Search

During the COVID-19 pandemic, it became evident that the effectiveness of applying intervention measures is significantly influenced by societal acceptance, which, in turn, is affected by the processes of opinion formation. This article explores one among the many possibilities of a coupled opinion-epidemic system. The findings reveal either intricate periodic patterns or chaotic dynamics, leading to substantial fluctuations in opinion distribution and, consequently, significant variations in the total number of infections over time. Interestingly, the model is exhibiting the protective pattern., Comment: 18 pages, 9 figures

In this study, we present an integro-differential model to simulate the local spread of infections. The model incorporates a standard susceptible-infected-recovered (\textit{SIR}-) model enhanced by an integral kernel, allowing for non-homogeneous mixing between susceptibles and infectives. We define requirements for the kernel function and derive analytical results for both the \textit{SIR}- and a reduced susceptible-infected-susceptible (\textit{SIS}-) model, especially the uniqueness of solutions. In order to optimize the balance between disease containment and the social and political costs associated with lockdown measures, we set up requirements for the implementation of control function, and show examples for three different formulations for the control: continuous and time-dependent, continuous and space- and time-dependent, and piecewise constant space- and time-dependent. Latter represent reality more closely as the control cannot be updated for every time and location. We found the optimal control values for all of those setups, which are by nature best for a continuous and space-and time dependent control, yet found reasonable results for the discrete setting as well. To validate the numerical results of the integro-differential model, we compare them to an established agent-based model that incorporates social and other microscopical factors more accurately and thus acts as a benchmark for the validity of the integro-differential approach. A close match between the results of both models validates the integro-differential model as an efficient macroscopic proxy. Since computing an optimal control strategy for agent-based models is computationally very expensive, yet comparatively cheap for the integro-differential model, using the proxy model might have interesting implications for future research.

In this study, we present an integro-differential model to simulate the local spread of infections. The model incorporates a standard susceptible-infected-recovered (\textit{SIR}-) model enhanced by an integral kernel, allowing for non-homogeneous mixing between susceptibles and infectives. We define requirements for the kernel function and derive analytical results for both the \textit{SIR}- and a reduced susceptible-infected-susceptible (\textit{SIS}-) model, especially the uniqueness of solutions. In order to optimize the balance between disease containment and the social and political costs associated with lockdown measures, we set up requirements for the implementation of control functions, and show examples for continuous and time-dependent, continuous and space- and time-dependent, and piecewise constant space- and time-dependent controls. Latter represent reality more closely as the control cannot be updated for every time and location. We found the optimal control values for all of those setups, which are by nature best for a continuous and space-and time dependent control, yet found reasonable results for the discrete setting as well. To validate the numerical results of the integro-differential model, we compare them to an established agent-based model that incorporates social and other microscopical factors more accurately and thus acts as a benchmark for the validity of the integro-differential approach. A close match between the results of both models validates the integro-differential model as an efficient macroscopic proxy. Since computing an optimal control strategy for agent-based models is computationally very expensive, yet comparatively cheap for the integro-differential model, using the proxy model might have interesting implications for future research.

Undetected partial discharges (PDs) are a safety critical issue in high voltage (HV) gas insulated systems (GIS). While the diagnosis of PDs under AC voltage is well-established, the analysis of PDs under DC voltage remains an active research field. A key focus of these investigations is the classification of different PD sources to enable subsequent sophisticated analysis. In this paper, we propose and analyze a neural network-based approach for classifying PD signals caused by metallic protrusions and conductive particles on the insulator of HVDC GIS, without relying on pulse sequence analysis features. In contrast to previous approaches, our proposed model can discriminate the studied PD signals obtained at negative and positive potentials, while also generalizing to unseen operating voltage multiples. Additionally, we compare the performance of time- and frequency-domain input signals and explore the impact of different normalization schemes to mitigate the influence of free-space path loss between the sensor and defect location., Comment: 8 pages, submitted to IEEE Transactions on Power Delivery

Households play an important role in disease dynamics. Many infections happening there due to the close contact, while mitigation measures mainly target the transmission between households. Therefore, one can see households as boosting the transmission depending on household size. To study the effect of household size and size distribution, we differentiated the within and between household reproduction rate. There are basically no preventive measures, and thus the close contacts can boost the spread. We explicitly incorporated that typically only a fraction of all household members are infected. Thus, viewing the infection of a household of a given size as a splitting process generating a new, small fully infected sub-household and a remaining still susceptible sub-household we derive a compartmental ODE-model for the dynamics of the sub-households. In this setting, the basic reproduction number as well as prevalence and the peak of an infection wave in a population with given households size distribution can be computed analytically. We compare numerical simulation results of this novel household-ODE model with results from an agent--based model using data for realistic household size distributions of different countries. We find good agreement of both models showing the catalytic effect of large households on the overall disease dynamics., Comment: 17 pages,10 figures

An epidemic model where disease transmission can occur either through global contacts or through local, nearest neighbor interactions is considered. The classical SIR--model describing the global interactions is extended by adding additional equations for the density of local pairs in different epidemic states. A locality parameter $p\in [0,1]$ characterizes the probability of global or local infections. The equilibria of the resulting model are analyzed in dependence of the locality parameter and the transmission rate of the pathogen. An explicit expression for the reproduction number in terms of the locality parameter and the disease parameters is obtained. Transient simulations confirm these findings. Neighboring pairs of one infected and one susceptible can be considered as active pairs, since local transmission of the disease can only occur in that situation. Our analysis shows, that the fraction of active pairs is minimal for intermediate values of the locality parameter.

