Search

Abstract We performed a longitudinal shotgun metagenomic investigation of the plaque microbiome associated with peri-implant diseases in a cohort of 91 subjects with 320 quality-controlled metagenomes. Through recently improved taxonomic profiling methods, we identified the most discriminative species between healthy and diseased subjects at baseline, evaluated their change over time, and provided evidence that clinical treatment had a positive effect on plaque microbiome composition in patients affected by mucositis and peri-implantitis.

Boredom coping strategies were incorporated with control-value theory variables of control, value, boredom and academic performance to test an integrated model of the antecedents and effects of boredom experienced while studying among university students. A diverse sample of 177 Australian university students with a mean age of 29.64 years (SD = 10.03 years) completed an online survey for the study. Independently, students' lower appraisals of value and control for their course of study were associated with higher experiences of boredom. Additionally, a conditional process analysis revealed dually moderated mediation where the interaction of control and value appraisals negatively predicted experience of boredom while studying, and the combination of higher boredom and a high tendency for behavioural avoidance coping was subsequently linked to lower academic performance. Practical implications for students and universities are discussed, as well as suggestions about future research to further extend our understanding in these important areas of research.

Objectives: The aim of this systematic review was to analyze the effect of keratinized mucosa (KM) on different peri-implant health-related parameters and on patient-reported outcome measures (PROMs). Material and methods: Randomized controlled trials, cohort, cross-sectional and case–control human studies with a follow-up period of at least 6 months comparing two groups of patients with presence or absence of KM, or with KM < 2 mm or ≥2 mm were included. Primary outcomes were implant failures, PROMs and BoP (BoP/mBI). Additional outcomes were PPD, plaque accumulation (mPI/PI), gingival inflammation (GI/mGI), marginal bone loss (MBL), soft tissue recession (REC) and biological complications. Results: Fifteen studies were included (one RCT, two cohort prospective and twelve cross-sectional). Meta-analysis was performed for cross-sectional studies. Implant failure and complications were not presented as outcome measures, and five studies analyzed PROMs. Results from the meta-analysis reported no evidence of any statistical significant difference between groups in PPD, BoP and MBL, while a statistical significant difference in GI/BI, PI and REC was present in favor of the group with KW ≥ 2 mm. More biological complications were present in the group with no KM/KM < 2 mm but few cases were present to draw any conclusions. Although a meta-analysis could not be performed, a consistent trend toward the worst pain/discomfort in KM < 2 mm was observed. Conclusions: No clear evidence was found supporting the role of KM in peri-implant health and PROMs, even if more plaque and marginal inflammation were present in the KM < 2 mm group. Clinical relevance: KM could have a role in patients with erratic maintenance and patient comfort.

Abstract Background Peri-implant mucositis and peri-implantitis are biofilm-related diseases causing major concern in oral implantology, requiring complex anti-infective procedures or implant removal. Microbial biosurfactants emerged as new anti-biofilm agents for coating implantable devices preserving biocompatibility. This study aimed to assess the efficacy of rhamnolipid biosurfactant R89 (R89BS) to reduce Staphylococcus aureus and Staphylococcus epidermidis biofilm formation on titanium. Methods R89BS was physically adsorbed on titanium discs (TDs). Cytotoxicity of coated TDs was evaluated on normal lung fibroblasts (MRC5) using a lactate dehydrogenase assay. The ability of coated TDs to inhibit biofilm formation was evaluated by quantifying biofilm biomass and cell metabolic activity, at different time-points, with respect to uncoated controls. A qualitative analysis of sessile bacteria was also performed by scanning electron microscopy. Results R89BS-coated discs showed no cytotoxic effects. TDs coated with 4 mg/mL R89BS inhibited the biofilm biomass of S. aureus by 99%, 47% and 7% and of S. epidermidis by 54%, 29%, and 10% at 24, 48 and 72 h respectively. A significant reduction of the biofilm metabolic activity was also documented. The same coating applied on three commercial implant surfaces resulted in a biomass inhibition higher than 90% for S. aureus, and up to 78% for S. epidermidis at 24 h. Conclusions R89BS-coating was effective in reducing Staphylococcus biofilm formation at the titanium implant surface. The anti-biofilm action can be obtained on several different commercially available implant surfaces, independently of their surface morphology.

