Search

Objectives: 3D printing found its way into various medical applications and could be particularly beneficial for dentistry. Currently, materials for 3D printing of occlusal splints lack mechanical strength compared to polymethyl methacrylate (PMMA) used for standard milling of occlusal splints. It is known that print orientation and graphene nanoplatelets (GNP) can increase biaxial strength in a variety of materials. Thus, the aim of this study was to assess if adjustment of print orientation and addition of GNP improve biaxial strength and if they affect cytotoxicity of a 3D printable resin for occlusal splints., Methods: Specimens were printed vertically and horizontally with a stereolithography (SLA) printer and multilayered GNP powder was added to the resin at different concentrations. Printed specimens were characterized by Raman spectroscopy, optical profilometer analysis and scanning electron microscopy. Biaxial strength was evaluated by biaxial flexural testing. Cytotoxicity of specimens on L929 and gingival stromal cells (GSC) was assessed by the toxdent test, the resazurin-based toxicity assay and live-dead staining., Results: Horizontally printed specimens showed significantly higher biaxial strength and lower deformation. GNP did not improve biaxial strength and material deformation of 3D-printed resins. None of the specimens were cytotoxic to L929 cells or GSC., Significance: Print orientation in SLA printing has a significant impact on biaxial strength and material deformation. 3D printable materials can reach comparable or even improved biaxial strength compared to PMMA when using the optimal print orientation while GNP has no beneficial effects on the biaxial strength of resins for 3D printing of occlusal splints., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: To design a patient-specific subperiosteal implant for a severely atrophic maxillary ridge using yttria-stabilized additively manufactured zirconia (3YSZ) and evaluate its material properties by applying topology optimization (TO) to replace bulk material with a lattice structure., Materials: A contrast-based segmented skull model from anonymized computed tomography data of a patient was used for the initial anatomical design of the implant for the atrophic maxillary ridge. The implant underwent finite element analysis (FEA) and TO under different occlusal load-bearing conditions. The resulting implant designs, in bulk material and lattice, were evaluated via in-silico tensile tests and 3D printed., Results: The workflow produced two patient-specific subperiosteal designs: a) an anatomically precise bulk implant, b) a TO lattice implant. In-silico tensile tests revealed that the Young's modulus of yttria-stabilized zirconia is 205 GPa for the bulk material and 83.3 GPa for the lattice. Maximum principal stresses in the implant were 61.14 MPa in bulk material and 278.63 MPa in lattice, both tolerable, indicating the redesigned implant can withstand occlusal forces of 125-250 N per abutment. Furthermore, TO achieved a 13.10 % mass reduction and 208.71 % increased surface area, suggesting improved osteointegration potential., Significance: The study demonstrates the planning and optimization of ceramic implant topology. A further iteration of the implant was successfully implanted in a patient-named use case, employing the same fabrication process and parameters., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Due to its high printing resolution and ability to print multiple materials simultaneously, inkjet technology has found wide application in medicine. However, the biological safety of 3D-printed objects is not always guaranteed due to residues of uncured resins or support materials and must therefore be verified. The aim of this study was to evaluate the quality of standard assessment methods for determining the quality and properties of polyjet-printed scaffolds in terms of their dimensional accuracy, surface topography, and cytotoxic potential.Standardized 3D-printed samples were produced in two printing orientations (horizontal or vertical). Printing accuracy and surface roughness was assessed by size measurements, VR-5200 3D optical profilometer dimensional analysis, and scanning electron microscopy. Cytotoxicity tests were performed with a representative cell line (L929) in a comparative laboratory study. Individual experiments were performed with primary cells from clinically relevant tissues and with a Toxdent cytotoxicity assay.Dimensional measurements of printed discs indicated high print accuracy and reproducibility. Print accuracy was highest when specimens were printed in horizontal direction. In all cytotoxicity tests, the estimated mean cell viability was well above 70% (p < 0.0001) regardless of material and printing direction, confirming the low cytotoxicity of the final 3D-printed objects., (© 2023. Springer Nature Switzerland AG.)

This editorial presents the vision for the newly formed (2022) European 3D Special Interest Group (EU3DSIG) in the landscape of medical 3D printing. There are four areas of work identified by the EU3DSIG in the current landscape, namely: 1) creating and fostering communication channels among researches, clinicians and industry, 2) generating awareness of hospitals point-of-care 3D technologies; 3) knowledge sharing and education; 4) regulation, registry and reimbursement models., (© 2023. The Author(s).)

