiveness of the vaginal kit Anterior/Apical single incision mesh Elevate™ for the correction of anterior and apical compartment prolapse., Study Design: Data of patients with symptomatic anterior vaginal prolapse stage ≥ II, receiving mesh repair with the Anterior/Apical Elevate single incision system between January 2010 and January 2015 were retrieved. Prolapse was classified according to the POP-Q system. The main outcome measure was anatomical success, while subjective and safety outcomes were secondary outcomes., Results: Anatomical success rate was 87.2 % for anterior compartment prolapse and 84.6 % for combined anterior and apical prolapse, while overall functional success rate was 96.2 % after a median follow-up of 33.6 months. The most frequent short-term complications were urinary bladder injury (3.0 %) and transient urinary retention (6.9 %). The most common long-term complications were de novo or persistent symptomatic stress urinary incontinence (10.8 %) and vaginal mesh extrusion (3.8 %)., Conclusion: Mesh vaginal surgery with Anterior/Apical single incision mesh Elevate™ is a well-tolerated procedure with a very high anatomical and functional success rate. Short and long-term complications rate seem to be acceptable, and in most of cases, solvable. Further studies are needed to confirm our promising data., Competing Interests: Declaration of Competing Interest The authors report no declarations of interest., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The growing trend towards sustainable energy production, while intermittent, can meet all the criteria of energy demand through the use and development of high-performance thermal energy storage (TES). In this context, high-temperature hybrid TES systems, based upon the combination of fibrous carbon hosts and peritectic phase change materials (PCMs), are seen as promising solutions. One of the main conditions for the operational viability of hybrid TES is the chemical inertness between the components of the system. Thus, the chemical stability and compatibility of several commercial carbon felts (CFs) and molten lithium salts are discussed in the present study. Commercial CFs were characterised by elemental analysis, X-ray diffraction (XRD) and Raman spectroscopy before being tested in molten lithium salts: LiOH, LiBr, and the LiOH/LiBr peritectic mixture defined as our PCM of interest. The chemical stability was evaluated by gravimetry, gas adsorption and scanning electron microscopy (SEM). Among the studied CFs, the materials with the highest carbon purity and the most graphitic structure showed improved stability in contact with molten lithium salts, even under the most severe test conditions (750 °C). The application of the Arrhenius law allowed calculating the activation energy (in the range of 116 to 165 kJ mol -1 ), and estimating the potential stability of CFs at actual application temperatures. These results confirmed the applicability of CFs as porous hosts for stabilising peritectic PCMs based on molten lithium salts.

Introduction: The present study aim to compare the anatomic landmarks of two pelvic floor repair systems, in order to identify the potential neurovascular lesions related to different mesh fixation techniques., Methods: Abdominal and perineal dissections of 10 fresh cadavers after prolapse surgery using transobturator/transgluteal versus single incision techniques. Neuro-vascular structures of obturator region and perineum were isolated. Distances between needles and anatomical structures were measured., Results: During transobturator anterior repair, the superficial cannula passed 2.5 ± 0.6 cm medially to the obturator canal. The distance of superficial arm to the anterior obturator vessels was 2.2 ± 0.4 cm. The distance of deep cannula to the posterior obturator vessels branches was 1.3 ± 0.5 cm. In two of these cases we observed a lesion of posterior obturator vessels. During single incision repair the distance between the obturator canal and the superficial arms was 2.3 ± 0.7. The mean distances of superficial arms to the anterior and posterior obturator vessels were, respectively, 2.3 ± 0.5 cm and 3.2 ± 0.7 cm. During transgluteal posterior repair the distance between the cannula guide and the ischial spine was 1.7 ± 0.5 cm while it measured 2.3 ± 0.4 cm when single incision posterior device was placed., Conclusions: Anterior transobturator system presents an increased risk of posterior obturator vessels branches injury. During posterior transgluteal repair the distance of the ischio-anal fossa to sacrospinous ligament represents a way that could rule against the correct needle positioning with increased risk of pudendal lesions. Single incision approach offers an easier access to the sacrospinous ligament with lower risk of pudendal lesions., (© 2017 Wiley Periodicals, Inc.)

The main purpose of this study was to understand the effect of time and temperature during the hydrothermal carbonisation (HTC) of olive stones (OS). For that purpose, the severity factor was introduced, by which the effect of the HTC conditions on the resultant products could be described. HTC was carried out at various temperatures (160, 180, 200, 220 and 240 °C) and times (3, 6, 12, 24 and 48 h) for producing 25 hydrochars. The yield to hydrochar varied from 70 to 50%. Hydrochars were all submitted to thermogravimetric and elemental analysis. The liquid fractions were also recovered and analysed in order to valorise OS as completely as possible. Thus, highly added-value products such as furfural and 5-hydroxymethylfurfural were detected. At the highest temperature and time, the hydrochar elemental composition was similar to that of lignite coals. Hydrochars were further carbonised at 900 °C, leading to materials with surface areas as high as 1200 m 2  g -1 and with narrow pore size distributions centred on 0.5 nm. The severity factor allowed finding clear tendencies in the production of hydrochars and derived carbons in terms of yield, composition, and surface area, which would have been hardly analysed if the effects of temperature and time had to be considered separately. We proved that the severity factor, which use is quite uncommon in studies dealing with materials production, is a valuable tool for studying the effects of HTC experimental conditions.

Aims: Laparoscopic sacral colpopexy (LSC) for pelvic prolapse is a complex procedure, characterized by an anterior mesh suspension to the sacral promontory and a posterior tension-free mesh fixation., Methods: Totals of 150 age-BMI and parity matched consecutive POP patients were selected from our Diaconesses Hospital database among women who underwent a laparoscopic supracervical hysterectomy (LSH) plus sacral colpopexy (LSC) from June 2005 to March 2010. We analyzed two group of LSC populations, according to different tension-free apical fixation of the posterior mesh: Promontory (P) group and Utero-Sacral (US) group. Studied endpoints were the anatomical and functional results linked to these different tension-free posterior mesh placements., Results: Baseline characteristics were similar between the groups. No differences in terms of anatomical and functional outcomes were observed between the groups. Pelvic organ mobility at rest versus under Valsalva highlighted a significant reduction of median differential vaginal apex only in the P population (preoperative: 30 mm and 32 mm; postoperative: 8 mm and 24 mm; for P and US, respectively; P < 0.01). No differences were found in terms of intra- or post-operative complications., Conclusions: Uterosacral tension-free fixation of posterior mesh during LSC could be considered a simple procedure and guarantees a more physiological movement of the pelvic organs if compared with promontory suspension., (© 2016 Wiley Periodicals, Inc.)