This study assesses the accuracy and technical predictability of a computer-guided procedure for harvesting bone from the external oblique ridge using a patient-specific cutting guide. Twenty-two patients needing bone augmentation for implant placement were subjected to mandibular osteotomy employing a case-specific stereolithographic surgical guide generated through computer aided design. Differences between planned and real cut planes were measured comparing pre- and post-operative Cone Beam Computed Tomography images of the donor site according to six validated angular and displacement indexes. Accuracy and technical predictability were assessed for 119 osteotomy planes over the study population. Three different guide fitting approaches were compared. An average root-mean-square discrepancy of 0.52 (0.30–0.97) mm was detected. The accuracy of apical and medial planes was higher than the mesial and distal planes due to occasional antero-posterior guide shift. Fitting the guide with an extra reference point on the closest tooth performed better than using only the bone surface, with two indexes significantly lower and less disperse. The study showed that the surgical plan was actualized with a 1 mm safety margin, allowing effective nerve preservation and reducing technical variability. When possible, surgical guide design should allow fitting on the closest tooth based on both radiological and/or intra-oral scan data.

The aim of this multicentre prospective study was to evaluate the efficacy and safety of a surgical approach based on a novel osteotome technique, in order to obtain both alveolar ridge expansion and sinus floor elevation. Partially edentulous patients requiring an implant-prosthetic rehabilitation with a fixed prosthesis in the posterior maxilla were included in this study according to pre-established inclusion and exclusion criteria. All implants were placed after site preparation with the ‘Alternating Osteotome Technique’, which consists of the use of alternating concave and convex osteotomes. After a 4 to 6-month healing period, all implants were restored with a definitive fixed prosthesis. Clinical and radiographic examinations were scheduled over a 36-month follow-up of functional loading according to a well-established protocol. Statistical analysis was used to detect any significant differences or correlations (P = 0.05). Seventy-six patients were consecutively treated with a total of 120 implants in three different centres. The mean ridge expansion and sinus floor elevation were 1.8 ± 0.3 and 2.5 ± 0.7, respectively. After three years of functioning, the implant success rate was 99.1% since one implant had failed and the mean marginal bone loss was 0.6 ± 0.3 mm. No complications occurred during the intraoperative and postoperative periods. All parameters analysed were stable and steady throughout the three-year follow-up. The ‘Alternating Osteotome Technique’ enables the dental surgeon to achieve an adequate implant osteotomy with limited ridge expansion and sinus floor elevation, increasing modestly the vertical and horizontal dimensions of the alveolar crest but reducing significantly the risk of surgical complications.

Bone regeneration involves several biological processes that consistently impact the quality of tissue healing. An important step consists of the local recruitment and differentiation of mesenchymal stem cells that migrate in the site to regenerate from bone marrow. Mesenchymal stem cells (MSCs) may be pushed towards osteogenic commitment by specific substances, often naturally present in plants. Yunnan Baiyao (YB) is a Chinese herbal medicine, mainly working through the synergic effect of terpenoid and steroidal saponins. YB is well known for its numerous biomedical effects, including the ability to favor improved bone tissue healing. In our in vitro study, we used adipose mesenchymal stem cells (ADSCs) as a study-model: We selected samples to harvest and isolate ADSCs and investigate their viability; moreover, we performed bone-related gene expression to evaluate the differentiation of MSCs. To confirm this behavior, we analyzed alkaline phosphate activity and calcium deposition, with ADSCs cultured in basal and osteogenic media, with YB at different concentrations in the medium, and at different time-points: 7, 14 and 21 days. Our results indicate that the synergic effect of terpenoid and steroidal saponins slightly favor the late ADSCs differentiation towards the osteoblasts phenotype. In osteogenic committed cells, the treatment with the lower dose of YB promoted the up-regulation of the alkaline phosphatase gene (ALPL) at day seven and 14 (p < 0.01); at day 21, the alkaline phosphatase (ALP) activity showed a slight increase, although in basal condition it maintains low rates. We assume that such molecular synergy can promote the osteogenic commitment of adipose mesenchymal stem cells, thus improving the timing and the quality of bone healing.

Endodontic overfilling involving the mandibular canal may cause an injury of the inferior alveolar nerve (IAN). We report a case of disabling dysesthesia and paresthesia of a 70-year-old man after endodontic treatment of his mandibular left third molar that caused leakage of root canal filling material into the mandibular canal. After radiographic evaluation, extraction of the third molar and distal osteotomy, a surgical exploration was performed and followed by removal of the material and decompression of the IAN. The patient reported an improvement in sensation and immediate disappearance of dysesthesia already from the first postoperative day.