Objectives: To develop and validate a simple approach for building cost-effective imaging phantoms for Cone Beam Computed Tomography (CBCT) using a modified Polyjet additive manufacturing technology where a single material can mimic a range of human soft-tissue radiation attenuation., Materials and Methods: Single material test phantoms using a cubic lattice were designed in 3-Matic 15.0 software . Keeping the individual cubic lattice volume constant, eight different percentage ratio (R) of air: material from 0% to 70% with a 10% increment were assigned to each sample. The phantoms were printed in three materials, namely Vero PureWhite, VeroClear and TangoPlus using Polyjet technology. The CT value analysis, non-contact profile measurement and microCT-based volumetric analysis was performed for all the samples., Results: The printed test phantoms produced a grey value spectrum equivalent to the radiation attenuation of human soft tissues in the range of -757 to +286 HU on CT. The results from dimensional comparison analysis of the printed phantoms with the digital test phantoms using non-contact profile measurement showed a mean accuracy of 99.07 % and that of micro-CT volumetric analysis showed mean volumetric accuracy of 84.80-94.91%. The material and printing costs of developing 24 test phantoms was 83.00 Euro., Conclusions: The study shows that additive manufacturing-guided macrostructure manipulation modifies successfully the radiographic visibility of a material in CBCT imaging with 1 mm 3 resolution, helping customization of imaging phantoms., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier GmbH.)

Introduction: We report one of the largest single center data from a mixed referral setting in India describing baseline characteristics and outcomes of patients with classical BCR::ABL1 negative myeloproliferative neoplasms (MPNs)., Materials and Methods: Patients diagnosed from June 2019 to 2022 were included. Workup and treatment was as per current guidelines., Results: Diagnosis comprised polycythemia vera (PV) in 51(49%), ET in 33(31.7%) and prefibrotic primary myelofibrosis (MF) pre fibrotic myelofibrosis (prePMF) and myelofibrosis in 10(9.6%) patients each. Median age at diagnosis was 52 years for PV and ET, 65.5 for MF and 79 years for prePMF. Diagnosis was incidental in 63(56.7%) and after thrombosis in 8(7.2%) patients. Baseline next generation sequencing (NGS) was available for 63(60.5%) patients. Driver mutations in PV: JAK2 in 80.3%; in ET: JAK2 in 41%, CALR in 26%, MPL in 2.9%; in prePMF JAK2 in 70%, CALR in 20%, MPL in 10%, and in MF: JAK2 in 10%, MPL in 30% and CALR in 40%. Seven novel mutations were detected of which 5 were potentially pathogenic on computational analysis. After median follow up of 30 months, 2 patients had disease transformation and none had new episodes of thrombosis. Ten patients died, most commonly with cardiovascular events(n = 5,50%). Median overall survival was not reached. Mean OS time was 10.19 years(95%CI, 8.6 to 11.74) and mean time to transformation was 12.2 years(95% CI,11.8 to 12.6)., Conclusion: Our data indicates comparatively indolent presentation of MPNs in India with younger age and lower risk of thrombosis. Further follow up will enable correlation with molecular data and guide modification of age based risk stratification models., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Conventional plate osteosynthesis of critical-sized bone defects in canine mandibles can fail to restore former functionality and stability due to adaption limits. Three-dimensional (3D) printed patient-specific implants are becoming increasingly popular as these can be customized to avoid critical structures, achieve perfect alignment to individual bone contours, and may provide better stability. Using a 3D surface model for the mandible, four plate designs were created and evaluated for their properties to stabilize a defined 30 mm critical-size bone defect. Design-1 was manually designed, and further shape optimized using Autodesk ® Fusion 360 (ADF360) and finite element analysis (FE) to generate Design-2. Design-4 was created with the generative design (GD) function from ADF360 using preplaced screw terminals and loading conditions as boundaries. A 12-hole reconstruction titanium locking plate (LP) (2.4/3.0 mm) was also tested, which was scanned, converted to a STL file and 3D printed (Design-3). Each design was 3D printed from a photopolymer resin (VPW) and a photopolymer resin in combination with a thermoplastic elastomer (VPWT) and loaded in cantilever bending using a customized servo-hydraulic mechanical testing system; n = 5 repetitions each. No material defects pre- or post-failure testing were found in the printed mandibles and screws. Plate fractures were most often observed in similar locations, depending on the design. Design-4 has 2.8-3.6 times ultimate strength compared to other plates, even though only 40% more volume was used. Maximum load capacities did not differ significantly from those of the other three designs. All plate types, except D3, were 35% stronger when made of VPW, compared to VPWT. VPWT D3 plates were only 6% stronger. Generative design is faster and easier to handle than optimizing manually designed plates using FE to create customized implants with maximum load-bearing capacity and minimum material requirements. Although guidelines for selecting appropriate outcomes and subsequent refinements to the optimized design are still needed, this may represent a straightforward approach to implementing additive manufacturing in individualized surgical care. The aim of this work is to analyze different design techniques, which can later be used for the development of implants made of biocompatible materials., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Baumgartner, Schramel, Kau, Unger, Oberoi, Peham and Eberspächer-Schweda.)

