Search

Superconducting nanostrip single photon detectors have emerged as the highest performing single-photon detectors; however, the possibility to use superconducting microstrip as single photon detectors is very appealing both to use them as larger areas detectors and for an easier technology in the manufacturing. The aim of this work is to test the photoresponse in liquid helium dewar of 9 nm thick MoSi covered with a very thin (2 nm) layer of Al, in two different configurations: nanomeanders and microstrips. We demonstrate that MoSi/Al microstrips can work as photodetectors also at T = 4.2 K. We also compare the dark count rate of the microstrip and the nanowire, confirming the lower noise for the microstrips also at 4.2 K.

The coexistence between ferromagnetic ordering and superconducting transport in tunnel ferromagnetic Josephson junctions (SFS JJs) accounts for a wide range of unconventional physical properties. The integration of both insulating ferromagnets or multi-layered insulator-ferromagnet barriers allows to combine ferromagnetic switching properties with peculiar low quasiparticle dissipation, which could enhance the capabilities of SFS JJs as active elements in quantum circuits. Here we show that split-transmon qubits based on tunnel ferromagnetic JJs realize an ideal playground to study noise fluctuations in ferromagnetic Josephson devices. By considering the transport properties of measured Al-based tunnel SFS JJs, we report on a theoretical study of the competition between intrinsic magnetization fluctuations in the barrier and quasiparticles dissipation, thus providing specific operation regimes to identify and disentangle the two noise sources, depending on the peculiar properties of the F layer and F/S interface.

Detection of single infrared photons in superconducting microstrips of 4 nm thick disordered Nb0.15Re0.85 has been investigated. Microstrips with a critical temperature of 5.15 K and widths from 1.0 to 2.5 μm have been fabricated by optical lithography. We demonstrate single photon detection sensitivity at 1.5 μm wavelength at a temperature of 1.79 K. By investigating the detection process at this temperature, we find that the current bias threshold is at 21% of the depairing current. This threshold is similar to what should be observed in typical amorphous superconductors, which confirms that ultrathin disordered Nb0.15Re0.85 is an interesting material for superconducting microstrip single photon detectors that operate above 1 K.

In this work we present the results of the fabrication and characterization of a large area Superconducting Nanowire Single Photon Detector (SNSPD). A particular geometry was adopted to enhance the coupling with the Lidar system MALIA (Multiwavelength Lidar Apparatus), a setup used for atmospheric aerosols observations from ultraviolet to infrared. The devices realized are very promising as they exhibit a very low dead time despite the large sensitive area.

The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.

The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor-ferromagnet-superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-$\ensuremath{\pi}$ transition in tunnel-ferromagnetic spin-filter JJs could also enhance the capabilities of SFS JJs as active elements. Here, we provide a self-consistent electrodynamic characterization of $\mathrm{Nb}\mathrm{N}$/$\mathrm{Gd}\mathrm{N}$/$\mathrm{Nb}\mathrm{N}$ spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the $I$-$V$ characteristics at 4.2 K and at 300 mK by using the tunnel-junction-microscopic model allows us to determine the subgap resistance ${R}_{\mathrm{sg}}$, the quality factor $Q$, and the junction capacitance $C$. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel-ferromagnetic JJs as active elements in quantum and classical circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.

Experimental results concerning the synthesis of gold nanoparticles prepared by alcoholic reduction of Au(III) ions in presence of a polymeric stabilizer, and UV-visible spectroscopic characterization is presented. Optical spectroscopic data have been correlated to off-line size measurements obtained analysing transmission electron micrographs. The gold cluster size, coming from both TEM micrographs and absorbance cubic root, behaved linearly with time above a threshold temperature (70 $^\circ$ C) according to a deposition-controlled growth mechanism. The plasmon peak halfwidth behaved linearly with inverse particle radius (obtained by TEM), thus proving the hypothesized mechanism growth. The spectroscopic approach allows an on-line gold cluster measurement with possibility to fine control particle size also in the case of a fast process.