Currently, due to the COVID-19 pandemic the public life in most European countries stopped almost completely due to measures against the spread of the virus. Efforts to limit the number of new infections are threatened by the advent of new variants of the SARS-COV-2 virus, most prominent the B.1.1.7 strain with higher infectivity. In this article we consider a basic two-strain SIR model to explain the spread of those variants in Germany on small time scales. For a linearized version of the model we calculate relevant variables like the time of minimal infections or the dynamics of the share of variants analytically. These analytical approximations and numerical simulations are in a good agreement to data reported by the Robert Koch Institute (RKI) in Germany.

Since the beginning of the corona pandemic in March 2020, various parameters for describing the spread of the disease have been specified for Germany in addition to the daily infection figures (new infections and total infections), which are also used for political decisions. In addition to excess mortality and the weekly incidence, these include the doubling time $T_2$ and the reproduction number $R_t$. For the latter, various estimates can be found on the website of the Robert-Koch-Institute, see \cite{EstR:RKI}, which are calculated from the case numbers for all of Germany; local differences are not taken into account here. In the present article, the calculations of the RKI on a local level are examined using the example of northern Rhineland-Palatinate and its districts. Here, not the reporting date but the onset of illness is used as a reference for the calculation of $R_t$. For cases where the onset of illness is not known, an adjusted generalized extreme value distribution (GEV) is first fitted to the data for which the reporting delay (difference between the onset of illness and the reporting date) is available and examined for further characteristics such as local as well as demographic differences. This GEV distribution is then used to calculate the reporting delays of incomplete data points. The calculation of the daily value of $R_t$ between the end of February and the end of October showed a similar course of the reproductive rate compared to the nationwide figures. Expectably larger statistical fluctuations were observed in the summer, mainly due to lower case numbers. The values for northern Rhineland-Palatinate have been consistently above $1$ since about mid-September. The calculations can also be transferred to other regions and administrative districts., Comment: 16 pages, 23 figures, in German

In this paper, we developed a mathematical model for the sedimentation process of small particles in a lid-driven cavity flow with an obstacle to model the transport of microplastic particles in rivers. A stationary incompressible Navier-Stokes simulation at moderate Reynolds-numbers provides the background flow field. Spherical particles are injected into this flow field and their equation of motion is solved to determine the number of particles that sediment on the surface of the obstacle. To capture the effect of typical biological organisms and biofilms on the bottom surface of river beds, the obstacle can exert an attraction force onto the particles. Various simulations and parameter studies are carried out to determine the influence of the obstacle geometry, particle densities, and the attraction force on the sedimentation process., Comment: 18 pages, 14 figures, 4 tables

Since the end of 2019 an outbreak of a new strain of coronavirus, called 2019--nCoV, is reported from China and later other parts of the world. Since January 21, WHO reports daily data on confirmed cases and deaths from both China and other countries. In this work we present some discrete and continuous models to discribe the disease dynamics in China and estimate the needed epidemiological parameters. Good agreement with the current dynamics has be found for both a discrete transmission model and a slightly modified SIR-model., Comment: 8 pages, 7 gigures

There are nowadays a huge load of publications about dengue epidemic models, which mostly employ deterministic differential equations. The analytical properties of deterministic models are always of particular interest by many experts, but their validity - if they can indeed track some empirical data - is an increasing demand by many practitioners. In this view, the data can tell to which figure the solutions yielded from the models should be; they drift all the involving parameters towards the most appropriate values. By prior understanding of the population dynamics, some parameters with inherently constant values can be estimated forthwith; some others can sensibly be guessed. However, solutions from such models using sets of constant parameters most likely exhibit, if not smoothness, at least noise-free behavior; whereas the data appear very random in nature. Therefore, some parameters cannot be constant as the solutions to seemingly appear in a high correlation with the data. We were aware of impracticality to solve a deterministic model many times that exhaust all trials of the parameters, or to run its stochastic version with Monte Carlo strategy that also appeals for a high number of solving processes. We were also aware that those aforementioned non-constant parameters can potentially have particular relationships with several extrinsic factors, such as meteorology and socioeconomics of the human population. We then study an estimation of time-space-varying parameters within the framework of variational calculus and investigate how some parameters are related to some extrinsic factors. Numerical results for some examples with real data are shown and discussed in details.