Medical imaging phantoms are widely used for validation and verification of imaging systems and algorithms in surgical guidance and radiation oncology procedures. Especially, for the performance evaluation of new algorithms in the field of medical imaging, manufactured phantoms need to replicate specific properties of the human body, e.g., tissue morphology and radiological properties. Additive manufacturing (AM) technology provides an inexpensive opportunity for accurate anatomical replication with customization capabilities. In this study, we proposed a simple and cheap protocol using Fused Deposition Modeling (FDM) technology to manufacture realistic tumor phantoms based on the filament 3D printing technology. Tumor phantoms with both homogenous and heterogeneous radiodensity were fabricated. The radiodensity similarity between the printed tumor models and real tumor data from CT images of lung cancer patients was evaluated. Additionally, it was investigated whether a heterogeneity in the 3D printed tumor phantoms as observed in the tumor patient data had an influence on the validation of image registration algorithms. A radiodensity range between -217 to 226 HUs was achieved for 3D printed phantoms using different filament materials; this range of radiation attenuation is also observed in the human lung tumor tissue. The resulted HU range could serve as a lookup-table for researchers and phantom manufactures to create realistic CT tumor phantoms with the desired range of radiodensities. The 3D printed tumor phantoms also precisely replicated real lung tumor patient data regarding morphology and could also include life-like heterogeneity of the radiodensity inside the tumor models. An influence of the heterogeneity on accuracy and robustness of the image registration algorithms was not found., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Associazione Italiana di Fisica Medica e Sanitaria. Published by Elsevier Ltd. All rights reserved.)

Current medical imaging phantoms are usually limited by simplified geometry and radiographic skeletal homogeneity, which confines their usage for image quality assessment. In order to fabricate realistic imaging phantoms, replication of the entire tissue morphology and the associated CT numbers, defined as Hounsfield Unit (HU) is required. 3D printing is a promising technology for the production of medical imaging phantoms with accurate anatomical replication. So far, the majority of the imaging phantoms using 3D printing technologies tried to mimic the average HU of soft tissue human organs. One important aspect of the anthropomorphic imaging phantoms is also the replication of realistic radiodensities for bone tissues. In this study, we used filament printing technology to develop a CT-derived 3D printed thorax phantom with realistic bone-equivalent radiodensity using only one single commercially available filament. The generated thorax phantom geometry closely resembles a patient and includes direct manufacturing of bone structures while creating life-like heterogeneity within bone tissues. A HU analysis as well as a physical dimensional comparison were performed in order to evaluate the density and geometry agreement between the proposed phantom and the corresponding CT data. With the achieved density range (-482 to 968 HU) we could successfully mimic the realistic radiodensity of the bone marrow as well as the cortical bone for the ribs, vertebral body and dorsal vertebral column in the thorax skeleton. In addition, considering the large radiodensity range achieved a full thorax imaging phantom mimicking also soft tissues can become feasible. The physical dimensional comparison using both Extrema Analysis and Collision Detection methods confirmed a mean surface overlap of 90% and a mean volumetric overlap of 84,56% between the patient and phantom model. Furthermore, the reproducibility analyses revealed a good geometry and radiodensity duplicability in 24 printed cylinder replicas. Thus, according to our results, the proposed additively manufactured anthropomorphic thorax phantom has the potential to be efficiently used for validation of imaging- and radiation-based procedures in precision medicine., (Copyright © 2022. Published by Elsevier GmbH.)

The choice of materials challenges the development of Magnetic Resonance Imaging (MRI) phantoms and, to date, is mainly limited to water-filled compartments or gel-based components. Recently, solid materials have been introduced through additive manufacturing (AM) to mimic complex geometrical structures. Nonetheless, no such manufactured solid materials are available with controllable MRI contrast to mimic organ substructures or lesion heterogeneities. Here, we present a novel AM design that allows MRI contrast manipulation by varying the partial volume contribution to a ROI/voxel of MRI-visible material within an imaging object. Two sets of 11 cubes and three replicates of a spherical tumour model were designed and printed using AM. Most samples presented varying MRI-contrast in standard MRI sequences, based mainly on spin density and partial volume signal variation. A smooth and continuous MRI-contrast gradient could be generated in a single-compartment tumour model. This concept supports the development of more complex MRI phantoms that mimic the appearance of heterogeneous tumour tissues., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [The Medical University of Vienna has applied for a patent concerning the building technique of solid objects with variable MRI contrast. Ewald Unger and Ivo Rausch are quoted as inventors. The authors declare that the research was conducted without any further commercial or financial relationships that could be construed as a potential conflict of interest.], (Copyright © 2022. Published by Elsevier GmbH.)