Objectives. The aim of this case series study was to evaluate, clinically and histologically, the performances of a novel composite xenohybrid bone substitute. Methods. Ten non-restorable teeth were extracted and socket preservation was performed with a bovine heterologous graft enriched with collagen and resorbable biopolymers (SmartBone®). The socket was covered with a collagen membrane firmly sutured. After five months of healing, implant site was prepared by means of a trephine bur and a dental implant was inserted. Specimens were sent for histological analysis. After three months of healing, patients received a provisional restoration followed by a definitive crown. Results. All socket preservations healed uneventfully and, after five months, it was possible to insert implants with no additional bone augmentation procedures. All placed implants osseointegrated successfully and were in function after a minimum follow-up period of 30 months. Conclusions. The tested biomaterial confirmed good clinical performance and, even if left exposed to the oral cavity covered with a collagen membrane, did not show signs of infection. Further research is desirable with a larger sample and variations of socket preservation technique to better understand the potential of this novel bone substitute. [ABSTRACT FROM AUTHOR]

Orthodontic extrusion is a non-surgical technique used to vertically augment bone ridges by extruding impaired teeth and then replacing them with dental implants. Both the volume of bone and the height of the gingiva are increased by means of this intervention, affording considerable benefits when aesthetic zones are being treated. Orthodontic extrusion can be combined with bone regeneration methods, and this is particularly useful in cases of vertical and horizontal bone loss. Guided bone regeneration (GBR) involves the use of a barrier membrane to keep a space free for a blood clot to form, while keeping epithelial cells and connective tissue fibroblasts at bay, thus promoting the generation of new bone tissue. The present case report describes a challenging aesthetic rehabilitation performed in a 50-year-old woman suffering from severe external resorption of the left superior second incisor. A multidisciplinary approach was adopted, achieving good functional and aesthetic results. [ABSTRACT FROM AUTHOR]

Aim: To identify predictors of treatment outcomes following surgical therapy of peri-implantitis., Materials and Methods: We performed a secondary analysis of data from a randomized controlled trial (RCT) comparing access flap with or without bone replacement graft. Outcomes at 12 months were probing pocket depth (PPD), bleeding on probing (BOP), soft-tissue recession (REC) and marginal bone level (MBL) change. Multilevel regression analyses were used to identify predictors. We also built an explanatory model for residual signs of inflammation., Results: Baseline PPD was the most relevant predictor, showing positive associations with final PPD, REC and MBL gain, and negative association with probability of pocket closure. Smokers presented higher residual PPD. Absence of keratinized mucosa at baseline increased the probability of BOP but was otherwise not indicative of outcomes. Plaque at 6 weeks was detrimental in terms of residual PPD and BOP. Treatment allocation had an effect on REC. Final BOP was explained by residual PPD ≥6 mm and plaque at more than two sites., Conclusions: Baseline PPD was the most relevant predictor of the outcomes of surgical therapy of peri-implantitis. Pocket closure should be a primary goal of treatment. Bone replacement grafts may be indicated in aesthetically demanding cases to reduce soft-tissue recession. The importance of smoking cessation and patient-performed plaque control is also underlined., (© 2023 The Authors. Journal of Clinical Periodontology published by John Wiley & Sons Ltd.)

Biofilm-related peri-implant diseases represent the major complication for osteointegrated dental implants, requiring complex treatments or implant removal. Microbial biosurfactants emerged as new antibiofilm coating agents for implantable devices thanks to their high biocompatibility. This study aimed to assess the efficacy of the rhamnolipid 89 biosurfactant (R89BS) in limiting Streptococcus oralis biofilm formation and dislodging sessile cells from medical grade titanium, but preserving adhesion and proliferation of human osteoblasts. The inhibitory activity of a R89BS coating on S. oralis biofilm formation was assayed by quantifying biofilm biomass and microbial cells on titanium discs incubated up to 72 h. R89BS dispersal activity was addressed by measuring residual biomass of pre-formed biofilms after rhamnolipid treatment up to 24 h. Adhesion and proliferation of human primary osteoblasts on R89BS-coated titanium were evaluated by cell count and adenosine-triphosphate quantification, while cell differentiation was studied by measuring alkaline phosphatase activity and observing mineral deposition. Results showed that R89BS coating inhibited S. oralis biofilm formation by 80% at 72 h and dislodged 63-86% of pre-formed biofilms in 24 h according to concentration. No change in the adhesion of human osteoblasts was observed, whereas proliferation was reduced accompanied by an increase in cell differentiation. R89BS effectively counteracts S. oralis biofilm formation on titanium and preserves overall osteoblasts behavior representing a promising preventive strategy against biofilm-related peri-implant diseases.