Nanowires of Y-Ba-Cu-O, with the thickness of 50 nm and the width ranging from 90 nm to 500 nm have been successfully grown on lanthanum aluminate substrates for photon detection experiments. The nanowires were up to 10-mu m long and formed a meander structure, covering the area of up to 30x10 mu m(2) with a fill factor of 50%. The samples were excited using optical laser pulses at a 1550 nm wavelength and resulting photoresponse signals were measured as a function of both temperature and normalized bias current. Presence of two, distinct regimes in the photoresponse temperature dependence has been clearly evidenced, suggesting different physical mechanisms of the signal formation. Presented experimental results shed new light on prospects of implementation of high-temperature superconducting oxides in photon detection and counting.

The possible use of high-temperature superconductors (HTS) for realizing superconducting nanowire single-photon detectors is a challenging, but also promising, aim because of their ultrafast electron relaxation times and high operating temperatures. The state-of-the-art HTS nanowires with a 50-nm thickness and widths down to 130 nm have been fabricated and tested under a 1550-nm wavelength laser irradiation. Experimental results presenting both the amplitude and rise times of the photoresponse signals as a function of the normalized detector bias current, measured in a wide temperature range, are discussed. The presence of two distinct regimes in the photoresponse temperature dependence is clearly evidenced, indicating that there are two different response mechanisms responsible for the HTS photoresponse mechanisms.

Archimedes is a feasibility study of a future experiment to ascertain the interaction of vacuum fluctuations with gravity. The experiment should measure the force that the earth's gravitational field exerts on a Casimir cavity by using a small force detector. Here we analyse the main parameters of the experiment and we present its conceptual scheme, which overcomes in principle the most critical problems., Comment: 3 pages, MG14 Conference

We find an unambiguous relationship between disorder-driven features in the temperature dependence of the resistance and the behavior, as functions of the temperature, of the parameters necessary to describe some of the relaxation processes in the photoinduced differential time-resolved reflectivity of three samples of ${\text{Nd}}_{1.83}{\text{Ce}}_{0.17}{\text{CuO}}_{4\ifmmode\pm\else\textpm\fi{}\ensuremath{\delta}}$. The latter, sharing the same $\text{Ce}$ content, have been fabricated and annealed ad hoc in order to differ only for the degree of disorder, mainly related to oxygen content and location, and, consequently, for the temperature dependence of the resistance: Two of them present a minimum in the resistance and behave as a superconductor and as a metal, respectively; the third behaves as an insulator. The systematic coherence between the resistance and the relaxation parameters behaviors in temperature for all three samples is absolutely remarkable and shows that pump-probe measurements can be extremely sensitive to disorder as it drives the emergence of new excitations and of the related relaxation channels as in this paradigmatic case.

By using nanolithography and a soft etching procedure, we have realized YBa2Cu3O7-x/La0.7Sr0.3MnO3 (YBCO/LSMO) nanowires, with cross sections down to 100 x 50 nm(2) that ensure the cover age of areas up to 10 x 30 mu m(2). The LSMO layer acts as a capping for YBCO, minimizing the degradation of the superconducting properties taking place during the patterning; moreover, as a ferromagnetic manganite, it is expected to accelerate the relaxation dynamics of quasiparticles in YBCO, making such a system potentially attractive for applications in superconducting ultrafast optoelectronics. The reproducibility of the values of the critical current densities measured in different devices with the same geometry makes our nanowires ideal candidates for photoresponse experiments. First measurements have shown a satisfactory photoresponse from YBCO/LSMO devices.

Nanostripes of hybrid superconductor/ferromagnetic (S/F) NbN/NiCu bilayers and pure superconducting NbN nanostripes have been investigated in dark count experiments. Presence of a ferromagnetic layer influences the superconducting properties of the S/F bilayer, such as the critical current density and the transient photoresponse. The observed significant decrease of the dark-count rate is discussed in terms of vortex-related fluctuation models to shed more light in the intriguing question of the basic mechanism responsible for dark counts in superconducting nanostripe single photon detectors.