Background: Vagus nerve stimulation (VNS) has gained great importance as a promising therapy for a myriad of diseases. Of particular interest is the therapy of cardiovascular diseases, such as heart failure or atrial fibrillation using selective cardiac VNS. However, there is still a lack of organ-specific anatomical knowledge about the fascicular anatomy and topography of the cardiac branch (CB), which diminishes the therapeutic possibilities for selective cardiac neuromodulation. Here, we established a topographical and anatomical map of the superior cardiac VN in two animal species to dissect cervical and cardiac VN morphology. Methods: Autonomic nerves including superior CBs were harvested from domestic pigs and New Zeeland rabbits followed by imaging with microcomputed tomography (µCT) and 3D rendering. The data were analyzed in terms of relevant topographical and anatomical parameters. Results: Our data showed that cardiac vagal fascicles remained separated from other VN fascicles up to 22.19 mm (IQR 14.02-41.30 mm) in pigs and 7.68 mm (IQR 4.06-12.77 mm) in rabbits from the CB point and then started merging with other fascicles. Exchanges of nerve fascicles between sympathetic trunk (ST) and VN were observed in 3 out of 11 nerves, which might cause additional unwanted effects in unselective VNS. Our 3D rendered digital model of the cardiac fascicles was generated showing that CB first remained on the medial side where it branched off the VN, as also shown in the µCT data of 11 pig nerves, and then migrated towards the ventromedial site the further it was traced cranially. Conclusion: Our data provided an anatomical map of the cardiac vagal branches including cervical VN and ST for future approaches of selective cardiac neurostimulation, indicating the best position of selective cardiac VNS just above the CB point., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Kronsteiner, Zopf, Heimel, Oberoi, Kramer, Slezak, Weninger, Podesser, Kiss and Moscato.)

Aim: Prisoners are at risk from a range of health related problems, caused by a number of factors. This study was conducted to assess the impact of incarceration on oral health among the prisoners of Haridwar District Jail, Uttarakhand state., Material and Method: A total of 573 inmates (534 males and 39 females) comprised the total study population. Oral health was examined with the Decayed, Missing, Filled Teeth (DMFT) index, and by measuring pocket depth (PD) and clinical attachment loss (CAL)., Results: The age of the study participants ranged between 18 to 90 years with a mean age of 46.14 ± 15.29 years. The overall mean DMFT score was 5.40±6.49, with a prevalence of 77%. A significant difference (P=0.001) was found when the mean score of DMFT was compared to the period of incarceration, where the highest mean score was 6.97±7.69 for 5-10 years., Discussion: There was a significant difference found for DMFT among inmates based on a period of incarceration. Gender and period of incarceration had no significant impact on the severity of periodontal diseases among jail inmates. Longitudinal studies are required to find out the causal association between incarceration and oral health. Comprehensive and timely oral health care is required for this vulnerable population., Conclusion: The level of oral disease among jail inmates was high. There was a significant difference for DMFT among inmates based on the period of incarceration.

Introduction: COVID-19 pandemic has imposed nation-wide lock-downs which severely impacted day-to-day lifestyle and caused anxiety, stress and fear among patients taking medical care including dental treatments. These psychological behaviors have also been observed during the strategic relaxation of social restrictions (Unlock). However, potential effect of these psychological behavior in endodontic cases have not been probed. Here, it is of great interest to explore the magnitude and buffering effect of two important psychological resources: satisfaction-with-life, and confidence in hospital-infection-control-policy in relation with COVID-19 risk perception on psychological impact due to fear for COVID-19., Methods: Patients visiting Dental Clinic & Research Center for endodontic procedures were randomly asked to fill survey questionnaire, and were later enrolled as per the study criteria. The study carried out in two phases: from 15 Sept 2020 to 15 Dec 2020 (restrained confinement; Unlock 1.0); and from 16 Dec 2020 to 12 Feb 2021 (mild confinement; Unlock 2.0) with total sample size of 136. We used data collection tools such as fear-of-COVID-19 scale (FCV-19), perceived-stress-scale (PSS), modified-dental-anxiety-scale (MDAS), satisfaction-with-life scale (SWLS), COVID-19 risk perception, and confidence in hospital-infection-control-policy for COVID-19., Results: A double moderation and dual moderated mediation structured model were used to establish the correlation of various parameters using SPSS (version 25.0) software suite. Confidence in hospital-infection-control-policy and SWLS were negatively correlated with FCV-19, MDAS, and PSS. Risk perception of COVID-19 was found to positively associated with FCV-19, MDAS, and PSS., Discussion: Patient's confidence in hospital-infection-control-policy for COVID-19 and SWLS acted as independent moderator for FCV-19 and mental distress. FCV-19 and risk perception were found to be lower during mild confinement (Unlock 2.0), and were also the positive predictors of PSS; and negative predictors of SWLS. The higher SWLS correlated very well with lower COVID-19 risk perception, concerning PSS and MDAS., Competing Interests: Acharya Balkrishna is an honorary trustee in Divya Yog Mandir Trust that governs Divya Pharmacy, Haridwar; and holds an honorary managerial position in Patanjali Ayurved Ltd., Haridwar, Uttarakhand, India. Divya Pharmacy and/or Patanjali Ayurved Ltd., Haridwar were not involved in any aspects of the study reported here. All other authors declare no conflicts of interests., (© 2022 Balkrishna et al.)