Background: The present study aimed to evaluate hard and soft tissue parameters around implants placed in augmented posterior mandible, comparing Ti-reinforced d-PTFE membranes with Ti-meshes covered with collagen membranes, after 3 years of follow-up., Materials and Methods: Forty eligible patients were randomly assigned to group A (Ti-reinforced d-PTFE membrane) or group B (mesh covered with collagen membrane) for vertical ridge augmentation (VRA) and simultaneous implants. Implants were evaluated using specific peri-implant parameters for bone and soft tissues: probing pocket depth (PPD), modified plaque index (mPI), bleeding on probing (BoP), modified gingival index (mGI), thickness of keratinized tissue (tKT), width of keratinized tissue (wKT), fornix depth (FD), peri-implant bone level (PBL), interproximal bone peaks (IBP), marginal bone loss (MBL), interproximal bone loss (IBL)., Results: A total of 28 patients with 79 implants were evaluated after 3 years of follow-up. The mean value of MBL was 0.70 mm (group A = 0.73 mm; group B = 0.71 mm), while mean IBL was 0.54 mm (group A = 0.64 mm; group B = 0.40 mm). The treatment with meshes resulted not inferior to PTFE and their clinical results appeared similar. A strong correlation between PBL and IBP was confirmed. Both study groups showed an increase of tKT and wKT values., Conclusion: In the posterior mandible, VRA using both techniques provides stable PBLs up to 3 years. A correct soft tissue management and a strict professional oral hygiene protocol play a crucial role on peri-implant health over time., (© 2023 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

This study assesses the accuracy and technical predictability of a computer-guided procedure for harvesting bone from the external oblique ridge using a patient-specific cutting guide. Twenty-two patients needing bone augmentation for implant placement were subjected to mandibular osteotomy employing a case-specific stereolithographic surgical guide generated through computer aided design. Differences between planned and real cut planes were measured comparing pre- and post-operative Cone Beam Computed Tomography images of the donor site according to six validated angular and displacement indexes. Accuracy and technical predictability were assessed for 119 osteotomy planes over the study population. Three different guide fitting approaches were compared. An average root-mean-square discrepancy of 0.52 (0.30-0.97) mm was detected. The accuracy of apical and medial planes was higher than the mesial and distal planes due to occasional antero-posterior guide shift. Fitting the guide with an extra reference point on the closest tooth performed better than using only the bone surface, with two indexes significantly lower and less disperse. The study showed that the surgical plan was actualized with a 1 mm safety margin, allowing effective nerve preservation and reducing technical variability. When possible, surgical guide design should allow fitting on the closest tooth based on both radiological and/or intra-oral scan data.