In this work an eddy current technique based on a HTS-SQUID (superconducting quantum interference device) is used to evaluate the relation between the magnetic field response and the damage process of one of the most promising fibre metallic laminates known as GLARE®. In particular the magnetic field response due to impact loading at energies ranging from 5 to 36 J has been detected. The magnetic field signal from GLARE® specimens in the presence of mechanical damaging is discussed according to a simple electromagnetic model.

The main advantage of using SQUIDs in NDE is its unrivalled magnetic sensitivity down to very low frequencies, which allows the detection of weak magnetic fields due to defects also in very low electrical conductive materials like CFRP, commonly used in aerospace structures. In this work the fatigue damage evaluation on CFRP laminates, cross-ply or quasi-isotropic, in real-time during quasi-static loading is monitored. The material responses are detected by using an Eddy Current technique with HTS dc SQUID magnetometer.

We present an experimental characterization of multidirectional fibre composites based on eddy current testing using HTS dc SQUID (Superconducting Quantum Interference Device) magnetometers. The correlation between the mechanical tolerance of CFRPs with different thickness and the phase gradient of the magnetic field generated by damage is shown. The eddy current based SQUID NDE is used to detect damage not visible to the naked eye and to study the effect of an impact far from the point of impact. The aim of this work is to demonstrate the capability of our technique to provide information on early stage damage due to an impact process in an unshielded environment.

The behavior of a Josephson system under pulsed operation is of utmost importance for developing reliable digital devices working at very high clock frequencies. Information about effect of thermal noise over pulsed operation is also useful to design errors free devices. Recent experiments in a system of two stacked junctions show that pulses applied to the first junction (injector) of the stack drive the Josephson biased second junction (detector) in the resistive state. The experiment was interpreted as pulsed-assisted escape toward resistive state as a consequence of an excitation of large non-linear oscillations in the detector junction that, with the contribution of thermal noise, drives out the junction from the zero voltage state. Moreover, an unstability of the resistive state toward the zero voltage state under the same pulsed operation was also noted. By means of a systematic numerical approach to the problem, we present a study of the pulsed-assisted escape using the framework of the thermal escape theory for the direct transition from zero voltage state to resistive state. We study the single junction case and a stacked configuration as examples of different systems showing pulsed-assisted escape. (C) 2002 Elsevier Science B.V. All rights reserved.

We propose an analytical method for generating a two-dimensional quasiperiodic pattern with dodocagonal rotational symmetry. The method allows producing the quasiperiodic structure by a finite number of translational steps of a properly designed repeating unit. The quasiperiodic symmetry affects the diffraction pattern and its characteristics are analyzed via theoretical calculation of the Fourier spectrum of the structure. We show that it is possible to express the Fourier spectrum in terms of the spectral distribution of the basic unit. © 2014 IEEE.

A composite material of a polyethylene matrix filled by a fine silver powder was prepared with different Ag contents and physical behaviours ranging from insulator to conductor. Ac differential magnetic susceptibility chi measurements show the samples are paramagnetic up to an Ag concentration of similar to 65%. At low temperatures the composite is spin-glass type, whereas the transition from insulator to conductor corresponds to an abatement of chi at zero magnetizing field. Magneto-conductivity effects have been observed in resistivity measurements at low temperatures. They can be explained in terms of an effective exchange electronic scattering mechanism between the conduction electrons and the diluted magnetic moments arising from unpaired electron spins of boundary silver particles. Moreover, the presence of a broad minimum in the resistivity curve at T =similar to 20 K, observed in samples with an Ag concentration just above the percolation threshold, addresses to possible interference effects similar to those reported in disordered materials.

