Search

The purpose of this descriptive study was to examine school string teachers' beliefs about and practices of teaching nontraditional music courses. We surveyed middle and high school string teachers (N = 42) about what nontraditional music courses and ensembles (NMCEs) they currently offer and would like to offer to their students. In addition, we examined the educational rationales that string teachers have for offering NMCEs. Our findings indicated that the most frequently offered NMCEs were guitar class, pit orchestra, and music technology. Participants expressed strongest interest in adding fiddle club, popular music, and mariachi ensemble. The participants explained that NMCEs provide opportunities to teach content that closely may more reflect students' cultures and possibly attract a wider range of students. The participants used NMCEs to cultivate musical skills that are often overlooked in large-group setting, including improvisation, playing by ear, and collaborative arranging and composition.

Abstract Obesity adversely affects bone and fat metabolism in mice and humans. Omega-3 polyunsaturated fatty acids (omega-3 PUFAs) have been shown to improve glucose metabolism and bone homeostasis in obesity. However, the impact of omega-3 PUFAs on bone marrow adipose tissue (BMAT) and bone marrow stromal cell (BMSC) metabolism has not been intensively studied yet. In the present study we demonstrated that omega-3 PUFA supplementation in high fat diet (HFD + F) improved bone parameters, mechanical properties along with decreased BMAT in obese mice when compared to the HFD group. Primary BMSCs isolated from HFD + F mice showed decreased adipocyte and higher osteoblast differentiation with lower senescent phenotype along with decreased osteoclast formation suggesting improved bone marrow microenvironment promoting bone formation in mice. Thus, our study highlights the beneficial effects of omega-3 PUFA-enriched diet on bone and cellular metabolism and its potential use in the treatment of metabolic bone diseases.

Recent studies highlighted the crucial contribution of subchondral bone to OA development. Yet, only limited data have been reported on the relation between alteration to cartilage morphology, structural properties of the subchondral bone plate (SBP) and underlying subchondral trabecular bone (STB). Furthermore, the relationship between the morphometry of the cartilage and bone in the tibial plateau and the OA-induced changes in the joint’s mechanical axis remains unexplored. Therefore, a visualisation and quantification of cartilage and subchondral bone microstructure in the medial tibial plateau was performed. End stage knee-OA patients with varus alignment and scheduled for total knee arthroplasty (TKA) underwent preoperative fulllength radiography to measure the hip-knee-ankle angle (HKA) and the mechanical-axis deviation (MAD). 18 tibial plateaux were μ-CT scanned (20.1 μm/voxel). Cartilage thickness, SBP, and STB microarchitecture were quantified in 10 volumes of interest (VOIs) in each medial tibial plateau. Significant differences (p < 0.001) were found for cartilage thickness, SBP, and STB microarchitecture parameters among the VOIs. Closer to the mechanical axis, cartilage thickness was consistently smaller, while SBP thickness and STB bone volume fraction (BV/TV) were higher. Moreover, trabeculae were also more superior-inferiorly oriented, i.e. perpendicular to the transverse plane of the tibial plateau. As cartilage and subchondral bone changes reflect responses to local mechanical loading patterns in the joint, the results suggested that region-specific subchondral bone adaptations were related to the degree of varus deformity. More specifically, subchondral sclerosis appeared to be most pronounced closer to the mechanical axis of the knee.

Abstract Spearing mantis shrimps are aggressive crustaceans using specialized appendages with sharp spikes to capture fishes with fast movement. Each spike is a biological tool that has to combine high toughness, as required by the initial impact with the victim, with high stiffness and strength, to ensure sufficient penetration while avoid breaking. We performed a multimodal analysis to uncover the design strategies of this harpoon based on chitin. We found that the spike is a slightly hooked hollow beam with the outer surface decorated by serrations and grooves to enhance cutting and interlocking. The cuticle of the spike resembles a multilayer composite: An outer heavily mineralized, stiff, and hard region (with average indentation modulus and hardness of 68 and 3 GPa), providing high resistance to contact stresses, is combined with a less mineralized region, which occupies a large fraction of the cuticle (up to 50%) and features parallel fibers oriented longitudinally, enhancing stiffness and strength. A central finding of our work is the presence of a tiny interphase (less than 10 μm in width) based on helical fibers and showing a spatial modulation in mechanical properties, which has the critical task to integrate the stiff but brittle outer layer with the more compliant highly anisotropic parallel‐fiber region. We highlighted the remarkable ability of this helicoidal region to stop nanoindentation‐induced cracks. Using three‐dimensional multimaterial printing to prototype spike‐inspired composites, we showed how the observed construction principles can not only hamper damage propagation between highly dissimilar layers (resulting in composites with the helical interphase absorbing 50% more energy than without it) but can also enhance resistance to puncture (25% increase in the force required to penetrate the composites with a blunt tool). Such findings may provide guidelines to design lightweight harpoons relying on environmentally friendly and recyclable building blocks. Key Points –The heavily mineralized biological appendages of the mantis shrimp are a constant source of inspiration for developing new engineering materials. –We use characterization methods of material science to investigate a biological harpoon based on chitin. –Several morphological, compositional, microstructural, and biomechanical features are highlighted, allowing the spikes of the mantis shrimp to be remarkable lightweight, tough, and stiff harpoons.