Objective: To evaluate the potential benefit of the use of a bone substitute material in the reconstructive surgical therapy of peri-implantitis., Methods: In this multicenter randomized clinical trial, 138 patients (147 implants) with peri-implantitis were treated surgically, randomized by coin toss to either a control (access flap surgery) or a test group (reconstructive surgery using bone substitute material). Clinical assessments, including probing pocket depth (PPD), bleeding and suppuration on probing (BOP & SOP) as well as soft tissue recession (REC), were recorded at baseline, 6 and 12 months. Marginal bone levels (MBL), measured on intra-oral radiographs, and patient-reported outcomes (PROs) were recorded at baseline and 12 months. No blinding to group allocation was performed. The primary outcome at 12 months was a composite measure including (i) implant not lost, (ii) absence of BOP/SOP at all aspects, (iii) PPD ≤5 mm at all aspects and (iv) ≤1 mm recession of mucosal margin on the buccal aspect of the implant. Secondary outcomes included (i) changes of MBL, (ii) changes of PPD, BOP%, and buccal KM, (iii) buccal REC and (iv) patient-reported outcomes., Results: During follow-up, four implants (one in the test group, three in the control group) in four patients were removed due to disease progression. At 12 months, a total of 69 implants in the test and 68 implants in the control group were examined. Thus, 16.4% and 13.5% of implants in the test and control group, respectively, met all predefined criteria of the composite outcome. PPD reduction and MBL gain were 3.7 mm and about 1.0 mm in both groups. Reduction in mean BOP% varied between 45% (test) and 50% (control), without significant differences between groups. Buccal REC was less pronounced in the test group (M = 0.7, SD = 0.9 mm) when compared to controls (M = 1.1, SD = 1.5 mm). PROs were favorable in both groups without significant differences. One case of allergic reaction to the antibiotic therapy was recorded. No other adverse events were noted., Conclusions: Surgical therapy of peri-implantitis effectively improved the clinical and radiographic status at 12 months. While the use of a bone substitute material did not improve reductions of PPD and BOP, buccal REC was less pronounced in the test group. Patient satisfaction was high in both groups., (© 2022 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Objectives: The aim of this case series was to evaluate, clinically and histologically, customized-3D zirconia barriers manufactured for guided bone regeneration (GBR) procedures., Methods: Seven healthy consecutive patients with severe bone atrophy (two of them with a bilateral atrophy) were selected for a GBR procedure with a zirconia barrier. In a 3D software (DentalCad, Exocad GmbH, Germany), a virtual bone graft was designed and a shell was designed covering the graft; a standard tessellation language (.STL) file was obtained and milled (M1, Zirkonzahn, Italy) using a 1200 MPa zirconia (Prettau, Zirkonzahn, Italy). Nine GBR surgeries (8 upper-posterior jaw, 1 lower-posterior jaw) were performed using autogenous bone chips mixed with xenograft (SmartBone, IBI-SA, Switzerland / BioOss, Geistlich, Switzerland) covered with a zirconia barrier, fixed by means of screws. After healing, implant sites were prepared with a trephine bur, collecting a bone biopsy, and dental implants were inserted (Neodent, Straumann Group, Switzerland). Specimens were histologically analyzed., Results: Eight successful surgeries were recorded; one zirconia barrier got exposed after one month of healing but no signs of infection were present till the barrier was removed. In all cases it was possible to insert implants with no additional bone augmentation procedures. Histological evaluations showed the presence of intense deposition of new bone., Conclusions: Within the limitations of the present case series, the tested customized-3D zirconia barriers confirmed good clinical and histological performances, and, even in case of premature exposure, did not show signs of infection. Preliminary results suggest they are effective for GBR procedures. Further research is necessary with a larger sample size., Clinical Significance: The presented barriers could be a viable alternative to titanium-reinforced polytetrafluoroethylene membranes and customized meshes., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

This study aimed to grow a fungal-bacterial mixed biofilm on medical-grade titanium and assess the ability of the biosurfactant R89 (R89BS) coating to inhibit biofilm formation. Coated titanium discs (TDs) were obtained by physical absorption of R89BS. Candida albicans - Staphylococcus aureus biofilm on TDs was grown in Yeast Nitrogen Base, supplemented with dextrose and fetal bovine serum, renewing growth medium every 24 h and incubating at 37 °C under agitation. The anti-biofilm activity was evaluated by quantifying total biomass, microbial metabolic activity and microbial viability at 24, 48, and 72 h on coated and uncoated TDs. Scanning electron microscopy was used to evaluate biofilm architecture. R89BS cytotoxicity on human primary osteoblasts was assayed on solutions at concentrations from 0 to 200 μg/mL and using eluates from coated TDs. Mixed biofilm was significantly inhibited by R89BS coating, with similar effects on biofilm biomass, cell metabolic activity and cell viability. A biofilm inhibition >90% was observed at 24 h. A lower but significant inhibition was still present at 48 h of incubation. Viability tests on primary osteoblasts showed no cytotoxicity of coated TDs. R89BS coating was effective in reducing C. albicans-S. aureus mixed biofilm on titanium surfaces and is a promising strategy to prevent dental implants microbial colonization.