A superconducting transistor with large current gain and bandwidth at low temperatures would have many applications. We have fabricated and tested a new three-terminal superconducting device with transistor-like properties at an operating temperature of 4.2 K. It is based on a stacked double tunnel junction structure where the intermediate film is a bilayer of superconducting Nb and an Al quasiparticle trap which can work either in the superconducting or in the normal metal state. Current amplification factors of up to 2.0 are observed at a temperature of 4.2 K when the Al is superconducting, while large current gains of more than 50 are observed when the Al is in the normal state. The device shows a high degree of unidirectionality. The results can be explained on the basis of the recently proposed QUAsiparticle TRApping TRANsistor, which should have wide applications in detection systems operating at low temperatures.

The interest in magnetometry for eddy-current non-destructive testing, e.g. of planar conductive structures encountered in the aircraft industry, using high-temperature superconducting quantum interference devices (SQUIDs) is primarily due to their high sensitivity to magnetic flux even at very low frequencies. Here it is shown how theoretical, numerical and measurement machineries are combined to get reasonable synthetic and experimental data and to reach a good understanding of the interaction of diffusive wavefields with a damaged non-magnetic metal plate (as a first step towards the retrieval of pertinent features of the defects). The measurement modalities are considered first. It is illustrated in some detail how laboratory-controlled experiments are performed by a SQUID-based probe displaced above artificially damaged plates. Experimental data are then confronted with simulation results in order to evaluate the accuracy and reliability of this measurement system. Simulations are carried out by a computationally fast vector volume integral method dedicated to a planar layering affected by a volumetric defect, which involves the construction of the dyadic Green system of the layering.

We have fabricated and characterised superconducting tunnel junctions with annular geometry for radiat ion detection. The advantage of the annular geometry is that, once the trapping has occurred the magnetic field can be switched off and there is no need to further sustain any parallel magnetic field during the detector working time. In agreement with our previous theoretical prediction we have observed the suppression of the Josephson critical current and the presence of one single resonance step in the I-V characteristic when magnetic fluxons were trapped in the: central hole of the junction. (C) 2000 Elsevier Science B.V. All rights reserved.

The nonequilibrium behavior of the Josephson critical current produced by the absorption of an incident energy quantum in a superconducting tunnel junction detector has been studied in the framework of nonequilibrium theory. The dependence of the Josephson current on the released energy (x-ray and ultraviolet photons) has been obtained in the limit k(B)T much less than Delta. Possible designs for high-energy resolution radiation/particle detectors are presented and discussed in terms of detection properties. [S0163-1829(99)03841-2].

Superconducting Tunnel Junctions (STJ) are promising devices as a next generation of nuclear and optical detectors. Non-equilibrium experiments can provide useful information on the behaviour of a perturbed superconductor. Among possible nonequilibrium sources, we used quasi-particle injection in three-terminal double tunnel junction devices and a laser pumping source. We investigated the effect of perturbed conditions on sub-harmonic gap structures, which are present in I-V characteristics of high quality Nb-based STJs. Experimental results concerning the change of the energy gap measured at V=2/spl Delta//2e show features which can not be completely explained in terms of simple heating effects.

An experimental study of quasi-particle trapping in proximised Nb/Al layers with different Al thicknesses is presented using symmetrical 3-terminal stacked double tunnel junctions. The experimental tunnelling efficiency of such devices is measured at temperatures down to 1.2 K for different injection current rates. The role of Al layers in the intermediate electrode is discussed in terms of effective non equilibrium processes. The agreement with existing theories on nonequilibrium in such proximity structures makes these results important toward a better understanding of the underlying physics in high resolution particle spectrometers.