Background: Medical-imaging-based three-dimensional (3D) printed models enable improvement in skills training, surgical planning, and decision-making. This pilot study aimed to use multimodality imaging and to add and compare 3D ultrasound as a future standard to develop realistic neonatal brain models including the ventricular system., Methods: Retrospective computed tomography (CT), magnetic resonance imaging (MRI), and 3D ultrasound-based brain imaging protocols of five neonatal patients were analyzed and subsequently segmented with the aim of developing a multimodality imaging-based 3D printed model. The ventricular anatomy was analyzed to compare the MRI and 3D ultrasound modalities., Results: A realistic anatomical model of the neonatal brain, including the ventricular system, was created using MRI and 3D ultrasound data from one patient. T2-weighted isovoxel 3D MRI sequences were found to have better resolution and accuracy than 2D sequences. The surface area, anatomy, and volume of the lateral ventricles derived from both MRI and 3D ultrasound were comparable., Conclusions: We created an ultrasound- and MRI-based 3D printed patient-specific neonatal brain simulation model that can be used for perioperative management. To introduce 3D ultrasound as a standard for 3D models, additional dimensional correlations between MRI and ultrasound need to be examined., Impact: We studied the feasibility of implementing 3D ultrasound as a standard for 3D printed models of the neonatal brain. Different imaging modalities were compared and both 3D isotropic MRI and 3D ultrasound imaging are feasible for printing neonatal brain models with good dimensional accuracy and anatomical replication. Further dimensional correlations need to be defined to implement it as a standard to produce 3D printed models., (© 2021. The Author(s), under exclusive licence to the International Pediatric Research Foundation, Inc.)

Introduction: Thrombopoietin (TPO) being the major regulator of megakaryopoiesis is expected to show a compensatory increase in immune thrombocytopenia (ITP), however, it is not so observed. This study was undertaken to measure TPO levels in ITP and assesses its association with platelet count, megakaryocytes, and response to steroid therapy., Materials and Methods: A total of 41 cases of ITP and twenty controls with normal platelet count were enrolled in this prospective study. Complete blood count, bone marrow examination, and ELISA for serum TPO were measured. Response to steroid therapy was evaluated for thirty cases., Results: The TPO levels were increased in 80.5% of patients in comparison to the controls. The degree of rise, however, was variable. On analyzing low, normal, and high TPO levels with reference to platelet and megakaryocyte count no statistically significant difference was observed. Raised TPO levels were seen with significant lowering of functional megakaryocytes. The mean TPO levels in nonresponders were higher than responders but highly variable and statistically nonsignificant., Conclusion: Quantitative alterations in TPO are in a way regulated by qualitative efficacy of megakaryocytes rather than platelet or megakaryocyte count. Nonresponders with markedly increased TPO levels (due to qualitative megakaryocyte injury) are less likely to respond to TPO receptor agonist., Competing Interests: There are no conflicts of interest., (Copyright: © 2022 Asian Journal of Transfusion Science.)

A majority of Indian schoolchildren are biliterate in that they acquire literacy in at least two language systems, necessitating dyslexia assessment in both. The DALI-DAB assesses risk for dyslexia by evaluating reading ability and literacy-learning potential through a battery including literacy tests (letter and word reading, spelling, nonword reading, reading comprehension), and mediator skills (phonological awareness, processing automaticity and executive fluency, oral language) in multiple languages. DALI-DAB was developed in three languages - English, Hindi, and Marathi - and standardized on a sample of 1013 children. Reliability analyses revealed high internal consistency (α > 0.8) in most tests in all three languages. Low standard error of measurement values supported DALI-DAB score stability over repeated testing. Construct validity was variously reinforced through, (i) selection of culture-referenced, research-based tests, (ii) approval of test materials by schoolteachers (face validity) and (iii) grade-correlated performance increases on all DALI-DAB tests, besides robust correlations between (iv) literacy and mediator skill test scores (p < .001, concurrent validity), (v) equivalent tests across languages (p < .01, convergent validity), and (vi) DALI-DAB and WJ III ACH literacy scores (p < .01, criterion validity), in contrast to (vii) low correlation between DALI-DAB and WJ III ACH math scores (p > .05, discriminant validity). Overall, the DALI-DAB represents the first standardized dyslexia assessment tool for bilingual-biliterate children., (© 2021. The International Dyslexia Association.)

Objectives: LAY-FOMM is a promising material for FDA-approved Fused Deposition Modeling (FDM) applications in drug delivery. Here we investigated the impact on oral cells., Materials and Methods: We evaluated the impact of 3D-printed LAY-FOMM 40, LAY-FOMM 60, and biocompatible polylactic acid (PLA) on the activity of murine L929 cells, gingival fibroblasts (GF), and periodontal ligament fibroblasts (PDLF) using indirect (samples on cells), direct monolayer culture models (cells on samples), and direct spheroid cultures with resazurin-based toxicity assay, confirmed by MTT and Live-dead staining. The surface topography was evaluated with scanning electron microscopy., Results: The materials LAY-FOMM 40 and LAY-FOMM 60 led to a reduction in resazurin conversion in L929 cells, GF, and PDLF, higher than the impact of PLA in indirect and direct culture models. Fewer vital cells were found in the presence of LAY-FOMM 40 and 60 than PLA, in the staining in both models. In the direct model, LAY-FOMM 40 and PLA showed less impact on viability in the resazurin-based toxicity assay than in the indirect model. Spheroid microtissues showed a reduction of cell activity of GF and PDLF with LAY-FOMM 40 and 60., Conclusion: Overall, we found that LAY-FOMM 40 and LAY-FOMM 60 can reduce the activity of L292 and oral cells. Based on the results from the PLA samples, the direct model seems more reliable than the indirect model., Clinical Relevance: A material modification is desired in terms of biocompatibility as it can mask the effect of drugs and interfere with the function of the 3D-printed device.