The aim of this prospective study was to compare implant success rate and crestal bone loss around tilted and straight implants supporting immediate-loading full-arch rehabilitations. Twenty consecutive patients with edentulous jaws treated between June 2013 and July 2015 who satisfied all inclusion and exclusion criteria were included in the study. All patients were rehabilitated through a full-arch restoration supported by 4 or 6 immediately loaded implants. Clinical and radiographic examinations were scheduled every 12 months to evaluate implant success rates and crestal bone levels. Significant differences in crestal bone levels and success rates between straight and tilted implants were investigated by means of independent statistical analysis; differences were regarded as significant if P < .05. Seventy straight and 50 tilted implants were placed to rehabilitate 14 mandibles and 12 maxillae in 20 patients. After a follow-up of 12 to 36 months, survival rate was 97.1% for straight implants and 96.0% for tilted implants; while success rates were 94.3% and 94.0%, respectively. Success and survival rates were not significantly different ( P > .05). Change in crestal bone level was 0.5 ± 0.4 mm for straight implants and 0.6 ± 0.4 mm for tilted implants ( P > .05). Straight and tilted implants seemed to have similar behavior after immediate loading rehabilitations. After functional loading, straight and tilted implants did not differ significantly in clinical outcome.

Aim: several strategies have been tested in recent years to prevent bacterial colonization of dental implants. Sericin, one of the two main silk proteins, possesses relevant biological activities and also literature reports about its potential antibacterial properties, but results are discordant and not yet definitive. The aim of this study was to evaluate the effectiveness of different experimental protocols in order to obtain a sericin-based coating on medical grade titanium (Ti) able to reduce microbial adhesion to the dental implant surface., Materials and Methods: different strategies for covalent bonding of sericin to Ti were pursued throughout a multi-step procedure on Ti-6Al-4V disks. The surface of grade 5 Ti was initially immersed in NaOH solution to obtain the exposure of functional -OH groups. Two different silanization strategies were then tested using aminopropyltriethoxysilane (APTES). Eventually, the bonding between silanized Ti-6Al-4V and sericin was obtained with two different crosslinking processes: glutaraldehyde (GLU) or carbodiimide/N-Hydroxy-succinimide (EDC/NHS). Micro-morphological and compositional analyses were performed on the samples at each intermediate step to assess the most effective coating strategy able to optimize the silanization and bioconjugation processes. Microbiological tests on the coated Ti-6Al-4V disks were conducted in vitro using a standard biofilm producer strain of Staphylococcus aureus (ATCC 6538) to quantify the inhibition of microbial biofilm formation (anti-biofilm efficacy) at 24 hours., Results: both silanization techniques resulted in a significant increase of silicon (Si) on the Ti-6Al-4V surfaces etched with NaOH. Differences were found between GLU and EDC/NHS bioconjugation strategies in terms of composition, surface micro-morphology and anti-biofilm efficacy. Ti-6Al-4V samples coated with GLU-bound sericin after silanization obtained via vapor phase deposition proved that this technique is the most convenient and effective coating strategy, resulting in a bacterial inhibition of about 53% in respect to the uncoated Ti-6Al-4V disks., Conclusions: The coating with glutaraldehyde-bound sericin after silanization in the vapor phase showed promising bacterial inhibition values with a significant reduction of S. aureus biofilm. Further studies including higher number of replicates and more peri-implant-relevant microorganisms are needed to evaluate the applicability of this experimental protocol to dental implants.

Aim: The aim of this study was to analyze the clinical outcomes after using an innovative implant system characterized by a modern platform-switched Morse taper connection and an osteo growth induction titanium surface (a particular type of SLA surface). Peri-implant bone loss (PBL) and implant success rate were examined after a 1- to 3-year follow-up., Methods: The study was conducted as a cross-sectional analysis on all patients treated from January 2011 to December 2014 using CLC CONIC implants. Implants were divided into 3 main groups, based on the duration of the follow-up (1 year, 2 years, and 3 years), then subgrouped by diameter, length, and type of prosthetic rehabilitation to compare differences in PBL. X-rays were taken at the time of surgery, at prosthetic loading, at 1 year, and then annually thereafter. Previously-established success criteria were used to assess the implants. Frequency analyses and comparisons between the means (with 95% CI) were conducted for the statistical analysis of the data collected., Results: One hundred twenty patients met inclusion and exclusion criteria, and completed the follow-up, and were thus eligible for the study, with a total of 261 CLC CONIC implants. The mean follow-up was 22.45 months. No implants failed, giving an overall success rate of 100%. The average PBL at 1-year follow-up was 0.047 mm, at 2 years it was 0.128 mm, and at 3 years it was 0.236 mm., Conclusions: The CLC CONIC implant system had a high success rate after 1 to 3 years of follow-up, in line with previous reports in the scientific literature. Combining platform switching with the Morse taper connection enabled stable bone levels to be achieved in the short to medium term.