Transport properties of NbN/NiCu superconductor/ferromagnet (S/F) nanostripes fabricated in both in single-wire and series-parallel, meander-type configurations are presented down to T = 4.2 K. In particular, the enhancement of the superconducting critical current has been observed at smaller widths, apparently, due to an extra pinning mechanism, arising from clustering of ferromagnetic atoms inside the thin S layer. Moreover, we observed a number of characteristic voltage steps on the nanostripe current-voltage characteristics and their nature was investigated as a function of temperature. An explanation in terms of active phase-slip phenomena has been proposed based of the time-dependent Ginzburg-Landau theory and led to an estimation of the inelastic electron-phonon relaxation time τe-ph ~ 1 ps, in agreement with the τopt = 1.2±0.3 ps value, measured by the femtosecond transient optical reflectivity spectroscopy method on the same bilayer. Transient optical properties of our superconducting S/F nano-bilayers have been also investigated and compared to those obtained for pure NbN nanostripe reference samples. Finally, electrical photoresponse signals of S/F heterostructures exposed to ultraweak pulsed (width 400 ps, repetition rate ~100 MHz) laser radiation at 850 nm wavelength exhibited the falling time of voltage responses directly dependent on the NiCu overlayer. We have also noticed that the presence of the top F layer and the resulting proximity effect reduced frequency of dark counts in our samples.

We present femtosecond pump-probe spectroscopy studies of time-resolved optical reflectivity of all-oxide YBa2Cu3O7/La0.7Sr0.3MnO3 (YBCO/LSMO) superconductor/ferromagnet (S/F) bilayers consisting of a 100-nm-thick YBCO base layer and either 10 or 35 nm LSMO cap thickness. At temperatures far below the YBCO superconducting transition T-C, samples with a 10 nm F overlayer show a photoresponse that is similar to, but faster than, pure-YBCO, 100-nm-thick reference samples, while close to T-C and above (up to similar to 160 K) we observe a signature of both the electronic and spin response that cannot be interpreted as an incoherent sum of contributions from the two layers. The photoresponse of the S/F structures with the 35-nm LSMO layer always qualitatively follows that of the pure LSMO, but with a shorter relaxation time. In all cases, the YBCO/LSMO nonequilibrium dynamics can be modeled using a generalized multitemperature model, which is a superposition of the dynamics of the three-temperature models that are used to describe the superconductor and ferromagnet subsystems, respectively. The long term of the photoresponse signal of the S/F bilayer can be well fitted with the two characteristic relaxation times. DOI: 10.1103/PhysRevB.87.134514

We present femtosecond pump-probe spectroscopy studies of time-resolved optical reflectivity of all-oxide YBa2Cu3O7/La0.7Sr0.3MnO3 (YBCO/LSMO) superconductor/ferromagnet (S/F) bilayers consisting of a 100-nm-thick YBCO base layer and either 10 or 35 nm LSMO cap thickness. At temperatures far below the YBCO superconducting transition T-C, samples with a 10 nm F overlayer show a photoresponse that is similar to, but faster than, pure-YBCO, 100-nm-thick reference samples, while close to T-C and above (up to similar to 160 K) we observe a signature of both the electronic and spin response that cannot be interpreted as an incoherent sum of contributions from the two layers. The photoresponse of the S/F structures with the 35-nm LSMO layer always qualitatively follows that of the pure LSMO, but with a shorter relaxation time. In all cases, the YBCO/LSMO nonequilibrium dynamics can be modeled using a generalized multitemperature model, which is a superposition of the dynamics of the three-temperature models that are used to describe the superconductor and ferromagnet subsystems, respectively. The long term of the photoresponse signal of the S/F bilayer can be well fitted with the two characteristic relaxation times. DOI: 10.1103/PhysRevB.87.134514

Femtosecond spectroscopy has been used to investigate the quasiparticle relaxation times in a nearly optimally doped chalcogenide superconducting FeSe0.5Te0.5 thin film. It is characterized by an enhancement of the critical temperature Tc = 19.1 K by strain. Experimental results indicate the existence of a temperature dependence of the quasiparticle recombination time τR in the superconducting state where an energy gap Δ(T) is present. A fitting procedure based on a BCS-like assumption for τR gives Δ0 = 4.1 ± 0.4 meV for the superconducting energy gap extrapolated at T = 0, which corresponds to 2Δ0/kBTc = 4.9 ± 0.5. Accordingly, an estimation of the characteristic phonon energy and the electron–phonon coupling constant λ is reported and discussed. The obtained value λ ≈ 0.6 is in good agreement with other similar determinations obtained by different techniques and numerical approaches. The small value of λ confirms that a phonon-mediated coupling cannot be the only mechanism leading to the formation of the superconducting state in FeSeTe films.