Rabbit inhalation anesthesia by endotracheal intubation involves a higher risk among small animals owing to several anatomical and physiological features, which is pathognomonic to this species of lagomorphs. Rabbit-specific airway devices have been designed to prevent misguided intubation attempts. However, it is believed that expert anesthetic training could be a boon in limiting the aftermaths of this procedure. Our research is aimed to develop a novel biomimetic 3D printed rabbit airway model with representative biomechanical material behavior and radiodensity. Imaging data were collected for two sacrificed rabbit heads using micro-computed tomography (μCT) and micro-magnetic resonance imaging for the first head and cone beam computed tomography (CBCT) for the second head. Imaging-based life-size musculoskeletal airway models were printed using polyjet technology with a combination of hard and soft materials in replicates of three. The models were evaluated quantitatively for dimensional accuracy and radiodensity and qualitatively using digital microscopy and endoscopy for technical, tactic, and visual realism. The results displayed that simulation models printed with polyjet technology have an overall surface representation of 93% for μCT-based images and 97% for CBCT-based images within a range of 0.0-2.5 mm, with μCT showing a more detailed reproduction of the nasotracheal anatomy. Dimensional discrepancies can be caused due to inadequate support material removal and due to the limited reconstruction of microstructures from the imaging on the 3D printed model. The model showed a significant difference in radiodensities in hard and soft tissue regions. Endoscopic evaluation provided good visual and tactile feedback, comparable to the real animal. Overall, the model, being a practical low-cost simulator, comprehensively accelerates the learning curve of veterinary nasotracheal intubation and paves the way for 3D simulation-based image-guided interventional procedures., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2020 Oberoi, Eberspächer-Schweda, Hatamikia, Königshofer, Baumgartner, Kramer, Schaffarich, Agis, Moscato and Unger.)

Conventional medical imaging phantoms are limited by simplified geometry and radiographic skeletal homogeneity, which confines their usability for image quality assessment and radiation dosimetry. These challenges can be addressed by additive manufacturing technology, colloquially called 3D printing, which provides accurate anatomical replication and flexibility in material manipulation. In this study, we used Computed Tomography (CT)-based modified PolyJet TM 3D printing technology to print a hollow thorax phantom simulating skeletal morphology of the patient. To achieve realistic heterogenous skeletal radiation attenuation, we developed a novel radiopaque amalgamate constituting of epoxy, polypropylene and bone meal powder in twelve different ratios. We performed CT analysis for quantification of material radiodensity (in Hounsfield Units, HU) and for identification of specific compositions corresponding to the various skeletal structures in the thorax. We filled the skeletal structures with their respective radiopaque amalgamates. The phantom and isolated 3D printed rib specimens were rescanned by CT for reproducibility tests regarding verification of radiodensity and geometry. Our results showed that structural densities in the range of 42-705HU could be achieved. The radiodensity of the reconstructed phantom was comparable to the three skeletal structures investigated in a real patient thorax CT: ribs, ventral vertebral body and dorsal vertebral body. Reproducibility tests based on physical dimensional comparison between the patient and phantom CT-based segmentation displayed 97% of overlap in the range of 0.00-4.57 mm embracing the anatomical accuracy. Thus, the additively manufactured anthropomorphic thorax phantom opens new vistas for imaging- and radiation-based patient care in precision medicine., (Copyright © 2020 Hatamikia, Oberoi, Unger, Kronreif, Kettenbach, Buschmann, Figl, Knäusl, Moscato and Birkfellner.)

Objectives: The impact of kaolinite on human periodontal cells is yet unknown. The aim of the study was to assess the response of human periodontal cells to kaolinite., Methods: Human periodontal cells were treated with kaolinite at reducing concentrations from 30 to 0.0015 mg/mL and with conditioned medium, which was depleted of kaolinite. Cell viability was evaluated with a resazurin-based toxicity assay, Live-Dead staining, and MTT assay and staining. The pro-angiogenic factors vascular endothelial growth factor (VEGF) and interleukin (IL)-6 and IL-8 were quantified via ELISA in periodontal fibroblasts. L-929, a standard cell-line used for cytotoxicity studies, served as control cell line. Composition of kaolinite was verified using energy-dispersive X-ray spectroscopy., Results: Kaolinite in suspension but not in conditioned medium impaired cell viability dose-dependently. VEGF, IL-6, and IL-8 production was not substantially modulated by kaolinite or the conditioned medium in periodontal cells., Conclusion: Overall, kaolinite can decrease cell viability dose-dependently while conditioned medium showed no toxic effect. No pronounced impact of kaolinite on VEGF, IL-6, and IL-8 production was observed. This study provided first insights into the impact of kaolinite on human periodontal cells thereby inferring to the basis for the evaluation of kaolinite as a carrier in regenerative dentistry., Clinical Relevance: Kaolinite, a clay mineral, is successfully used in medicine due to its favorable properties. Also, applications in conservative dentistry are described. However, the response of oral cells to kaolinite is still unclear. Here, we assessed the impact of kaolinite on human periodontal cells.