Background: Bromelain belongs to a group of protein-digesting enzymes obtained commercially from the fruit or stem of pineapple. Several studies demonstrated that bromelain exhibits various fibrinolytic, anti-edematous, antithrombotic, and anti-inflammatory activities supporting its application for many therapeutic benefits. The aim of this study was to analyze the effects of bromelain on the pro-wound healing activities and the regenerative properties of mesenchymal stem cells., Methods: Mesenchymal stem cells were treated in vitro with bromelain alone or combined with dexamethasone sodium phosphate. Real-time polymerase chain reaction was performed to profile the expression of extracellular matrix components and remodeling enzymes, and cytokines., Results: The combination of bromelain and dexamethasone sodium phosphate induced a great activation of mesenchymal stem cells with an increase in hyaluronan and collagen production and anti-inflammatory cytokines release., Conclusion: Based on the results of this in vitro study, the combined use of bromelain and dexamethasone sodium phosphate stimulated the pro-wound healing activities and the regenerative properties of mesenchymal stem cells better than bromelain and dexamethasone alone.

The body-wide human microbiome plays a role in health, but its full diversity remains uncharacterized, particularly outside of the gut and in international populations. We leveraged 9,428 metagenomes to reconstruct 154,723 microbial genomes (45% of high quality) spanning body sites, ages, countries, and lifestyles. We recapitulated 4,930 species-level genome bins (SGBs), 77% without genomes in public repositories (unknown SGBs [uSGBs]). uSGBs are prevalent (in 93% of well-assembled samples), expand underrepresented phyla, and are enriched in non-Westernized populations (40% of the total SGBs). We annotated 2.85 M genes in SGBs, many associated with conditions including infant development (94,000) or Westernization (106,000). SGBs and uSGBs permit deeper microbiome analyses and increase the average mappability of metagenomic reads from 67.76% to 87.51% in the gut (median 94.26%) and 65.14% to 82.34% in the mouth. We thus identify thousands of microbial genomes from yet-to-be-named species, expand the pangenomes of human-associated microbes, and allow better exploitation of metagenomic technologies., (Copyright © 2019 The Author(s). Published by Elsevier Inc. All rights reserved.)

This short report describes a clinical case in which an implant-supported crown was made using an extracted natural tooth as the outer shell. The same tooth had been previously relined for immediate loading without occlusal contacts. Using digital software, a composite resin mesostructure was fabricated in order to place the crown in the correct occlusal position, and the natural crown was ground using a computer-controlled milling machine to perfectly fit on the mesostructure.

Purpose: This study aimed to (1) investigate the success of posterior implants tilted >45° when 4 immediately loaded implants were used to support full-arch prostheses, eliminating any distal cantilever and (2) examine the effect on marginal bone loss (MBL) of different combinations of anterior multi-unit abutment (MUA) angles and posterior implant tilting angles., Materials and Methods: Records of patients rehabilitated according to the Columbus Bridge Protocol were analyzed. Peri-implant bone levels (PBLs) and MBL were measured for each implant. The influence of posterior implant tilting angle on PBL, MBL, and implant and prosthetic success rate was investigated. The impact on the same endpoints of different anterior MUA angles, and different combinations of anterior MUA and tilted posterior implant angles was also examined., Results: Records of 41 patients were analyzed, for a total of 46 complete rehabilitations, and 142 implants (52 anterior, 63 posterior tilted ≤45° [group 1], and 27 posterior tilted >45° [group 2]). No implants were lost during the follow-up (25.9 months), and no prosthetic complications were reported. Success rate for posterior implants was 100% in group 1 and 96.3% in group 2. Mean MBL differed significantly between the 2 groups (0.45 mm in group 1, 0.66 in group 2 [P = .04]), but not when the analysis was limited to implants in the same jaw. Implant tilting angle did not correlate with MBL and the MUA angle had no effect on bone resorption around posterior implants, neither in the sample as a whole nor in individual patients., Conclusions: Posterior implants tilted >45° to eliminate distal cantilever may be as safe as those tilted less in severely atrophic jaws rehabilitated with immediately loaded, full-arch prostheses supported on 4 implants. Further prospective studies on larger samples of patients and implants and with longer follow-up are needed to confirm these findings., (© 2018 Wiley Periodicals, Inc.)