Abstract Femoroplasty is a procedure where bone cement is injected percutaneously into a weakened proximal femur. Uncertainty exists whether femoroplasty provides sufficient mechanical strengthening to prevent fractures in patients with femoral bone metastases. Finite element models are promising tools to evaluate the mechanical effectiveness of femoroplasty, but a thorough validation is required. This study validated a voxel-based finite element model against experimental data from eight pairs of human cadaver femurs with artificial metastatic lesions. One femur from each pair was left untreated, while the contralateral femur was augmented with bone cement. Finite element models accurately predicted the femoral strength in the defect (R2 = 0.96) and augmented (R2 = 0.93) femurs. The modelled surface strain distributions showed a good qualitative match with results from digital image correlation; yet, quantitatively, only moderate correlation coefficients were found for the defect (mean R2 = 0.78) and augmented (mean R2 = 0.76) femurs. This was attributed to the presence of vessel holes in the femurs and the jagged surface representation of our voxel-based models. Despite some inaccuracies in the surface measurements, the FE models accurately predicted the global bone strength and qualitative deformation behavior, both before and after femoroplasty. Hence, they can offer a useful biomechanical tool to assist clinicians in assessing the need for prophylactic augmentation in patients with metastatic bone disease, as well as in identifying suitable patients for femoroplasty.

HR-pQCT has become standard practice when quantifying volumetric BMD (vBMD) in vivo. Yet, it is only accessible to peripheral sites, with small fields of view and lengthy scanning times. This limits general applicability in clinical workflows. The goal of this study was to assess the potential of photon counting CT (PCCT) in quantitative bone imaging. Using the European Forearm Phantom, PCCT was calibrated to hydroxyapatite (HA) density. Eight cadaveric forearms were scanned twice with PCCT and once with HR-pQCT. The dominant forearm of two volunteers was scanned twice with PCCT. In each scan, the carpals were delineated. At bone level, accuracy was assessed with a paired measurement of total vBMD (Tt.vBMD) calculated with PCCT and HR-pQCT. At voxel-level, repeatability was assessed by image registration and voxel-wise subtraction of the ex vivo PCCT scans. In an ideal scenario, this difference would be zero; any deviation was interpreted as falsely detected remodeling. For clinical usage, the least detectable remodeling was determined by finding a threshold in the PCCT difference image that resulted in a classification of bone formation and resorption below acceptable noise levels (<0.5%). The paired measurement of Tt.vBMD had a Pearson correlation of 0.986. Compared to HR-pQCT, PCCT showed a bias of 7.46 mgHA/cm3. At voxel-level, the repeated PCCT scans showed a bias of 17.66 mgHA/cm3 and a standard error of 96.23 mgHA/cm3. Least detectable remodeling was found to be 250 mgHA/cm3, for which 0.37% of the voxels was incorrectly classified as newly added or resorbed bone. In vivo , this volume increased to 0.97%. Based on the cadaver data, we conclude that PCCT can be used to quantify vBMD and bone turnover. We provided proof of principle that this technique is also accurate in vivo , hence, that it has high potential for clinical applications. [ABSTRACT FROM AUTHOR]

Abstract The enthesis allows the insertion of tendon into bone thanks to several remarkable strategies. This complex and clinically relevant location often features a thin layer of fibrocartilage sandwiched between tendon and bone to cope with a highly heterogeneous mechanical environment. The main purpose of this study was to investigate whether mineralized fibrocartilage and bone close to the enthesis show distinctive three-dimensional microstructural features, possibly to enable load transfer from tendon to bone. As a model, the Achilles tendon-calcaneus bone system of adult rats was investigated with histology, backscattered electron imaging and micro-computed tomography. The microstructural porosity of bone and mineralized fibrocartilage in different locations including enthesis fibrocartilage, periosteal fibrocartilage and bone away from the enthesis was characterized. We showed that calcaneus bone presents a dedicated protrusion of low porosity where the tendon inserts. A spatially resolved analysis of the trabecular network suggests that such protrusion may promote force flow from the tendon to the plantar ligament, while partially relieving the trabecular bone from such a task. Focusing on the tuberosity, highly specific microstructural aspects were highlighted. Firstly, the interface between mineralized and unmineralized fibrocartilage showed the highest roughness at the tuberosity, possibly to increase failure resistance of a region carrying large stresses. Secondly, fibrochondrocyte lacunae inside mineralized fibrocartilage, in analogy with osteocyte lacunae in bone, had a predominant alignment at the enthesis and a rather random organization away from it. Finally, the network of subchondral channels inside the tuberosity was highly anisotropic when compared to contiguous regions. This dual anisotropy of subchondral channels and cell lacunae at the insertion may reflect the alignment of the underlying collagen network. Our findings suggest that the microstructure of fibrocartilage may be linked with the loading environment. Future studies should characterize those microstructural aspects in aged and or diseased conditions to elucidate the poorly understood role of bone and fibrocartilage in enthesis-related pathologies.