Objectives: The factors that contribute to the morphological changes of dental pulp cell-derived microtissues are unknown. Here, we investigated the contraction dynamics of rod-shaped microtissues derived from dental pulp cells and examined the underlying cell signaling pathways., Methods: Human dental pulp cells were seeded into agarose molds to assemble into rod-shaped microtissues. Resazurin- and tetrazolium-based cytotoxicity assays, Live/Dead staining, and hematoxylin and eosin staining for histological evaluation of rods were performed. Rod contraction was evaluated and measured for a period of 10 days. The role of TGF-β, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen-activated protein kinase (MAPK) signaling pathway was analyzed., Results: Dental pulp cells readily assembled into rods, maintaining the geometric shape for 48 h. Following this period, they condensed to form stable spheroidal structures that remained vital for 10 days from seeding. Inhibition of phosphoinositide 3-kinase signaling pathway by LY294002 significantly prolonged the diminution in the length of rods formed by dental pulp cells. TGF-β and pharmacological inhibition of TGF-β signaling did not show pronounced effects., Conclusion: Overall, dental pulp cells readily formed rod-shaped patterns of microtissues which, over a period of time, condensed into more stable spheroidal structures. Hence, technologies like bioprinting, using direct fabrication of microtissues need to consider the contraction dynamics., Clinical Relevance: The field of regenerative endodontology will benefit from our findings as it can be applied as a novel platform to test the impact of pharmacological agents, biomaterials, and regenerative approaches including bioprinting.

Purpose: To reveal the impact of titanium dioxide-based scanning powder for intraoral digital impression on the biological activity of oral fibroblasts., Methods: Murine L929 cells and human periodontal ligament (PDLF) and gingival fibroblasts (GF) were treated with ten-fold serial dilutions of scanning powder and the corresponding conditioned medium (filtrate of overnight incubation of powder in medium) starting with 30mg/ml. Bicinchoninic acid protein assay, formazan- and resazurin-based toxicity assays, live/dead and annexin V/propidium iodide (PI) staining and immunoassays for interleukin (IL)-6 and IL-8 were performed. Powder composition was analyzed using energy dispersive X-ray spectroscopy (EDS)., Results: Formazan and resazurin conversion was lesser in L929 cells than PDLF and GF in the presence of scanning powder. Induction of cell death was caused by 30mg/ml of powder in L929 cells but not in PDLF and GF. No pronounced impact of the conditioned medium was seen in cytotoxicity assays or live/dead-, and annexin V/PI staining. In PDLF and GF IL-6 expression was increased by the powder, while there was a decrease in IL-8. Powder particles did not deplete protein from medium. EDS showed a heterogeneous mixture consisting predominantly of titanium dioxide., Conclusions: Scanning powder decreased cell activity and induced cell death in L929 cells at high concentrations. Human oral fibroblasts showed an increase in IL-6 levels but more resistance to the cytotoxicity of the powder. Within the limitations of an in vitro study our results suggest that proper cleaning after scanning is of clinical relevance to avoid potential unwanted effects of the powder., (Copyright © 2019 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.)

Tissue engineering strategies using microtissues as "building blocks" have high potential in regenerative medicine. Cognition of contraction dynamics involved in the in vitro self-assembly of these microtissues can be conceived as the bedrock of an effective periodontal tissue regenerative therapy. Our study was directed at evaluating the shrinkage in the rod-shaped structure of a directed self-assembly of human gingiva-derived cells (GC) and periodontal ligament-derived cells (PDLC) and developing insights into the potential mechanisms responsible for the shrinkage. GC and PDLC were seeded in non-adherent agarose molds to form rod microtissues. Cells used for the experiments were characterized using fluorescence-activated cell sorting (FACS). To assess the viability, resazurin-based cytotoxicity assays, trypan blue dye exclusion assay, MTT and live/dead staining, and histological evaluation of rods based on hematoxylin and eosin staining were performed. Rod contraction was evaluated and measured at 0, 2, 6, and 24 h and compared to L-929 cells. The role of transforming growth factor (TGF)-β signaling, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen activated protein kinase (MAPK) signaling was analyzed. Our results show that the rod microtissues were vital after 24 h. A reduction in the length of rods was seen in the 24 h period. While the recombinant TGF-β slightly reduced contraction, inhibition of TGF-β signaling did not interfere with the contraction of the rods. Interestingly, inhibition of phosphoinositide 3-kinase by LY294002 significantly delayed contraction in GC and PDLC rods. Overall, GC and PDLC have the ability to form rod microtissues which contract over time. Thus, approaches for application of these structures as "building blocks" for periodontal tissue regeneration should consider that rods have the capacity to contract substantially. Further investigation will be needed to unravel the mechanisms behind the dynamics of contraction.

