Search

Moisture adsorption and desorption isotherms of gelatin extracted from whitefish skin powder (FSGP) at different temperatures across a wide range of water activity were determined along with their thermodynamic properties. Nine mathematical models were utilized for fitting the experimental data and simulating the adsorption and desorption behavior. The thermodynamic properties were determined and fitted to the experimental data. The results showed that Peleg and GAB models were the best fit for FSGP. The energies involved in the adsorption and desorption process of FSGP indicated a stronger dependence on equilibrium moisture content (Xe). When Xe decreased, there was a consistent trend of increasing thermodynamic properties. Both the moisture adsorption and desorption behaviors of FSGP were, therefore, non-spontaneous processes. Linear correlations between the changes in enthalpy and entropy for adsorption and desorption were observed, indicating the presence of enthalpy–entropy compensation for FSGP. For preserving FSGP quality, it should be stored with Xw ≤ 8 (gw/gdm, d.b.) at temperatures below 53 °C and an RH of 50% to avoid it becoming rubbery. These findings are crucial for providing insight into the optimal drying and storage conditions. [ABSTRACT FROM AUTHOR]

Huge quantities of palm tree residues are available annually in Saudi Arabia; they are often disposed of by burning, leading to large environmental pollution and health problems. Enclosed composting may be a successful method for utilizing these residues. Effective composting in a rotary bioreactor depends on the composting materials and the frequencies of the rotation–aeration process. Here, we attempted to determine the optimal method for composting these residues in a bioreactor. Four identical pilot-scale bioreactors (D1–D4) were used. The respective aeration–rotation frequencies were continuous (D1), and 20 min per 1 h (D2), 2 h (D3), and 3 h (D4); the rotation speed of the bioreactors was 3 rpm. Three periods were analyzed; their names and their respective lengths for D1, D2, D3, and D4 were as follows: the lag period was 10 h for each, the mesophilic periods were 13, 14, 89, and 231 h, and the thermophilic periods were 0, 55, 71, and 17 h. The peak compost temperatures (Tc, max) for D1, D2, and D3 were 65.2, 57.2, and 46.9 °C, and were achieved at 36, 71, and 108 h of operation, respectively. In D1, Tc quickly declined after reaching Tc, max due to limited microbial activity at Tc > 60 °C. In D2, a Tc of 50–57.2 °C was maintained for 61 h, and the highest organic matter degradation (OMD) of 0.30 was achieved. During the composting period, the carbon to nitrogen (C/N) ratio and moisture contents (MC) remained in the optimal ranges for microorganisms and did not affect the composting process. The results indicated that combined aeration–rotation for 20 min every hour (D2) gave the best results for composting palm tree residues, it ensured the hygiene safety of the end product, and it also consumed less power for aeration and rotation than D1. [ABSTRACT FROM AUTHOR]