The dynamic instability of the moving vortex lattice at high driving currents in NbN/CuNi-based and NbN nanostripes designed for optical detection has been studied. By applying the model proposed by Larkin and Ovchinnikov [Zh. Eksp. Teor. Fiz. 68, 1915 (1975)], from the critical velocity ${v}^{*}$ for the occurrence of the instability, it was possible to estimate the values of the quasiparticle relaxation times ${\ensuremath{\tau}}_{E}$. The results show that the NbN/CuNi-based devices are characterized by shorter values of ${\ensuremath{\tau}}_{E}$ compared to that of NbN.

The current fluctuations in a polystyrene matrix (PS) doped by gold nanoparticles (Au-NPs) and small conjugated molecules of 8-hydroxyquinoline (8HQ) have been characterized. The electrical properties of the PS composite allow using it as a responsive layer in non-volatile memory devices due to its switching capability between two well separated conducting states. The analysis of current fluctuations at fixed bias voltages showed the presence of two states in charge carrier transport regardless of the operating conducting state of the device. Moreover, noise spectra have been investigated in the low frequency region, allowing the estimation of charge relaxation times between current levels in the two memory states. The presence of these slow and large fluctuations can seriously affect the final electrical performances of this class of nanostructured memories.

We present measurements of ferromagnet/superconductor (NiCu/NbN) and plain superconducting (NbN) nanostripes with the linewidth ranging from 150 to 300 nm. The NiCu (3 nm)/NbN (8 nm) bilayers, as compared to NbN (8 nm), showed a up to six times increase in their critical current density, reaching at 4.2 K the values of 5.5 MA/cm2 for a 150 nm wide nanostripe meander and 12.1 MA/cm2 for a 300 nm one. We also observed six-time sensitivity enhancement when the 150 nm wide NiCu/NbN nanostripe was used as an optical detector. The strong critical current enhancement is explained by the vortex pinning strength and density increase in NiCu/NbN bilayers and confirmed by approximately tenfold increase in the vortex polarizability factor.

Among superconducting materials used in developing high performance nanowire detectors, NbN demonstrated to have unique characteristics in terms of fast response time, quantum efficiency and photon-number resolving capability. We investigated the role of proximity effect on superconducting NbN thin films covered by a weak ferromagnetic NiCu thin layer. Hetero-structures NbN/NiCu have been deposited by DC magnetron sputtering on MgO substrates without any heating. Characterization in terms of morphological, transport, and ultra-fast optical properties has been done. Superconducting nanowires with meander-type geometries (48 micron lengths and

We have fabricated and studied a stacked superconducting double tunnel junction device with transistor-like properties. The intermediate electrode is a bilayer consisting of a Nb film together with an Al film that acts as a quasiparticle trap. Large current gains of more than 50 are observed at 4.2 K when the Al layer is normal. The operation is highly directional. Results are explained on the basis of trapping of quasiparticles from a superconductor into a normal metal, together with a conversion of relaxation energy into electronic excitations. Similar devices should have wide applications in low-temperature measurement and detection systems.