This narrative review presents an overview on the currently available 3D printing technologies and their utilization in experimental, clinical and educational facets, from the perspective of different specialties of dentistry, including oral and maxillofacial surgery, orthodontics, endodontics, prosthodontics, and periodontics. It covers research and innovation, treatment modalities, education and training, employing the rapidly developing 3D printing process. Research-oriented advancement in 3D printing in dentistry is witnessed by the rising number of publications on this topic. Visualization of treatment outcomes makes it a promising clinical tool. Educational programs utilizing 3D-printed models stimulate training of dental skills in students and trainees. 3D printing has enormous potential to ameliorate oral health care in research, clinical treatment, and education in dentistry.

Hypoxia mimetic agents (HMAs) have been shown to have a positive influence on cellular functions in a multitude of tissue regenerative strategies. Novel experimental approaches use biomaterials as carriers for controlled delivery of these HMAs. Here, the cytotoxic aspects of biocompatibility are of key relevance. The MTT assay is widely used to evaluate cytotoxicity and proliferation. Based on the implications from the proceeding research we hypothesized that specific HMAs such as deferoxamine at high concentrations can interfere with the MTT assay. Thus, the aim of this study was to test the repercussions of the HMAs dimethyloxalylglycine, deferoxamine, L-mimosine, and CoCl 2 on the validity of the MTT assay. Murine MC3T3-E1 cells were cultured in serum-free alphaMEM and in alphaMEM supplemented with 10 % fetal bovine serum with the HMAs dimethyloxalylglycine, deferoxamine, L-mimosine, and CoCl 2 , respectively, at 3 mM-0.3 mM for 24 h (experimental groups). Cells without HMAs served as control (control groups). The same experiments were performed with medium and phosphate buffered saline (PBS) without cells. In all settings MTT solution was added to PBS-washed or unwashed culture plates for the last two hours of the incubation period. Then MTT solution was removed and dimethyl sulfoxide was added to dissolve the formazan crystals and absorption was measured. Our data show that the presence of deferoxamine can interfere with the MTT assay if not removed before the addition of MTT. This is particularly important when evaluating cell viability in setups where deferoxamine-loaded biomaterials are used.

Objective: To examine evidence suggesting a potential role for transcranial magnetic stimulation (TMS) in the treatment of chronic pain., Conclusion: Chronic pain is characterized by brain changes that can reasonably be presumed to be associated with hyperalgesia, as occurs with neuropathic changes in the periphery. TMS has the ability to induce plastic changes in the cortex at the site of stimulation and at connected sites, including the spinal cord. It also has the ability to influence the experience of experimental/acute pain. In studies of TMS in chronic pain, there is some evidence that temporary relief can be achieved in a proportion of sufferers. Chronic pain is common. Current treatments are often ineffective and complicated by side-effects. Work to this point is encouraging, but systematic assessment of stimulation parameters is necessary if TMS is to achieve a role in the treatment of chronic pain. Maintenance TMS is currently provided in relapsing major depression and may be a useful model in chronic pain management.

There is some evidence that repetitive transcranial magnetic stimulation (rTMS) can alleviate the experience of chronic pain. The mechanisms by which rTMS may induce pain relief, however, are unknown. The present study examined whether a session of rTMS would produce sensory threshold changes in healthy individuals. Detection and pain thresholds for cold sensations were compared following low frequency (1 Hz) (Experiment 1) and high frequency (20 Hz) (Experiment 2) repetitive TMS. While cold detection threshold was significantly lowered by both rTMS rates, only high frequency rTMS produced a significant change in cold pain threshold. In contrast, sham rTMS did not alter thresholds for cold stimuli. These findings provide evidence that sensory thresholds can be influenced by repetitive transcranial magnetic stimulation.

Objective: The objective of this study was to make an argument in favour of the inclusion of psychiatrists on chronic pain clinic teams., Method: The argument takes the form of answers to four central questions: (i) does pain involve an emotional experience; (ii) do psychiatric disorders accompany chronic pain; (iii) can psychiatric disorders present as chronic pain; and (iv) which patients present to pain units, and what do we know of their personalities?, Results: The affirmative case was substantiated in respect of the first three questions. In examining the last question, evidence indicates that patients who present to chronic pain units frequently have personality features that make assessment and therapy difficult., Conclusions: Psychiatry is the field of medicine where practitioners have the most experience with emotional states and personality, and is the only field where they have specialized skills in the diagnosis and treatment of psychiatric disorders. Psychiatry has much to offer in chronic pain management and chronic pain management teams should include a psychiatrist. This conclusion has resourcing and training implications.

Transcranial magnetic stimulation (TMS) is a new technology which uses electromagnetic principles to produce small electrical currents in the cortex. Evidence indicates that TMS can produce plastic changes in the CNS which are observable at both the cellular and physiological levels. It is proposed that studies are justified to determine whether TMS can provide short-term or long-term relief in chronic pain.