Magnetic semiconductors such as Ga 1-x Mn x As have attracted a great interest in the last years due to their high potential as advanced-performance materials in optical detection and in novel spintronic devices. The carrier dynamics and the nonlinear optical response in low-temperature–grown GaAs/Ga 1-x Mn x As heterostructures represent an interesting topic much less explored than their electronic transpor t and/or structural studies. We report our optical investigations of Ga 1-x Mn x As films, grown with different Mn concentrations and subject to annealing conditions, by time-resolved, femtosecond pump-probe, differential reflectivity measurements. The analysis of the carrier relaxation times at low temperatures is presented and discussed according to nonequilibrium theories fo r electron scattering in magnetic materials. Keywords: optical pump-probe spectroscopy, magnetic semiconductors , carrier relaxation, spintronics, femtosecond lasers. 1. INTRODUCTION Magnetic semiconductors such as Ga

In this work we present non-destructive evaluation measurements on fiber/metal laminate specimen by using eddy current techniques employing HTc SQUID (superconductive quantum interference device) and giant magneto-resistive (GMR) sensors. Our aim is to compare the performance and the capability of HTc SQUID and GMR sensors to detect the presence of damage inside FML composite materials. Experimental results concerning the detection of artificial defects in aeronautical structures with high magnetic sensitivity by using HTc SQUID, and with high spatial resolution using GMR, will be presented and discussed.

This paper reports on Giant‐Magneto Resistance (GMR) electronic second order gradiometer used as an EC probe to detect defects in Al‐Ti riveted multi‐layers non‐magnetic metallic samples used in aircraft structures. An electronic characterization of the GMR gradiometer set‐up for investigating the probe performance and its magnetic field sensitivity is presented. The comparison between magnetic images obtained by GMR probes and conventional excitation coils demonstrates the possibility to use successfully GMR technology as sensors for NDT applications.

Superconductive thin films of Y-Ba-Cu-O have been grown in situ by r.f. magnetron sputtering from a single stoichiometric target on Al2O3 substrates. Zero-resistivity temperatures as high as 73 K have been achieved. X-ray and EDS analyses have been performed on the samples. The dependence of film features on deposition conditions is also discussed.

We explored the modification of polymeric film conductivity by changing the conducting filler percentage in the frame of the percolation theory. The polymeric film is a polystyrene (PS) matrix, while the fillers are gold nanoparticles capped with 1‐dodecanethiol (Au‐DT NPs) and small conjugated molecules 8‐ hydroxyquinoline (8HQ). Experimental results show, that increasing the Au‐ DT and 8HQ wt%, film conductivity increases by up to three orders of magnitude due to charge transfer in the 3D network composed by Au‐ DT NPs and 8HQ.

Ferromagnet/superconductor (F/S) bilayers composed of ultrathin metallic films demonstrate new proximity effects and show a peculiar behavior of the superconductor-order parameter. In terms of applications, F films provide additional "anchoring" of the S film vortex lattice, resulting in increased critical current. By changing composition and the thickness ratio of the F/S bilayer, one can modify the quasiparticle dynamics through an effective enhancement or suppression of the quasiparticle lifetime under nonequilibrium conditions. The latter effect should lead to "custom-designed" superconducting detectors, with the sensitivity and photoresponse speed tailored to a given application. We present fabrication details of nanometer-thickness NiCu/Nb bilayers of different F/S ratios. The NiCu/Nb structures have been implemented to fabricate Josephson junctions and tested using femtosecond optical spectroscopy. The time-resolved photoresponse experiments allowed us to measure the quasiparticle relaxation dynamics in our bilayers. In addition, the photoresponse temperature dependence studies revealed the spatial evolution of the superconductor-order parameter across the bilayer. Comparison between the bilayer data and the single-material data is also presented.

The aerospace and aeronautical industries pay much attention to improve flight safety of the airlines. In aircraft design it is important to couple low structural weight with high damage tolerance. For this reason, a new class of advanced composite materials, named Fiber/Metal Laminates (FML), which combine the best features of organic matrix composites and metals, are used. In this work, a nondestructive evaluation of FML specimens based on an eddy-current technique that uses an HTS SQUID (Superconductive QUantum Interference Device) magnetometer is proposed. The aim is to demonstrate that this technique is capable of detecting the presence of damage hidden by plastic deformation after impact events.